Properly configure blending properties of given hardware layer based on
the selected pixel format. Currently only per-pixel-based alpha is possible
when respective pixel format has been selected. Configuration of global,
per-plane alpha value, color key and background color will be added later.

This patch is heavily inspired by earlier work done by Tobias Jakobi
<tjakobi@math.uni-bielefeld.de>.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Previously blending setup was static and most of it was
done in mixer_win_reset().
Signed-off-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

'zpos' plane property is configurable, so adjust hardware layers
priority based on the zpos value. 'zpos' value shifted by one can be
used directly as hw priority value and stored to the registers, because
mixer accepts priority values from 1 to 15 (0 means that layer is
disabled).

This patch also changes the default layer priority to match already
exposed initial zpos values. The initial configuration is now:
[top] video > gfx layer1 > gfx layer0 [bottom].
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch adds all infrastructure to make zpos plane property
configurable from userspace.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch renames zpos entry to index, because in most places it is
used as index for selecting hardware layer/window instead of
configurable layer position. This will later enable to make the zpos
property configurable.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Fixes: 1e4854e9 ("drm/amdgpu/powerplay: implement thermal control for tonga.")
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NDave Airlie <airlied@redhat.com>

- gk20a instmem fixes / improvements
- more gm10x vs gm20x differences deal with
- better support for high-frequency hdmi modes
- pstate control interfaces moved to debugfs
- support for pcie link speed changes
- misc other fixes across the board

* 'linux-4.5' of git://github.com/skeggsb/linux: (50 commits)
  drm/nouveau/pmu: prevent falcon from acking interrupts routed to the host
  drm/nouveau/perf: change pcie speed on pstate change
  drm/nouveau/perf: add fields for pci speed and width and use it for the pstates
  drm/nouveau/bios/perf: parse the pci speed from the bios for tesla and newer cards
  drm/nouveau/pci: implement pcie speed change for kepler+
  drm/nouveau/pci: implement pcie speed change for Fermi
  drm/nouveau/pci: implement pcie speed change for tesla
  drm/nouveau/pci: implement generic code for pcie speed change
  drm/nouveau/pci: add gk104 variant
  drm/nouveau/pci: add gf106 variant
  drm/nouveau/kms: take mode_config mutex in connector hotplug path
  drm/nouveau/nouveau/perfmon: add interface files for current core voltage
  drm/nouveau/sysfs: remove pstate interface
  drm/nouveau/debugfs: add copy of sysfs pstate interface ported to debugfs
  drm/nouveau/debugfs: we need a ctrl object for debugfs
  drm/nouveau/debugfs: rename functions to indicate they are used inside drm
  drm/nouveau/debugfs: add infrastructure to add files with other fops than only read
  drm/nouveau/fifo/gf100: remove references to "daemon"
  drm/nouveau/fb/nv50: remove references to "daemon"
  drm/nouveau/clk: remove references to "daemon"
  ...

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

v2: remove error and only set link for pcie devices
v6: remove check for pcie device
Signed-off-by: NKarol Herbst <nouveau@karolherbst.de>

Signed-off-by: NKarol Herbst <nouveau@karolherbst.de>

Signed-off-by: NKarol Herbst <nouveau@karolherbst.de>

v2: rename functions
v3: remove pcie2 accessors
v6: fix alignement and line width, also remove useless code
Signed-off-by: NKarol Herbst <nouveau@karolherbst.de>

v5: don't set kepler func pointers
v6: fix alignment and line length

v5: don't set fermi or kepler func pointers
v6: fix alignment

v2: rename and group functions
v4: change copyright information
    move printing of pcie speeds into oneinit,
    rename all pcie functions to nvkm_pcie_*
    don't try to raise the pcie version when no higher one is supported
v5: revert Copyright changes and rename nvkm_pcie_raise_version to nvkm_pcie_set_version
v6: remove some useless pci_is_pcie checks and rework messages
Signed-off-by: NKarol Herbst <nouveau@karolherbst.de>

v2: change email used in header
v4: change Copyright information
v5: revert Copyright changes
Signed-off-by: NKarol Herbst <nouveau@karolherbst.de>

v2: change email used in header
v4: change Copyright information
v5: revert Copyright changes
Signed-off-by: NKarol Herbst <nouveau@karolherbst.de>

fdo#93634
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

Signed-off-by: NKarol Herbst <nouveau@karolherbst.de>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NKarol Herbst <nouveau@karolherbst.de>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NKarol Herbst <nouveau@karolherbst.de>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NKarol Herbst <nouveau@karolherbst.de>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

We will need our own debugfs_init and cleanup functions, because
nouveau_drm isn't ready while the DRM ones are called by DRM.
Signed-off-by: NKarol Herbst <nouveau@karolherbst.de>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

v2: use the same object for private data as with the drm debugfs functions
Signed-off-by: NKarol Herbst <nouveau@karolherbst.de>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

From DCB 4.1 spec.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Differences from GM10x:
- GM20x LTC count detection differs from GM10x
- GM20x init doesn't require large page size setting
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

resman and nvgpu both do this, presumably for good reason.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

GM20x doesn't require the priv ring timeout bumps that GK/GM10x have.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>