This patch adds all necessary header files and Kbuild plumbing for the
core driver for Silicon Laboratories Si476x series of AM/FM tuner
chips.

The driver as a whole is implemented as an MFD device and this patch
adds a core portion of it that provides all the necessary
functionality to the two other drivers that represent radio and audio
codec subsystems of the chip.
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Tahvo is a multi-function device on Nokia 770, implementing USB
transceiver and charge/battery control.

It's so close to Retu that a single driver can support both.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

As requested by Samuel Ortiz <sameo@linux.intel.com>, revert
this patch.

This reverts commit 3f8ec5df.

Conflicts:
	drivers/mfd/Kconfig
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Ordering so many Kconfig alphabetically makes it a lot easier to read e.g.
from menuconfig.
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Provides support for 1801 variant of stmpe gpio port expanders.
This chip has 18 gpios configurable as GPI, GPO, keypad matrix,
special key or dedicated key function.

Note that special/dedicated key function is not supported yet.
Signed-off-by: NJean-Nicolas Graux <jean-nicolas.graux@stericsson.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Twelve Kconfig symbols, all related to WM8350, WM8351, and WM8352, are
unused. Commit 19d57ed5 ("mfd: Remove
custom wm8350 cache implementation") removed all their (actual) users.
Remove these symbols too.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

The Kconfig entry for DA9055 PMIC Support selects PMIC_DA9055. That was
probably inspired by the similar select statement in the entry for
DA9052/53 PMIC with I2C. But the DA9055 PMIC only comes in an I2C
variant and its driver doesn't need a separate Kconfig symbol for shared
code. In any case, this select can be dropped as PMIC_DA9055 doesn't
exist.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Move the AB8500 Kconfig fragment below the AB3100 so the
menuconfig menu gets hierarchically nested and looks nice.
Having the EZX PCAP in the middle disturbs the nice
hierarchical layout from kconfig.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

This patch allow using syscon driver from the platform data, i.e.
possibility using driver on systems without oftree support.
For search syscon device from the client drivers,
"syscon_regmap_lookup_by_pdevname" function was added.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

CONFIG_MFD_CROS_EC requires CONFIG_MFD_CORE for a couple of functions that
are declared but not defined:

	ERROR: "mfd_remove_devices" [drivers/mfd/cros_ec.ko] undefined!
	ERROR: "mfd_add_devices" [drivers/mfd/cros_ec.ko] undefined!

Fix it by selecting CONFIG_MFD_CORE anytime CONFIG_MFD_CROS_EC is enabled.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

This uses a SPI bus to talk to the ChromeOS EC. The protocol
is defined by the EC and is fairly simple, with a length byte,
checksum, command byte and version byte (to permit easy creation
of new commands).
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

This uses an I2C bus to talk to the ChromeOS EC. The protocol
is defined by the EC and is fairly simple, with a length byte,
checksum, command byte and version byte (to permit easy creation
of new commands).
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NChe-Liang Chiou <clchiou@chromium.org>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

This is the base EC implementation, which provides a high level
interface to the EC for use by the rest of the kernel. The actual
communcations is dealt with by a separate protocol driver which
registers itself with this interface.

Interrupts are passed on through a notifier.

A simple message structure is used to pass messages to the
protocol driver.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Signed-off-by: NChe-Liang Chiou <clchiou@chromium.org>
Signed-off-by: NJonathan Kliegman <kliegs@chromium.org>
Signed-off-by: NLuigi Semenzato <semenzato@chromium.org>
Signed-off-by: NOlof Johansson <olofj@chromium.org>
Signed-off-by: NVincent Palatin <vpalatin@chromium.org>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

radio-si476x depends on SND and SND_SOC, the mfd driver should select
REGMAP_I2C.
Also fix a small compile warning in a debug message:
drivers/mfd/si476x-i2c.c: In function ‘si476x_core_drain_rds_fifo’:
drivers/mfd/si476x-i2c.c:391:4: warning: field width specifier ‘*’ expects argument of type ‘int’, but argument 4 has type ‘long unsigned int’ [-Wformat]
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch adds all necessary header files and Kbuild plumbing for the
core driver for Silicon Laboratories Si476x series of AM/FM tuner
chips.
The driver as a whole is implemented as an MFD device and this patch
adds a core portion of it that provides all the necessary
functionality to the two other drivers that represent radio and audio
codec subsystems of the chip.
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The pm8921 driver has been broken for a while now, but was prevented
from compiling because the SSBI bus driver was missing.  Now that SSBI
is present, pm8921 causes compile fails.

Until the pm8921 driver is fixed, mark it as BROKEN to prevent
compiles from failing.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NDavid Brown <davidb@codeaurora.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Although the SSBI sub is currently only used on MSM SoCs, it is still
a bus in its own right.  Remove this msm_ prefix from the driver and
it's symbols.  Clients can now refer directly to ssbi_write() and
ssbi_read().
Signed-off-by: NDavid Brown <davidb@codeaurora.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes below build error when CONFIG_POWER_SUPPLY is not set.

drivers/built-in.o: In function `ab8500_power_off':
drivers/mfd/ab8500-sysctrl.c:37: undefined reference to `power_supply_get_by_name'
drivers/mfd/ab8500-sysctrl.c:53: undefined reference to `power_supply_get_by_name'
make: *** [vmlinux] Error 1
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

A lot of mfd drivers select MFD_CORE which however depends on
GENERIC_HARDIRQS support.
So add the missing dependency to all drivers to get rid of
this link error:

ERROR: "irq_create_mapping" [drivers/mfd/mfd-core.ko] undefined!
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

TPS65910 mfd driver uses functions that are only avaiable when
REGMAP_IRQ is enabled. So "select REGMAP_IRQ" is added to mfd
Kconfig to fix below build error:

drivers/built-in.o: In function `tps65910_irq_exit':
/media/anil/kernel/drivers/mfd/tps65910.c:265: undefined reference to `regmap_del_irq_chip'
drivers/built-in.o: In function `tps65910_irq_init':
/media/anil/kernel/drivers/mfd/tps65910.c:254: undefined reference to `regmap_add_irq_chip'
drivers/built-in.o: In function `tps65910_i2c_probe':
/media/anil/kernel/drivers/mfd/tps65910.c:509: undefined reference to `regmap_irq_get_domain'
make: *** [vmlinux] Error 1
Signed-off-by: NAnilKumar Ch <anilkumar@ti.com>
Tested-by: NMatt Porter <mporter@ti.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Fix the build error:

  drivers/built-in.o: In function `twl_probe':
  drivers/mfd/twl-core.c:1256: undefined reference to `devm_regmap_init_i2c'
  make: *** [vmlinux] Error 1
Signed-off-by: Nliu chuansheng <chuansheng.liu@intel.com>
Acked-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
[ Samuel is busy, taking it directly  - Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This driver uses regmap_irq APIs, thus need to select REGMAP_IRQ.
IRQ_DOMAIN will be selected if select REGMAP_IRQ, thus remove it here.

This fixes below build errors:

drivers/built-in.o: In function `tps80031_remove':
drivers/mfd/tps80031.c:534: undefined reference to `regmap_del_irq_chip'
drivers/built-in.o: In function `tps80031_irq_init':
drivers/mfd/tps80031.c:305: undefined reference to `regmap_add_irq_chip'
drivers/built-in.o: In function `tps80031_probe':
drivers/mfd/tps80031.c:496: undefined reference to `regmap_irq_get_domain'
drivers/mfd/tps80031.c:512: undefined reference to `regmap_del_irq_chip'
make: *** [vmlinux] Error 1
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Acked-by: NLaxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

This fixes below build error:

drivers/built-in.o: In function `tps65090_i2c_probe':
drivers/mfd/tps65090.c:180: undefined reference to `regmap_add_irq_chip'
drivers/mfd/tps65090.c:190: undefined reference to `regmap_irq_chip_get_base'
drivers/mfd/tps65090.c:203: undefined reference to `regmap_del_irq_chip'
drivers/built-in.o: In function `tps65090_i2c_remove':
drivers/mfd/tps65090.c:213: undefined reference to `regmap_del_irq_chip'
make: *** [vmlinux] Error 1
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

AS3711 is a PMIC with multiple DCDC and LDO power supplies, GPIOs, an RTC,
a battery charger and a general purpose ADC. This patch adds support for
the MFD with support for a regulator driver and a backlight driver.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Retu is a multi-function device found on Nokia Internet Tablets
implementing at least watchdog, RTC, headset detection and power button
functionality.

This patch implements minimum functionality providing register access,
IRQ handling and power off functions.
Acked-by: NFelipe Balbi <balbi@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

TPS80031/ TPS80032 Fully Integrated Power Management with Power
Path and Battery Charger. The device provides five configurable
step-down converters, 11 general purpose LDOs, USB OTG Module,
ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with
Power Path from USB, 32K clock generator.

Add the mfd core driver for TPS80031/TPS80032.
Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com>
Reviwed-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Signed-off-by: NDavide Ciminaghi <ciminaghi@gnudd.com>
Acked-by: NAlessandro Rubini <rubini@gnudd.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Add mfd driver for Nano River Technologies viperboard.
Signed-off-by: NLars Poeschel <poeschel@lemonage.de>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

We need to include MFD_CORE if this option is enabled, otherwise we get
build errors.

Cc: Wei WANG <wei_wang@realsil.com.cn>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Realtek PCI-E card reader driver adapts requests from upper-level
sdmmc/memstick layer to the real physical card reader.
Signed-off-by: NWei WANG <wei_wang@realsil.com.cn>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Tested-by: NBorislav Petkov <bp@alien8.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Moving regulator node parsing to regulator driver in place
of parsing it on mfd driver.
The motivation for this change are:
- MFD core driver should not depends on regulator and able
  to instantiate device without regulator.
- The API for matching regulators are in regulator core and
  it is good that regulator driver only calls this API.
- Regulator specific support should be in regulator driver only
  to ease any enhancement/modification for regulators.
- The regulator driver is now registered as mfd sub device and
  all regulator registration is done from single probe call.
Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

With regmap_irq it is possible to remove the twl6040-irq.c file and
simplify the code.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

The realtek driver use the MFD core API and thus must select MFD_CORE.
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Realtek PCI-E card reader driver adapts requests from upper-level
sdmmc/memstick layer to the real physical card reader.
Signed-off-by: NWei WANG <wei_wang@realsil.com.cn>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Tested-by: NBorislav Petkov <bp@alien8.de>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Add the mfd core driver which supports touchscreen
and ADC.
With this patch we are only adding infrastructure to
support the MFD clients.
Signed-off-by: NPatil, Rachna <rachna@ti.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Versatile Express platform has an elaborated configuration system,
consisting of microcontrollers residing on the mother- and
daughterboards known as Motherboard/Daughterboard Configuration
Controller (MCC and DCC). The controllers are responsible for
the platform initialization (reset generation, flash programming,
FPGA bitfiles loading etc.) but also control clock generators,
voltage regulators, gather environmental data like temperature,
power consumption etc. Even the video output switch (FPGA) is
controlled that way.

Those devices are _not_ visible in the main address space and
the usual communication channel uses some kind of a bridge in
the peripheral block sending commands (requests) to the
controllers and receiving responses. It can take up to
500 microseconds for a transaction to be completed, therefore
it is important to provide a non-blocking interface to it.

This patch adds an abstraction of this infrastructure. Bridge
drivers can register themselves with the framework. Then,
a driver of a device can request an abstract "function" - the
request will be redirected to a bridge referred by thedd
"arm,vexpress,config-bridge" property of the device tree node.
Signed-off-by: NPawel Moll <pawel.moll@arm.com>

smsc ece1099 is a keyboard scan or gpio expansion device.
The patch create keypad and gpio expander child for this
multi function smsc driver.

Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NSourav Poddar <sourav.poddar@ti.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

This is the DA9055 MFD core driver that instantiate all the dependent
component drivers and provides them the device access via I2C.

This patch is functionally tested on Samsung SMDK6410.
Signed-off-by: NDavid Dajun Chen <dchen@diasemi.com>
Signed-off-by: NAshish Jangam <ashish.jangam@kpitcummins.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

TI LP8788 PMU provides regulators, battery charger, ADC,
RTC, backlight driver and current sinks.

This MFD patch supports the I2C communication using the regmap,
the interrupt handling using the linear IRQ domain and
configurable platform data structures for each driver module.

 (Driver Architecture)

                                         < mfd devices >
  LP8788 HW  ..........  mfd  .......... regulator drivers
                I2C                      power supply driver
                IRQs                     iio adc driver
                                         rtc driver
                                         backlight driver
                                         current sink drivers

  o regulators    : LDOs and BUCKs
  o power supply  : Battery charger
  o iio adc       : Battery voltage/temperature
  o rtc           : RTC and alarm
  o backlight
  o current sink  : LED and vibrator

All MFD device modules are registered by LP8788 MFD core driver.
For sharing information such like the virtual IRQ number,
MFD core driver uses the resource structure.
Then each module can retrieve the specific IRQ number and detect it
in the IRQ thread.

Configurable platform data is handled in each driver module.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

The platform driver for the TLL component of the OMAP USB host controller
is implemented. Depending on the TLL hardware revision , the TLL channels
are configured. The USB HS core driver uses this driver through exported
APIs from the TLL platform driver.
usb_tll_enable and usb_tll_disble are the exported APIs of the USB TLL
platform driver.
Signed-off-by: NKeshava Munegowda <keshava_mgowda@ti.com>
Reviewed-by: NPartha Basak <parthab@india.ti.com>
Acked-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>