Currently task hung checking interval is equal to timeout, as the result
hung is detected anywhere between timeout and 2*timeout.  This is fine for
most interactive environments, but this hurts automated testing setups
(syzbot).  In an automated setup we need to strictly order CPU lockup <
RCU stall < workqueue lockup < task hung < silent loss, so that RCU stall
is not detected as task hung and task hung is not detected as silent
machine loss.  The large variance in task hung detection timeout requires
setting silent machine loss timeout to a very large value (e.g.  if task
hung is 3 mins, then silent loss need to be set to ~7 mins).  The
additional 3 minutes significantly reduce testing efficiency because
usually we crash kernel within a minute, and this can add hours to bug
localization process as it needs to do dozens of tests.

Allow setting checking interval separately from timeout.  This allows to
set timeout to, say, 3 minutes, but checking interval to 10 secs.

The interval is controlled via a new hung_task_check_interval_secs sysctl,
similar to the existing hung_task_timeout_secs sysctl.  The default value
of 0 results in the current behavior: checking interval is equal to
timeout.

[akpm@linux-foundation.org: update hung_task_timeout_max's comment]
Link: http://lkml.kernel.org/r/20180611111004.203513-1-dvyukov@google.comSigned-off-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce new config option, which is used to replace repeating
CONFIG_MEMCG && !CONFIG_SLOB pattern.  Next patches add a little more
memcg+kmem related code, so let's keep the defines more clearly.

Link: http://lkml.kernel.org/r/153063053670.1818.15013136946600481138.stgit@localhost.localdomainSigned-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: NVladimir Davydov <vdavydov.dev@gmail.com>
Tested-by: NShakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 3812c8c8 ("mm: memcg: do not trap chargers with full
callstack on OOM") has changed the ENOMEM semantic of memcg charges.
Rather than invoking the oom killer from the charging context it delays
the oom killer to the page fault path (pagefault_out_of_memory).  This
in turn means that many users (e.g.  slab or g-u-p) will get ENOMEM when
the corresponding memcg hits the hard limit and the memcg is is OOM.
This is behavior is inconsistent with !memcg case where the oom killer
is invoked from the allocation context and the allocator keeps retrying
until it succeeds.

The difference in the behavior is user visible.  mmap(MAP_POPULATE)
might result in not fully populated ranges while the mmap return code
doesn't tell that to the userspace.  Random syscalls might fail with
ENOMEM etc.

The primary motivation of the different memcg oom semantic was the
deadlock avoidance.  Things have changed since then, though.  We have an
async oom teardown by the oom reaper now and so we do not have to rely
on the victim to tear down its memory anymore.  Therefore we can return
to the original semantic as long as the memcg oom killer is not handed
over to the users space.

There is still one thing to be careful about here though.  If the oom
killer is not able to make any forward progress - e.g.  because there is
no eligible task to kill - then we have to bail out of the charge path
to prevent from same class of deadlocks.  We have basically two options
here.  Either we fail the charge with ENOMEM or force the charge and
allow overcharge.  The first option has been considered more harmful
than useful because rare inconsistencies in the ENOMEM behavior is hard
to test for and error prone.  Basically the same reason why the page
allocator doesn't fail allocations under such conditions.  The later
might allow runaways but those should be really unlikely unless somebody
misconfigures the system.  E.g.  allowing to migrate tasks away from the
memcg to a different unlimited memcg with move_charge_at_immigrate
disabled.

Link: http://lkml.kernel.org/r/20180628151101.25307-1-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NGreg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "Directed kmem charging", v8.

The Linux kernel's memory cgroup allows limiting the memory usage of the
jobs running on the system to provide isolation between the jobs.  All
the kernel memory allocated in the context of the job and marked with
__GFP_ACCOUNT will also be included in the memory usage and be limited
by the job's limit.

The kernel memory can only be charged to the memcg of the process in
whose context kernel memory was allocated.  However there are cases
where the allocated kernel memory should be charged to the memcg
different from the current processes's memcg.  This patch series
contains two such concrete use-cases i.e.  fsnotify and buffer_head.

The fsnotify event objects can consume a lot of system memory for large
or unlimited queues if there is either no or slow listener.  The events
are allocated in the context of the event producer.  However they should
be charged to the event consumer.  Similarly the buffer_head objects can
be allocated in a memcg different from the memcg of the page for which
buffer_head objects are being allocated.

To solve this issue, this patch series introduces mechanism to charge
kernel memory to a given memcg.  In case of fsnotify events, the memcg
of the consumer can be used for charging and for buffer_head, the memcg
of the page can be charged.  For directed charging, the caller can use
the scope API memalloc_[un]use_memcg() to specify the memcg to charge
for all the __GFP_ACCOUNT allocations within the scope.

This patch (of 2):

A lot of memory can be consumed by the events generated for the huge or
unlimited queues if there is either no or slow listener.  This can cause
system level memory pressure or OOMs.  So, it's better to account the
fsnotify kmem caches to the memcg of the listener.

However the listener can be in a different memcg than the memcg of the
producer and these allocations happen in the context of the event
producer.  This patch introduces remote memcg charging API which the
producer can use to charge the allocations to the memcg of the listener.

There are seven fsnotify kmem caches and among them allocations from
dnotify_struct_cache, dnotify_mark_cache, fanotify_mark_cache and
inotify_inode_mark_cachep happens in the context of syscall from the
listener.  So, SLAB_ACCOUNT is enough for these caches.

The objects from fsnotify_mark_connector_cachep are not accounted as
they are small compared to the notification mark or events and it is
unclear whom to account connector to since it is shared by all events
attached to the inode.

The allocations from the event caches happen in the context of the event
producer.  For such caches we will need to remote charge the allocations
to the listener's memcg.  Thus we save the memcg reference in the
fsnotify_group structure of the listener.

This patch has also moved the members of fsnotify_group to keep the size
same, at least for 64 bit build, even with additional member by filling
the holes.

[shakeelb@google.com: use GFP_KERNEL_ACCOUNT rather than open-coding it]
  Link: http://lkml.kernel.org/r/20180702215439.211597-1-shakeelb@google.com
Link: http://lkml.kernel.org/r/20180627191250.209150-2-shakeelb@google.comSigned-off-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

'numa_entry' is a struct list_head defined in task_struct, but never used.

No functional change.
Signed-off-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NRik van Riel <riel@surriel.com>
Acked-by: NMel Gorman <mgorman@techsingularity.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1529514181-9842-2-git-send-email-srikar@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Everywhere except in the pid array we distinguish between a tasks pid and
a tasks tgid (thread group id).  Even in the enumeration we want that
distinction sometimes so we have added __PIDTYPE_TGID.  With leader_pid
we almost have an implementation of PIDTYPE_TGID in struct signal_struct.

Add PIDTYPE_TGID as a first class member of the pid_type enumeration and
into the pids array.  Then remove the __PIDTYPE_TGID special case and the
leader_pid in signal_struct.

The net size increase is just an extra pointer added to struct pid and
an extra pair of pointers of an hlist_node added to task_struct.

The effect on code maintenance is the removal of a number of special
cases today and the potential to remove many more special cases as
PIDTYPE_TGID gets used to it's fullest.  The long term potential
is allowing zombie thread group leaders to exit, which will remove
a lot more special cases in the code.
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

To access these fields the code always has to go to group leader so
going to signal struct is no loss and is actually a fundamental simplification.

This saves a little bit of memory by only allocating the pid pointer array
once instead of once for every thread, and even better this removes a
few potential races caused by the fact that group_leader can be changed
by de_thread, while signal_struct can not.
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

The cost is the the same and this removes the need
to worry about complications that come from de_thread
and group_leader changing.

__task_pid_nr_ns has been updated to take advantage of this change.
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Both the implementation and the users' expectation [1] for the various
wakeup primitives have evolved over time, but the documentation has not
kept up with these changes: brings it into 2018.

[1] http://lkml.kernel.org/r/20180424091510.GB4064@hirez.programming.kicks-ass.net

Also applied feedback from Alan Stern.
Suggested-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NAndrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Akira Yokosawa <akiyks@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Daniel Lustig <dlustig@nvidia.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arch@vger.kernel.org
Cc: parri.andrea@gmail.com
Link: http://lkml.kernel.org/r/20180716180605.16115-12-paulmck@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Since IO can be issued from literally anywhere it's almost impossible to
do throttling without having some sort of adverse effect somewhere else
in the system because of locking or other dependencies.  The best way to
solve this is to do the throttling when we know we aren't holding any
other kernel resources.  Do this by tracking throttling in a per-blkg
basis, and if we require throttling flag the task that it needs to check
before it returns to user space and possibly sleep there.

This is to address the case where a process is doing work that is
generating IO that can't be throttled, whether that is directly with a
lot of REQ_META IO, or indirectly by allocating so much memory that it
is swamping the disk with REQ_SWAP.  We can't use task_add_work as we
don't want to induce a memory allocation in the IO path, so simply
saving the request queue in the task and flagging it to do the
notify_resume thing achieves the same result without the overhead of a
memory allocation.
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Gaurav reports that commit:

  85f1abe0 ("kthread, sched/wait: Fix kthread_parkme() completion issue")

isn't working for him. Because of the following race:

> controller Thread                               CPUHP Thread
> takedown_cpu
> kthread_park
> kthread_parkme
> Set KTHREAD_SHOULD_PARK
>                                                 smpboot_thread_fn
>                                                 set Task interruptible
>
>
> wake_up_process
>  if (!(p->state & state))
>                 goto out;
>
>                                                 Kthread_parkme
>                                                 SET TASK_PARKED
>                                                 schedule
>                                                 raw_spin_lock(&rq->lock)
> ttwu_remote
> waiting for __task_rq_lock
>                                                 context_switch
>
>                                                 finish_lock_switch
>
>
>
>                                                 Case TASK_PARKED
>                                                 kthread_park_complete
>
>
> SET Running

Furthermore, Oleg noticed that the whole scheduler TASK_PARKED
handling is buggered because the TASK_DEAD thing is done with
preemption disabled, the current code can still complete early on
preemption :/

So basically revert that earlier fix and go with a variant of the
alternative mentioned in the commit. Promote TASK_PARKED to special
state to avoid the store-store issue on task->state leading to the
WARN in kthread_unpark() -> __kthread_bind().

But in addition, add wait_task_inactive() to kthread_park() to ensure
the task really is PARKED when we return from kthread_park(). This
avoids the whole kthread still gets migrated nonsense -- although it
would be really good to get this done differently.
Reported-by: NGaurav Kohli <gkohli@codeaurora.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 85f1abe0 ("kthread, sched/wait: Fix kthread_parkme() completion issue")
Signed-off-by: NIngo Molnar <mingo@kernel.org>

When delivering a signal to a task that is using rseq, we call into
__rseq_handle_notify_resume() so that the registers pushed in the
sigframe are updated to reflect the state of the restartable sequence
(for example, ensuring that the signal returns to the abort handler if
necessary).

However, if the rseq management fails due to an unrecoverable fault when
accessing userspace or certain combinations of RSEQ_CS_* flags, then we
will attempt to deliver a SIGSEGV. This has the potential for infinite
recursion if the rseq code continuously fails on signal delivery.

Avoid this problem by using force_sigsegv() instead of force_sig(), which
is explicitly designed to reset the SEGV handler to SIG_DFL in the case
of a recursive fault. In doing so, remove rseq_signal_deliver() from the
internal rseq API and have an optional struct ksignal * parameter to
rseq_handle_notify_resume() instead.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: peterz@infradead.org
Cc: paulmck@linux.vnet.ibm.com
Cc: boqun.feng@gmail.com
Link: https://lkml.kernel.org/r/1529664307-983-1-git-send-email-will.deacon@arm.com

Considering that we explicitly forbid system calls in rseq critical
sections, it is not valid to issue a fork or clone system call within a
rseq critical section, so rseq_fork() is not required to restart an
active rseq c.s. in the child process.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ben Maurer <bmaurer@fb.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Lameter <cl@linux.com>
Cc: Dave Watson <davejwatson@fb.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-api@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Link: https://lore.kernel.org/lkml/20180619133230.4087-4-mathieu.desnoyers@efficios.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

During a context switch, we first switch_mm() to the next task's mm,
then switch_to() that new task.  This means that vmalloc'd regions which
had previously been faulted in can transiently disappear in the context
of the prev task.

Functions instrumented by KCOV may try to access a vmalloc'd kcov_area
during this window, and as the fault handling code is instrumented, this
results in a recursive fault.

We must avoid accessing any kcov_area during this window.  We can do so
with a new flag in kcov_mode, set prior to switching the mm, and cleared
once the new task is live.  Since task_struct::kcov_mode isn't always a
specific enum kcov_mode value, this is made an unsigned int.

The manipulation is hidden behind kcov_{prepare,finish}_switch() helpers,
which are empty for !CONFIG_KCOV kernels.

The code uses macros because I can't use static inline functions without a
circular include dependency between <linux/sched.h> and <linux/kcov.h>,
since the definition of task_struct uses things defined in <linux/kcov.h>

Link: http://lkml.kernel.org/r/20180504135535.53744-4-mark.rutland@arm.comSigned-off-by: NMark Rutland <mark.rutland@arm.com>
Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The changes to automatically test for working stack protector compiler
support in the Kconfig files removed the special STACKPROTECTOR_AUTO
option that picked the strongest stack protector that the compiler
supported.

That was all a nice cleanup - it makes no sense to have the AUTO case
now that the Kconfig phase can just determine the compiler support
directly.

HOWEVER.

It also meant that doing "make oldconfig" would now _disable_ the strong
stackprotector if you had AUTO enabled, because in a legacy config file,
the sane stack protector configuration would look like

  CONFIG_HAVE_CC_STACKPROTECTOR=y
  # CONFIG_CC_STACKPROTECTOR_NONE is not set
  # CONFIG_CC_STACKPROTECTOR_REGULAR is not set
  # CONFIG_CC_STACKPROTECTOR_STRONG is not set
  CONFIG_CC_STACKPROTECTOR_AUTO=y

and when you ran this through "make oldconfig" with the Kbuild changes,
it would ask you about the regular CONFIG_CC_STACKPROTECTOR (that had
been renamed from CONFIG_CC_STACKPROTECTOR_REGULAR to just
CONFIG_CC_STACKPROTECTOR), but it would think that the STRONG version
used to be disabled (because it was really enabled by AUTO), and would
disable it in the new config, resulting in:

  CONFIG_HAVE_CC_STACKPROTECTOR=y
  CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
  CONFIG_CC_STACKPROTECTOR=y
  # CONFIG_CC_STACKPROTECTOR_STRONG is not set
  CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

That's dangerously subtle - people could suddenly find themselves with
the weaker stack protector setup without even realizing.

The solution here is to just rename not just the old RECULAR stack
protector option, but also the strong one.  This does that by just
removing the CC_ prefix entirely for the user choices, because it really
is not about the compiler support (the compiler support now instead
automatially impacts _visibility_ of the options to users).

This results in "make oldconfig" actually asking the user for their
choice, so that we don't have any silent subtle security model changes.
The end result would generally look like this:

  CONFIG_HAVE_CC_STACKPROTECTOR=y
  CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
  CONFIG_STACKPROTECTOR=y
  CONFIG_STACKPROTECTOR_STRONG=y
  CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

where the "CC_" versions really are about internal compiler
infrastructure, not the user selections.
Acked-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Expose a new system call allowing each thread to register one userspace
memory area to be used as an ABI between kernel and user-space for two
purposes: user-space restartable sequences and quick access to read the
current CPU number value from user-space.

* Restartable sequences (per-cpu atomics)

Restartables sequences allow user-space to perform update operations on
per-cpu data without requiring heavy-weight atomic operations.

The restartable critical sections (percpu atomics) work has been started
by Paul Turner and Andrew Hunter. It lets the kernel handle restart of
critical sections. [1] [2] The re-implementation proposed here brings a
few simplifications to the ABI which facilitates porting to other
architectures and speeds up the user-space fast path.

Here are benchmarks of various rseq use-cases.

Test hardware:

arm32: ARMv7 Processor rev 4 (v7l) "Cubietruck", 2-core
x86-64: Intel E5-2630 v3@2.40GHz, 16-core, hyperthreading

The following benchmarks were all performed on a single thread.

* Per-CPU statistic counter increment

                getcpu+atomic (ns/op)    rseq (ns/op)    speedup
arm32:                344.0                 31.4          11.0
x86-64:                15.3                  2.0           7.7

* LTTng-UST: write event 32-bit header, 32-bit payload into tracer
             per-cpu buffer

                getcpu+atomic (ns/op)    rseq (ns/op)    speedup
arm32:               2502.0                 2250.0         1.1
x86-64:               117.4                   98.0         1.2

* liburcu percpu: lock-unlock pair, dereference, read/compare word

                getcpu+atomic (ns/op)    rseq (ns/op)    speedup
arm32:                751.0                 128.5          5.8
x86-64:                53.4                  28.6          1.9

* jemalloc memory allocator adapted to use rseq

Using rseq with per-cpu memory pools in jemalloc at Facebook (based on
rseq 2016 implementation):

The production workload response-time has 1-2% gain avg. latency, and
the P99 overall latency drops by 2-3%.

* Reading the current CPU number

Speeding up reading the current CPU number on which the caller thread is
running is done by keeping the current CPU number up do date within the
cpu_id field of the memory area registered by the thread. This is done
by making scheduler preemption set the TIF_NOTIFY_RESUME flag on the
current thread. Upon return to user-space, a notify-resume handler
updates the current CPU value within the registered user-space memory
area. User-space can then read the current CPU number directly from
memory.

Keeping the current cpu id in a memory area shared between kernel and
user-space is an improvement over current mechanisms available to read
the current CPU number, which has the following benefits over
alternative approaches:

- 35x speedup on ARM vs system call through glibc
- 20x speedup on x86 compared to calling glibc, which calls vdso
  executing a "lsl" instruction,
- 14x speedup on x86 compared to inlined "lsl" instruction,
- Unlike vdso approaches, this cpu_id value can be read from an inline
  assembly, which makes it a useful building block for restartable
  sequences.
- The approach of reading the cpu id through memory mapping shared
  between kernel and user-space is portable (e.g. ARM), which is not the
  case for the lsl-based x86 vdso.

On x86, yet another possible approach would be to use the gs segment
selector to point to user-space per-cpu data. This approach performs
similarly to the cpu id cache, but it has two disadvantages: it is
not portable, and it is incompatible with existing applications already
using the gs segment selector for other purposes.

Benchmarking various approaches for reading the current CPU number:

ARMv7 Processor rev 4 (v7l)
Machine model: Cubietruck
- Baseline (empty loop):                                    8.4 ns
- Read CPU from rseq cpu_id:                               16.7 ns
- Read CPU from rseq cpu_id (lazy register):               19.8 ns
- glibc 2.19-0ubuntu6.6 getcpu:                           301.8 ns
- getcpu system call:                                     234.9 ns

x86-64 Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz:
- Baseline (empty loop):                                    0.8 ns
- Read CPU from rseq cpu_id:                                0.8 ns
- Read CPU from rseq cpu_id (lazy register):                0.8 ns
- Read using gs segment selector:                           0.8 ns
- "lsl" inline assembly:                                   13.0 ns
- glibc 2.19-0ubuntu6 getcpu:                              16.6 ns
- getcpu system call:                                      53.9 ns

- Speed (benchmark taken on v8 of patchset)

Running 10 runs of hackbench -l 100000 seems to indicate, contrary to
expectations, that enabling CONFIG_RSEQ slightly accelerates the
scheduler:

Configuration: 2 sockets * 8-core Intel(R) Xeon(R) CPU E5-2630 v3 @
2.40GHz (directly on hardware, hyperthreading disabled in BIOS, energy
saving disabled in BIOS, turboboost disabled in BIOS, cpuidle.off=1
kernel parameter), with a Linux v4.6 defconfig+localyesconfig,
restartable sequences series applied.

* CONFIG_RSEQ=n

avg.:      41.37 s
std.dev.:   0.36 s

* CONFIG_RSEQ=y

avg.:      40.46 s
std.dev.:   0.33 s

- Size

On x86-64, between CONFIG_RSEQ=n/y, the text size increase of vmlinux is
567 bytes, and the data size increase of vmlinux is 5696 bytes.

[1] https://lwn.net/Articles/650333/
[2] http://www.linuxplumbersconf.org/2013/ocw/system/presentations/1695/original/LPC%20-%20PerCpu%20Atomics.pdfSigned-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Watson <davejwatson@fb.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Chris Lameter <cl@linux.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Andrew Hunter <ahh@google.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Maurer <bmaurer@fb.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-api@vger.kernel.org
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20151027235635.16059.11630.stgit@pjt-glaptop.roam.corp.google.com
Link: http://lkml.kernel.org/r/20150624222609.6116.86035.stgit@kitami.mtv.corp.google.com
Link: https://lkml.kernel.org/r/20180602124408.8430-3-mathieu.desnoyers@efficios.com

There are a number of bits of code sprinkled around the kernel to
set a thread flag if a certain condition is true, and clear it
otherwise.

To help make those call sites terser and less cumbersome, this
patch adds a new family of thread flag manipulators

	update*_thread_flag([...,] flag, cond)

which do the equivalent of:

	if (cond)
		set*_thread_flag([...,] flag);
	else
		clear*_thread_flag([...,] flag);
Signed-off-by: NDave Martin <Dave.Martin@arm.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Acked-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

The cond_resched_softirq() macro is not used anywhere in mainline, so
this commit simplifies the kernel by eliminating it.
Suggested-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Tested-by: NNicholas Piggin <npiggin@gmail.com>

sched/core: Distinguish between idle_cpu() calls based on desired effect, introduce available_idle_cpu()

In the following commit:

  247f2f6f ("sched/core: Don't schedule threads on pre-empted vCPUs")

... we distinguish between idle_cpu() when the vCPU is not running for
scheduling threads.

However, the idle_cpu() function is used in other places for
actually checking whether the state of the CPU is idle or not.

Hence split the use of that function based on the desired return value,
by introducing the available_idle_cpu() function.

This fixes a (slight) regression in that initial vCPU commit, because
some code paths (like the load-balancer) don't care and shouldn't care
if the vCPU is preempted or not, they just want to know if there's any
tasks on the CPU.
Signed-off-by: NRohit Jain <rohit.k.jain@oracle.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dhaval.giani@oracle.com
Cc: linux-kernel@vger.kernel.org
Cc: matt@codeblueprint.co.uk
Cc: steven.sistare@oracle.com
Cc: subhra.mazumdar@oracle.com
Link: http://lkml.kernel.org/r/1525883988-10356-1-git-send-email-rohit.k.jain@oracle.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

For certain use cases it is desired to enforce mitigations so they cannot
be undone afterwards. That's important for loader stubs which want to
prevent a child from disabling the mitigation again. Will also be used for
seccomp(). The extra state preserving of the prctl state for SSB is a
preparatory step for EBPF dymanic speculation control.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Gaurav reported a perceived problem with TASK_PARKED, which turned out
to be a broken wait-loop pattern in __kthread_parkme(), but the
reported issue can (and does) in fact happen for states that do not do
condition based sleeps.

When the 'current->state = TASK_RUNNING' store of a previous
(concurrent) try_to_wake_up() collides with the setting of a 'special'
sleep state, we can loose the sleep state.

Normal condition based wait-loops are immune to this problem, but for
sleep states that are not condition based are subject to this problem.

There already is a fix for TASK_DEAD. Abstract that and also apply it
to TASK_STOPPED and TASK_TRACED, both of which are also without
condition based wait-loop.
Reported-by: NGaurav Kohli <gkohli@codeaurora.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NOleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

For some as yet not understood reason, Tony gets unaligned access
traps on IA64 because of:

  struct util_est ue = READ_ONCE(p->se.avg.util_est);

and:

  WRITE_ONCE(p->se.avg.util_est, ue);

introduced by commit:

  d519329f ("sched/fair: Update util_est only on util_avg updates")

Normally those two fields should end up on an 8-byte aligned location,
but UP and RANDSTRUCT can mess that up so enforce the alignment
explicitly.

Also make the alignment on sched_avg unconditional, as it is really
about data locality, not false-sharing.

With or without this patch the layout for sched_avg on a
ia64-defconfig build looks like:

	$ pahole -EC sched_avg ia64-defconfig/kernel/sched/core.o
	die__process_function: tag not supported (INVALID)!
	struct sched_avg {
		/* typedef u64 */ long long unsigned int     last_update_time;                   /*     0     8 */
		/* typedef u64 */ long long unsigned int     load_sum;                           /*     8     8 */
		/* typedef u64 */ long long unsigned int     runnable_load_sum;                  /*    16     8 */
		/* typedef u32 */ unsigned int               util_sum;                           /*    24     4 */
		/* typedef u32 */ unsigned int               period_contrib;                     /*    28     4 */
		long unsigned int          load_avg;                                             /*    32     8 */
		long unsigned int          runnable_load_avg;                                    /*    40     8 */
		long unsigned int          util_avg;                                             /*    48     8 */
		struct util_est {
			unsigned int       enqueued;                                             /*    56     4 */
			unsigned int       ewma;                                                 /*    60     4 */
		} util_est; /*    56     8 */
		/* --- cacheline 1 boundary (64 bytes) --- */

		/* size: 64, cachelines: 1, members: 9 */
	};
Reported-and-Tested-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Norbert Manthey <nmanthey@amazon.de>
Cc: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony <tony.luck@intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Fixes: d519329f ("sched/fair: Update util_est only on util_avg updates")
Link: http://lkml.kernel.org/r/20180405080521.GG4129@hirez.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

The util_avg signal computed by PELT is too variable for some use-cases.
For example, a big task waking up after a long sleep period will have its
utilization almost completely decayed. This introduces some latency before
schedutil will be able to pick the best frequency to run a task.

The same issue can affect task placement. Indeed, since the task
utilization is already decayed at wakeup, when the task is enqueued in a
CPU, this can result in a CPU running a big task as being temporarily
represented as being almost empty. This leads to a race condition where
other tasks can be potentially allocated on a CPU which just started to run
a big task which slept for a relatively long period.

Moreover, the PELT utilization of a task can be updated every [ms], thus
making it a continuously changing value for certain longer running
tasks. This means that the instantaneous PELT utilization of a RUNNING
task is not really meaningful to properly support scheduler decisions.

For all these reasons, a more stable signal can do a better job of
representing the expected/estimated utilization of a task/cfs_rq.
Such a signal can be easily created on top of PELT by still using it as
an estimator which produces values to be aggregated on meaningful
events.

This patch adds a simple implementation of util_est, a new signal built on
top of PELT's util_avg where:

    util_est(task) = max(task::util_avg, f(task::util_avg@dequeue))

This allows to remember how big a task has been reported by PELT in its
previous activations via f(task::util_avg@dequeue), which is the new
_task_util_est(struct task_struct*) function added by this patch.

If a task should change its behavior and it runs longer in a new
activation, after a certain time its util_est will just track the
original PELT signal (i.e. task::util_avg).

The estimated utilization of cfs_rq is defined only for root ones.
That's because the only sensible consumer of this signal are the
scheduler and schedutil when looking for the overall CPU utilization
due to FAIR tasks.

For this reason, the estimated utilization of a root cfs_rq is simply
defined as:

    util_est(cfs_rq) = max(cfs_rq::util_avg, cfs_rq::util_est::enqueued)

where:

    cfs_rq::util_est::enqueued = sum(_task_util_est(task))
                                 for each RUNNABLE task on that root cfs_rq

It's worth noting that the estimated utilization is tracked only for
objects of interests, specifically:

 - Tasks: to better support tasks placement decisions
 - root cfs_rqs: to better support both tasks placement decisions as
                 well as frequencies selection
Signed-off-by: NPatrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NDietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@android.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: http://lkml.kernel.org/r/20180309095245.11071-2-patrick.bellasi@arm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

It's unused:

  $ git grep "\<TASK_ALL\>" | wc -l
  1

... and it is also dangerous, kill the bugger.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180227160510.10829-1-bigeasy@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

There are several functions that do find_task_by_vpid() followed by
get_task_struct().  We can use a helper function instead.

Link: http://lkml.kernel.org/r/1509602027-11337-1-git-send-email-rppt@linux.vnet.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The select_idle_sibling() (SIS) rewrite in commit:

  10e2f1ac ("sched/core: Rewrite and improve select_idle_siblings()")

... replaced a domain iteration with a search that broadly speaking
does a wrapped walk of the scheduler domain sharing a last-level-cache.

While this had a number of improvements, one consequence is that two tasks
that share a waker/wakee relationship push each other around a socket. Even
though two tasks may be active, all cores are evenly used. This is great from
a search perspective and spreads a load across individual cores, but it has
adverse consequences for cpufreq. As each CPU has relatively low utilisation,
cpufreq may decide the utilisation is too low to used a higher P-state and
overall computation throughput suffers.

While individual cpufreq and cpuidle drivers may compensate by artifically
boosting P-state (at c0) or avoiding lower C-states (during idle), it does
not help if hardware-based cpufreq (e.g. HWP) is used.

This patch tracks a recently used CPU based on what CPU a task was running
on when it last was a waker a CPU it was recently using when a task is a
wakee. During SIS, the recently used CPU is used as a target if it's still
allowed by the task and is idle.

The benefit may be non-obvious so consider an example of two tasks
communicating back and forth. Task A may be an application doing IO where
task B is a kworker or kthread like journald. Task A may issue IO, wake
B and B wakes up A on completion.  With the existing scheme this may look
like the following (potentially different IDs if SMT is in use but similar
principal applies).

 A (cpu 0)	wake	B (wakes on cpu 1)
 B (cpu 1)	wake	A (wakes on cpu 2)
 A (cpu 2)	wake	B (wakes on cpu 3)
 etc.

A careful reader may wonder why CPU 0 was not idle when B wakes A the
first time and it's simply due to the fact that A can be rescheduled to
another CPU and the pattern is that prev == target when B tries to wakeup A
and the information about CPU 0 has been lost.

With this patch, the pattern is more likely to be:

 A (cpu 0)	wake	B (wakes on cpu 1)
 B (cpu 1)	wake	A (wakes on cpu 0)
 A (cpu 0)	wake	B (wakes on cpu 1)
 etc

i.e. two communicating casts are more likely to use just two cores instead
of all available cores sharing a LLC.

The most dramatic speedup was noticed on dbench using the XFS filesystem on
UMA as clients interact heavily with workqueues in that configuration. Note
that a similar speedup is not observed on ext4 as the wakeup pattern
is different:

                          4.15.0-rc9             4.15.0-rc9
                           waprev-v1        biasancestor-v1
 Hmean      1      287.54 (   0.00%)      817.01 ( 184.14%)
 Hmean      2     1268.12 (   0.00%)     1781.24 (  40.46%)
 Hmean      4     1739.68 (   0.00%)     1594.47 (  -8.35%)
 Hmean      8     2464.12 (   0.00%)     2479.56 (   0.63%)
 Hmean     64     1455.57 (   0.00%)     1434.68 (  -1.44%)

The results can be less dramatic on NUMA where automatic balancing interferes
with the test. It's also known that network benchmarks running on localhost
also benefit quite a bit from this patch (roughly 10% on netperf RR for UDP
and TCP depending on the machine). Hackbench also seens small improvements
(6-11% depending on machine and thread count). The facebook schbench was also
tested but in most cases showed little or no different to wakeup latencies.
Signed-off-by: NMel Gorman <mgorman@techsingularity.net>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180130104555.4125-5-mgorman@techsingularity.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

Worker kthread needs to be able to change frequency for all other
threads.

Make it special, just under STOP class.
Signed-off-by: NJuri Lelli <juri.lelli@arm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Claudio Scordino <claudio@evidence.eu.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luca Abeni <luca.abeni@santannapisa.it>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: alessio.balsini@arm.com
Cc: bristot@redhat.com
Cc: dietmar.eggemann@arm.com
Cc: joelaf@google.com
Cc: juri.lelli@redhat.com
Cc: mathieu.poirier@linaro.org
Cc: morten.rasmussen@arm.com
Cc: patrick.bellasi@arm.com
Cc: rjw@rjwysocki.net
Cc: rostedt@goodmis.org
Cc: tkjos@android.com
Cc: tommaso.cucinotta@santannapisa.it
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/20171204102325.5110-4-juri.lelli@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patch adds the possibility of getting the delivery of a SIGXCPU
signal whenever there is a runtime overrun. The request is done through
the sched_flags field within the sched_attr structure.

Forward port of https://lkml.org/lkml/2009/10/16/170Tested-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: NJuri Lelli <juri.lelli@gmail.com>
Signed-off-by: NClaudio Scordino <claudio@evidence.eu.com>
Signed-off-by: NLuca Abeni <luca.abeni@santannapisa.it>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tommaso Cucinotta <tommaso.cucinotta@sssup.it>
Link: http://lkml.kernel.org/r/1513077024-25461-1-git-send-email-claudio@evidence.eu.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Construct the init thread stack in the linker script rather than doing it
by means of a union so that ia64's init_task.c can be got rid of.

The following symbols are then made available from INIT_TASK_DATA() linker
script macro:

	init_thread_union
	init_stack

INIT_TASK_DATA() also expands the region to THREAD_SIZE to accommodate the
size of the init stack.  init_thread_union is given its own section so that
it can be placed into the stack space in the right order.  I'm assuming
that the ia64 ordering is correct and that the task_struct is first and the
thread_info second.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-by: NTony Luck <tony.luck@intel.com>
Tested-by: Will Deacon <will.deacon@arm.com> (arm64)
Tested-by: NPalmer Dabbelt <palmer@sifive.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>

gcc-8 warns about using strncpy() with the source size as the limit:

  fs/exec.c:1223:32: error: argument to 'sizeof' in 'strncpy' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]

This is indeed slightly suspicious, as it protects us from source
arguments without NUL-termination, but does not guarantee that the
destination is terminated.

This keeps the strncpy() to ensure we have properly padded target
buffer, but ensures that we use the correct length, by passing the
actual length of the destination buffer as well as adding a build-time
check to ensure it is exactly TASK_COMM_LEN.

There are only 23 callsites which I all reviewed to ensure this is
currently the case.  We could get away with doing only the check or
passing the right length, but it doesn't hurt to do both.

Link: http://lkml.kernel.org/r/20171205151724.1764896-1-arnd@arndb.deSigned-off-by: NArnd Bergmann <arnd@arndb.de>
Suggested-by: NKees Cook <keescook@chromium.org>
Acked-by: NKees Cook <keescook@chromium.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Aleksa Sarai <asarai@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This code (CONFIG_LOCKDEP_CROSSRELEASE=y and CONFIG_LOCKDEP_COMPLETIONS=y),
while it found a number of old bugs initially, was also causing too many
false positives that caused people to disable lockdep - which is arguably
a worse overall outcome.

If we disable cross-release by default but keep the code upstream then
in practice the most likely outcome is that we'll allow the situation
to degrade gradually, by allowing entropy to introduce more and more
false positives, until it overwhelms maintenance capacity.

Another bad side effect was that people were trying to work around
the false positives by uglifying/complicating unrelated code. There's
a marked difference between annotating locking operations and
uglifying good code just due to bad lock debugging code ...

This gradual decrease in quality happened to a number of debugging
facilities in the kernel, and lockdep is pretty complex already,
so we cannot risk this outcome.

Either cross-release checking can be done right with no false positives,
or it should not be included in the upstream kernel.

( Note that it might make sense to maintain it out of tree and go through
  the false positives every now and then and see whether new bugs were
  introduced. )

Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

It doesn't cause a run-time bug, but these bitfields should be unsigned.
When it's signed ->dl_throttled is set to either 0 or -1, instead of
0 and 1 as expected.

The sched.h file is included into tons of places so Sparse generates
a flood of warnings like this:

  ./include/linux/sched.h:477:54: error: dubious one-bit signed bitfield
Reported-by: NMatthew Wilcox <willy@infradead.org>
Reported-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NLuca Abeni <luca.abeni@santannapisa.it>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-janitors@vger.kernel.org
Cc: luca abeni <luca.abeni@santannapisa.it>
Link: http://lkml.kernel.org/r/20171013070121.dzcncojuj2f4utij@mwandaSigned-off-by: NIngo Molnar <mingo@kernel.org>

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We want to centralize the isolation features, to be done by the housekeeping
subsystem and scheduler domain isolation is a significant part of it.

No intended behaviour change, we just reuse the housekeeping cpumask
and core code.
Signed-off-by: NFrederic Weisbecker <frederic@kernel.org>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1509072159-31808-11-git-send-email-frederic@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Ask the compiler to use a single bit for storing true / false values,
instead of wasting the size of a whole int value.
Tested with gcc 5.4.0 on x86_64, and the compiler produces the expected
Assembly (similar to the Assembly code generated when explicitly accessing
the bits with bitmasks, "&" and "|").
Signed-off-by: Nluca abeni <luca.abeni@santannapisa.it>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NDaniel Bristot de Oliveira <bristot@redhat.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504778971-13573-5-git-send-email-luca.abeni@santannapisa.itSigned-off-by: NIngo Molnar <mingo@kernel.org>

Steve requested better names for the new task-state helper functions.

So introduce the concept of task-state index for the printing and
rename __get_task_state() to task_state_index() and
__task_state_to_char() to task_index_to_char().
Requested-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170929115016.pzlqc7ss3ccystyg@hirez.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

The load balancer uses runnable_load_avg as load indicator. For
!cgroup this is:

  runnable_load_avg = \Sum se->avg.load_avg ; where se->on_rq

That is, a direct sum of all runnable tasks on that runqueue. As
opposed to load_avg, which is a sum of all tasks on the runqueue,
which includes a blocked component.

However, in the cgroup case, this comes apart since the group entities
are always runnable, even if most of their constituent entities are
blocked.

Therefore introduce a runnable_weight which for task entities is the
same as the regular weight, but for group entities is a fraction of
the entity weight and represents the runnable part of the group
runqueue.

Then propagate this load through the PELT hierarchy to arrive at an
effective runnable load avgerage -- which we should not confuse with
the canonical runnable load average.
Suggested-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Currently TASK_PARKED is masqueraded as TASK_INTERRUPTIBLE, give it
its own print state because it will not in fact get woken by regular
wakeups and is a long-term state.

This requires moving TASK_PARKED into the TASK_REPORT mask, and since
that latter needs to be a contiguous bitmask, we need to shuffle the
bits around a bit.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Markus reported that kthreads that idle using TASK_IDLE instead of
TASK_INTERRUPTIBLE are reported in as TASK_UNINTERRUPTIBLE and things
like htop mark those red.

This is undesirable, so add an explicit state for TASK_IDLE.
Reported-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Remove yet another task-state char instance.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>