Patch from Deepak Saxena

aaec2000 map_desc.pfn conversion
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

There is nothing special about having the init code separate from
the common code, so combine the two.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The common oprofile code assumes the name "PMU" (from Intel's
performance management unit).  This is misleading when we
start adding oprofile support for other machine types which
don't use the same terminology.  Call it op_arm_* instead of
pmu_*.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The oprofile suspend/resume was missing locking.  If we failed
to start oprofile on resume, we still reported that it was
enabled.  Instead, disable oprofile on error.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Make ARM independent of the way bootmem operates internally.  We
now map each node as we initialise it, and place the bootmem bitmap
inside each node, rather than all in the first node.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Fix sparse warnings in arch/arm/kernel/module.c,
arch/arm/mm/consistent.c, drivers/pcmcia/sa1111_generic.c,
and platform support files.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

EBSA110 only requires hardware.h to be included for a couple of
files.  Move the include there.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Including asm/hardware.h into asm/io.h can cause #define clashes
between platform specific definitions and driver local definitions.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

"Better late than never"

Don't try to access not-present CPUs.  Conservative governor will always
oops on SMP without this fix.

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=4781Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Commit id 6142891a

Andi Kleen reports that it seems to break things for some people,
and since it's purely a small optimization, revert it for now.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This bug is responsible for causing the infamous "Treason uncloaked"
messages that's been popping up everywhere since the printk was added.
It has usually been blamed on foreign operating systems.  However,
some of those reports implicate Linux as both systems are running
Linux or the TCP connection is going across the loopback interface.

In fact, there really is a bug in the Linux TCP header prediction code
that's been there since at least 2.1.8.  This bug was tracked down with
help from Dale Blount.

The effect of this bug ranges from harmless "Treason uncloaked"
messages to hung/aborted TCP connections.  The details of the bug
and fix is as follows.

When snd_wnd is updated, we only update pred_flags if
tcp_fast_path_check succeeds.  When it fails (for example,
when our rcvbuf is used up), we will leave pred_flags with
an out-of-date snd_wnd value.

When the out-of-date pred_flags happens to match the next incoming
packet we will again hit the fast path and use the current snd_wnd
which will be wrong.

In the case of the treason messages, it just happens that the snd_wnd
cached in pred_flags is zero while tp->snd_wnd is non-zero.  Therefore
when a zero-window packet comes in we incorrectly conclude that the
window is non-zero.

In fact if the peer continues to send us zero-window pure ACKs we
will continue making the same mistake.  It's only when the peer
transmits a zero-window packet with data attached that we get a
chance to snap out of it.  This is what triggers the treason
message at the next retransmit timeout.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

This just makes sure that a thread's expiry times can't get reset after
it clears them in do_exit.

This is what allowed us to re-introduce the stricter BUG_ON() check in
a362f463.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This reverts commit 3de463c7.

Roland has another patch that allows us to leave the BUG_ON() in place
by just making sure that the condition it tests for really is always
true.

That goes in next.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There's a silly off-by-one error in the code that updates the expiration
of posix CPU timers, causing them to not be properly updated when they
hit exactly on their expiration time (which should be the normal case).

This causes them to then fire immediately again, and only _then_ get
properly updated.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Pointed out by Oleg Nesterov, who has been walking over the code
forwards and backwards.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I've seen similar failure on alpha.

Obviously, someone forgot to convert sg->handle stuff for
PCI gart case.
Signed-off-by: NDave Airlie <airlied@linux.ie>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Convert nanoseconds to microseconds correctly.

Spotted by Steve Dickson <SteveD@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

fsck_hfs reveals lots of temporary files accumulating in the hidden
directory "\000\000\000HFS+ Private Data".  According to the HFS+
documentation these are files which are unlinked while in use.  However,
there may be a bug in the Linux hfsplus implementation which causes this to
happen even when the files are not in use.  It looks like the "opencnt"
field is never initialized as (I think) it should be in hfsplus_read_inode.
 This means that a file can appear to be still in use when in fact it has
been closed.  This patch seems to fix it for me.
Signed-off-by: NAnton Altaparmakov <aia21@cantab.net>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Although this message is having the intended effect of causing wireless
driver maintainers to upgrade their code, I never should have merged this
patch in its present form.  Leading to tons of bug reports and unhappy
users.

Some wireless apps poll for statistics regularly, which leads to a printk()
every single time they ask for stats.  That's a little bit _too_ much of a
reminder that the driver is using an old API.

Change this to printing out the message once, per kernel boot.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With CONFIG_SMP=n:

*** Warning: "cpu_online_map" [drivers/firmware/dcdbas.ko] undefined!

due to set_cpus_allowed().
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The mpic interrupt controller driver (used on G5 and early pSeries among
others) has a bug where it doesn't get the right virtual address for the
timer registers.  It causes the driver to poke at the MMIO space of
whatever has been mapped just next to it (ouch !) when initializing and
causes boot failures on some IBM machines.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The NUMA counters in struct per_cpu_pageset (linux/mmzone.h) are never
cleared today.  This works ok for CPU 0 on NUMA machines because
boot_pageset[] is already zero, but for other CPU:s this results in
uninitialized counters.
Signed-off-by: NMagnus Damm <magnus@valinux.co.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There are still a couple of cases where md threads (the resync/recovery
thread) is not interruptible since the change to use kthreads.  All places
there it tests "signal_pending", it should also test kthread_should_stop,
as with this patch.
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Patch from Ian Campbell

Sparse complains about the definition of generic_fls in asm-arm/bitops.h:
  CHECK   /home/icampbell/devel/kernel/2.6/arch/arm/mach-pxa/viper.c
include2/asm/bitops.h:350:34: error: marked inline, but without a definition

The definition is unnecessary since linux/bitops.h defines generic_fls before including asm/bitops.h and asm/bitops.h should not be included directly. There are still some places where asm/bitops.h is directly included, but I think that code should be fixed. I was a little wary of the patch for this reason but lubbock, mainstone and assabet all build OK and so do my in house boards...

ARM is the only arch with the generic_fls prototype in this way.
Signed-off-by: NIan Campbell <icampbell@arcom.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

When reserving an PCI quirk, note that in the kernel bootup messages.

Also, parse the strange PIIX4 device resources - they should get their
own PCI resource quirks, but for now just print out what it finds to
verify that the code does the right thing.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NJochen Friedrich <jochen@scram.de>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

Signed-off-by: NJochen Friedrich <jochen@scram.de>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

Signed-off-by: NYan Zheng <yanzheng@21cn.com>
Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

If qla2x00_probe_one()'s call to qla2x00_iospace_config() fails, we call
qla2x00_free_device() to clean up.  But because ha->dpc_pid hasn't been set
yet, qla2x00_free_device() tries to stop a kernel thread which hasn't started
yet.  It does wait_for_completion() against an uninitialised completion struct
and the kernel hangs up.

Fix it by initialising ha->dpc_pid a bit earlier.

Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

My alpha build is exploding because asm/atomic.h now needs smb_mb(), which is
over in the (not included) system.h.

I fear what will happen if I include system.h into atomic.h, so let's put the
barriers into their own header file.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This fixes compile problem when CONFIG_FB_PXA is not set.

  LD      .tmp_vmlinux1
arch/arm/mach-pxa/built-in.o(.text+0x1d74): In function
`spitz_get_hsync_len':
: undefined reference to `pxafb_get_hsync_time'
make: *** [.tmp_vmlinux1] Error 1
3.46user 0.46system 5.10 (0m5.106s) elapsed 77.01%CPU
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add the new ID 0x132a and configure the new PCI Diva console port.  This
device supports only 1 single console UART.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Tested by Wolfgang Denk with this device:

    00:0f.0 Network controller: PLX Technology, Inc. PCI <-> IOBus Bridge (rev 01)
        Subsystem: Exsys EX-4055 4S(16C550) RS-232
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at 80100000 (32-bit, non-prefetchable) [size=128]
        Region 1: I/O ports at 7080 [size=128]
        Region 2: I/O ports at 7400 [size=32]

    00:0f.0 Class 0280: 10b5:9050 (rev 01)
        Subsystem: d84d:4055

Results with this patch:

    Serial: 8250/16550 driver $Revision: 1.90 $ 32 ports, IRQ sharing enabled
    ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    PCI: Found IRQ 10 for device 0000:00:0f.0
    ttyS4 at I/O 0x7400 (irq = 10) is a 16550A
    ttyS5 at I/O 0x7408 (irq = 10) is a 16550A
    ttyS6 at I/O 0x7410 (irq = 10) is a 16550A
    ttyS7 at I/O 0x7418 (irq = 10) is a 16550A
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>