Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

This patch set adds generic abstract layer support for acpi video driver to
have generic user interface to control backlight and output switch control by
leveraging the existing backlight sysfs class driver, and by adding a new
video output sysfs class driver.

This patch:

Add dev argument for backlight_device_register to link the class device to
real device object.  The platform specific driver should find a way to get the
real device object for their video device.

[akpm@osdl.org: build fix]
[akpm@osdl.org: fix msi-laptop.c]
Signed-off-by: NLuming Yu <Luming.yu@intel.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

Add support for the generic backlight interface below /sys/class/backlight.
Keep the procfs brightness handling for backward compatibility.

[apw@shadowen.org: backlight users need to select BACKLIGHT_CLASS_DEVICE]
Signed-off-by: NHolger Macht <hmacht@suse.de>
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

This reporting is useless (we errno anyway).
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

ICC complains about a "Pointless comparsion of unsigned interger with zero"
@ line 760 & 808 of asus_acpi.c

parse_arg() mentioned below returns -E but it's copied into unsigned variable...
Signed-off-by: NDarren Jenkins <darrenrjenkins@gmail.com>
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NJan Engelhardt <jengelh@gmx.de>
Signed-off-by: NLen Brown <len.brown@intel.com>

Add support for W3000 (W3V) and indirectly fixes an issue with kmilo under KDE
(it was triggering excessive LCD read error messages by querying asus_acpi
module) allowing people (I am probably the only one who tested this) with
W3000 to run kmilo.

Cc: Karol Kozimor <sziwan@hell.org.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

This patch switches back the display nodes for M6R and M6N -- this happened
a while ago when a patch was misapplied (only the in-tree version was
affected).
Signed-off-by: NKarol Kozimor <sziwan@hell.org.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

This patch switches back the display nodes for M6R and M6N -- this happened
a while ago when a patch was misapplied (only the in-tree version was
affected).
Signed-off-by: NKarol Kozimor <sziwan@hell.org.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

This small patch adds back WLED control for S1N models, this was
accidentally removed a while ago.
Signed-off-by: NKarol Kozimor <sziwan@hell.org.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

This patch reworks laptop model detection.

This addresses the Samsung P30 issue, where the INIT method would return no
object, but the implicit return in the AML interpreter would confuse the
driver. It also accounts for a newer batch of Asus models whose INIT
returns ACPI_TYPE_BUFFER instead of STRING.

The handling is now much leaner, if we get a buffer or a string, we check
against known values, in every other case we use a different path
(currently DSDT signatures). The bulk of this patch is separating the
string matching from asus_hotk_get_info() into a separate function.

This patch properly fixes http://bugme.osdl.org/show_bug.cgi?id=5067 and
http://bugme.osdl.org/show_bug.cgi?id=5092 and makes the driver fully
functional again with acpi=strict on all machines.
Signed-off-by: NKarol Kozimor <sziwan@hell.org.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

This patch adds support for Asus L5D and thus fixes
http://bugme.osdl.org/show_bug.cgi?id=4695Signed-off-by: NKarol Kozimor <sziwan@hell.org.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

This patch creates a new file named "bluetooth" under /proc/acpi/asus/.
This file controls both the internal Bluetooth adapter's presence on the
USB bus and the associated LED.

echo 1 > /proc/acpi/asus/bluetooth to enable, 0 to disable.

Additionally, the patch add support for Asus W5A, the first model that uses
this feature.

Patch originally by Fernando A. P. Gomes.
Signed-off-by: NKarol Kozimor <sziwan@hell.org.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

This patch adds support for Asus A4G.
Originally by Giuseppe Rota.
Signed-off-by: NKarol Kozimor <sziwan@hell.org.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

This patch adds support for Asus W3400N.
Signed-off-by: NKarol Kozimor <sziwan@hell.org.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

This patch adds handling for front LED displays found on W1N and the like.
Additionally, W1N is given its own model_data instance.

Patch originally by Éric Burghard.
Signed-off-by: NKarol Kozimor <sziwan@hell.org.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

This patch adds support for Asus A3G.
Signed-off-by: NKarol Kozimor <sziwan@hell.org.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

This patch updates the version string, copyright notices and does
whitespace cleanup (it looks weird, blame Lindent).
Signed-off-by: NKarol Kozimor <sziwan@hell.org.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NLen Brown <len.brown@intel.com>

Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: NFrancois Romieu <romieu@fr.zoreil.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

Removed a device initialization optimization introduced in
20051216 where the _STA method was not run unless an _INI
was also present for the same device. This optimization
could cause problems because it could allow _INI methods
to be run within a not-present device subtree (If a
not-present device had no _INI, _STA would not be run,
the not-present status would not be discovered, and the
children of the device would be incorrectly traversed.)

Implemented a new _STA optimization where namespace
subtrees that do not contain _INI are identified and
ignored during device initialization. Selectively running
_STA can significantly improve boot time on large machines
(with assistance from Len Brown.)

Implemented support for the device initialization case
where the returned _STA flags indicate a device not-present
but functioning. In this case, _INI is not run, but the
device children are examined for presence, as per the
ACPI specification.

Implemented an additional change to the IndexField support
in order to conform to MS behavior. The value written to
the Index Register is not simply a byte offset, it is a
byte offset in units of the access width of the parent
Index Field. (Fiodor Suietov)

Defined and deployed a new OSL interface,
acpi_os_validate_address().  This interface is called during
the creation of all AML operation regions, and allows
the host OS to exert control over what addresses it will
allow the AML code to access. Operation Regions whose
addresses are disallowed will cause a runtime exception
when they are actually accessed (will not affect or abort
table loading.)

Defined and deployed a new OSL interface,
acpi_os_validate_interface().  This interface allows the host OS
to match the various "optional" interface/behavior strings
for the _OSI predefined control method as appropriate
(with assistance from Bjorn Helgaas.)

Restructured and corrected various problems in the
exception handling code paths within DsCallControlMethod
and DsTerminateControlMethod in dsmethod (with assistance
from Takayoshi Kochi.)

Modified the Linux source converter to ignore quoted string
literals while converting identifiers from mixed to lower
case. This will correct problems with the disassembler
and other areas where such strings must not be modified.

The ACPI_FUNCTION_* macros no longer require quotes around
the function name. This allows the Linux source converter
to convert the names, now that the converter ignores
quoted strings.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: NFrancois Romieu <romieu@fr.zoreil.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

Even though the devices claimed by asus_acpi.c can not be hot-plugged, the
driver registration infrastructure allows the .add() and .remove() methods to
be called at any time while the driver is registered.  So remove __init and
__exit from them.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

Remove the assumption that acpi_bus_register_driver() returns the number of
devices claimed.  Returning the count is unreliable because devices may be
hot-plugged in the future (admittedly not applicable for this driver).

Since the hardware for this driver is not hot-pluggable, determine whether the
hardware is present by noticing calls to the .add() method.  It would be
better to probe the ACPI namespace for the ASUS HIDs, and load the driver only
when we find one, but ACPI doesn't support that yet.

I don't have an ASUS laptop to test on, but on my HP dl360, it does report the
appropriate error when attempting to load the module:

    $ sudo insmod drivers/acpi/asus_acpi.ko
    insmod: error inserting 'drivers/acpi/asus_acpi.ko': -1 No such device
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NKarol Kozimor <sziwan@hell.org.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

This patch corrects the node to read display settings on M6R laptops.
Signed-off-by: NKarol Kozimor <sziwan@hell.org.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

The code used to rely on a certain method to return a NULL buffer, which
is now hardly possible with the implicit return code on by default. This
sort of fixes bugs #5067 and #5092 for now.

Note: this patch makes the driver unusable on said machines (and on said
machines only) iff acpi=strict is specified, but it seems noone really uses
that.
Signed-off-by: NKarol Kozimor <sziwan@hell.org.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NLen Brown <len.brown@intel.com>

See Documentation/acpi-hotkey.txt

Use cmdline "acpi_specific_hotkey" to enable
legacy platform specific drivers.

http://bugzilla.kernel.org/show_bug.cgi?id=3887Signed-off-by: NLuming Yu <luming.yu@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!