- 07 1月, 2015 2 次提交
-
-
由 Anjali Singhai 提交于
The Rx port checksum error counter was incrementing incorrectly with UDP encapsulated tunneled traffic. This patch fixes the problem so that the port_rx_csum counter will show accurate statistics. Signed-off-by: NAnjali Singhai <anjali.singhai@intel.com> Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NJim Young <james.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
When the driver was polling with interrupts disabled the hardware will occasionally not write back descriptors. This patch causes the driver to detect this situation and force an interrupt to fire which will flush the stuck descriptor. Does not conflict with napi because if we are already polling the napi_schedule is ignored. Additionally the extra interrupts are rate limited, so don't cause a burden to the CPU. Change-ID: Iba4616d2a71288672a5f08e4512e2704b97335e8 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 01 1月, 2015 3 次提交
-
-
由 Joe Perches 提交于
I didn't notice that return in the code, fix it by adding a goto out instead to free the memory. Fixes: > New smatch warnings: > drivers/net/ethernet/intel/i40e/i40e_debugfs.c:832 i40e_dbg_dump_desc() warn: possible memory leak of 'ring' Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NJoe Perches <joe@perches.com> Tested-by: NJim Young <james.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Todd Fujinaka 提交于
Remove a FIXME comment that was missed in a commit on 1/2007. Signed-off-by: NTodd Fujinaka <todd.fujinaka@intel.com> Reported-by: Nnick <xerofoify@gmail.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 John W. Linville 提交于
Although it doesn't explicitly say so, commit 60ffa478 ("e100: Fix MDIO/MDIO-X") appears to be intended to revert the earlier commit 64895145 ("e100: fixed e100 MDI/MDI-X issues"). However, careful examination reveals that the attempted revert actually _inverted_ the test for eeprom_mdix_enabled. That is bound to program a few PHYs incorrectly... https://bugzilla.redhat.com/show_bug.cgi?id=1156417Signed-off-by: N"John W. Linville" <linville@tuxdriver.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 17 12月, 2014 1 次提交
-
-
由 Or Gerlitz 提交于
The current implementations all use dev_uc_add_excl() and such whose API doesn't support vlans, so we can't make it with NICs HW for now. Fixes: f6f6424b ('net: make vid as a parameter for ndo_fdb_add/ndo_fdb_del') Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NJiri Pirko <jiri@resnulli.us> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 12月, 2014 1 次提交
-
-
由 Alexander Duyck 提交于
This change makes it so that dma_rmb is used when reading the Rx descriptor. The advantage of dma_rmb is that it allows for a much lower cost barrier on x86, powerpc, arm, and arm64 architectures than a traditional memory barrier when dealing with reads that only have to synchronize to coherent memory. In addition I have updated the code so that it just checks to see if any bits have been set instead of just the DD bit since the DD bit will always be set as a part of a descriptor write-back so we just need to check for a non-zero value being present at that memory location rather than just checking for any specific bit. This allows the code itself to appear much cleaner and allows the compiler more room to optimize. Cc: Matthew Vick <matthew.vick@intel.com> Cc: Don Skidmore <donald.c.skidmore@intel.com> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 12月, 2014 1 次提交
-
-
由 Alexander Duyck 提交于
This change replaces calls to netdev_alloc_skb_ip_align with napi_alloc_skb. The advantage of napi_alloc_skb is currently the fact that the page allocation doesn't make use of any irq disable calls. There are few spots where I couldn't replace the calls as the buffer allocation routine is called as a part of init which is outside of the softirq context. Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 12月, 2014 13 次提交
-
-
由 Jeff Kirsher 提交于
Inline functions are preferred over macros when they can be used interchangeably. CC: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reported-by: NJoe Perches <joe@perches.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Add a little more state context to an NVM update debug message. Change-ID: I512160259052bcdbe5bdf1adf403ab2bf7984970 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Acked-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Decoding the AQ return code is great except when the AQ send timed out and there's no return code set. This changes the handy decoder interface to help catch and properly report the condition as a useful errno rather than returning a misleading '0'. Change-ID: I07a1f94f921606da49ffac7837bcdc37cd8222eb Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Acked-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Only poll on the NVM semaphore if there's time left on a previous reservation. Also, add a little more info to debug messages. Change-ID: I2439bf870b95a28b810dcb5cca1c06440463cf8a Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Acked-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
The state transitions after an error were not managed well, so these changes get us back to the INIT state or don't transition out of the INIT state after most errors. Change-ID: I90aa0e4e348dc4f58cbcdce9c5d4b7fd35981c6c Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Acked-by: NMichal Kosiarz <michal.kosiarz@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Don't bother trying to set a smaller timeout on the polling, just simplify the code and always use the max limit. Also, rename a variable for clarity and fix a comment. Change-ID: I0300c3562ccc4fd5fa3088f8ae52db0c1eb33af5 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Acked-by: NMichal Kosiarz <michal.kosiarz@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
The nvm_semaphore_wait field is set but never used, so let's just get rid of it. Change-ID: I2107bd29b69f99b1a61d7591d087429527c9d8fa Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Acked-by: NMichal Kosiarz <michal.kosiarz@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
The adminq init is run after the EMPR that is triggered by the NVM update. The final write command will cause the reset and will want to wait for the ARQ event that signals the end of the update, but the reset precludes the event being sent. The state is probably already at INIT, but we set it so here anyway, and clear the release_on_done flag as well. Change-ID: Ie9d724a39e71f988741abc3d51b4cb198c7e0272 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Acked-by: NMichal Kosiarz <michal.kosiarz@intel.com> Acked-by: NKamil Krawczyk <kamil.krawczyk@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Just to be sure, add a range check to avoid any possible array index-out-of-bound issues. CC: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Change-ID: I9323bee6732c2a47599816e1d6c6b3a1f8dcbf54 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Acked-by: NMichal Kosiarz <michal.kosiarz@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Rework the debug messages in the NVM update state machine so that we can turn them on and off dynamically rather than forcing a recompile/reload. These can now be turned on with something like: ethtool -s eth1 msglvl 0xf000008f and off with: ethtool -s eth1 msglvl 0xf000000f The high 0xf0000000 gets the driver's attention that we want to change the internal debug flags, and the 0x80 bit is the NVM debug. Change-ID: I5efb9039400304b29a0fd6ddea3f47bb362e6661 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Acked-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
The NVM update operations take time finish asynchronously, and follow-on update requests need to wait for the current one to finish. Early firmware didn't handle this well, so the code had to track the busy state. The released firmware handles the busy state correctly, returning I40E_AQ_RC_EBUSY if an update is still in progress, so the code no longer needs to track this. Change-ID: I6e6b4adc26d6dcc5fd7adfee5763423858a7d921 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Acked-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Add more detail to the NVM update error messages so folks have a better chance at diagnosing issues without having to resort to heroic measures to reproduce an issue. Change-ID: I270d1a9c903baceaef0bebcc55d29108ac08b0bd Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Once in a great while the NVMUpdate tools and the driver get out of phase with each other. This gives us a way to reset things without having to unload the driver. Change-ID: I353f688236249a666a90ba3e7233e0ed8c1a04e9 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 09 12月, 2014 2 次提交
-
-
由 Eyal Perry 提交于
This patch extends the set/get_rxfh ethtool-options for getting or setting the RSS hash function. It modifies drivers implementation of set/get_rxfh accordingly. This change also delegates the responsibility of checking whether a modification to a certain RX flow hash parameter is supported to the driver implementation of set_rxfh. User-kernel API is done through the new hfunc bitmask field in the ethtool_rxfh struct. A bit set in the hfunc field is corresponding to an index in the new string-set ETH_SS_RSS_HASH_FUNCS. Got approval from most of the relevant driver maintainers that their driver is using Toeplitz, and for the few that didn't answered, also assumed it is Toeplitz. Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Ariel Elior <ariel.elior@qlogic.com> Cc: Prashant Sreedharan <prashant@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Cc: Hariprasad S <hariprasad@chelsio.com> Cc: Sathya Perla <sathya.perla@emulex.com> Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com> Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: Carolyn Wyborny <carolyn.wyborny@intel.com> Cc: Don Skidmore <donald.c.skidmore@intel.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Matthew Vick <matthew.vick@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Mitch Williams <mitch.a.williams@intel.com> Cc: Amir Vadai <amirv@mellanox.com> Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com> Cc: Shradha Shah <sshah@solarflare.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: "VMware, Inc." <pv-drivers@vmware.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: NEyal Perry <eyalpe@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
Update the Intel Ethernet drivers to use eth_skb_pad() and skb_put_padto instead of doing their own implementations of the function. Also this cleans up two other spots where skb_pad was called but the length and tail pointers were being manipulated directly instead of just having the padding length added via __skb_put. Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 12月, 2014 17 次提交
-
-
由 Joe Perches 提交于
Reduce stack use by using kmemdup and not using a very large struct on stack. In function ‘i40e_dbg_dump_desc’: warning: the frame size of 8192 bytes is larger than 2048 bytes [-Wframe-larger-than=] Signed-off-by: NJoe Perches <joe@perches.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Catherine Sullivan 提交于
Bump version. Change-ID: I4264e81dcfb57ec46a3ede54b0a6cb25b497d3cb Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Getting the pf_id from the function number was a good place to start, but when the PF was setup in passthru mode, the PCI bus/device/function was virtualized and the number in the VM is different from the number in the bare metal. This caused HW configuration issues when the wrong pf_id was used to set up the HMC and other structures. The PF_FUNC_RID register has the real bus/device/function information as configured by the BIOS, so use that for a better number. This works in NPAR mode as well. Change-ID: I65e3dd6c97594890c2bad566b83cc670b1dae534 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Acked-by: NGreg Rose <gregory.v.rose@intel.com> Acked-by: NKevin Scott <kevin.c.scott@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
The ARQ needs to have at least as many entries as VFs, or the VFs will get errors from the FW when they send messages to the PF. Since we don't know how many VFs we'll end up with, just set up 128 descriptors. Change-ID: I04ae3d1c7faf09110eb782214e9c05aeb62a6c59 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
There is an order in which this should happen. It turns out that FW will not let you change the Loopback setting of the VSI with update VSI prior to the VEB creation. Change-ID: I7614ddff8b4c37702930c02f16f8c346aaa64bd1 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
All VSIs on a VEB should either have loopback enabled or disabled, a mixed mode is not supported for a VEB. Since our driver supports multiple VSIs per PF that need to talk to each other make sure to enable Loopback for the PF and FDIR VSI as well. Also, we now have to explicitly enable Loopback mode otherwise we fail VSI creation for VMDq and VF VSIs. Change-ID: Ib68c3ea4aeb730ac9468f930610de456efbe5b20 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Kevin Scott 提交于
Increase reset delay to ensure all internal caches are properly flushed in worst case scenario. Change-ID: I6f059a9e024fbf9ef1debd32497eed21369957fc Signed-off-by: NKevin Scott <kevin.c.scott@intel.com> Acked-by: NShannon Nelson <shannon.nelson@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
When multiple VFs attempt to initialize simultaneously, the firmware may delay or drop messages. Make the init code more adept at handling these situations by a) reinitializing the admin queue if the firmware fails to process a request, and b) resending a request if the PF doesn't answer. Once the request has been sent again, the PF might end up getting both requests and send the configuration information to the driver twice. This will cause the VF to complain about receiving an unexpected message from the PF. Since this is not fatal, reduce the warning level of the log messages that are generated in response to this event. Change-ID: I9370a1a2fde2ad3934fa25ccfd0545edfbbb4805 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
The old xxx_NETDEV_STAT() macro was defined long before the newer rtnl_link_stats64 came into being, and just never got updated. Since we're using rtnl_link_stats64 in other parts of the driver, we should use it here as well. We've just been lucky that the field definitions are the same sizes. Change-ID: I19fc71619905700235dcdf0d3c8153aec81d36de Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
This patch is useful for future expansion when new VF MAC types get added. It helps with cleaning up VF driver flow. Change-ID: Ibe1eeb71262a3a40f24a1c5409436bdc3411da7f Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Acked-by: NShannon Nelson <shannon.nelson@intel.com> Acked-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
Add the Virtual Channel OP event opcode for CONFIG_RSS, so that the Virtual Channel state machine can properly decipher status change events. Change-ID: I09939c7aa380147f60c49fd01ef2e27d0dc1c299 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Acked-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jacob Keller 提交于
Resolve an issue related to images with multiple PFs per physical port. We cannot fully support 1588 PTP features, since only one port should control (ie: write) the registers at a time. Doing so can cause interference of functionality. It may be possible to partially implement the API for only those features without side effects. However, this at minimum means non controlling PFs lose Tx timestamps, frequency atunement, and possibly SYSTIME adjustment. There may be further impact I did not discover. Since the API in the kernel expects these features to work, it is simpler and less dangerous to just disable PTP features on all PFs not identified as the controlling PF in PRTTSYN_CTL0.PF_ID. This change also removes the warning printed when hwtstaml IOCTL is called on the wrong PF. This is actually meaningless now, since only one PF per port will support it. In addition, the ethtool get_ts_info IOCTL was updated so that only the controlling port will even indicate support (so as not to confuse users). The overall downside is complete loss of functionality on non controlling PF, vs the possible gain of partial support. The biggest factor for choosing this approach is simplicity and ensuring that the main PF will work. There could easily be other portions of the 1588 logic with side effects I am not aware, and the reduced functionality that might be made available is significantly less useful. In addition, the API does not allow for proper indication of why particular features are not supported. These reasons are enough to decide for the simpler approach to resolving this issue. Change-ID: If4696bae686fc18aef6552b67dd417213d987c16 Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This patch adds additional text description for base pf0 and flow director generated interrupts. Without this patch, these interrupts are difficult to distinguish per port on a multi-function device. Change-ID: I4662e1b38840757765a3fe63d90219d28e76bfab Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Use the 'i' rather than the more restrictive 'x' or 'd' in the aq_cmd arguments. This makes the user interface much more forgiving and user friendly. Change-ID: I5dcd57b9befc047e06b74cf1152a25a3fa9e1309 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
This message really doesn't give any useful information and ends up getting printed every service_task loop in the Linux driver, filling the logfile with noise when AQ tracing is enabled. This patch simply removes the noise. Change-ID: I30ad51e6b03c7ad12a7d9c102def0087db622df3 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Acked-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
This case statement is empty and the fall through just breaks out so remove the break and let it fall through to break out. Change-ID: I1b5ba9870d5245ca80bfca6e7f5f089e2eb8ccb0 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Emil Tantilov 提交于
This patch resolves couple of issues in ixgbevf_probe/remove(): 1. Fix a case where adapter->state is tested after free_netdev() this is same as the patch for ixgbe from Daniel Borkmann <dborkman@redhat.com>: commit b5b2ffc0 ("ixgbe: fix use after free adapter->state test in ixgbe_remove/ixgbe_probe") 2. Move pci_set_drvdata() after all the error checks in ixgbevf_probe() and then add a check in ixgbevf_probe() to avoid running the cleanup functions twice in cases where probe failed. CC: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-