warning: (NETFILTER_XT_TARGET_REDIRECT) selects NF_NAT_REDIRECT_IPV4 which has unmet direct dependencies (NET && INET && NETFILTER && NF_NAT_IPV4)

warning: (NETFILTER_XT_TARGET_REDIRECT) selects NF_NAT_REDIRECT_IPV6 which has unmet direct dependencies (NET && INET && IPV6 && NETFILTER && NF_NAT_IPV6)

Fixes: 8b13eddf ("netfilter: refactor NAT redirect IPv4 to use it from nf_tables")
Fixes: 9de920ed ("netfilter: refactor NAT redirect IPv6 code to use it from nf_tables")
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This allows you to filter traffic by process control group (cgroup).
Signed-off-by: NAna Rey <anarey@gmail.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

net/netfilter/nf_log.c:157:16: warning: incorrect type in assignment (different address spaces)
net/netfilter/nf_log.c:157:16:    expected struct nf_logger *logger
net/netfilter/nf_log.c:157:16:    got struct nf_logger [noderef] <asn:4>*<noident>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Simon Horman says:

====================
The single patch in this series fixes some minor fallout from adding
support IPv6 real servers in IPv4 virtual-services and vice versa.

It should not have any run-time affect other than perhaps saving a few cycles.
====================
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Currently, despite the comment right before the function,
nf_log_register allows registering two loggers on with the same type and
end up overwriting the previous register.

Not a real issue today as current tree doesn't have two loggers for the
same type but it's better to get this protected.

Also make sure that all of its callers do error checking.
Signed-off-by: NMarcelo Ricardo Leitner <mleitner@redhat.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Wrap up a common call pattern in an easier to handle call.
Signed-off-by: NMarcelo Ricardo Leitner <mleitner@redhat.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

It is a precondition of the function that daddr be equal to dest->addr.ip
if dest is non-NULL, so this additional assignment is just confusing for
stupid engineers like me.
Signed-off-by: NAlex Gartrell <agartrell@fb.com>
Signed-off-by: NSimon Horman <horms@verge.net.au>

This new expression provides NAT in the redirect flavour, which is to
redirect packets to local machine.
Signed-off-by: NArturo Borrero Gonzalez <arturo.borrero.glez@gmail.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This patch refactors the IPv6 code so it can be usable both from xt and
nf_tables.
Signed-off-by: NArturo Borrero Gonzalez <arturo.borrero.glez@gmail.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This patch refactors the IPv4 code so it can be usable both from xt and
nf_tables.

A similar patch follows-up to handle IPv6.
Signed-off-by: NArturo Borrero Gonzalez <arturo.borrero.glez@gmail.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Let compiler decide what to do with static void __ipxitf_put()
Suggested-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

use %08X instead of %08lX and remove casting.
Suggested-by: NJoe Perches <joe@perches.com>
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

include ipx.h from sysctl_net_ipx.c
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

unsigned char *sha (source) was already in original git version
 but was never used.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Frank Blaschka says:

====================
s390: network patches for net-next

looks like there was a problem with my previous posting. Hope this time
it will work. Sorry for any inconvenience. The patches are mostly
cleanups and small enhancements for net-next
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since a single integer value is read from the supplied buffer
use the kstrto functions instead of sscanf.
Signed-off-by: NThomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: NFrank Blaschka <blaschka@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since a single integer value is read from the supplied buffer
use the kstrto functions instead of sscanf.
Signed-off-by: NThomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: NFrank Blaschka <blaschka@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Compile the s390 10GB ethernet device driver only when
ETHERNET has been defined in the kernel configuration file.
Right now the qeth device driver is always built regardless
of which network connectivity is active.
Signed-off-by: NThomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: NFrank Blaschka <blaschka@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch makes 4 local functions static and removes
the prototypes from the header file.
Signed-off-by: NThomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: NFrank Blaschka <blaschka@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes trace formatting issues using the
QETH_CARD_TEXT_ macro. The total size of each trace entry
is 8 bytes. Some of the sprintf formats exceed these 8
bytes (for example using abcd:%d and the converted value
needs more than 3 bytes). The solution is to shorten the
text prepending the value or use a different format (%x).
Signed-off-by: NThomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: NFrank Blaschka <blaschka@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch makes some global functions static and removes
the prototypes from the header file.
Also function qeth_query_card_info is not exported anymore,
there is no external user for it, this function should never
have been exported in the first place.
Signed-off-by: NThomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: NFrank Blaschka <blaschka@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A full Rx ring only requires 1 MiB of memory.  This is not enough
memory that it is useful to dynamically scale the number of Rx
requests in the ring based on traffic rates, because:

a) Even the full 1 MiB is a tiny fraction of a typically modern Linux
   VM (for example, the AWS micro instance still has 1 GiB of memory).

b) Netfront would have used up to 1 MiB already even with moderate
   data rates (there was no adjustment of target based on memory
   pressure).

c) Small VMs are going to typically have one VCPU and hence only one
   queue.

Keeping the ring full of Rx requests handles bursty traffic better
than trying to converge on an optimal number of requests to keep
filled.

On a 4 core host, an iperf -P 64 -t 60 run from dom0 to a 4 VCPU guest
improved from 5.1 Gbit/s to 5.6 Gbit/s.  Gains with more bursty
traffic are expected to be higher.
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sowmini Varadhan says:

====================
sunvnet: NAPIfy sunvnet

This patchset converts the sunvnet driver to use the NAPI framework.
Changes since v4 to Patch1:
  vnet_event accumulates LDC_EVENT_* bits into rx_event.
  vnet_event_napi() unrolls send_events() logic to process all rx_event bits.
Changes since v5:
  Patch 1: use net_device.h definition for NAPI_POLL_WEIGHT.
  Drop sparclinux changes (patch3) per David Miller feedback

Patch 1 in the series addresses the packet-receive path- all
the vnet_event() processing is moved into NAPI context.
This patch is dependant on the sparc-next commit:
  "sparc64: Add vio_set_intr() to enable/disable Rx interrupts"
  (sparc commit id ca605b7d)

Patch 2 uses RCU to fix race conditions between vnet_port_remove and
paths that access/modify port-related state, such as vnet_start_xmit.

Patch 3 leverages from the NAPIfied Rx path,
dropping superfluous usage of the irqsave/irqrestores on the vio.lock
where possible.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After the  NAPIfication of sunvnet, we no longer need to
synchronize by doing irqsave/restore on vio.lock in the
I/O fastpath.

NAPI ->poll() is non-reentrant, so all RX processing occurs
strictly in a serialized environment. TX reclaim is done in NAPI
context, so the netif_tx_lock can be used to serialize
critical sections between Tx and Rx paths.
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A vnet_port_remove could be triggered as a result of an ldm-unbind
operation by the peer, module unload, or other changes to the
inter-vnet-link configuration.  When this is concurrent with
vnet_start_xmit(), there are several race sequences possible,
such as

thread 1                                    thread 2
vnet_start_xmit
-> tx_port_find
   spin_lock_irqsave(&vp->lock..)
   ret = __tx_port_find(..)
   spin_lock_irqrestore(&vp->lock..)
                                           vio_remove -> ..
                                               ->vnet_port_remove
                                           spin_lock_irqsave(&vp->lock..)
                                           cleanup
                                           spin_lock_irqrestore(&vp->lock..)
                                           kfree(port)
/* attempt to use ret will bomb */

This patch adds RCU locking for port access so that vnet_port_remove
will correctly clean up port-related state.
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: NDwight Engen <dwight.engen@oracle.com>
Acked-by: NBob Picco <bob.picco@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move Rx packet procssing to the NAPI poll callback.
Disable VIO interrupt and unconditioanlly go into NAPI
context from vnet_event.

Note that we want to minimize the number of LDC
STOP/START messages sent. Specifically, do not send a STOP
message if vnet_walk_rx does not read all the available descriptors
because of the NAPI budget limitation. Instead, note the end index
as part of port state, and resume from this index when the
next poll callback is triggered.
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: NRaghuram Kothakota <raghuram.kothakota@oracle.com>
Acked-by: NDwight Engen <dwight.engen@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2014-10-23

This series contains updates to i40e and i40evf.

Jesse modifies the i40e driver to only notify the firmware on link up/down
and qualified module events.  Also simplified the job of managing link
state by using the admin queue receive event for link events as a signal
to tell the driver to update link state.

Jeff (me) cleans up the inconsistent use of tabs for indentation in the admin
queue command header file.

Neerav converts the use of udelay() to usleep_range().

Anjali fixes a bug where receive would stop after some stress by adding
a sleep and restart as well as moving the setting of flow control because
it should be done at a PF level and not a VSI level.

Mitch adds code to handle link events when updating the PF switch, which
allows link information to be properly provided to VFS in all cases.

Catherine adds driver support for 10GBaseT and bumps driver version.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

See Documentation/CodingStyle Chapter 6
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sebastian Hesselbarth says:

====================
Marvell PXA168 libphy handling and Berlin Ethernet

This patch series deals with a removing a IP feature that can be found
on all currently supported Marvell Ethernet IP (pxa168_eth, mv643xx_eth,
mvneta). The MAC IP allows to automatically perform PHY auto-negotiation
without software interaction.

However, this feature (a) fundamentally clashes with the way libphy works
and (b) is unable to deal with quirky PHYs that require special treatment.
In this series, pxa168_eth driver is rewritten to completely disable that
feature and properly deal with libphy provided PHYs.

As usual, a branch on top of v3.18-rc1 can be found at

git://git.infradead.org/users/hesselba/linux-berlin.git devel/bg2-bg2cd-eth-v2

Patches 1-5 should go through David's net tree, I'll pick up the DT patches
6-9.

There have been some changes,
compared to the RFT
- added phy-connection-type property to BG2Q PHY DT node
- bail out from pxa168_eth_adjust_link when there is no change in
  PHY parameters. Also, add a call to phy_print_status.
compared to v1
- move phy-connection-type to ethernet node instead of PHY node

Patch 1 adds support for Marvell 88E3016 FastEthernet PHY that is also
integrated in Marvell Berlin BG2/BG2CD SoCs.

Patch 2 allows to pass phy_interface_t on pxa168_eth platform_data that
is only used by mach-mmp/gplug. From the board setup, I guessed gplug's
PHY is connected via RMII. The patch still isn't even compile tested.

Patches 3-5 prepare proper libphy handling and finally remove all in-driver
PHY mangling related to the feature explained above.

Patches 6-9 add corresponding ethernet DT nodes to BG2, BG2CD, add a
phy-connection-type property to BG2Q and enable ethernet on BG2-based Sony
NSZ-GS7. I have tested all this on GS7 successfully with ip=dhcp on 100M FD.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With properly using libphy PHYs now, remove the in-driver PHY
mangling.
Tested-by: NAntoine Ténart <antoine.tenart@free-electrons.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Marvell Ethernet IP supports PHY negotiation driven by HW. This
fundamentally clashes with libphy (software) driven negotiation and
also cannot cope with quirky PHYs. Therefore, always disable any HW
negotiation features and properly use libphy's phy_device.
Tested-by: NAntoine Ténart <antoine.tenart@free-electrons.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Current libphy handling in pxa168_eth lacks proper phy_connect. Prepare
to fix this by first moving phy properties from platform_data to private
driver data.
Tested-by: NAntoine Ténart <antoine.tenart@free-electrons.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The PXA168 Ethernet IP support MII and RMII connection to its PHY.
Currently, pxa168 platform_data does not provide a way to pass that
and there is one user of pxa168 platform_data (mach-mmp/gplug).
Given the pinctrl settings of gplug it uses RMII, so add and pass
a corresponding phy_interface_t.
Tested-by: NAntoine Ténart <antoine.tenart@free-electrons.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Marvell 88E3016 is a FastEthernet PHY that also can be found in Marvell
Berlin SoCs as integrated PHY.
Tested-by: NAntoine Ténart <antoine.tenart@free-electrons.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As of commit e4dc601b ("m68k: Disable/restore interrupts in
hwreg_present()/hwreg_write()"), this is no longer needed.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As of commit e4dc601b ("m68k: Disable/restore interrupts in
hwreg_present()/hwreg_write()"), this is no longer needed.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>