Convert the main rq mapper (blk_rq_map_sg()) to the sg helper setup.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

First step to being able to change the scatterlist setup without
having to modify drivers (a lot :-)
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

It's a subsystem function, prefix it as such.
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Signed-off-by: NLaurent Riffard <laurent.riffard@free.fr>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Then we can get rid of ->issue_flush_fn() and all the driver private
implementations of that.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

This implements functionality to pass down or insert a barrier
in a queue, without having data attached to it. The ->prepare_flush_fn()
infrastructure from data barriers are reused to provide this
functionality.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

End of device check is done twice in __generic_make_request() and it's
fully inlined each time.  Factor out bio_check_eod().
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

We can use this helper in the elevator core for BLKPREP_KILL, and it'll
also be useful for the empty barrier patch.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

The empty barrier patches do not carry data, so they have no
iovec attached.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Use memset() to clear the bio, instead of doing each field manually.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Fix ?: construct, a typo, whitespace, and similar.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (95 commits)
  [ARM] 4578/1: CM-x270: PCMCIA support
  [ARM] 4577/1: ITE 8152 PCI bridge support
  [ARM] 4576/1: CM-X270 machine support
  [ARM] pxa: Avoid pxa_gpio_mode() in gpio_direction_{in,out}put()
  [ARM] pxa: move pxa_set_mode() from pxa2xx_mainstone.c to mainstone.c
  [ARM] pxa: move pxa_set_mode() from pxa2xx_lubbock.c to lubbock.c
  [ARM] pxa: Make cpu_is_pxaXXX dependent on configuration symbols
  [ARM] pxa: PXA3xx base support
  [NET] smc91x: fix PXA DMA support code
  [SERIAL] Fix console initialisation ordering
  [ARM] pxa: tidy up arch/arm/mach-pxa/Makefile
  [ARM] Update arch/arm/Kconfig for drivers/Kconfig changes
  [ARM] 4600/1: fix kernel build failure with build-id-supporting binutils
  [ARM] 4599/1: Preserve ATAG list for use with kexec (2.6.23)
  [ARM] Rename consistent_sync() as dma_cache_maint()
  [ARM] 4572/1: ep93xx: add cirrus logic edb9307 support
  [ARM] 4596/1: S3C2412: Correct IRQs for SDI+CF and add decoding support
  [ARM] 4595/1: ns9xxx: define registers as void __iomem * instead of volatile u32
  [ARM] 4594/1: ns9xxx: use the new gpio functions
  [ARM] 4593/1: ns9xxx: implement generic clockevents
  ...

* 'locks' of git://linux-nfs.org/~bfields/linux:
  nfsd: remove IS_ISMNDLCK macro
  Rework /proc/locks via seq_files and seq_list helpers
  fs/locks.c: use list_for_each_entry() instead of list_for_each()
  NFS: clean up explicit check for mandatory locks
  AFS: clean up explicit check for mandatory locks
  9PFS: clean up explicit check for mandatory locks
  GFS2: clean up explicit check for mandatory locks
  Cleanup macros for distinguishing mandatory locks
  Documentation: move locks.txt in filesystems/
  locks: add warning about mandatory locking races
  Documentation: move mandatory locking documentation to filesystems/
  locks: Fix potential OOPS in generic_setlease()
  Use list_first_entry in locks_wake_up_blocks
  locks: fix flock_lock_file() comment
  Memory shortage can result in inconsistent flocks state
  locks: kill redundant local variable
  locks: reverse order of posix_locks_conflict() arguments

* 'release' of ssh://master.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] build fix for scatterlist

This driver was using hooks that were very recently removed.
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (42 commits)
  [IPV6]: Consolidate the ip6_pol_route_(input|output) pair
  [TCP]: Make snd_cwnd_cnt 32-bit
  [TCP]: Update the /proc/net/tcp documentation
  [NETNS]: Don't panic on creating the namespace's loopback
  [NEIGH]: Ensure that pneigh_lookup is protected with RTNL
  [INET]: kmalloc+memset -> kzalloc in frag_alloc_queue
  [ISDN]: Fix compile with CONFIG_ISDN_X25 disabled.
  [IPV6]: Replace sk_buff ** with sk_buff * in input handlers
  [SELINUX]: Update for netfilter ->hook() arg changes.
  [INET]: Consolidate the xxx_put
  [INET]: Small cleanup for xxx_put after evictor consolidation
  [INET]: Consolidate the xxx_evictor
  [INET]: Consolidate the xxx_frag_destroy
  [INET]: Consolidate xxx_the secret_rebuild
  [INET]: Consolidate the xxx_frag_kill
  [INET]: Collect common frag sysctl variables together
  [INET]: Collect frag queues management objects together
  [INET]: Move common fields from frag_queues in one place.
  [TG3]: Fix performance regression on 5705.
  [ISDN]: Remove local copy of device name to make sure renames work.
  ...

There are standard keycodes for brightness and volume; map the events to
emit them so that things work properly
Signed-off-by: NJeremy Katz <katzj@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

include/scsi/scsi_eh.h:79: error: field `sense_sgl' has incomplete type

x86 resolves this by including scatterlist.h from dma-mapping.h which
seems as good a place as any.
Signed-off-by: NTony Luck <tony.luck@intel.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits)
  Input: use full RCU API
  Input: remove tsdev interface
  Input: add support for Blackfin BF54x Keypad controller
  Input: appletouch - another fix for idle reset logic
  HWMON: hdaps - switch to using input-polldev
  Input: add support for SEGA Dreamcast keyboard
  Input: omap-keyboard - don't pretend we support changing keymap
  Input: lifebook - fix X and Y axis range
  Input: usbtouchscreen - add support for GeneralTouch devices
  Input: fix open count handling in input interfaces
  Input: keyboard - add CapsShift lock
  Input: adbhid - produce all CapsLock key events
  Input: ALPS - add signature for ThinkPad R61
  Input: jornada720_kbd - send MSC_SCAN events
  Input: add support for the HP Jornada 7xx (710/720/728) touchscreen
  Input: add support for HP Jornada 7xx onboard keyboard
  Input: add support for HP Jornada onboard keyboard (HP6XX)
  Input: ucb1400_ts - use schedule_timeout_uninterruptible
  Input: xpad - fix dependancy on LEDS class
  Input: auto-select INPUT for MAC_EMUMOUSEBTN option
  ...

Resolved conflicts manually in drivers/hwmon/applesmc.c: converting from
a class device to a device and converting to use input-polldev created a
few apparently trivial clashes..

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] pata_pcmcia: Add additional id string (corsair, 1GB)
  libata: prevent devices with blank model names from being DMA blacklisted
  ata_piix: SATA 2port controller port map fix
  pata_cs5536: ATA driver for Geode companion chip
  libata: add ST9160821AS / 3.CCD to NCQ blacklist
  libata: fix revalidation issuing after configuration commands
  [libata] sata_nv: add SW NCQ support for MCP51/MCP55/MCP61
  [libata] pata_sil680: Add MMIO support

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (35 commits)
  xen-netfront: rearrange netfront structure to separate tx and rx
  netdev: convert non-obvious instances to use ARRAY_SIZE()
  ucc_geth: Fix build break introduced by commit 09f75cd7
  gianfar: Fix regression caused by new napi interface
  gianfar: Cleanup compile warning caused by 0795af57
  gianfar: Fix compile regression caused by bea3348e
  add new prom.h for AU1x00
  update AU1000 get_ethernet_addr()
  MIPSsim: General cleanup
  Jazzsonic: Fix warning about unused variable.
  Remove msic_dcr_read() in axon_msi.c
  Use dcr_host_t.base in dcr_unmap()
  Add dcr_host_t.base in dcr_read()/dcr_write()
  Use dcr_host_t.base in ibm_emac_mal
  Update ibm_newemac to use dcr_host_t.base
  tehuti: possible leak in bdx_probe
  TC35815: Fix build
  SAA9730: Fix build
  AR7 ethernet
  myri10ge: update driver version to 1.3.2-1.287
  ...

Keep tx and rx elements separate on different cachelines to prevent
bouncing.
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Acked-by: NJeff Garzik <jgarzik@pobox.com>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Atari keyboard: incorporate additional review comments:
  o Kill reference to source file name
  o Return error value from input_register_device() instead of -ENOMEM
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The difference in both functions is in the "id" passed to
the rt6_select, so just pass it as an extra argument from
two outer helpers.

This is minus 60 lines of code and 360 bytes of .text
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Very little point of having 32-bit snd_cnwd if this is not
32-bit as well, as a number of snd_cwnd incrementation formulas
assume that snd_cwnd_cnt can be at least as large as snd_cwnd.

Whether 32-bit is useful was discussed when e0ef57cc
was made:
  http://marc.info/?l=linux-netdev&m=117218144409825&w=2Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* Say that this interface is deprecated.
* Update function name references to match the current code.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This will convert remaining non-obvious or naive calculations of array
sizes to use ARRAY_SIZE() macro.
Signed-off-by: NAlejandro Martinez Ruiz <alex@flawedcode.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

When the loopback device is failed to initialize inside the new 
namespaces, panic() is called. Do not do it when the namespace 
in question is not the init_net.

Plus cleanup the error path a bit.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 90833fda ("[ARM] 4554/1: replace
consistent_sync() with flush_ioremap_region()") introduced a new
"flush_ioremap_region()" function to be used by the MTD mainstone-flash
and lubbock-flash drivers to fix a regression from around 2.6.18.

Those drivers were independently merged into a single driver by Todd
Poynor in commit e644f7d6 ("[MTD] MAPS:
Merge Lubbock and Mainstone drivers into common PXA2xx driver")

Later, those two commits were merged into the main MTD tree by commit
b160292c ("Merge Linux 2.6.23") by David
Woodhouse, but in that merge, the fix to use flush_iomap_region() got
lost (as it was to files that now no longer existed).

This reinstates the fix in the new driver.
Noticed-by: NRussell King <rmk@arm.linux.org.uk>
Tested-and-acked-by: NNicolas Pitre <nico@cam.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jared Hulbert <jaredeh@gmail.com>
Cc: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The pnigh_lookup is used to lookup proxy entries and to 
create them in case lookup failed. 

However, the "creation" code does not perform the re-lookup
after GFP_KERNEL allocation. This is done because the code
is expected to be protected with the RTNL lock, so add the 
assertion (mainly to address future questions from new network 
developers like me :) ).
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

kmalloc + memset -> kzalloc in frag_alloc_queue
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On Mon, Oct 15, 2007 at 06:44:56PM +0400, Denis V. Lunev wrote:
Compilation fix. The problem appears after
7c076d1de869256848dacb8de0050a3a390f95df by Karsten Keil <kkeil@suse.de>
Acked-by: NKarsten Keil <kkeil@suse.de>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NKristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

With all the users of the double pointers removed from the IPv6 input path,
this patch converts all occurances of sk_buff ** to sk_buff * in IPv6 input
handlers.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the gdth module is loaded (or compiled in), the gdth_timeout function
gets started even if no actual gdth controllers are found b the probing.

That ends up not only being unnecessary, but also causes a crash due to
the function blindly just trying to pick the first entry off the
"gdth_instances" list, and accessing it - which obviously doesn't work
if the list is empty!

Noticed by Ingo Molnar.
Tested-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The strn_pattern_cmp routine does not handle a blank name parameter
properly. The only patterns which should match a blank name are "*"
and an explicit "". If the function is passed a blank name in current
code, it will always match against the patt parameter. The bug manifests
itself as the device with the empty model name always matching the first
device in the DMA blacklist, forcing it to revert to PIO mode.
Signed-off-by: NAndrew Paprocki <andrew@ishiboo.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch adds a port map for ICH9 and ICH8 SATA controllers that have only 2 ports available in that mode.
Signed-off-by: NJason Gaston <jason.d.gaston@intel.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This is a driver for the ATA controller on the Geode CS5536 companion
chip.  The PCI device ID for this device was previously claimed by
pata_amd.c but the PIO timings were not correct.  This driver also
works around a bug in some BIOSes that handle unaligned access to the
PCI config registers poorly.  Finally, the driver allows fallback to
using MSR registers for configuration on BIOSes that are truly
broken.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>