Add scomp backend for deflate compression algorithm.
Signed-off-by: NGiovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add scomp backend for 842 compression algorithm.
Signed-off-by: NGiovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add scomp backend for lz4hc compression algorithm.
Signed-off-by: NGiovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add scomp backend for lz4 compression algorithm.
Signed-off-by: NGiovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add scomp backend for lzo compression algorithm.
Signed-off-by: NGiovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add a synchronous back-end (scomp) to acomp. This allows to easily
expose the already present compression algorithms in LKCF via acomp.
Signed-off-by: NGiovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add acomp, an asynchronous compression api that uses scatterlist
buffers.
Signed-off-by: NGiovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The abbreviation for Cryptographic Coprocessor is "CCP".
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Acked-by: NGary R Hook <gary.hook@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The Amlogic Meson is a DT-only platform, which means the devices are
registered via OF and not using the legacy platform devices support.

So there's no need to have a MODULE_ALIAS("platform:meson-rng") since
the reported uevent MODALIAS to user-space will always be the OF one.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Acked-by: NKevin Hilman <khilman@baylibre.com>
Acked-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use the new API to create and destroy the crypto engine kthread
worker. The API hides some implementation details.

In particular, kthread_create_worker() allocates and initializes
struct kthread_worker. It runs the kthread the right way
and stores task_struct into the worker structure.

kthread_destroy_worker() flushes all pending works, stops
the kthread and frees the structure.

This patch does not change the existing behavior except for
dynamically allocating struct kthread_worker and storing
only the pointer of this structure.

It is compile tested only because I did not find an easy
way how to run the code. Well, it should be pretty safe
given the nature of the change.
Signed-off-by: NPetr Mladek <pmladek@suse.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Fix a few problems revealed by testing: verify consistent
units, especially in public slot allocation. Percolate
some common initialization code up to a common routine.
Add some comments.
Signed-off-by: NGary R Hook <gary.hook@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Clean up patch for an unneeded structure member.
Signed-off-by: NGary R Hook <gary.hook@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Bit fields are not sensitive to endianness, so use
a transparent standard data type
Signed-off-by: NGary R Hook <gary.hook@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

If the driver is built as a module, autoload won't work because the module
alias information is not filled. So user-space can't match the registered
device with the corresponding module.

Export the module alias information using the MODULE_DEVICE_TABLE() macro.

Before this patch:

$ modinfo drivers/char/hw_random/meson-rng.ko | grep alias
alias:          platform:meson-rng

After this patch:

$ modinfo drivers/char/hw_random/meson-rng.ko | grep alias
alias:          platform:meson-rng
alias:          of:N*T*Camlogic,meson-rngC*
alias:          of:N*T*Camlogic,meson-rng
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Acked-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Fix to return error code -EINVAL from the invalid alg ivsize error
handling case instead of 0, as done elsewhere in this function.
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Fixes the following sparse warning:

drivers/crypto/ccp/ccp-dev.c:44:6: warning:
 symbol 'ccp_error_codes' was not declared. Should it be static?
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Acked-by: NGary R Hook <gary.hook@amd.com>
Acked-by: NGary R Hook <gary.hook@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

i.MX6UL does only require three clocks to enable CAAM module.
Signed-off-by: NMarcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: NRob Herring <robh@kernel.org>
Reviewed-by: NHoria Geantă <horia.geanta@nxp.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove the unused but set variable pinst in padata_parallel_worker to
fix the following warning when building with 'W=1':

  kernel/padata.c: In function ‘padata_parallel_worker’:
  kernel/padata.c:68:26: warning: variable ‘pinst’ set but not used [-Wunused-but-set-variable]

Also remove the now unused variable pd which is only used to set pinst.
Signed-off-by: NTobias Klauser <tklauser@distanz.ch>
Acked-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The lsb field uses a value of -1 to indicate that it
is unassigned. Therefore type must be a signed int.
Signed-off-by: NGary R Hook <gary.hook@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The AES key schedule generation is mostly endian agnostic, with the
exception of the rotation and the incorporation of the round constant
at the start of each round. So implement a big endian specific version
of that part to make the whole routine big endian compatible.

Fixes: 86464859 ("crypto: arm - AES in ECB/CBC/CTR/XTS modes using ARMv8 Crypto Extensions")
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Emit the XTS tweak literal constants in the appropriate order for a
single 128-bit scalar literal load.

Fixes: 49788fe2 ("arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions")
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The AES implementation using pure NEON instructions relies on the generic
AES key schedule generation routines, which store the round keys as arrays
of 32-bit quantities stored in memory using native endianness. This means
we should refer to these round keys using 4x4 loads rather than 16x1 loads.
In addition, the ShiftRows tables are loading using a single scalar load,
which is also affected by endianness, so emit these tables in the correct
order depending on whether we are building for big endian or not.

Fixes: 49788fe2 ("arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions")
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The AES-CCM implementation that uses ARMv8 Crypto Extensions instructions
refers to the AES round keys as pairs of 64-bit quantities, which causes
failures when building the code for big endian. In addition, it byte swaps
the input counter unconditionally, while this is only required for little
endian builds. So fix both issues.

Fixes: 12ac3efe ("arm64/crypto: use crypto instructions to generate AES key schedule")
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The SHA256 digest is an array of 8 32-bit quantities, so we should refer
to them as such in order for this code to work correctly when built for
big endian. So replace 16 byte scalar loads and stores with 4x32 vector
ones where appropriate.

Fixes: 6ba6c74d ("arm64/crypto: SHA-224/SHA-256 using ARMv8 Crypto Extensions")
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The SHA1 digest is an array of 5 32-bit quantities, so we should refer
to them as such in order for this code to work correctly when built for
big endian. So replace 16 byte scalar loads and stores with 4x4 vector
ones where appropriate.

Fixes: 2c98833a ("arm64/crypto: SHA-1 using ARMv8 Crypto Extensions")
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The GHASH key and digest are both pairs of 64-bit quantities, but the
GHASH code does not always refer to them as such, causing failures when
built for big endian. So replace the 16x1 loads and stores with 2x8 ones.

Fixes: b913a640 ("arm64/crypto: improve performance of GHASH algorithm")
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The core AES cipher implementation that uses ARMv8 Crypto Extensions
instructions erroneously loads the round keys as 64-bit quantities,
which causes the algorithm to fail when built for big endian. In
addition, the key schedule generation routine fails to take endianness
into account as well, when loading the combining the input key with
the round constants. So fix both issues.

Fixes: 12ac3efe ("arm64/crypto: use crypto instructions to generate AES key schedule")
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The per-transform 'consts' array is accessed as __be64 in
crypto_cmac_digest_setkey() but was only guaranteed to be aligned to
__alignof__(long).  Fix this by aligning it to __alignof__(__be64).
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

cmac_create() previously returned 0 if a cipher with a block size other
than 8 or 16 bytes was specified.  It should return -EINVAL instead.
Granted, this doesn't actually change any behavior because cryptomgr
currently ignores any return value other than -EAGAIN from template
->create() functions.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

crypto_exit_cipher_ops() and crypto_exit_compress_ops() are no-ops and
have been for a long time, so remove them.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The definition of crypto_lookup_skcipher() was already removed in
commit 3a01d0ee ("crypto: skcipher - Remove top-level givcipher
interface").  So the declaration should be removed too.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The size used in 'dma_free_coherent()' looks un-initialized here.
ctx->sa_len is set a few lines below and is apparently not set by the
caller.
So use 'size' as in the corresponding 'dma_alloc_coherent()' a few lines
above.

This has been spotted with coccinelle, using the following script:
////////////////////
@r@
expression x0, x1, y0, y1, z0, z1, t0, t1, ret;
@@

*   ret = dma_alloc_coherent(x0, y0, z0, t0);
    ...
*   dma_free_coherent(x1, y1, ret, t1);

@script:python@
y0 << r.y0;
y1 << r.y1;

@@
if y1.find(y0) == -1:
 print "WARNING: sizes look different:  '%s'   vs   '%s'" % (y0, y1)
////////////////////
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Currently, the driver breaks chain for all kind of hash requests in order to
don't override intermediate states of partial ahash updates. However, some final
ahash requests can be directly processed by the engine, and so without
intermediate state. This is typically the case for most for the HMAC requests
processed via IPSec.

This commits adds a TDMA descriptor to copy context for these of requests
into the "op" dma pool, then it allow to chain these requests at the DMA level.
The 'complete' operation is also updated to retrieve the MAC digest from the
right location.
Signed-off-by: NRomain Perier <romain.perier@free-electrons.com>
Acked-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

So far, we used a dedicated dma pool to copy the result of outer IV for
cipher requests. Instead of using a dma pool per outer data, we prefer
use the op dma pool that contains all part of the request from the SRAM.
Then, the outer data that is likely to be used by the 'complete'
operation, is copied later. In this way, any type of result can be
retrieved by DMA for cipher or ahash requests.
Signed-off-by: NRomain Perier <romain.perier@free-electrons.com>
Acked-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Currently FIPS depends on MODULE_SIG, even if MODULES is disabled.
This change allows the enabling of FIPS without support for modules.

If module loading support is enabled, only then does
FIPS require MODULE_SIG.
Signed-off-by: NAlec Ari <neotheuser@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds the xts(aes) algorithm, which is supported from
hardware version 0x500 and above (sama5d2x).
Signed-off-by: NCyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch fixes a compiler error when VERBOSE_DEBUG is defined. Indeed,
in atmel_aes_write(), the 3rd argument of atmel_aes_reg_name() was
missing.
Signed-off-by: NCyrille Pitchen <cyrille.pitchen@atmel.com>
Reported-by: NLevent Demir <levent.demir@inria.fr>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This commits adds the devicetree description of the SafeXcel IP-76 TRNG
found in the two Armada CP110.
Signed-off-by: NRomain Perier <romain.perier@free-electrons.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This commits adds a device variant for Safexcel,EIP76 found in Marvell
Armada 8k. It defines registers mapping with the good offset and add a
specific initialization function.
Signed-off-by: NRomain Perier <romain.perier@free-electrons.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

So far, this driver was only used for OMAP SoCs. However, if a device
variant is added for an IP block that has nothing to do with the OMAP
platform, the message "OMAP Random Number Generator Ver" is displayed
anyway. Instead of hardcoding "OMAP" into this message, we decide to
only display "Random Number Generator". As dev_info is already
pre-pending the message with the name of the device, we have enough
informations.
Signed-off-by: NRomain Perier <romain.perier@free-electrons.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>