Argument 'trans' and 'root' are not used any more.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

commit d53ba474
(Btrfs: use commit root when loading free space cache) has remove
the deadlock check, and the related comments can be removed as well.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

If we start running low on metadata space we will try to allocate a chunk,
which could then try to allocate a chunk to add the device entry.  The thing
is we allocate a chunk before we try really hard to make the allocation, so
we should be able to find space for the device entry.  Add a flag to the
trans handle so we know we're currently allocating a chunk so we can just
bail out if we try to allocate another chunk.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Since we don't actually copy the extent information from the source tree in
the fast case we don't need to wait for ordered io to be completed in order
to fsync, we just need to wait for the io to be completed.  So when we're
logging our file just attach all of the ordered extents to the log, and then
when the log syncs just wait for IO_DONE on the ordered extents and then
write the super.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

This patch fixes the following problem:
- improper return value
- unnecessary read-only check
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Use wrapper page_offset to get byte-offset into filesystem object for page.
Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

We may try to flush some dirty pages when there is no enough space to reserve.
But it is possible that this operation fails, in order to get enough space to
reserve successfully, we will sync all the delalloc file. This operation is
safe, we needn't worry about the case that the filesystem goes from r/w to r/o.
because the filesystem should guarantee all the dirty pages have been written
into the disk after it becomes readonly, so the sync operation will do nothing
if the filesystem is already readonly. Though it may waste lots of time,
as a corner case, we needn't care.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Locking and unlocking delayed ref mutex are in the different functions,
and the name of lock functions is not uniform, so the readability is not
so good, this patch optimizes the lock logic and makes it more readable.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

We're running into having 50-100 orphans left over with xfstests 83
because of ENOSPC when trying to start the transaction for the inode update.
But in fact, it makes no sense in updating the inode for the new size while
we're deleting the stupid thing. This patch fixes this problem.
Reported-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

The delayed item commit code in several functions is similar, so
cleanup it.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Since we do not want to delay the async transaction commit, we should
use common work, not delayed work.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>

We clear the transaction object and the trans handle when they are about to be
freed, it is unnecessary, cleanup it.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>

The delayed reference allocation is in the fast path of the IO, so use slabs
to improve the speed of the allocation.

And besides that, it can do check for leaked objects when the module is removed.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>

btrfs_scan_one_device is calling set_blocksize() which can race
with a concurrent process making dirty page cache pages.  It can end up
dropping dirty page cache pages on the floor, which isn't very nice when
someone is just running btrfs dev scan to find filesystems on the
box.

Now that udev is registering btrfs devices as it discovers them, we can
actually end up racing with our own mkfs program too.  When this
happens, we drop some of the important blocks written by mkfs.

This commit changes scan_one_device to read the super out of the page
cache instead of trying to use bread.  This way we don't have to care
about the blocksize of the device.

This also drops the invalidate_bdev() call.  It wasn't very polite to
invalidate during the scan either.  mkfs is putting the super into the
page cache, there's no reason to invalidate at this point.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

When replaying a log tree with qgroups enabled, tree_mod_log_rewind does a
sanity-check of the number of items against the maximum possible number.
It calculates that number with the nodesize of fs_root. Unfortunately
fs_root is not yet set at this stage. So instead use the nodesize from
tree_root, which is already initialized.
Signed-off-by: NArne Jansen <sensille@gmx.net>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Dave Sterba triggered a lockdep complaint about lock ordering
between the sb_internal lock and the cleaner semaphore.

btrfs_lookup_dentry() checks for orphans if we're looking up
the inode for a subvolume, and subvolume creation is triggering
the lookup with a transaction running.

This commit moves the d_instantiate after the transaction closes.
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

When btrfs_qgroup_reserve returned a failure, we were missing a counter
operation for BTRFS_I(inode)->outstanding_extents++, leading to warning
messages about outstanding extents and space_info->bytes_may_use != 0.
Additionally, the error handling code didn't take into account that we
dropped the inode lock which might require more cleanup.

Luckily, all the cleanup code we need is already there and can be shared
with reserve_metadata_bytes, which is exactly what this patch does.
Reported-by: NLev Vainblat <lev@zadarastorage.com>
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

We specifically do not update the disk i_size if there are ordered extents
outstanding for any area between the current disk_i_size and our ordered
extent so that we do not expose stale data.  The problem is the check we
have only checks if the ordered extent starts at or after the current
disk_i_size, which doesn't take into account an ordered extent that starts
before the current disk_i_size and ends past the disk_i_size.  Fix this by
checking if the extent ends past the disk_i_size.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

If we have an ordered extent before the ordered extent we are currently
completing that is after the current disk_i_size we will put our i_size
update into that ordered extent so that we do not expose stale data.  The
problem is that if our disk i_size is updated past the previous ordered
extent we won't update the i_size with the pending i_size update.  So check
the pending i_size update and if its above the current disk i_size we need
to go ahead and try to update.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

While running snapshot testscript created by Mitch and David,
the race between autodefrag and snapshot deletion can lead to
corruption of dead_root list so that we can get crash on
btrfs_clean_old_snapshots().

And besides autodefrag, scrub also does the same thing, ie. read
root first and get inode.

Here is the story(take autodefrag as an example):
(1) when we delete a snapshot or subvolume, it will set its root's
refs to zero and do a iput() on its own inode, and if this inode happens
to be the only active in-meory one in root's inode rbtree, it will add
itself to the global dead_roots list for later cleanup.

(2) after (1), the autodefrag thread may read another inode for defrag
and the inode is just in the deleted snapshot/subvolume, but all of these
are without checking if the root is still valid(refs > 0).  So the end up
result is adding the deleted snapshot/subvolume's root to the global
dead_roots list AGAIN.

Fortunately, we already have a srcu lock to avoid the race, ie. subvol_srcu.

So all we need to do is to take the lock to protect 'read root and get inode',
since we synchronize to wait for the rcu grace period before adding something
to the global dead_roots list.
Reported-by: NMitch Harder <mitch.harder@sabayonlinux.org>
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

When we fail to start a transaction, we need to release the reserved free space
and qgroup space, fix it.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Reviewed-by: NJan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

If the checks at the beginning of btrfs_file_aio_write() fail, we needn't
decrease ->sync_writers, because we have not increased it. Fix it.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

You can run into this problem where if somebody is fsyncing and writing out
the existing extents you will have removed the extent map from the em tree,
but it's still valid for the current fsync so we go ahead and write it.  The
problem is we unconditionally try to merge it back into the em tree, but if
we've removed it from the em tree that will cause use after free problems.
Fix this to only merge if we are still a part of the tree.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

If we remove a missing device, bdev is null, and if we
send that off to btrfs_kobject_uevent we'll panic.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

btrfs_start_delalloc_inodes() locks the delalloc_inodes list, fetches the
first inode, unlocks the list, triggers btrfs_alloc_delalloc_work/
btrfs_queue_worker for this inode, and then it locks the list, checks the
head of the list again. But because we don't delete the first inode that it
deals with before, it will fetch the same inode. As a result, this function
allocates a huge amount of btrfs_delalloc_work structures, and OOM happens.

Fix this problem by splice this delalloc list.
Reported-by: NAlex Lyakas <alex.btrfs@zadarastorage.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

The max device number of single profile is 1, not 0 (0 means 'as many as
possible'). Fix it.

Cc: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

First, though the current transaction->aborted check can stop the commit early
and avoid unnecessary operations, it is too early, and some transaction handles
don't end, those handles may set transaction->aborted after the check.

Second, when we commit the transaction, we will wake up some worker threads to
flush the space cache and inode cache. Those threads also allocate some transaction
handles and may set transaction->aborted if some serious error happens.

So we need more check for ->aborted when committing the transaction. Fix it.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

We may access and update transaction->aborted on the different CPUs without
lock, so we need ACCESS_ONCE() wrapper to prevent the compiler from creating
unsolicited accesses and make sure we can get the right value.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

I noticed a WARN_ON going off when adding csums because we were going over
the amount of csum bytes that should have been allowed for an ordered
extent.  This is a leftover from when we used to hold the csums privately
for direct io, but now we use the normal ordered sum stuff so we need to
make sure and check if we've moved on to another extent so that the csums
are added to the right extent.  Without this we could end up with csums for
bytenrs that don't have extents to cover them yet.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

For compressed extents, the range of checksum is covered by disk length,
and the disk length is different with ram length, so we need to use disk
length instead to get us the right checksum.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

A user reported a BUG_ON(ret) that occured during tree log replay.  Ret was
-EAGAIN, so what I think happened is that we removed an extent that covered
a bitmap entry and an extent entry.  We remove the part from the bitmap and
return -EAGAIN and then search for the next piece we want to remove, which
happens to be an entire extent entry, so we just free the sucker and return.
The problem is ret is still set to -EAGAIN so we trip the BUG_ON().  The
user used btrfs-zero-log so I'm not 100% sure this is what happened so I've
added a WARN_ON() to catch the other possibility.  Thanks,
Reported-by: NJan Steffens <jan.steffens@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

We drop the extent map tree lock while we're logging extents, so somebody
could come in and merge another extent into this one and screw up our
logging, or they could even remove us from the list which would keep us from
logging the extent or freeing our ref on it, so we need to make sure to not
clear LOGGING until after the extent is logged, and then we can merge it to
adjacent extents.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Commit 3fed40cc ("Btrfs: cleanup duplicated division functions"), which
was merged into 3.8-rc1, has introduced a regression by removing logic
that was guarding us against bad user input.  Bring it back.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Merge branch 'for-chris' of git://git.kernel.org/pub/scm/linux/kernel/git/josef/btrfs-next into linus

Currently you can just destroy a qgroup even though it is in use by other qgroups
or has qgroups assigned to it. This patch prevents destruction of qgroups unless
they are completely unused. Otherwise destroy will return EBUSY.
Reported-by: NEric Hopper <hopper@omnifarious.org>
Signed-off-by: NArne Jansen <sensille@gmx.net>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

If a qgroup that has still assignments is deleted by the user, the corresponding
relations are left in the tree. This leads to an unmountable filesystem.
With this patch, those relations are simple ignored.
Reported-by: NEric Hopper <hopper@omnifarious.org>
Signed-off-by: NArne Jansen <sensille@gmx.net>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Operation-specific check (whether subvol is readonly or not) should go
after the mutual exclusiveness check.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Fix unlock order in btrfs_ioctl_rm_dev().
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>