- 05 6月, 2009 40 次提交
-
-
由 Mike Rapoport 提交于
Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Mike Rapoport 提交于
Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Mike Rapoport 提交于
Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Mike Rapoport 提交于
Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Mike Rapoport 提交于
CM-X300 can be assembled with different NAND flashes from different manufacturers. Adding their configuration to the kernel is impractical, therefore we will use the default NAND controller settings set up by the bootloader. Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Mike Rapoport 提交于
Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Mike Rapoport 提交于
Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Mike Rapoport 提交于
Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Mike Rapoport 提交于
Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Mike Rapoport 提交于
Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Antonio Ospite 提交于
Setup gpio-keys for EzX phones Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it> Acked-by: NDaniel Ribeiro <drwyrm@gmail.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Dmitry Eremin-Solenikov 提交于
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Jonathan Cameron 提交于
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Jonathan Cameron 提交于
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Jonathan Cameron 提交于
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Jonathan Cameron 提交于
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Jonathan Cameron 提交于
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Marek Vasut 提交于
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Dmitry Eremin-Solenikov 提交于
Add a call to pxa_set_ac97_info() to enable the audio support. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Dmitry Eremin-Solenikov 提交于
csb726 used obsolete and not working out-of-tree driver smc911x. Switch it to use new smsc911x driver. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Philipp Zabel 提交于
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Philipp Zabel 提交于
I'm not going to maintain separate defconfigs for magician and hx4700. This should probably be renamed to htcpxa_defconfig. Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Philipp Zabel 提交于
This includes - IrDA (pxafixp_ir), - Buttons (gpio-keys), - ASIC3 IRQ/GPIOs (asic3), - EGPIOs (htc-egpio), - ATI Imageon w3220 framebuffer (w100fb), - Backlight (pwm-backlight), - StrataFlash (physmap), - Battery monitor (ds1wm,w1_ds2760,ds2760_battery) - USB gadget support (pxa27x_udc,gpio_vbus). - bq24022 battery charger (pda_power,bq24022) - TSC2046 touchscreen (ads7846) Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Philipp Zabel 提交于
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Philipp Zabel 提交于
Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Robert Jarzmik 提交于
Add voltage regulation capability to pxa2xx cpufreq driver. The cpufreq will ask for a "vcc_core" regulator to the regulator framework. If a regulator is found at probe time, it will be used with values specified in PXA270 Electrical, Mechanical, and Thermal Specifications. If not, it will be assumed for now that frequency change will work without voltage control. This assumes that the IPL/SPL installs sane values to an existing voltage regulator (ie. voltage high enough to support the full range). Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Jürgen Schindele 提交于
Signed-off-by: NJürgen Schindele <linux@schindele.name> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
由 Mike Rapoport 提交于
PXA processors have several low-power modes. Currently kernel supports only one of these modes for PM_SUSPEND_MEM. This patch adds ability to set desired suspend mode for PXA27x based machines. Signed-off-by: NMike Rapoport <mike@compulab.co.il> Reviewed-by: NRussell King <linux@arm.linux.org.uk> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Robert Jarzmik 提交于
As reported by Aric Blumer, the pxa27x_udc driver does work with pxa3xx devices. Add support into device files. Reported-by: NAric Blumer <aric@sdgsystems.com> Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: NMatt Reimer <mattjreimer@gmail.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Philipp Zabel 提交于
The default value is 16 IRQs. Zylonite needs 32, ASIC3 based boards need 70. My problem is still that due to the way IRQ_GPIO is hardcoded, ASIC3 based boards need 70 IRQs starting at IRQ_BOARD_START. If I define ASIC3 IRQs similar to LoCoMo or SA1111, things break as soon as something selects PXA_HAVE_BOARD_IRQS. Increasing the default number of board IRQs to 70 instead doesn't seem very nice. Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Mike Rapoport 提交于
Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Eric Miao 提交于
Signed-off-by: NMingwei Wang <mingwei.wang@marvell.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Eric Miao 提交于
Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Eric Miao 提交于
Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Eric Miao 提交于
The PXA_PWM config option is really redundant since the introduction of HAVE_PWM, replace that with HAVE_PWM to avoid confusion. Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Eric Miao 提交于
PWMs on PXA168/910 start at number 1 instead of 0, (i.e. PWM1/2/3/4 instead of PWM0/1/2/3 on PXA25x/PXA27x/PXA3xx). Allow this number to be specified in pwm_id_table. Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Eric Miao 提交于
Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
由 Eric Miao 提交于
Signed-off-by: NPaul Shen <paul.shen@marvell.com> Signed-off-by: NEric Miao <eric.miao@marvell.com>
-