- 10 4月, 2015 2 次提交
-
-
由 Michael Ellerman 提交于
We have a powerpc specific global called mem_init_done which is "set on boot once kmalloc can be called". But that's not *quite* true. We set it at the bottom of mem_init(), and rely on the fact that mm_init() calls kmem_cache_init() immediately after that, and nothing is running in parallel. So replace it with the generic and 100% correct slab_is_available(). Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Michael Ellerman 提交于
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> [mpe: Fix the 32-bit code also] Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 07 4月, 2015 7 次提交
-
-
由 Michael Ellerman 提交于
The callers of setbat() are actually passing a pgprot_t for the flags parameter. This doesn't matter unless STRICT_MM_TYPECHECKS is enabled. So we can turn that on without breaking the build, change setbat() to take a pgprot_t and have it convert it to an unsigned long internally. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Michael Ellerman 提交于
This is already declared in mmu_decl.h, so we don't need a second version in the C file. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Michael Ellerman 提交于
The celleb code has seen no actual development for ~7 years. We (maintainers) have no access to test hardware, and it is highly likely the code has bit-rotted. As far as we're aware the hardware was never widely available, and is certainly no longer available, and no one on the list has shown any interest in it over the years. So remove it. If anyone has one and cares please speak up. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NJeremy Kerr <jk@ozlabs.org>
-
由 Michael Ellerman 提交于
The powernv code has some conditional support for running on bare metal machines that have no OPAL firmware, but provide RTAS. No released machines ever supported that, and even in the lab it was just a transitional hack in the days when OPAL was still being developed. So remove the code. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NStewart Smith <stewart@linux.vnet.ibm.com>
-
由 Michael Ellerman 提交于
Merge branch 'next-remove-ldst' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc into next
-
git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux由 Michael Ellerman 提交于
Freescale updates from Scott: "Highlights include BMan device tree nodes, an MSI erratum workaround, a couple minor performance improvements, config updates, and misc fixes/cleanup."
-
- 01 4月, 2015 7 次提交
-
-
由 Shengzhou Liu 提交于
By default we enable CONFIG_I2C_MUX and CONFIG_I2C_MUX_PCA954x, which are needed on T2080QDS, T4240QDS, B4860QDS, etc. Signed-off-by: NShengzhou Liu <Shengzhou.Liu@freescale.com> [scottwood@freescale.com: fixed subject line] Signed-off-by: NScott Wood <scottwood@freescale.com>
-
由 Shengzhou Liu 提交于
RTC interrupt uses IRQ11 on T2080QDS. Signed-off-by: NShengzhou Liu <Shengzhou.Liu@freescale.com> [scottwood@freescale.com: fix subject line] Signed-off-by: NScott Wood <scottwood@freescale.com>
-
由 Bogdan Purcareata 提交于
After previous discussions regarding the subject [1][2], there's no clear explanation or reason why the call was needed in the first place. The sensible argument is some sort of synchronization between the CPU and the MPIC, which hasn't been pointed out precisely and is no longer required (at least on BookE platforms). The benefit of this change is saving a MMIO trap per interrupt when running in a KVM guest. [1] https://patchwork.ozlabs.org/patch/429098/ [2] https://patchwork.ozlabs.org/patch/433557/Signed-off-by: NBogdan Purcareata <bogdan.purcareata@freescale.com> Signed-off-by: NScott Wood <scottwood@freescale.com>
-
由 Yanjiang Jin 提交于
The k(un)map function may be called in atomic context in the function map_and_flush(), so use k(un)map_atomic to replace it, else we would get the below warning during kdump: BUG: sleeping function called from invalid context at include/linux/highmem.h:58 in_atomic(): 1, irqs_disabled(): 1, pid: 736, name: sh INFO: lockdep is turned off. irq event stamp: 0 hardirqs last enabled at (0): [< (null)>] (null) hardirqs last disabled at (0): [<c000000000066d1c>] .copy_process.part.44+0x50c/0x1360 softirqs last enabled at (0): [<c000000000066d1c>] .copy_process.part.44+0x50c/0x1360 softirqs last disabled at (0): [< (null)>] (null) CPU: 1 PID: 736 Comm: sh Tainted: G D W 3.10.62-ltsi-WR6.0.0.0_standard #2 Call Trace: [c0000000f47cf120] [c00000000000b150] .show_stack+0x170/0x290 (unreliable) [c0000000f47cf210] [c000000000b71334] .dump_stack+0x28/0x3c [c0000000f47cf280] [c0000000000bb5d8] .__might_sleep+0x1a8/0x270 [c0000000f47cf310] [c0000000000440cc] .map_and_flush+0x4c/0xc0 [c0000000f47cf390] [c0000000000441cc] .mpc85xx_smp_machine_kexec+0x8c/0xec0 [c0000000f47cf420] [c00000000002ae00] .machine_kexec+0x60/0x90 [c0000000f47cf4b0] [c00000000010957c] .crash_kexec+0x8c/0x100 [c0000000f47cf6a0] [c000000000015df8] .die+0x348/0x450 [c0000000f47cf740] [c00000000002f3a0] .bad_page_fault+0xe0/0x130 [c0000000f47cf7c0] [c00000000001f3e4] storage_fault_common+0x40/0x44 Signed-off-by: NYanjiang Jin <yanjiang.jin@windriver.com> [scottwood@freescale.com: fix subject line] Signed-off-by: NScott Wood <scottwood@freescale.com>
-
由 Julia Lawall 提交于
The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ type T; identifier f; @@ static T f (...) { ... } @@ identifier r.f; declarer name EXPORT_SYMBOL; @@ -EXPORT_SYMBOL(f); // </smpl> Furthermore, the function is never used, so its definition is dropped as well. Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NScott Wood <scottwood@freescale.com>
-
由 Kevin Hao 提交于
All the cache line size of the current book3e 64bit SoCs are 64 bytes. So we should use this size to align the member of paca_struct. This only change the paca_struct's members which are private to book3e CPUs, and should not have any effect to book3s ones. With this, we save 192 bytes. Also change it to __aligned(size) since it is preferred over __attribute__((aligned(size))). Before: /* size: 1920, cachelines: 30, members: 46 */ /* sum members: 1667, holes: 6, sum holes: 141 */ /* padding: 112 */ After: /* size: 1728, cachelines: 27, members: 46 */ /* sum members: 1667, holes: 4, sum holes: 13 */ /* padding: 48 */ Signed-off-by: NKevin Hao <haokexin@gmail.com> Signed-off-by: NScott Wood <scottwood@freescale.com>
-
由 Madalin Bucur 提交于
Signed-off-by: NMadalin Bucur <madalin.bucur@freescale.com> Signed-off-by: NScott Wood <scottwood@freescale.com>
-
- 31 3月, 2015 6 次提交
-
-
由 LEROY Christophe 提交于
This patch fixes a section mismatch warning WARNING: vmlinux.o(.text+0x213b6): Section mismatch in reference from the function chrp_init_early() to the variable .init.data:boot_command_line The function chrp_init_early() references the variable __initdata boot_command_line. This is often because chrp_init_early lacks a __initdata annotation or the annotation of boot_command_line is wrong. Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Cédric Le Goater 提交于
Currently, when a sensor value is read, the kernel calls OPAL, which in turn builds a message for the FSP, and waits for a message back. The new device tree for OPAL sensors [1] adds new sensors that can be read synchronously (core temperatures for instance) and that don't need to wait for a response. This patch modifies the opal call to accept an OPAL_SUCCESS return value and cover the case above. [1] https://lists.ozlabs.org/pipermail/skiboot/2015-March/000639.htmlSigned-off-by: NCédric Le Goater <clg@fr.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Cédric Le Goater 提交于
OPAL has its own list of return codes. The patch provides a translation of such codes in errnos for the opal_sensor_read call, and possibly others if needed. Signed-off-by: NCédric Le Goater <clg@fr.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Joe Perches 提交于
Use the normal return values for bool functions Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Gavin Shan 提交于
If M64 has been supported, the prefetchable 64-bits memory resources shouldn't be mapped to the corresponding PE# via M32DT. Unfortunately, we're doing that in pnv_ioda_setup_pe_seg() wrongly. The issue was introduced by commit 262af557 ("powerpc/powernv: Enable M64 aperatus for PHB3"). The patch fixes the issue by simply skipping M64 resources when updating to M32DT. Cc: <stable@vger.kernel.org> # v3.17+ Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Gavin Shan 提交于
The function eeh_add_parent_pe() is used to create a PE or add one edev to its parent PE. Current code checks if PE#0 is valid for the later case. Actually, we should validate PE#0 for both cases when EEH core regards PE#0 as invalid one (without flag EEH_VALID_PE_ZERO). Otherwise, not all EEH devices can be added to its parent PE#0 for EEH on P7IOC. The patch fixes the issue by validating PE#0 for the two cases. So far, we don't have PE#0 for EEH on P7IOC, but it will show up when we enable M64 for P7IOC. The patch also makes the error message more meaningful. Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 28 3月, 2015 3 次提交
-
-
由 Michael Ellerman 提交于
This adds a test of the switch_endian() syscall we added in the previous commit. We test it by calling the endian switch syscall, and then executing some code in the other endian to check everything went as expected. That code checks registers we expect to be maintained are. If the endian switch failed to happen that code sequence will be illegal and cause the test to abort. We then switch back to the original endian, do the same checks and finally write a success message and exit(0). Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Michael Ellerman 提交于
We currently have a "special" syscall for switching endianness. This is syscall number 0x1ebe, which is handled explicitly in the 64-bit syscall exception entry. That has a few problems, firstly the syscall number is outside of the usual range, which confuses various tools. For example strace doesn't recognise the syscall at all. Secondly it's handled explicitly as a special case in the syscall exception entry, which is complicated enough without it. As a first step toward removing the special syscall, we need to add a regular syscall that implements the same functionality. The logic is simple, it simply toggles the MSR_LE bit in the userspace MSR. This is the same as the special syscall, with the caveat that the special syscall clobbers fewer registers. This version clobbers r9-r12, XER, CTR, and CR0-1,5-7. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Tyrel Datwyler 提交于
During suspend/migration operation we must wait for the VASI state reported by the hypervisor to become Suspending prior to making the ibm,suspend-me RTAS call. Calling routines to rtas_ibm_supend_me() pass a vasi_state variable that exposes the VASI state to the caller. This is unnecessary as the caller only really cares about the following three conditions; if there is an error we should bailout, success indicating we have suspended and woken back up so proceed to device tree update, or we are not suspendable yet so try calling rtas_ibm_suspend_me again shortly. This patch removes the extraneous vasi_state variable and simply uses the return code to communicate how to proceed. We either succeed, fail, or get -EAGAIN in which case we sleep for a second before trying to call rtas_ibm_suspend_me again. The behaviour of ppc_rtas() remains the same, but migrate_store() now returns the propogated error code on failure. Previously -1 was returned from migrate_store() in the failure case which equates to -EPERM and was clearly wrong. Signed-off-by: NTyrel Datwyler <tyreld@linux.vnet.ibm.com> Cc: Nathan Fontenont <nfont@linux.vnet.ibm.com> Cc: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 27 3月, 2015 2 次提交
-
-
由 Philippe Bergheaud 提交于
Fix the attribute name of the configuration record class ID. Signed-off-by: NPhilippe Bergheaud <felix@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Jan Stancek 提交于
One path in power_pmu_event_init() calls get_cpu_var(), but is missing matching call to put_cpu_var(), which causes preemption imbalance and crash in user-space: Page fault in user mode with in_atomic() = 1 mm = c000001fefa5a280 NIP = 3fff9bf2cae0 MSR = 900000014280f032 Oops: Weird page fault, sig: 11 [#23] SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: <snip> CPU: 43 PID: 10285 Comm: a.out Tainted: G D 4.0.0-rc5+ #1 task: c000001fe82c9200 ti: c000001fe835c000 task.ti: c000001fe835c000 NIP: 00003fff9bf2cae0 LR: 00003fff9bee4898 CTR: 00003fff9bf2cae0 REGS: c000001fe835fea0 TRAP: 0401 Tainted: G D (4.0.0-rc5+) MSR: 900000014280f032 <SF,HV,VEC,VSX,EE,PR,FP,ME,IR,DR,RI> CR: 22000028 XER: 00000000 CFAR: 00003fff9bee4894 SOFTE: 1 GPR00: 00003fff9bee494c 00003fffe01c2ee0 00003fff9c084410 0000000010020068 GPR04: 0000000000000000 0000000000000002 0000000000000008 0000000000000001 GPR08: 0000000000000001 00003fff9c074a30 00003fff9bf2cae0 00003fff9bf2cd70 GPR12: 0000000052000022 00003fff9c10b700 NIP [00003fff9bf2cae0] 0x3fff9bf2cae0 LR [00003fff9bee4898] 0x3fff9bee4898 Call Trace: ---[ end trace 5d3d952b5d4185d4 ]--- BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:41 in_atomic(): 1, irqs_disabled(): 0, pid: 10285, name: a.out INFO: lockdep is turned off. CPU: 43 PID: 10285 Comm: a.out Tainted: G D 4.0.0-rc5+ #1 Call Trace: [c000001fe835f990] [c00000000089c014] .dump_stack+0x98/0xd4 (unreliable) [c000001fe835fa10] [c0000000000e4138] .___might_sleep+0x1d8/0x2e0 [c000001fe835faa0] [c000000000888da8] .down_read+0x38/0x110 [c000001fe835fb30] [c0000000000bf2f4] .exit_signals+0x24/0x160 [c000001fe835fbc0] [c0000000000abde0] .do_exit+0xd0/0xe70 [c000001fe835fcb0] [c00000000001f4c4] .die+0x304/0x450 [c000001fe835fd60] [c00000000088e1f4] .do_page_fault+0x2d4/0x900 [c000001fe835fe30] [c000000000008664] handle_page_fault+0x10/0x30 note: a.out[10285] exited with preempt_count 1 Reproducer: #include <stdio.h> #include <unistd.h> #include <syscall.h> #include <sys/types.h> #include <sys/stat.h> #include <linux/perf_event.h> #include <linux/hw_breakpoint.h> static struct perf_event_attr event = { .type = PERF_TYPE_RAW, .size = sizeof(struct perf_event_attr), .sample_type = PERF_SAMPLE_BRANCH_STACK, .branch_sample_type = PERF_SAMPLE_BRANCH_ANY_RETURN, }; int main() { syscall(__NR_perf_event_open, &event, 0, -1, -1, 0); } Signed-off-by: NJan Stancek <jstancek@redhat.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 26 3月, 2015 4 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Michael Ellerman 提交于
Merge miscellaneous bits from benh. Fix a minor conflict with OpalMessageType changing names to opal_msg_type.
-
由 Preeti U Murthy 提交于
We currently read the information about idle states from the device tree, so as to find out the CPU idle states supported by the platform. Use the of_property_read/count_xxx() APIs, which handle endian conversions for us, and mean we don't need any endian annotations in the code. Signed-off-by: NPreeti U Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Yannick Guerrini 提交于
Change 'prosessor' to 'processor' Change 'set_inteval' to 'set_interval' Signed-off-by: NYannick Guerrini <yguerrini@tomshardware.fr> Acked-by: NGeoff Levand <geoff@infradead.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Yanjiang Jin 提交于
kmem_cache_create()->kmem_cache_create_memcg()->kstrdup() allocates new space and copys name's content, so it is safe to free name memory after calling kmem_cache_create(). Else kmemleak will report the below warning: unreferenced object 0xc0000000f9002160 (size 16): comm "swapper/0", pid 0, jiffies 4294892296 (age 1386.640s) hex dump (first 16 bytes): 70 67 74 61 62 6c 65 2d 32 5e 39 00 de ad be ef pgtable-2^9..... backtrace: [<c0000000004e03ec>] .kvasprintf+0x5c/0xa0 [<c0000000004e045c>] .kasprintf+0x2c/0x50 [<c00000000002e36c>] .pgtable_cache_add+0xac/0x100 [<c00000000002e3e4>] .pgtable_cache_init+0x24/0x80 [<c000000000c6c67c>] .start_kernel+0x228/0x4c8 [<c000000000000594>] .start_here_common+0x24/0x90 Signed-off-by: NYanjiang Jin <yanjiang.jin@windriver.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 25 3月, 2015 8 次提交
-
-
由 Neelesh Gupta 提交于
Provide an unregister interface for the opal message notifiers to be called when not needed like during driver unload/remove. Signed-off-by: NNeelesh Gupta <neelegup@linux.vnet.ibm.com> Reviewed-by: NVasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Neelesh Gupta 提交于
Fixes the condition check of incoming message type which can otherwise shoot beyond the message notifiers head array. Signed-off-by: NNeelesh Gupta <neelegup@linux.vnet.ibm.com> Reviewed-by: NVasant Hegde <hegdevasant@linux.vnet.ibm.com> Reviewed-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Fabian Frederick 提交于
Use helper functions to access current->state. Direct assignments are prone to races and therefore buggy. current->state = TASK_RUNNING can be replaced by __set_current_state() Thanks to Peter Zijlstra for the exact definition of the problem. Suggested-By: NPeter Zijlstra <peterz@infradead.org> Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Geert Uytterhoeven 提交于
If CONFIG_SMP=n, <linux/smp.h> does not include <asm/smp.h>, causing: drivers/cpufreq/ppc-corenet-cpufreq.c: In function 'corenet_cpufreq_cpu_init': drivers/cpufreq/ppc-corenet-cpufreq.c:173:3: error: implicit declaration of function 'get_hard_smp_processor_id' [-Werror=implicit-funcuresh E. Warrier" <warrier@linux.vnet.ibm.com> X-Patchwork-Id: 443703 Message-Id: <54EE5989.7010800@linux.vnet.ibm.com> To: linuxppc-dev@ozlabs.org Date: Wed, 25 Feb 2015 17:23:53 -0600 Export __spin_yield so that the arch_spin_unlock() function can be invoked from a module. This will be required for modules where we want to take a lock that is also is acquired in hypervisor real mode. Because we want to avoid running any lockdep code (which may not be safe in real mode), this lock needs to be an arch_spinlock_t instead of a normal spinlock. Signed-off-by: NSuresh Warrier <warrier@linux.vnet.ibm.com> Acked-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Geert Uytterhoeven 提交于
Internally, of_find_node_by_name() calls of_node_put() on its "from" parameter, which must not be done on "master", as it's still in use, and will be released manually later. This may cause a zero kref refcount. Call of_node_get() before to compensate for this. Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Markus Elfring 提交于
The of_node_put() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
If OPAL requests it, call it back via opal_poll_events() at a regular interval. Some versions of OPAL on some machines require this to operate some internal timeouts properly. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Vasant Hegde 提交于
Present code checks for update_flash_data in opal_flash_term_callback(). update_flash_data has been statically initialized to zero, and that is the value of FLASH_IMG_READY. Also code update initialization happens during subsys init. So if reboot is issued before the subsys init stage then we endup displaying "Flashing new firmware" message.. which may confuse end user. This patch fixes above described issue by initializes update_flash status to invalid state. Reported-by: NSam Bobroff <sam.bobroff@au1.ibm.com> Signed-off-by: NVasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 24 3月, 2015 1 次提交
-
-
由 David Gibson 提交于
The powerpc specific st_le*() and ld_le*() functions in arch/powerpc/asm/swab.h no longer have any users. They are also misleadingly named, since they always byteswap, even on a little-endian host. This patch removes them. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-