Reading /proc/slabinfo or monitoring slabtop(1) can become very
expensive if there are many slab caches and if there are very lengthy
per-node partial and/or free lists.

Commit 07a63c41 ("mm/slab: improve performance of gathering slabinfo
stats") addressed the per-node full lists which showed a significant
improvement when no objects were freed.  This patch has the same
motivation and optimizes the remainder of the usecases where there are
very lengthy partial and free lists.

This patch maintains per-node active_slabs (full and partial) and
free_slabs rather than iterating the lists at runtime when reading
/proc/slabinfo.

When allocating 100GB of slab from a test cache where every slab page is
on the partial list, reading /proc/slabinfo (includes all other slab
caches on the system) takes ~247ms on average with 48 samples.

As a result of this patch, the same read takes ~0.856ms on average.

[rientjes@google.com: changelog]
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1611081505240.13403@chino.kir.corp.google.comSigned-off-by: NGreg Thelen <gthelen@google.com>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Verify that kmem_create_cache flags are not allocator specific.  It is
done before removing flags that are not available with the current
configuration.

The current kmem_cache_create removes incorrect flags but do not
validate the callers are using them right.  This change will ensure that
callers are not trying to create caches with flags that won't be used
because allocator specific.

Link: http://lkml.kernel.org/r/1478553075-120242-2-git-send-email-thgarnie@google.comSigned-off-by: NThomas Garnier <thgarnie@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The slub allocator gives us some incorrect warnings when
CONFIG_PROFILE_ANNOTATED_BRANCHES is set, as the unlikely() macro
prevents it from seeing that the return code matches what it was before:

  mm/slub.c: In function `kmem_cache_free_bulk':
  mm/slub.c:262:23: error: `df.s' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  mm/slub.c:2943:3: error: `df.cnt' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  mm/slub.c:2933:4470: error: `df.freelist' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  mm/slub.c:2943:3: error: `df.tail' may be used uninitialized in this function [-Werror=maybe-uninitialized]

I have not been able to come up with a perfect way for dealing with
this, the three options I see are:

 - add a bogus initialization, which would increase the runtime overhead
 - replace unlikely() with unlikely_notrace()
 - remove the unlikely() annotation completely

I checked the object code for a typical x86 configuration and the last
two cases produce the same result, so I went for the last one, which is
the simplest.

Link: http://lkml.kernel.org/r/20161024155704.3114445-1-arnd@arndb.deSigned-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

synchronize_sched() is a heavy operation and calling it per each cache
owned by a memory cgroup being destroyed may take quite some time.  What
is worse, it's currently called under the slab_mutex, stalling all works
doing cache creation/destruction.

Actually, there isn't much point in calling synchronize_sched() for each
cache - it's enough to call it just once - after setting cpu_partial for
all caches and before shrinking them.  This way, we can also move it out
of the slab_mutex, which we have to hold for iterating over the slab
cache list.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=172991
Link: http://lkml.kernel.org/r/0a10d71ecae3db00fb4421bcd3f82bcc911f4be4.1475329751.git.vdavydov.dev@gmail.comSigned-off-by: NVladimir Davydov <vdavydov.dev@gmail.com>
Reported-by: NDoug Smythies <dsmythies@telus.net>
Acked-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Creating a lot of cgroups at the same time might stall all worker
threads with kmem cache creation works, because kmem cache creation is
done with the slab_mutex held.  The problem was amplified by commits
801faf0d ("mm/slab: lockless decision to grow cache") in case of
SLAB and 81ae6d03 ("mm/slub.c: replace kick_all_cpus_sync() with
synchronize_sched() in kmem_cache_shrink()") in case of SLUB, which
increased the maximal time the slab_mutex can be held.

To prevent that from happening, let's use a special ordered single
threaded workqueue for kmem cache creation.  This shouldn't introduce
any functional changes regarding how kmem caches are created, as the
work function holds the global slab_mutex during its whole runtime
anyway, making it impossible to run more than one work at a time.  By
using a single threaded workqueue, we just avoid creating a thread per
each work.  Ordering is required to avoid a situation when a cgroup's
work is put off indefinitely because there are other cgroups to serve,
in other words to guarantee fairness.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=172981
Link: http://lkml.kernel.org/r/20161004131417.GC1862@esperanzaSigned-off-by: NVladimir Davydov <vdavydov.dev@gmail.com>
Reported-by: NDoug Smythies <dsmythies@telus.net>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

CURRENT_TIME is not y2038 safe.

Use y2038 safe ktime_get_real_seconds() here for timestamps.  struct
heartbeat_block's hb_seq and deletetion time are already 64 bits wide
and accommodate times beyond y2038.

Also use y2038 safe ktime_get_real_ts64() for on disk inode timestamps.
These are also wide enough to accommodate time64_t.

Link: http://lkml.kernel.org/r/1475365298-29236-1-git-send-email-deepa.kernel@gmail.comSigned-off-by: NDeepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

struct timespec is not y2038 safe.  Use time64_t which is y2038 safe to
represent orphan scan times.  time64_t is sufficient here as only the
seconds delta times are relevant.

Also use appropriate time functions that return time in time64_t format.
Time functions now return monotonic time instead of real time as only
delta scan times are relevant and these values are not persistent across
reboots.

The format string for the debug print is still using long as this is
only the time elapsed since the last scan and long is sufficient to
represent this value.

Link: http://lkml.kernel.org/r/1475365138-20567-1-git-send-email-deepa.kernel@gmail.comSigned-off-by: NDeepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In ocfs2_lock_refcount_tree, if ocfs2_read_refcount_block() returns an
error, we do ocfs2_refcount_tree_put twice (once in
ocfs2_unlock_refcount_tree and once outside it), thereby reducing the
refcount of the refcount tree twice, but we dont delete the tree in this
case.  This will make refcnt of the tree = 0 and the
ocfs2_refcount_tree_put will eventually call ocfs2_mark_lockres_freeing,
setting OCFS2_LOCK_FREEING for the refcount_tree->rf_lockres.

The error returned by ocfs2_read_refcount_block is propagated all the
way back and for next iteration of write, ocfs2_lock_refcount_tree gets
the same tree back from ocfs2_get_refcount_tree because we havent
deleted the tree.  Now we have the same tree, but OCFS2_LOCK_FREEING is
set for rf_lockres and eventually, when _ocfs2_lock_refcount_tree is
called in this iteration, BUG_ON( __ocfs2_cluster_lock:1395 ERROR:
Cluster lock called on freeing lockres T00000000000000000386019775b08d!
flags 0x81) is triggerred.

Call stack:

  (loop16,11155,0):ocfs2_lock_refcount_tree:482 ERROR: status = -5
  (loop16,11155,0):ocfs2_refcount_cow_hunk:3497 ERROR: status = -5
  (loop16,11155,0):ocfs2_refcount_cow:3560 ERROR: status = -5
  (loop16,11155,0):ocfs2_prepare_inode_for_refcount:2111 ERROR: status = -5
  (loop16,11155,0):ocfs2_prepare_inode_for_write:2190 ERROR: status = -5
  (loop16,11155,0):ocfs2_file_write_iter:2331 ERROR: status = -5
  (loop16,11155,0):__ocfs2_cluster_lock:1395 ERROR: bug expression:
  lockres->l_flags & OCFS2_LOCK_FREEING

  (loop16,11155,0):__ocfs2_cluster_lock:1395 ERROR: Cluster lock called on
  freeing lockres T00000000000000000386019775b08d! flags 0x81

  kernel BUG at fs/ocfs2/dlmglue.c:1395!

  invalid opcode: 0000 [#1] SMP  CPU 0
  Modules linked in: tun ocfs2 jbd2 xen_blkback xen_netback xen_gntdev .. sd_mod crc_t10dif ext3 jbd mbcache
  RIP: __ocfs2_cluster_lock+0x31c/0x740 [ocfs2]
  RSP: e02b:ffff88017c0138a0  EFLAGS: 00010086
  Process loop16 (pid: 11155, threadinfo ffff88017c010000, task ffff8801b5374300)
  Call Trace:
     ocfs2_refcount_lock+0xae/0x130 [ocfs2]
     __ocfs2_lock_refcount_tree+0x29/0xe0 [ocfs2]
     ocfs2_lock_refcount_tree+0xdd/0x320 [ocfs2]
     ocfs2_refcount_cow_hunk+0x1cb/0x440 [ocfs2]
     ocfs2_refcount_cow+0xa9/0x1d0 [ocfs2]
     ocfs2_prepare_inode_for_refcount+0x115/0x200 [ocfs2]
     ocfs2_prepare_inode_for_write+0x33b/0x470 [ocfs2]
     ocfs2_file_write_iter+0x220/0x8c0 [ocfs2]
     aio_write_iter+0x2e/0x30

Fix this by avoiding the second call to ocfs2_refcount_tree_put()

Link: http://lkml.kernel.org/r/1473984404-32011-1-git-send-email-ashish.samant@oracle.comSigned-off-by: NAshish Samant <ashish.samant@oracle.com>
Reviewed-by: NEric Ren <zren@suse.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

'page' parameter in ocfs2_write_end_nolock() is never used.

Link: http://lkml.kernel.org/r/582FD91A.5000902@huawei.comSigned-off-by: NJun Piao <piaojun@huawei.com>
Reviewed-by: NJoseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When 'dispatch_assert' is set, 'response' must be DLM_MASTER_RESP_YES,
and 'res' won't be null, so execution can't reach these two branch.

Link: http://lkml.kernel.org/r/58174C91.3040004@huawei.comSigned-off-by: NJun Piao <piaojun@huawei.com>
Reviewed-by: NJoseph Qi Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The variable `set_maybe' is redundant when the mle has been found in the
map.  So it is ok to set the node_idx into mle's maybe_map directly.

Link: http://lkml.kernel.org/r/71604351584F6A4EBAE558C676F37CA4A3D490DD@H3CMLB12-EX.srv.huawei-3com.comSigned-off-by: NGuozhonghua <guozhonghua@h3c.com>
Reviewed-by: NMark Fasheh <mfasheh@versity.com>
Reviewed-by: NJoseph Qi <jiangqi903@gmail.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The value of 'stage' must be between 1 and 2, so the switch can't reach
the default case.

Link: http://lkml.kernel.org/r/57FB5EB2.7050002@huawei.comSigned-off-by: NJun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If request_irq() fails it passes the error to the caller.  The caller
now checks it and jumps to the common error path on failure.

Link: http://lkml.kernel.org/r/1474237304-897-3-git-send-email-sudipm.mukherjee@gmail.comSigned-off-by: NSudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use a common error path for the failure.

Link: http://lkml.kernel.org/r/1474237304-897-2-git-send-email-sudipm.mukherjee@gmail.comSigned-off-by: NSudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While building m32r allmodconfig we were getting warning:

  drivers/pcmcia/m32r_pcc.c:331:2: warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result

request_irq() can fail and we should always be checking the result from
it. Check the result and return it to the caller.

Link: http://lkml.kernel.org/r/1474237304-897-1-git-send-email-sudipm.mukherjee@gmail.comSigned-off-by: NSudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While building m32r defconfig we got warnings:

  arch/m32r/platforms/m32700ut/setup.c:249:24: warning: 'm32700ut_lcdpld_irq_type' defined but not used [-Wunused-variable]

m32700ut_lcdpld_irq_type is only used when CONFIG_USB is enabled.
Modify the code to declare the related variables and functions only when
CONFIG_USB is enabled.

Link: http://lkml.kernel.org/r/1479244406-7507-1-git-send-email-sudipm.mukherjee@gmail.comSigned-off-by: NSudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some builds of m32r were failing as it tried to build few drivers which
needed dma but m32r is not having dma support.  Objections were raised
when it was tried to make those drivers depend on HAS_DMA.  So the next
best thing is to add dma support to m32r.  dma_noop is a very simple dma
with 1:1 memory mapping.

Link: http://lkml.kernel.org/r/1475949198-31623-1-git-send-email-sudipm.mukherjee@gmail.comSigned-off-by: NSudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When SUBARCH is "omap1" or "omap2", plat-omap/ directory must be
indexed.  Handle this special case properly.

While at it, check if mach- directory exists at all.

Link: http://lkml.kernel.org/r/20161202122148.15001-1-joe.skb7@gmail.comSigned-off-by: NSam Protsenko <semen.protsenko@linaro.org>
Cc: Michal Marek <mmarek@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Every often used regex is better be compiled in Python.

Speedup is about ~9.8% (whee!)

    $ perf stat -r 16 taskset -c 15 ./scripts/bloat-o-meter ../vmlinux-000 ../obj/vmlinux >/dev/null
    7.091202853 seconds time elapsed                         ( +-  0.15% )

    +re.compile
    6.397564973 seconds time elapsed                         ( +-  0.34% )

Link: http://lkml.kernel.org/r/20161119004417.GB1200@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

readlines() conses whole list before doing anything which is slower for
big object files.  Use per line iterator.

Speed up is ~2% on "allyesconfig" type of kernel.

    $ perf stat -r 16 taskset -c 15 ./scripts/bloat-o-meter ../vmlinux-000 ../obj/vmlinux >/dev/null
	...

  Before:  7.247708646 seconds time elapsed                ( +-  0.28% )
  After:   7.091202853 seconds time elapsed                ( +-  0.15% )

Link: http://lkml.kernel.org/r/20161119004143.GA1200@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This limitation came with the reason to remove "another way for
malicious code to obscure a compromised program and masquerade as a
benign process" by allowing "security-concious program can use this
prctl once during its early initialization to ensure the prctl cannot
later be abused for this purpose":

    http://marc.info/?l=linux-kernel&m=133160684517468&w=2

This explanation doesn't look sufficient.  The only thing "exe" link is
indicating is the file, used to execve, which is basically nothing and
not reliable immediately after process has returned from execve system
call.

Moreover, to use this feture, all the mappings to previous exe file have
to be unmapped and all the new exe file permissions must be satisfied.

Which means, that changing exe link is very similar to calling execve on
the binary.

The need to remove this limitations comes from migration of NFS mount
point, which is not accessible during restore and replaced by other file
system.  Because of this exe link has to be changed twice.

[akpm@linux-foundation.org: fix up comment]
Link: http://lkml.kernel.org/r/20160927153755.9337.69650.stgit@localhost.localdomainSigned-off-by: NStanislav Kinsburskiy <skinsbursky@virtuozzo.com>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When commit fbae2d44 ("kthread: add kthread_create_worker*()")
introduced some kthread_create_...() functions which were taking
printf-like parametter, it introduced __printf attributes to some
functions (e.g.  kthread_create_worker()).  Nevertheless some new
functions were forgotten (they have been detected thanks to
-Wmissing-format-attribute warning flag).

Add the missing __printf attributes to the newly-introduced functions in
order to detect formatting issues at build-time with -Wformat flag.

Link: http://lkml.kernel.org/r/20161126193543.22672-1-nicolas.iooss_linux@m4x.orgSigned-off-by: NNicolas Iooss <nicolas.iooss_linux@m4x.org>
Reviewed-by: NPetr Mladek <pmladek@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull x86 RAS updates from Ingo Molnar:
 "The main changes in this development cycle were:

   - more AMD northbridge support work, mostly in preparation for Fam17h
     CPUs (Yazen Ghannam, Borislav Petkov)

   - cleanups/refactorings and fixes (Borislav Petkov, Tony Luck,
     Yinghai Lu)"

* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Include the PPIN in MCE records when available
  x86/mce/AMD: Add system physical address translation for AMD Fam17h
  x86/amd_nb: Add SMN and Indirect Data Fabric access for AMD Fam17h
  x86/amd_nb: Add Fam17h Data Fabric as "Northbridge"
  x86/amd_nb: Make all exports EXPORT_SYMBOL_GPL
  x86/amd_nb: Make amd_northbridges internal to amd_nb.c
  x86/mce/AMD: Reset Threshold Limit after logging error
  x86/mce/AMD: Fix HWID_MCATYPE calculation by grouping arguments
  x86/MCE: Correct TSC timestamping of error records
  x86/RAS: Hide SMCA bank names
  x86/RAS: Rename smca_bank_names to smca_names
  x86/RAS: Simplify SMCA HWID descriptor struct
  x86/RAS: Simplify SMCA bank descriptor struct
  x86/MCE: Dump MCE to dmesg if no consumers
  x86/RAS: Add TSC timestamp to the injected MCE
  x86/MCE: Do not look at panic_on_oops in the severity grading

Pull hotplug API fix from Ingo Molnar:
 "Late breaking fix from the v4.9 cycle: fix a hotplug register/
  unregister notifier API asymmetry bug that can cause kernel warnings
  (and worse) with certain Kconfig combinations"

* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  hotplug: Make register and unregister notifier API symmetric

Pull scheduler updates from Ingo Molnar:
 "The main scheduler changes in this cycle were:

   - support Intel Turbo Boost Max Technology 3.0 (TBM3) by introducig a
     notion of 'better cores', which the scheduler will prefer to
     schedule single threaded workloads on. (Tim Chen, Srinivas
     Pandruvada)

   - enhance the handling of asymmetric capacity CPUs further (Morten
     Rasmussen)

   - improve/fix load handling when moving tasks between task groups
     (Vincent Guittot)

   - simplify and clean up the cputime code (Stanislaw Gruszka)

   - improve mass fork()ed task spread a.k.a. hackbench speedup (Vincent
     Guittot)

   - make struct kthread kmalloc()ed and related fixes (Oleg Nesterov)

   - add uaccess atomicity debugging (when using access_ok() in the
     wrong context), under CONFIG_DEBUG_ATOMIC_SLEEP=y (Peter Zijlstra)

   - implement various fixes, cleanups and other enhancements (Daniel
     Bristot de Oliveira, Martin Schwidefsky, Rafael J. Wysocki)"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
  sched/core: Use load_avg for selecting idlest group
  sched/core: Fix find_idlest_group() for fork
  kthread: Don't abuse kthread_create_on_cpu() in __kthread_create_worker()
  kthread: Don't use to_live_kthread() in kthread_[un]park()
  kthread: Don't use to_live_kthread() in kthread_stop()
  Revert "kthread: Pin the stack via try_get_task_stack()/put_task_stack() in to_live_kthread() function"
  kthread: Make struct kthread kmalloc'ed
  x86/uaccess, sched/preempt: Verify access_ok() context
  sched/x86: Make CONFIG_SCHED_MC_PRIO=y easier to enable
  sched/x86: Change CONFIG_SCHED_ITMT to CONFIG_SCHED_MC_PRIO
  x86/sched: Use #include <linux/mutex.h> instead of #include <asm/mutex.h>
  cpufreq/intel_pstate: Use CPPC to get max performance
  acpi/bus: Set _OSC for diverse core support
  acpi/bus: Enable HWP CPPC objects
  x86/sched: Add SD_ASYM_PACKING flags to x86 ITMT CPU
  x86/sysctl: Add sysctl for ITMT scheduling feature
  x86: Enable Intel Turbo Boost Max Technology 3.0
  x86/topology: Define x86's arch_update_cpu_topology
  sched: Extend scheduler's asym packing
  sched/fair: Clean up the tunable parameter definitions
  ...

Pull perf updates from Ingo Molnar:
 "This update is pretty big and almost exclusively includes tooling
  changes, because v4.9's LTS status forced to completion most of the
  pending kernel side hardware enablement work and because we tried to
  freeze core perf work a bit to give a time window for the fuzzing
  efforts.

  The diff is large mostly due to the JSON hardware event tables added
  for Intel and Power8 CPUs. This was a popular feature request from
  people working close to hardware and from the HPC community.

  Tree size is big because this added the CPU event tables for over a
  decade of Intel CPUs. Future changes for a CPU vendor alrady support
  should be much smaller, as events for new models are added. The new
  events are listed in 'perf list', for the CPU model the tool is
  running on. If you find an interesting event it can be used as-is:

      $ perf stat -a -e l2_lines_out.pf_clean sleep 1

      Performance counter stats for 'system wide':

            7,860,403      l2_lines_out.pf_clean

           1.000624918 seconds time elapsed

  The event lists can be searched the usual 'perf list' fashion for
  (case insensitive) substrings as well:

      $ perf list l2_lines_out

      List of pre-defined events (to be used in -e):

      cache:
        l2_lines_out.demand_clean
             [Clean L2 cache lines evicted by demand]
        l2_lines_out.demand_dirty
             [Dirty L2 cache lines evicted by demand]
        l2_lines_out.dirty_all
             [Dirty L2 cache lines filling the L2]
        l2_lines_out.pf_clean
             [Clean L2 cache lines evicted by L2 prefetch]
        l2_lines_out.pf_dirty
             [Dirty L2 cache lines evicted by L2 prefetch]

  etc.

  There's a few high level categories as well that can be listed:
  'cache', 'floating point', 'frontend', 'memory', 'pipeline', 'virtual
  memory'.

  Existing generic events and workflows should work as-is.

  The only kernel side change is a late breaking fix for an older
  regression, related to Intel BTS, LBR and PT feature interaction.

  On the tooling side there are three new tools / major features:

   - The new 'perf c2c' tool provides means for Shared Data C2C/HITM
     analysis.

     This allows you to track down cacheline contention. The tool is
     based on x86's load latency and precise store facility events
     provided by Intel CPUs.

     It was tested by Joe Mario and has proven to be useful, finding
     some cacheline contentions. Joe also wrote a blog about c2c tool
     with examples:

        https://joemario.github.io/blog/2016/09/01/c2c-blog/

     excerpt of the content on this site:

         At a high level, “perf c2c” will show you:

          * The cachelines where false sharing was detected.
          * The readers and writers to those cachelines, and the offsets where those accesses occurred.
          * The pid, tid, instruction addr, function name, binary object name for those readers and writers.
          * The source file and line number for each reader and writer.
          * The average load latency for the loads to those cachelines.
          * Which numa nodes the samples a cacheline came from and which CPUs were involved.

         Using perf c2c is similar to using the Linux perf tool today.
         First collect data with “perf c2c record”, then generate a
         report output with “perf c2c report”

     There one finds extensive details on using the tool, with tips on
     reducing the volume of samples while still capturing enough to do
     its job. (Dick Fowles, Joe Mario, Don Zickus, Jiri Olsa)

   - The new 'perf sched timehist' tool provides tailored analysis of
     scheduling events.

     Example usage:

          perf sched record -- sleep 1
          perf sched timehist

     By default it shows the individual schedule events, including the
     wait time (time between sched-out and next sched-in events for the
     task), the task scheduling delay (time between wakeup and actually
     running) and run time for the task:

            time    cpu  task name         wait time  sch delay  run time
                         [tid/pid]            (msec)     (msec)    (msec)
        -------- ------  ----------------  ---------  ---------  --------
        1.874569 [0011]  gcc[31949]            0.014      0.000     1.148
        1.874591 [0010]  gcc[31951]            0.000      0.000     0.024
        1.874603 [0010]  migration/10[59]      3.350      0.004     0.011
        1.874604 [0011]  <idle>                1.148      0.000     0.035
        1.874723 [0005]  <idle>                0.016      0.000     1.383
        1.874746 [0005]  gcc[31949]            0.153      0.078     0.022
      ...

     Times are in msec.usec. (David Ahern, Namhyung Kim)

   - Add CPU vendor hardware event tables:

     Add JSON files with vendor event naming for Intel and Power8
     processors, allowing users of tools like oprofile to keep using the
     event names they are used to, as well as people reading vendor
     documentation, where such naming is used. (Andi Kleen, Sukadev
     Bhattiprolu)

     You should see all the new events with 'perf list' and you should
     be able to search them, for example 'perf list miss' will list all
     the myriads of miss events.

  Other tooling features added were:

   - Cross-arch annotation support:

     o Improve ARM support in the annotation code, affecting 'perf
       annotate', 'perf report' and live annotation in 'perf top' (Kim
       Phillips)

     o Initial support for PowerPC in the annotation code (Ravi
       Bangoria)

     o Support AArch64 in the 'annotate' code, native/local and
       cross-arch/remote (Kim Phillips)

   - Allow considering just events in a given time interval, via the
     '--time start.s.ms,end.s.ms' command line, added to 'perf kmem',
     'perf report', 'perf sched timehist' and 'perf script' (David
     Ahern)

   - Add option to stop printing a callchain at one of a given group of
     symbol names (David Ahern)

   - Track memory freed in 'perf kmem stat' (David Ahern)

   - Allow querying and setting .perfconfig variables (Taeung Song)

   - Show branch information in callchains (predicted, TSX aborts, loop
     iteractions, etc) (Jin Yao)

   - Dynamicly change verbosity level by pressing 'V' in the 'perf
     top/report' hists TUI browser (Alexis Berlemont)

   - Implement 'perf trace --delay' in the same fashion as in 'perf
     record --delay', to skip sampling workload initialization events
     (Alexis Berlemont)

   - Make vendor named events case insensitive in 'perf list', i.e.
     'perf list LONGEST_LAT' works just the same as 'perf list
     longest_lat' (Andi Kleen)

   - Add unwinding support for jitdump (Stefano Sanfilippo)

  Tooling infrastructure changes:

   - Support linking perf with clang and LLVM libraries, initially
     statically, but this limitation will be lifted and shared
     libraries, when available, will be preferred to the static build,
     that should, as with other features, be enabled explicitly (Wang
     Nan)

   - Add initial support (and perf test entry) for tooling hooks,
     starting with 'record_start' and 'record_end', that will have as
     its initial user the eBPF infrastructure, where perf_ prefixed
     functions will be JITed and run when such hooks are called (Wang
     Nan)

   - Implement assorted libbpf improvements (Wang Nan)"

  ... and lots of other changes, features, cleanups and refactorings I
  did not list, see the shortlog and the git log for details"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (220 commits)
  perf/x86: Fix exclusion of BTS and LBR for Goldmont
  perf tools: Explicitly document that --children is enabled by default
  perf sched timehist: Cleanup idle_max_cpu handling
  perf sched timehist: Handle zero sample->tid properly
  perf callchain: Introduce callchain_cursor__copy()
  perf sched: Cleanup option processing
  perf sched timehist: Improve error message when analyzing wrong file
  perf tools: Move perf build related variables under non fixdep leg
  perf tools: Force fixdep compilation at the start of the build
  perf tools: Move PERF-VERSION-FILE target into rules area
  perf build: Check LLVM version in feature check
  perf annotate: Show raw form for jump instruction with indirect target
  perf tools: Add non config targets
  perf tools: Cleanup build directory before each test
  perf tools: Move python/perf.so target into rules area
  perf tools: Move install-gtk target into rules area
  tools build: Move tabs to spaces where suitable
  tools build: Make the .cmd file more readable
  perf clang: Compile BPF script using builtin clang support
  perf clang: Support compile IR to BPF object and add testcase
  ...

Pull mm/PAT cleanup from Ingo Molnar:
 "A single cleanup for a generic interface that was originally
  introduced for PAT"

* 'mm-pat-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/pat, mm: Make track_pfn_insert() return void

Pull locking updates from Ingo Molnar:
 "The tree got pretty big in this development cycle, but the net effect
  is pretty good:

    115 files changed, 673 insertions(+), 1522 deletions(-)

  The main changes were:

   - Rework and generalize the mutex code to remove per arch mutex
     primitives. (Peter Zijlstra)

   - Add vCPU preemption support: add an interface to query the
     preemption status of vCPUs and use it in locking primitives - this
     optimizes paravirt performance. (Pan Xinhui, Juergen Gross,
     Christian Borntraeger)

   - Introduce cpu_relax_yield() and remov cpu_relax_lowlatency() to
     clean up and improve the s390 lock yielding machinery and its core
     kernel impact. (Christian Borntraeger)

   - Micro-optimize mutexes some more. (Waiman Long)

   - Reluctantly add the to-be-deprecated mutex_trylock_recursive()
     interface on a temporary basis, to give the DRM code more time to
     get rid of its locking hacks. Any other users will be NAK-ed on
     sight. (We turned off the deprecation warning for the time being to
     not pollute the build log.) (Peter Zijlstra)

   - Improve the rtmutex code a bit, in light of recent long lived
     bugs/races. (Thomas Gleixner)

   - Misc fixes, cleanups"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  x86/paravirt: Fix bool return type for PVOP_CALL()
  x86/paravirt: Fix native_patch()
  locking/ww_mutex: Use relaxed atomics
  locking/rtmutex: Explain locking rules for rt_mutex_proxy_unlock()/init_proxy_locked()
  locking/rtmutex: Get rid of RT_MUTEX_OWNER_MASKALL
  x86/paravirt: Optimize native pv_lock_ops.vcpu_is_preempted()
  locking/mutex: Break out of expensive busy-loop on {mutex,rwsem}_spin_on_owner() when owner vCPU is preempted
  locking/osq: Break out of spin-wait busy waiting loop for a preempted vCPU in osq_lock()
  Documentation/virtual/kvm: Support the vCPU preemption check
  x86/xen: Support the vCPU preemption check
  x86/kvm: Support the vCPU preemption check
  x86/kvm: Support the vCPU preemption check
  kvm: Introduce kvm_write_guest_offset_cached()
  locking/core, x86/paravirt: Implement vcpu_is_preempted(cpu) for KVM and Xen guests
  locking/spinlocks, s390: Implement vcpu_is_preempted(cpu)
  locking/core, powerpc: Implement vcpu_is_preempted(cpu)
  sched/core: Introduce the vcpu_is_preempted(cpu) interface
  sched/wake_q: Rename WAKE_Q to DEFINE_WAKE_Q
  locking/core: Provide common cpu_relax_yield() definition
  locking/mutex: Don't mark mutex_trylock_recursive() as deprecated, temporarily
  ...

Pull EFI updates from Ingo Molnar:
 "The main changes in this development cycle were:

   - Implement EFI dev path parser and other changes to fully support
     thunderbolt devices on Apple Macbooks (Lukas Wunner)

   - Add RNG seeding via the EFI stub, on ARM/arm64 (Ard Biesheuvel)

   - Expose EFI framebuffer configuration to user-space, to improve
     tooling (Peter Jones)

   - Misc fixes and cleanups (Ivan Hu, Wei Yongjun, Yisheng Xie, Dan
     Carpenter, Roy Franz)"

* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/libstub: Make efi_random_alloc() allocate below 4 GB on 32-bit
  thunderbolt: Compile on x86 only
  thunderbolt, efi: Fix Kconfig dependencies harder
  thunderbolt, efi: Fix Kconfig dependencies
  thunderbolt: Use Device ROM retrieved from EFI
  x86/efi: Retrieve and assign Apple device properties
  efi: Allow bitness-agnostic protocol calls
  efi: Add device path parser
  efi/arm*/libstub: Invoke EFI_RNG_PROTOCOL to seed the UEFI RNG table
  efi/libstub: Add random.c to ARM build
  efi: Add support for seeding the RNG from a UEFI config table
  MAINTAINERS: Add ARM and arm64 EFI specific files to EFI subsystem
  efi/libstub: Fix allocation size calculations
  efi/efivar_ssdt_load: Don't return success on allocation failure
  efifb: Show framebuffer layout as device attributes
  efi/efi_test: Use memdup_user() as a cleanup
  efi/efi_test: Fix uninitialized variable 'rv'
  efi/efi_test: Fix uninitialized variable 'datasize'
  efi/arm*: Fix efi_init() error handling
  efi: Remove unused include of <linux/version.h>

Pull SMP bootup updates from Ingo Molnar:
 "Three changes to unify/standardize some of the bootup message printing
  in kernel/smp.c between architectures"

* 'core-smp-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  kernel/smp: Tell the user we're bringing up secondary CPUs
  kernel/smp: Make the SMP boot message common on all arches
  kernel/smp: Define pr_fmt() for smp.c

Pull RCU updates from Ingo Molnar:
 "The main RCU changes in this development cycle were:

   - Miscellaneous fixes, including a change to call_rcu()'s rcu_head
     alignment check.

   - Security-motivated list consistency checks, which are disabled by
     default behind DEBUG_LIST.

   - Torture-test updates.

   - Documentation updates, yet again just simple changes"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  torture: Prevent jitter from delaying build-only runs
  torture: Remove obsolete files from rcutorture .gitignore
  rcu: Don't kick unless grace period or request
  rcu: Make expedited grace periods recheck dyntick idle state
  torture: Trace long read-side delays
  rcu: RCU_TRACE enables event tracing as well as debugfs
  rcu: Remove obsolete comment from __call_rcu()
  rcu: Remove obsolete rcu_check_callbacks() header comment
  rcu: Tighten up __call_rcu() rcu_head alignment check
  Documentation/RCU: Fix minor typo
  documentation: Present updated RCU guarantee
  bug: Avoid Kconfig warning for BUG_ON_DATA_CORRUPTION
  lib/Kconfig.debug: Fix typo in select statement
  lkdtm: Add tests for struct list corruption
  bug: Provide toggle for BUG on data corruption
  list: Split list_del() debug checking into separate function
  rculist: Consolidate DEBUG_LIST for list_add_rcu()
  list: Split list_add() debug checking into separate function

Pull CRIS updates from Jesper Nilsson:
 "Three patches for minor issues"

* tag 'cris-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris:
  cris: No need to append -O2 and $(LINUXINCLUDE)
  tty: serial: make crisv10 explicitly non-modular
  cris: Only build flash rescue image if CONFIG_ETRAX_AXISFLASHMAP is selected

Pull Openrisc updates from Stafford Horne:

 - changes to MAINTAINER for openrisc

 - probably biggest actual change is the move to memblock from bootmem

 - ... plus several bug and build fixes

* tag 'openrisc-for-linus' of git://github.com/openrisc/linux:
  openrisc: prevent VGA console, fix builds
  openrisc: include l.swa in check for write data pagefault
  openrisc: Updates after openrisc.net has been lost
  openrisc: Consolidate setup to use memblock instead of bootmem
  openrisc: remove the redundant of_platform_populate
  openrisc: add NR_CPUS Kconfig default value
  openrisc: Support both old (or32) and new (or1k) toolchain
  openrisc: Add thread-local storage (TLS) support
  openrisc: restore all regs on rt_sigreturn
  openrisc: fix PTRS_PER_PGD define

Pull m68k updates from Geert Uytterhoeven:
 "Use seq_puts() for fixed strings"

* tag 'm68k-for-v4.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k/atari: Use seq_puts() in atari_get_hardware_list()
  m68k/amiga: Use seq_puts() in amiga_get_hardware_list()

Pull AVR32 updates from Hans-Christian Noren Egtvedt.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
  avr32: wire up pkey syscalls
  AVR32-pio: Replace two seq_printf() calls by seq_puts() in pio_bank_show()
  AVR32-pio: Use seq_putc() in pio_bank_show()
  AVR32-clock: Combine nine seq_printf() calls into one call in clk_show()
  AVR32-clock: Use seq_putc() in two functions

Pull m68knommu updates from Greg Ungerer:
 "There are two sets of changes in this pull.

  The largest is the addition of the ColdFire platform side i2c support
  (the IO addressing, setup and clock definitions). The i2c hardware
  module itself is driven by the kernels existing iMX i2c driver.

  The other change is the addition of support for the Amcore board"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: AMCORE board, add iMX i2c support
  m68k: add Sysam AMCORE open board support
  m68knommu: platform support for i2c devices on ColdFire SoC

Pull sparc updates from David Miller:
 "Just a bunch of small cleanups and fixes here, and support for user
  probes from Allen Pais"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: fix a building error reported by kbuild
  sparc64: fix typo in pgd_clear()
  sparc64: restore irq in error paths in iommu
  sparc: leon: Fix a retry loop in leon_init_timers()
  sparc64: make string buffers large enough
  sparc64: move dereference after check for NULL
  sparc: kernel: use builtin_platform_driver
  sparc64:Support User Probes for sparc

Pull networking updates from David Miller:

 1) Platform regulatory domain support for ath10k, from Bartosz
    Markowski.

 2) Centralize min/max MTU checking, thus removing tons of duplicated
    code all of the the various drivers. From Jarod Wilson.

 3) Support ingress actions in act_mirred, from Shmulik Ladkani.

 4) Improve device adjacency tracking, from David Ahern.

 5) Add support for LED triggers on PHY link state changes, from Zach
    Brown.

 6) Improve UDP socket memory accounting, from Paolo Abeni.

 7) Set SK_MEM_QUANTUM to a fixed size of 4096, instead of PAGE_SIZE.
    From Eric Dumazet.

 8) Collapse TCP SKBs at retransmit time even if the right side SKB has
    frags. Also from Eric Dumazet.

 9) Add IP_RECVFRAGSIZE and IPV6_RECVFRAGSIZE cmsgs, from Willem de
    Bruijn.

10) Support routing by UID, from Lorenzo Colitti.

11) Handle L3 domain binding (ie. VRF) for RAW sockets, from David
    Ahern.

12) tcp_get_info() can run lockless, from Eric Dumazet.

13) 4-tuple UDP hashing in SFC driver, from Edward Cree.

14) Avoid reorders in GRO code, from Eric Dumazet.

15) IPV6 Segment Routing support, from David Lebrun.

16) Support MPLS push and pop for L3 packets in openvswitch, from Jiri
    Benc.

17) Add LRU datastructure support for BPF, Martin KaFai Lau.

18) VF support in liquidio driver, from Raghu Vatsavayi.

19) Multiqueue support in alx driver, from Tobias Regnery.

20) Networking cgroup BPF support, from Daniel Mack.

21) TCP chronograph measurements, from Francis Yan.

22) XDP support for qed driver, from Yuval Mintz.

23) BPF based lwtunnels, from Thomas Graf.

24) Consistent FIB dumping to offloading drivers, from Ido Schimmel.

25) Many optimizations for UDP under high load, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits)
  netfilter: nft_counter: rework atomic dump and reset
  e1000: use disable_hardirq() for e1000_netpoll()
  i40e: don't truncate match_method assignment
  net: ethernet: ti: netcp: add support of cpts
  net: phy: phy drivers should not set SUPPORTED_[Asym_]Pause
  net: l2tp: ppp: change PPPOL2TP_MSG_* => L2TP_MSG_*
  net: l2tp: deprecate PPPOL2TP_MSG_* in favour of L2TP_MSG_*
  net: l2tp: export debug flags to UAPI
  net: ethernet: stmmac: remove private tx queue lock
  net: ethernet: sxgbe: remove private tx queue lock
  net: bridge: shorten ageing time on topology change
  net: bridge: add helper to set topology change
  net: bridge: add helper to offload ageing time
  net: nicvf: use new api ethtool_{get|set}_link_ksettings
  net: ethernet: ti: cpsw: sync rates for channels in dual emac mode
  net: ethernet: ti: cpsw: re-split res only when speed is changed
  net: ethernet: ti: cpsw: combine budget and weight split and check
  net: ethernet: ti: cpsw: don't start queue twice
  net: ethernet: ti: cpsw: use same macros to get active slave
  net: mvneta: select GENERIC_ALLOCATOR
  ...

OpenRISC does not support VGA console, so prevent that kconfig symbol
from being enabled for OpenRISC, thus fixing these build errors:

   drivers/built-in.o: In function `vgacon_save_screen':
   vgacon.c:(.text+0x20e0): undefined reference to `screen_info'
   vgacon.c:(.text+0x20e8): undefined reference to `screen_info'
   drivers/built-in.o: In function `vgacon_init':
   vgacon.c:(.text+0x284c): undefined reference to `screen_info'
   vgacon.c:(.text+0x2850): undefined reference to `screen_info'
   drivers/built-in.o: In function `vgacon_startup':
   vgacon.c:(.text+0x28d8): undefined reference to `screen_info'
   drivers/built-in.o:vgacon.c:(.text+0x28f0): more undefined references to `screen_info' follow
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Cc: Chen Gang <gang.chen@asianux.com>
Cc: Jonas Bonn <jonas@southpole.se>
Signed-off-by: NStafford Horne <shorne@gmail.com>

During page fault handling we check the last instruction to understand
if the fault was for a read or for a write.  By default we fall back to
read.  New instructions were added to the openrisc 1.1 spec for an
atomic load/store pair (l.lwa/l.swa).

This patch adds the opcode for l.swa (0x33) allowing it to be treated as
a write operation.
Signed-off-by: NStefan Kristiansson <stefan.kristiansson@saunalahti.fi>
[shorne@gmail.com: expanded a bit on the comment]
Signed-off-by: NStafford Horne <shorne@gmail.com>