When the multi input quirk is set, there is a new input device
created for every feature report. Since the idea is to present
features per hid device, not per input device, revert back to
the original report loop and change the feature_mapping() callback
to not take the input device as argument.
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Tested-by: NBenjamin Tissoires <benjmain.tissoires@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The Sixaxis does not want the report_id as part of the data packet in
Output reports, so we have to discard buf[0] when sending the actual
control message.

Add also some documentation about that and about why
hdev->hid_output_raw_report needs to be overridden.
Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The keyboard has several bugs in its report descriptor, most
importantly the Logical Min/Max are completely off.

Replace it with simplified descriptor which describes it properly.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add a new binary sysfs entry called report_descriptor which contains
the HID report descriptor.
Signed-off-by: NAlan Ott <alan@signal11.us>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

I already got some feedback for this module, telling me red and blue keys are
exchanged.  I checked it, and they are right. Due to my incorrect userspace
settings I missed this during my testing.
Signed-off-by: NChris Schlund <chrisschlund@gmx.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NChris Schlund <chrisschlund@gmx.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Setting of the return value of hidraw_read() uses the += operator when
= is more appropriate.  There is no case where ret can be anything
other than zero when the assignment is made, making = equivalent to
+= and much more clear.
Signed-off-by: NAlan Ott <alan@signal11.us>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

* amended Kconfig (PixCir and Hanvon are the same panel but with
  different name)
* insert field name in mt_class and retrieving it in mt_probe
* add 2 quirks: MT_QUIRK_VALID_IS_INRANGE, MT_QUIRK_VALID_IS_CONFIDENCE,
  in order to find the field "valid"
* inlined slot_is_contactid and slot_is_contact_number
* cosmetics changes (tabs and comments)
* do not send unnecessary properties once the touch is up
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This device used the MULTI_INPUT quirk whereas it could be used
with hid-mosart instead to support the multitouch part.

Reference: https://bugs.launchpad.net/ubuntu/+bug/620609/Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This device has been reported to be an hid-cando one.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Added support for the 'Sensing Win7-TwoFinger' panel by GeneralTouch found on some tablets.

Because of conflicting VID/PID, this conflicts with previous support for some
single-touch panels by GeneralTouch
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: NStéphane Chatty <chatty@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Added support for Cypress TrueTouch panels, which detect up to 10 fingers
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: NStéphane Chatty <chatty@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Created a driver for PixCir based dual-touch panels, including the one
in the Hanvon tablet.  This is done in a code structure aimed at unifying
support for several existing HID multitouch panels.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: NStéphane Chatty <chatty@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Currently hid doesn't export the features it knows to the specific modules.
Some information can be really important in such features: MosArt and
Cypress devices are by default not in a multitouch mode.
We have to send the value 2 on the right feature.

This patch exports to the module the features report so they can find the
right feature to set up the correct mode.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Replace #pragma pack ocurences with __atribute__((__packed__));
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch adds support for Roccat Kone[+] gaming mouse. Kone[+] is an enhanced version
of the old Kone with more memory for macros, a better sensor and more functionality.
This driver is conceptual similar to the existing Kone and Pyra drivers.
Userland tools can soon be found at http://sourceforge.net/projects/roccatSigned-off-by: NStefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The profile number is now passed via bin_attribute->private instead
of function parameter to reduce number of functions.
Signed-off-by: NStefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Using pack pragma to prevent padding bytes in binary data structures
used for hardware communication. Explanation of these pragmas was requested.
Signed-off-by: NStefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Adding sysfs attributes to an already created device raises no userland
notification. Now the device drivers associate the devices attributes
with a class and use this for roccat event char device creation.
Signed-off-by: NStefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Added the ioctl function to the compat_ioctl pointer in the file_operations
struct. Before this, some ioctls would fail for 32-bit apps on 64-bit systems.
Signed-off-by: NAlan Ott <alan@signal11.us>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

We have a memory leak in drivers/hid/hid-picolcd.c::picolcd_debug_out_report()
in an error path..  We are not always freeing the memory allocated to
'buff' - this patch makes sure we always kfree() what we allocate with
kmalloc() when it is no longer needed.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

CC: Bruno Prémont <bonbons@linux-vserver.org>
CC: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch doesn't alter functionality, but removes a dedicated kernel
thread.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Tested-by: NMaulik Mankad <x0082077@ti.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

So far the USBLED driver only supports Delcom's "USB Visual Signal
Indicator" (http://www.delcomproducts.com/products_USBLMP.asp). The
driver generates virtual files "red", "green", and "blue" under the
device's /sys/ directory, where color values can be read from and
written to.

This patch adds support for Dream Cheeky's "DL100B Webmail Notifier"
(http://www.dreamcheeky.com/webmail-notifier -- available from several
shops, such as http://www.conrad.at/ce/de/product/777048/USB-WEBMAIL).
This device isn't as pretty as Delcom's, but it's *far* cheaper, and
its 3 LEDs can be set in 32 brightness steps each. The grey envelope
contour can easily be removed, leaving a rather neutral white box (with
a few small holes), which is useful for generic signalling purposes.
Of course, the small circuit board can easily be put into a prettier
case.

The DL100B device pretends to be a HID, but the HID descriptor shows
that it's not overly useful as such (see below). The patch therefore
removes the "HID-ness" (hid-core.c, hid-ids.h), and adds the necessary
commands to usbled.c. The protocol info comes from the developer's
manual that Dream Cheeky kindly provided (815DeveloperManual.pdf).

HID descriptor:

  0: 05 01   Usage Page 'Generic Desktop Controls'
  2: 09 10   Usage 'Reserved'
  4: a1 01   Collection 'Application (mouse, keyboard)'
  6: 05 00           Usage Page 'Undefined'
  8: 19 10           Usage Minimum = 16
 10: 29 11           Usage Maximum = 17
 12: 15 00           Logical Minimum = 0
 14: 25 0f           Logical Maximum = 15
 16: 75 08           Report Size = 8
 18: 95 08           Report Count = 8
 20: 91 02           Output data *var abs lin pref-state null-pos non-vol bit-field
 22: 19 10           Usage Minimum = 16
 24: 29 11           Usage Maximum = 17
 26: 15 00           Logical Minimum = 0
 28: 25 0f           Logical Maximum = 15
 30: 75 08           Report Size = 8
 32: 95 08           Report Count = 8
 34: 81 00           Input data array abs lin pref-state null-pos non-vol bit-field
 36: c0      End Collection
Signed-off-by: NMelchior FRANZ <mfranz@aon.at>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds support for another Wetab device (726b), and grabs it
accordingly in hid-core.

[rydberg@euromail.se: rename and log message changes]
Signed-off-by: NAndy Ross <andy@plausible.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

The Samsung NB30 touch has a DWAV dual-touch device. This patch adds
the NB30 to the list of supported devices, and grabs it accordingly in
hid-core.

[rydberg@euromail.se: rename and log message changes]
Signed-off-by: NRichard Nauber <Richard.Nauber@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

Add the new supported devices to the kernel menu config help text.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Cc: Stephane Chatty <chatty@enac.fr>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

The Wetab tablet dual-touch controller works the same way as the one
in the Joojoo tablet. This patch adds the Wetab to the list of
supported devices, and grabs it accordingly in hid-core.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Cc: Stephane Chatty <chatty@enac.fr>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

The firmware in the joojoo reports touches sequentially, one per
report, which confuses the current driver. A further complication is
the absense of any indication of a touch frame. This patch converts
the driver to the MT slots protocol, and outputs one full touch frame
per report. This way, proper handling for both firmwares is ensured.
Tested-by: NPhilipp Merkel <mail@philmerk.de>
Cc: Stephane Chatty <chatty@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

Use estimated signal-to-noise ratios to reduce noise and limit the
amount of events emitted.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Cc: Stephane Chatty <chatty@enac.fr>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

The firmware reports a logical minimum of one, but in order for
userspace applications to correctly map all reported values to
non-zero pressure, the driver needs to report a logical minimum of
zero.  Fixed with this patch.
Tested-by: NPhilipp Merkel <mail@philmerk.de>
Cc: Stephane Chatty <chatty@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

The firmware of both supported devices report a X/Y maximum of 4095,
whereas in reality, it is eight times larger. Fixed with this patch.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Cc: Stephane Chatty <chatty@enac.fr>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

The hid core does not yet handle input filtering. Take over the setup
of the input device, so that proper signal-to-noise ratios can be
used.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Cc: Stephane Chatty <chatty@enac.fr>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

The drivers using the type B protocol all report tracking information
the same way. The contact id is semantically equivalent to
ABS_MT_SLOT, and the handling of ABS_MT_TRACKING_ID only complicates
the driver. The situation can be improved upon by providing a common
pointer emulation code, thereby removing the need for the tracking id
in the driver.  This patch moves all tracking event handling over to
the input core, simplifying both the existing drivers and the ones
currently in preparation.
Acked-by: NPing Cheng <pingc@wacom.com>
Acked-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

The MT slots devices all follow the same initialization pattern
of creating slots and hinting about buffer size. Let drivers call
an initialization function instead, and make sure it can be called
repeatedly without side effects.
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

In preparation for common code to handle a larger set of MT slots
devices, move the slots handling over to a separate file.
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>

Instead of using magic values, use their corresponding BTN_* defines
from linux/input.h.
Signed-off-by: NFlorian Fainelli <ffainelli@freebox.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The device has 2 modes. The first one is an emulation of a touchscreen
by sending left and right button, and the second mode is the one used in
dual-touch (sending trackingID, touch and else).

In case of a suspend/resume, the device switch back to the first mode
described above (with left and right buttons).
This adds a hook in .reset_resume for the device to be switched to
the correct mode (I just copied the code in mosart_probe).
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This commit allows the device to be recognized as a touchscreen, and not a
touchpad by xf86-input-evdev.

The device has 2 modes. The first one is an emulation of a touchscreen by
sending left and right button, and the second mode is the one used in
dual-touch (sending trackingID, touch and else).

That's why there is a hid report containing left and right buttons
(9000001 and 9000002). The point is that xorg relies on these fields to
determine if it's a touchpad or a touchscreen.
Clearing the report (return -1) makes xorg detecting it out of the box
as a quite pleasant (dual)touchscreen.
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: NChase Douglas <chase.douglas@canonical.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

flush_scheduled_work() is deprecated and scheduled to be removed.
Directly flush picolcd_fb_cleanup on exit instead.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>