This avoids an accidental stack VLA (since the compiler thinks the value
of "len" can change, even when marked "const").  This just replaces it
with a #define so it will DTRT.

Seen with -Wvla.  Fixed as part of the directive to remove all VLAs from
the kernel: https://lkml.org/lkml/2018/3/7/621

Link: http://lkml.kernel.org/r/20180307212555.GA17927@beastSigned-off-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Yury Norov <ynorov@caviumnetworks.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Keep all of the SOFTLOCKUP kconfig symbols together (instead of
injecting the HARDLOCKUP symbols in the midst of them) so that the
config tools display them with their dependencies.

Tested with 'make {menuconfig/nconfig/gconfig/xconfig}'.

Link: http://lkml.kernel.org/r/6be2d9ed-4656-5b94-460d-7f051e2c7570@infradead.org
Fixes: 05a4a952 ("kernel/watchdog: split up config options")
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Link: http://lkml.kernel.org/r/1522958149-6157-1-git-send-email-alex.bou9@gmail.comSigned-off-by: NAlexandre Bounine <alex.bou9@gmail.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Barry Wood <barry.wood@idt.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The original intent for always adding the anonymous struct in
task_struct was to make sure we had compiler coverage.

However, this caused pathological padding of 40 bytes at the start of
task_struct.  Instead, move the anonymous struct to being only used when
struct layout randomization is enabled.

Link: http://lkml.kernel.org/r/20180327213609.GA2964@beast
Fixes: 29e48ce8 ("task_struct: Allow randomized")
Signed-off-by: NKees Cook <keescook@chromium.org>
Reported-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

clang-format is a tool to format C/C++/...  code according to a set of
rules and heuristics.  Like most tools, it is not perfect nor covers
every single case, but it is good enough to be helpful.

In particular, it is useful for quickly re-formatting blocks of code
automatically, for reviewing full files in order to spot coding style
mistakes, typos and possible improvements.  It is also handy for sorting
``#includes``, for aligning variables and macros, for reflowing text and
other similar tasks.  It also serves as a teaching tool/guide for
newcomers.

The tool itself has been already included in the repositories of popular
Linux distributions for a long time.  The rules in this file are
intended for clang-format >= 4, which is easily available in most
distributions.

This commit adds the configuration file that contains the rules that the
tool uses to know how to format the code according to the kernel coding
style.  This gives us several advantages:

  * clang-format works out of the box with reasonable defaults;
    avoiding that everyone has to re-do the configuration.

  * Everyone agrees (eventually) on what is the most useful default
    configuration for most of the kernel.

  * If it becomes commonplace among kernel developers, clang-format
    may feel compelled to support us better. They already recognize
    the Linux kernel and its style in their documentation and in one
    of the style sub-options.

Some of clang-format's features relevant for the kernel are:

  * Uses clang's tooling support behind the scenes to parse and rewrite
    the code. It is not based on ad-hoc regexps.

  * Supports reasonably well the Linux kernel coding style.

  * Fast enough to be used at the press of a key.

  * There are already integrations (either built-in or third-party)
    for many common editors used by kernel developers (e.g. vim,
    emacs, Sublime, Atom...) that allow you to format an entire file
    or, more usefully, just your selection.

  * Able to parse unified diffs -- you can, for instance, reformat
    only the lines changed by a git commit.

  * Able to reflow text comments as well.

  * Widely supported and used by hundreds of developers in highly
    complex projects and organizations (e.g. the LLVM project itself,
    Chromium, WebKit, Google, Mozilla...). Therefore, it will be
    supported for a long time.

See more information about the tool at:

    https://clang.llvm.org/docs/ClangFormat.html
    https://clang.llvm.org/docs/ClangFormatStyleOptions.html

Link: http://lkml.kernel.org/r/20180318171632.qfkemw3mwbcukth6@gmail.comSigned-off-by: NMiguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

So "struct uts_namespace" can enjoy fine-grained SLAB debugging and
usercopy protection.

I'd prefer shorter name "utsns" but there is "user_namespace" already.

Link: http://lkml.kernel.org/r/20180228215158.GA23146@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Serge Hallyn <serge@hallyn.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since the randstruct plugin can intentionally produce extremely unusual
kernel structure layouts (even performance pathological ones), some
maintainers want to be able to trivially determine if an Oops is coming
from a randstruct-built kernel, so as to keep their sanity when
debugging.  This adds the new flag and initializes taint_mask
immediately when built with randstruct.

Link: http://lkml.kernel.org/r/1519084390-43867-4-git-send-email-keescook@chromium.orgSigned-off-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This consolidates the taint bit documentation into a single place with
both numeric and letter values.  Additionally adds the missing TAINT_AUX
documentation.

Link: http://lkml.kernel.org/r/1519084390-43867-3-git-send-email-keescook@chromium.orgSigned-off-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This converts to using indexed initializers instead of comments, adds a
comment on why the taint flags can't be an enum, and make sure that no
one forgets to update the taint_flags when adding new bits.

Link: http://lkml.kernel.org/r/1519084390-43867-2-git-send-email-keescook@chromium.orgSigned-off-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The only tests I could come up with for /proc/uptime are:
 - test that values increase monotonically for 1 second,
 - bounce around CPUs and test the same thing.

Avoid glibc like plague for affinity given patches like this:
https://marc.info/?l=linux-kernel&m=152130031912594&w=4

Link: http://lkml.kernel.org/r/20180317165235.GB3445@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In a typical for /proc "open+read+close" usecase, dentry is looked up
successfully on open only to be killed in dput() on close.  In fact
dentries which aren't /proc/*/...  and /proc/sys/* were almost NEVER
CACHED.  Simple printk in proc_lookup_de() shows that.

Now that ->delete hook intelligently picks which dentries should live in
dcache and which should not, rbtree caching is not necessary as dcache
does it job, at last!

As a side effect, struct proc_dir_entry shrinks by one pointer which can
go into inline name.

Link: http://lkml.kernel.org/r/20180314231032.GA15854@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Acked-by: NDavidlohr Bueso <dbueso@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Perform reads with nearly everything in /proc, and some writing as well.

Hopefully memleak checkers and KASAN will find something.

[adobriyan@gmail.com: /proc/kmsg can and will block if read under root]
  Link: http://lkml.kernel.org/r/20180316232147.GA20146@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
[adobriyan@gmail.com: /proc/sysrq-trigger lives on the ground floor]
  Link: http://lkml.kernel.org/r/20180317164911.GA3445@avx2
Link: http://lkml.kernel.org/r/20180315201251.GA12396@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

->count is honest reference count unlike ->in_use.

Link: http://lkml.kernel.org/r/20180313174550.GA4332@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Various subsystems can create files and directories in /proc with names
directly controlled by userspace.

Which means "/", "." and ".." are no-no.

"/" split is already taken care of, do the other 2 prohibited names.

Link: http://lkml.kernel.org/r/20180310001223.GB12443@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Acked-by: NFlorian Westphal <fw@strlen.de>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Test fork counter formerly known as ->last_pid, the only part of
/proc/loadavg which can be tested.

Testing in init pid namespace is not reliable because of background
activity.

Link: http://lkml.kernel.org/r/20180311152241.GA26247@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mm_struct is not needed while printing as all the data was already
extracted.

Link: http://lkml.kernel.org/r/20180309223120.GC3843@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use seq_puts() and skip format string processing.

Link: http://lkml.kernel.org/r/20180309222948.GB3843@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As soon as register_filesystem() exits, filesystem can be mounted.  It
is better to present fully operational /proc.

Of course it doesn't matter because /proc is not modular but do it
anyway.

Drop error check, it should be handled by panicking.

Link: http://lkml.kernel.org/r/20180309222709.GA3843@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I totally forgot that _parse_integer() accepts arbitrary amount of
leading zeroes leading to the following lookups:

		OK
	# readlink /proc/1/map_files/56427ecba000-56427eddc000
	/lib/systemd/systemd

		bogus
	# readlink /proc/1/map_files/00000000000056427ecba000-56427eddc000
	/lib/systemd/systemd
	# readlink /proc/1/map_files/56427ecba000-00000000000056427eddc000
	/lib/systemd/systemd

Link: http://lkml.kernel.org/r/20180303215130.GA23480@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: NCyrill Gorcunov <gorcunov@gmail.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

"struct proc_dir_entry" is variable sized because of 0-length trailing
array for name, however, because of SLAB padding allocations it is
possible to make "struct proc_dir_entry" fixed sized and allocate same
amount of memory.

It buys fine-grained debugging with poisoning and usercopy protection
which is not possible with kmalloc-* caches.

Currently, on 32-bit 91+ byte allocations go into kmalloc-128 and on
64-bit 147+ byte allocations go to kmalloc-192 anyway.

Additional memory is allocated only for 38/46+ byte long names which are
rare or may not even exist in the wild.

Link: http://lkml.kernel.org/r/20180223205504.GA17139@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Read from /proc/self/syscall should yield read system call and correct
args in the output as current is reading /proc/self/syscall.

Link: http://lkml.kernel.org/r/20180226212145.GB742@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch starts testing /proc.  Many more tests to come (I promise).

Read from /proc/self/wchan should always return "0" as current is in
TASK_RUNNING state while reading /proc/self/wchan.

Link: http://lkml.kernel.org/r/20180226212006.GA742@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

proc_sys_link_fill_cache() does not need to check whether we're called
for a link - it's already done by scan().

Link: http://lkml.kernel.org/r/20180228013506.4915-2-danilokrummrich@dk-develop.deSigned-off-by: NDanilo Krummrich <danilokrummrich@dk-develop.de>
Acked-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Luis R . Rodriguez" <mcgrof@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

proc_sys_link_fill_cache() does not take currently unregistering sysctl
tables into account, which might result into a page fault in
sysctl_follow_link() - add a check to fix it.

This bug has been present since v3.4.

Link: http://lkml.kernel.org/r/20180228013506.4915-1-danilokrummrich@dk-develop.de
Fixes: 0e47c99d ("sysctl: Replace root_list with links between sysctl_table_sets")
Signed-off-by: NDanilo Krummrich <danilokrummrich@dk-develop.de>
Acked-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: "Luis R . Rodriguez" <mcgrof@kernel.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Link: http://lkml.kernel.org/r/20180217072011.GB16074@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

get_wchan() accesses stack page before permissions are checked, let's
not play this game.

Link: http://lkml.kernel.org/r/20180217071923.GA16074@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

seq_printf() works slower than seq_puts, seq_puts, etc.

== test_proc.c
int main(int argc, char **argv)
{
	int n, i, fd;
	char buf[16384];

	n = atoi(argv[1]);
	for (i = 0; i < n; i++) {
		fd = open(argv[2], O_RDONLY);
		if (fd < 0)
			return 1;
		if (read(fd, buf, sizeof(buf)) <= 0)
			return 1;
		close(fd);
	}

	return 0;
}
==

$ time ./test_proc  1000000 /proc/1/status

== Before path ==
real	0m5.171s
user	0m0.328s
sys	0m4.783s

== After patch ==
real	0m4.761s
user	0m0.334s
sys	0m4.366s

Link: http://lkml.kernel.org/r/20180212074931.7227-4-avagin@openvz.orgSigned-off-by: NAndrei Vagin <avagin@openvz.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A delimiter is a string which is printed before a number.  A
syngle-symbol delimiters can be printed by set_putc() and this works
faster than printing by set_puts().

== test_proc.c

int main(int argc, char **argv)
{
	int n, i, fd;
	char buf[16384];

	n = atoi(argv[1]);
	for (i = 0; i < n; i++) {
		fd = open(argv[2], O_RDONLY);
		if (fd < 0)
			return 1;
		if (read(fd, buf, sizeof(buf)) <= 0)
			return 1;
		close(fd);
	}

	return 0;
}
==

$ time ./test_proc  1000000 /proc/1/stat

== Before patch ==
  real	0m3.820s
  user	0m0.337s
  sys	0m3.394s

== After patch ==
  real	0m3.110s
  user	0m0.324s
  sys	0m2.700s

Link: http://lkml.kernel.org/r/20180212074931.7227-3-avagin@openvz.orgSigned-off-by: NAndrei Vagin <avagin@openvz.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

seq_putc() works much faster than seq_printf()

== Before patch ==
  $ time python test_smaps.py
  real    0m3.828s
  user    0m0.413s
  sys     0m3.408s

== After patch ==
  $ time python test_smaps.py
  real	0m3.405s
  user	0m0.401s
  sys	0m3.003s

== Before patch ==
-   75.51%     4.62%  python   [kernel.kallsyms]    [k] show_smap.isra.33
   - 70.88% show_smap.isra.33
      + 24.82% seq_put_decimal_ull_aligned
      + 19.78% __walk_page_range
      + 12.74% seq_printf
      + 11.08% show_map_vma.isra.23
      + 1.68% seq_puts

== After patch ==
-   69.16%     5.70%  python   [kernel.kallsyms]    [k] show_smap.isra.33
   - 63.46% show_smap.isra.33
      + 25.98% seq_put_decimal_ull_aligned
      + 20.90% __walk_page_range
      + 12.60% show_map_vma.isra.23
        1.56% seq_putc
      + 1.55% seq_puts

Link: http://lkml.kernel.org/r/20180212074931.7227-2-avagin@openvz.orgSigned-off-by: NAndrei Vagin <avagin@openvz.org>
Reviewed-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

seq_put_decimal_ull_w(m, str, val, width) prints a decimal number with a
specified minimal field width.

It is equivalent of seq_printf(m, "%s%*d", str, width, val), but it
works much faster.

== test_smaps.py
  num = 0
  with open("/proc/1/smaps") as f:
          for x in xrange(10000):
                  data = f.read()
                  f.seek(0, 0)
==

== Before patch ==
  $ time python test_smaps.py
  real    0m4.593s
  user    0m0.398s
  sys     0m4.158s

== After patch ==
  $ time python test_smaps.py
  real    0m3.828s
  user    0m0.413s
  sys     0m3.408s

$ perf -g record python test_smaps.py
== Before patch ==
-   79.01%     3.36%  python   [kernel.kallsyms]    [k] show_smap.isra.33
   - 75.65% show_smap.isra.33
      + 48.85% seq_printf
      + 15.75% __walk_page_range
      + 9.70% show_map_vma.isra.23
        0.61% seq_puts

== After patch ==
-   75.51%     4.62%  python   [kernel.kallsyms]    [k] show_smap.isra.33
   - 70.88% show_smap.isra.33
      + 24.82% seq_put_decimal_ull_w
      + 19.78% __walk_page_range
      + 12.74% seq_printf
      + 11.08% show_map_vma.isra.23
      + 1.68% seq_puts

[akpm@linux-foundation.org: fix drivers/of/unittest.c build]
Link: http://lkml.kernel.org/r/20180212074931.7227-1-avagin@openvz.orgSigned-off-by: NAndrei Vagin <avagin@openvz.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The allocation is persistent in fact as any fool can open a file in
/proc and sit on it.

Link: http://lkml.kernel.org/r/20180214082409.GC17157@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

"struct pde_opener" is fixed size and we can have more granular approach
to debugging.

For those who don't know, per cache SLUB poisoning and red zoning don't
work if there is at least one object allocated which is hopeless in case
of kmalloc-64 but not in case of standalone cache.  Although systemd
opens 2 files from the get go, so it is hopeless after all.

Link: http://lkml.kernel.org/r/20180214082306.GB17157@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The more the merrier.

Link: http://lkml.kernel.org/r/20180214081935.GA17157@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The whole point of code in fs/proc/inode.c is to make sure ->release
hook is called either at close() or at rmmod time.

All if it is unnecessary if there is no ->release hook.

Save allocation+list manipulations under spinlock in that case.

Link: http://lkml.kernel.org/r/20180214063033.GA15579@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move the proc_mkdir() call within the sysvipc subsystem such that we
avoid polluting proc_root_init() with petty cpp.

[dave@stgolabs.net: contributed changelog]
Link: http://lkml.kernel.org/r/20180216161732.GA10297@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NDavidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit ca469f35 ("deal with races between remove_proc_entry() and
proc_reg_release()") moved too much stuff under ->pde_unload_lock making
a problem described at series "[PATCH v5] procfs: Improve Scaling in
proc" worse.

While RCU is being figured out, move kfree() out of ->pde_unload_lock.

On my potato, difference is only 0.5% speedup with concurrent
open+read+close of /proc/cmdline, but the effect should be more
noticeable on more capable machines.

$ perf stat -r 16 -- ./proc-j 16

 Performance counter stats for './proc-j 16' (16 runs):

     130569.502377      task-clock (msec)         #   15.872 CPUs utilized            ( +-  0.05% )
            19,169      context-switches          #    0.147 K/sec                    ( +-  0.18% )
                15      cpu-migrations            #    0.000 K/sec                    ( +-  3.27% )
               437      page-faults               #    0.003 K/sec                    ( +-  1.25% )
   300,172,097,675      cycles                    #    2.299 GHz                      ( +-  0.05% )
    96,793,267,308      instructions              #    0.32  insn per cycle           ( +-  0.04% )
    22,798,342,298      branches                  #  174.607 M/sec                    ( +-  0.04% )
       111,764,687      branch-misses             #    0.49% of all branches          ( +-  0.47% )

       8.226574400 seconds time elapsed                                          ( +-  0.05% )
       ^^^^^^^^^^^

$ perf stat -r 16 -- ./proc-j 16

 Performance counter stats for './proc-j 16' (16 runs):

     129866.777392      task-clock (msec)         #   15.869 CPUs utilized            ( +-  0.04% )
            19,154      context-switches          #    0.147 K/sec                    ( +-  0.66% )
                14      cpu-migrations            #    0.000 K/sec                    ( +-  1.73% )
               431      page-faults               #    0.003 K/sec                    ( +-  1.09% )
   298,556,520,546      cycles                    #    2.299 GHz                      ( +-  0.04% )
    96,525,366,833      instructions              #    0.32  insn per cycle           ( +-  0.04% )
    22,730,194,043      branches                  #  175.027 M/sec                    ( +-  0.04% )
       111,506,074      branch-misses             #    0.49% of all branches          ( +-  0.18% )

       8.183629778 seconds time elapsed                                          ( +-  0.04% )
       ^^^^^^^^^^^

Link: http://lkml.kernel.org/r/20180213132911.GA24298@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

get_task_umask locks/unlocks the task on its own.  The only caller does
the same thing immediately after.

Utilize the fact the task has to be locked anyway and just do it once.
Since there are no other users and the code is short, fold it in.

Link: http://lkml.kernel.org/r/1517995608-23683-1-git-send-email-mguzik@redhat.comSigned-off-by: NMateusz Guzik <mguzik@redhat.com>
Reviewed-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

seq_printf() is slow and it can be replaced by memset() in this case.

== test.py
  num = 0
  with open("/proc/1/maps") as f:
          while num < 10000 :
                  data = f.read()
                  f.seek(0, 0)
                  num = num + 1
==

== Before patch ==
  $  time python test.py
  real	0m0.986s
  user	0m0.279s
  sys	0m0.707s

== After patch ==
  $ time python test.py
  real	0m0.932s
  user	0m0.261s
  sys	0m0.669s

$ perf record -g python test.py
== Before patch ==
-   47.35%     3.38%  python   [kernel.kallsyms] [k] show_map_vma.isra.23
   - 43.97% show_map_vma.isra.23
      + 20.84% seq_path
      - 15.73% show_vma_header_prefix
      + 6.96% seq_pad
   + 2.94% __GI___libc_read

== After patch ==
-   44.01%     0.34%  python   [kernel.kallsyms] [k] show_pid_map
   - 43.67% show_pid_map
      - 42.91% show_map_vma.isra.23
         + 21.55% seq_path
         - 15.68% show_vma_header_prefix
         + 2.08% seq_pad
        0.55% seq_putc

Link: http://lkml.kernel.org/r/20180112185812.7710-2-avagin@openvz.orgSigned-off-by: NAndrei Vagin <avagin@openvz.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

seq_put_hex_ll() prints a number in hexadecimal notation and works
faster than seq_printf().

== test.py
  num = 0
  with open("/proc/1/maps") as f:
          while num < 10000 :
                  data = f.read()
                  f.seek(0, 0)
                 num = num + 1
==

== Before patch ==
  $  time python test.py

  real	0m1.561s
  user	0m0.257s
  sys	0m1.302s

== After patch ==
  $ time python test.py

  real	0m0.986s
  user	0m0.279s
  sys	0m0.707s

$ perf -g record python test.py:

== Before patch ==
-   67.42%     2.82%  python   [kernel.kallsyms] [k] show_map_vma.isra.22
   - 64.60% show_map_vma.isra.22
      - 44.98% seq_printf
         - seq_vprintf
            - vsnprintf
               + 14.85% number
               + 12.22% format_decode
                 5.56% memcpy_erms
      + 15.06% seq_path
      + 4.42% seq_pad
   + 2.45% __GI___libc_read

== After patch ==
-   47.35%     3.38%  python   [kernel.kallsyms] [k] show_map_vma.isra.23
   - 43.97% show_map_vma.isra.23
      + 20.84% seq_path
      - 15.73% show_vma_header_prefix
           10.55% seq_put_hex_ll
         + 2.65% seq_put_decimal_ull
           0.95% seq_putc
      + 6.96% seq_pad
   + 2.94% __GI___libc_read

[avagin@openvz.org: use unsigned int instead of int where it is suitable]
  Link: http://lkml.kernel.org/r/20180214025619.4005-1-avagin@openvz.org
[avagin@openvz.org: v2]
  Link: http://lkml.kernel.org/r/20180117082050.25406-1-avagin@openvz.org
Link: http://lkml.kernel.org/r/20180112185812.7710-1-avagin@openvz.orgSigned-off-by: NAndrei Vagin <avagin@openvz.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A compiler can optimize away memset calls by replacing them with mov
instructions.  There are KASAN tests that specifically test that KASAN
correctly handles memset calls so we don't want this optimization to
happen.

The solution is to add -fno-builtin flag to test_kasan.ko

Link: http://lkml.kernel.org/r/105ec9a308b2abedb1a0d1fdced0c22d765e4732.1519924383.git.andreyknvl@google.comSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Chris Mason <clm@fb.com>
Cc: Yury Norov <ynorov@caviumnetworks.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Luis R . Rodriguez" <mcgrof@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Cc: Kostya Serebryany <kcc@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>