- 25 11月, 2014 1 次提交
-
-
由 Grant Likely 提交于
The OF_RECONFIG notifier callback uses a different structure depending on whether it is a node change or a property change. This is silly, and not very safe. Rework the code to use the same data structure regardless of the type of notifier. Signed-off-by: NGrant Likely <grant.likely@linaro.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: <linuxppc-dev@lists.ozlabs.org>
-
- 15 10月, 2014 1 次提交
-
-
由 Bharata B Rao 提交于
- ibm,rtas-configure-connector should treat the RTAS data as big endian. - Treat ibm,ppc-interrupt-server#s as big-endian when setting smp_processor_id during hotplug. Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com> Acked-by: NNathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 25 9月, 2014 1 次提交
-
-
由 Thomas Falcon 提交于
When removing a cpu, this patch makes sure that values gotten from or passed to firmware are in the correct endian format. Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 28 4月, 2014 1 次提交
-
-
由 Li Zhong 提交于
commit 41dd03a9 may cause Oops in rtas_stop_self(). The reason is that the rtas_args was moved into stack space. For a box with more that 4GB RAM, the stack could easily be outside 32bit range, but RTAS is 32bit. So the patch moves rtas_args away from stack by adding static before it. Signed-off-by: NLi Zhong <zhong@linux.vnet.ibm.com> Signed-off-by: NAnton Blanchard <anton@samba.org> Cc: stable@vger.kernel.org # 3.14+ Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 07 3月, 2014 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This results in oddball messages at boot on other platforms telling us that CPU hotplug isn't supported even when it is. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 28 2月, 2014 1 次提交
-
-
由 Tony Breeds 提交于
Currently we're storing a host endian RTAS token in rtas_stop_self_args.token. We then pass that directly to rtas. This is fine on big endian however on little endian the token is not what we expect. This will typically result in hitting: panic("Alas, I survived.\n"); To fix this we always use the stop-self token in host order and always convert it to be32 before passing this to rtas. Signed-off-by: NTony Breeds <tony@bakeyournoodle.com> Cc: stable@vger.kernel.org Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 27 8月, 2013 1 次提交
-
-
由 Deepthi Dharwar 提交于
As a part of pseries_idle backend driver cleanup to make the code common to both pseries and powernv platforms, it is necessary to move the backend-driver code to drivers/cpuidle. As a pre-requisite for that, it is essential to move plpar_wrapper.h to include/asm. Signed-off-by: NDeepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 14 8月, 2013 1 次提交
-
-
由 Anton Blanchard 提交于
Although the shared_proc field in the lppaca works today, it is not architected. A shared processor partition will always have a non zero yield_count so use that instead. Create a wrapper so users don't have to know about the details. In order for older kernels to continue to work on KVM we need to set the shared_proc bit. While here, remove the ugly bitfield. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 10 1月, 2013 1 次提交
-
-
由 Li Zhong 提交于
The pseries CPU hotplug code uses cede_processor without properly synchronizing the SW and HW interrupt enable state. This fixes it using the same helpers that were written for the idle code. Signed-off-by: NLi Zhong <zhong@linux.vnet.ibm.com> ======================= Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 15 11月, 2012 1 次提交
-
-
由 Nathan Fontenot 提交于
This patch moves the notification chain for updates to the device tree from the powerpc/pseries code to the base OF code. This makes this functionality available to all architectures. Additionally the notification chain is updated to allow notifications for property add/remove/update. To make this work a pointer to a new struct (of_prop_reconfig) is passed to the routines in the notification chain. The of_prop_reconfig property contains a pointer to the node containing the property and a pointer to the property itself. In the case of property updates, the property pointer refers to the new property. Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com> Acked-by: NRob Herring <rob.herring@calxeda.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 29 3月, 2012 1 次提交
-
-
由 David Howells 提交于
Disintegrate asm/system.h for PowerPC. Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> cc: linuxppc-dev@lists.ozlabs.org
-
- 01 11月, 2011 1 次提交
-
-
由 Paul Gortmaker 提交于
They are getting it through device.h --> module.h path, but we want to clean that up. This is a sample of what will happen if we don't: pseries/iommu.c: In function 'tce_build_pSeriesLP': pseries/iommu.c:136: error: implicit declaration of function 'show_stack' pseries/eeh.c: In function 'eeh_token_to_phys': pseries/eeh.c:359: error: 'init_mm' undeclared (first use in this function) pseries/eeh_event.c: In function 'eeh_event_handler': pseries/eeh_event.c:63: error: implicit declaration of function 'daemonize' pseries/eeh_event.c:64: error: implicit declaration of function 'set_current_state' pseries/eeh_event.c:64: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function) pseries/eeh_event.c:64: error: (Each undeclared identifier is reported only once pseries/eeh_event.c:64: error: for each function it appears in.) pseries/eeh_event.c: In function 'eeh_thread_launcher': pseries/eeh_event.c:109: error: 'CLONE_KERNEL' undeclared (first use in this function) hotplug-cpu.c: In function 'pseries_mach_cpu_die': hotplug-cpu.c:115: error: implicit declaration of function 'idle_task_exit' kernel/swsusp_64.c: In function 'do_after_copyback': kernel/swsusp_64.c:17: error: implicit declaration of function 'touch_softlockup_watchdog' cell/spufs/context.c: In function 'alloc_spu_context': cell/spufs/context.c:60: error: implicit declaration of function 'get_task_mm' cell/spufs/context.c:60: warning: assignment makes pointer from integer without a cast cell/spufs/context.c: In function 'spu_forget': cell/spufs/context.c:127: error: implicit declaration of function 'mmput' pasemi/dma_lib.c: In function 'pasemi_dma_stop_chan': pasemi/dma_lib.c:332: error: implicit declaration of function 'cond_resched' sysdev/fsl_lbc.c: In function 'fsl_lbc_ctrl_irq': sysdev/fsl_lbc.c:247: error: 'TASK_NORMAL' undeclared (first use in this function) Add in sched.h so these get the definitions they are looking for. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 05 8月, 2011 1 次提交
-
-
由 Anton Blanchard 提交于
The VPA, SLB shadow and DTL degistration functions do not need an address, so simplify things and remove it. Also cleanup pseries_kexec_cpu_down a bit by storing the cpu IDs in local variables. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 29 6月, 2011 1 次提交
-
-
由 Akinobu Mita 提交于
Reconfiguration notifier call for device node may fail by several reasons, but it always assumes kmalloc failures. This enables reconfiguration notifier call chain to get the actual error code rather than -ENOMEM by converting all reconfiguration notifier calls to return encapsulate error code with notifier_from_errno(). Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 04 5月, 2011 1 次提交
-
-
由 KOSAKI Motohiro 提交于
Adapt new API. Almost change is trivial. Most important change is the below line because we plan to change task->cpus_allowed implementation. - ctx->cpus_allowed = current->cpus_allowed; Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 20 4月, 2011 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This is a significant rework of the XICS driver, too significant to conveniently break it up into a series of smaller patches to be honest. The driver is moved to a more generic location to allow new platforms to use it, and is broken up into separate ICP and ICS "backends". For now we have the native and "hypervisor" ICP backends and one common RTAS ICS backend. The driver supports one ICP backend instanciation, and many ICS ones, in order to accomodate future platforms with multiple possibly different interrupt "sources" mechanisms. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 31 3月, 2011 1 次提交
-
-
由 Lucas De Marchi 提交于
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
-
- 31 7月, 2010 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
In testing SMT disable, we have been regularly seeing the following message: Querying DEAD? cpu %i (%i) shows %i This indicates the current delay in pseries_cpu_die where we wait for the specified CPU to die, is insufficient. Usually, this does not cause a problem, but we've seen this result in BUG_ON's going off in the timer code when we try to migrate the timers off the dead cpu while a timer is still running. Increasing this delay, as is done in this patch, seems to resolve this issue. Signed-off-by: NBrian King <brking@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 09 7月, 2010 1 次提交
-
-
由 Brian King 提交于
Enables support for HMC initiated partition hibernation. This is a firmware assisted hibernation, since the firmware handles writing the memory out to disk, along with other partition information, so we just mimic suspend to ram. Signed-off-by: NBrian King <brking@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 06 5月, 2010 3 次提交
-
-
由 Anton Blanchard 提交于
Since the *_map cpumask variants are deprecated, change the comments to instead refer to *_mask. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
Convert hotplug-cpu code to new cpumask API. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
This moves query_cpu_stopped() out of the hotplug cpu code and into smp.c so it can called in other places and renames it to smp_query_cpu_stopped(). It also cleans up the return values by adding some #defines Cc: <stable@kernel.org> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 09 3月, 2010 3 次提交
-
-
由 Vaidyanathan Srinivasan 提交于
Remove debug printks in pseries_mach_cpu_die(). These are noisy at runtime. Traceevents can be added to instrument this section of code. The following KERN_INFO printks are removed: cpu 62 (hwid 62) returned from cede. Decrementer value = b2802fff Timebase value = 2fa8f95035f4a cpu 62 (hwid 62) got prodded to go online cpu 58 (hwid 58) ceding for offline with hint 2 Signed-off-by: NVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Vaidyanathan Srinivasan 提交于
Rearrange condition checks for better code readability and prevention of possible race conditions when preferred_offline_state can potentially change during the execution of pseries_mach_cpu_die(). The patch will make pseries_mach_cpu_die() put cpu in one of the consistent states and not hit the run over BUG() Signed-off-by: NVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Vaidyanathan Srinivasan 提交于
Cpu hotplug (offline) without dlpar operation will place cpu in cede state and the extended_cede_processor() function will return when resumed. Kernel stack pointer needs to be reset before start_secondary() is called to continue the online operation. Added new function start_secondary_resume() to do the above steps. Signed-off-by: NVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 09 2月, 2010 2 次提交
-
-
由 Anton Blanchard 提交于
The cede latency stuff is relatively new and we don't need to complain about it not working on older firmware. Signed-off-by: NAnton Blanchard <anton@samba.org> Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Joe Perches 提交于
String constants that are continued on subsequent lines with \ are not good. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 24 11月, 2009 1 次提交
-
-
由 Gautham R Shenoy 提交于
When a CPU is offlined on POWER currently, we call rtas_stop_self() and hand the CPU back to the resource pool. This path is used for DLPAR which will cause a change in the LPAR configuration which will be visible outside. This patch changes the default state a CPU is put into when it is offlined. On platforms which support ceding the processor to the hypervisor with latency hint specifier value, during a cpu offline operation, instead of calling rtas_stop_self(), we cede the vCPU to the hypervisor while passing a latency hint specifier value. The Hypervisor can use this hint to provide better energy savings. Also, during the offline operation, the control of the vCPU remains with the LPAR as oppposed to returning it to the resource pool. The patch achieves this by creating an infrastructure to set the preferred_offline_state() which can be either - CPU_STATE_OFFLINE: which is the current behaviour of calling rtas_stop_self() - CPU_STATE_INACTIVE: which cedes the vCPU to the hypervisor with the latency hint specifier. The codepath which wants to perform a DLPAR operation can set the preferred_offline_state() of a CPU to CPU_STATE_OFFLINE before invoking cpu_down(). The patch also provides a boot-time command line argument to disable/enable CPU_STATE_INACTIVE. Signed-off-by: NGautham R Shenoy <ego@in.ibm.com> Signed-off-by: NNathan Fontenot <nfont@austin.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 24 9月, 2009 1 次提交
-
-
由 Rusty Russell 提交于
Use the accessors rather than frobbing bits directly (the new versions are const). Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NMike Travis <travis@sgi.com>
-
- 23 12月, 2008 1 次提交
-
-
由 Sebastien Dugue 提交于
Currently, pseries_cpu_die() calls msleep() while polling RTAS for the status of the dying cpu. However, if the cpu that is going down also happens to be the one doing the tick then we're hosed as the tick_do_timer_cpu 'baton' is only passed later on in tick_shutdown() when _cpu_down() does the CPU_DEAD notification. Therefore jiffies won't be updated anymore. This replaces that msleep() with a cpu_relax() to make sure we're not going to schedule at that point. With this patch my test box survives a 100k iterations hotplug stress test on _all_ cpus, whereas without it, it quickly dies after ~50 iterations. Signed-off-by: NSebastien Dugue <sebastien.dugue@bull.net> Cc: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 07 2月, 2008 1 次提交
-
-
由 Nathan Fontenot 提交于
This splits off the kexec path bits of the xics_teardown_cpu() routine into its own xics_kexec_teardown_cpu() routine. With the previous combined routine the CPPR for a cpu that is being removed may have its CPPR reset in the plpar_eoi() call (which explicitly sets the CPPR to a non-zero value). Splitting of the kexec bits of the code prevents this from happening in the cpu remove path. Once again, this does not cause the cpu remove from the kernel to fail, but it does cause cpu dlpar operations to not be able to return the cpu to the hypervisor. Signed-off-by: NNathan Fontenot <nfont@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 26 1月, 2008 1 次提交
-
-
由 Gautham R Shenoy 提交于
Replace all lock_cpu_hotplug/unlock_cpu_hotplug from the kernel and use get_online_cpus and put_online_cpus instead as it highlights the refcount semantics in these operations. The new API guarantees protection against the cpu-hotplug operation, but it doesn't guarantee serialized access to any of the local data structures. Hence the changes needs to be reviewed. In case of pseries_add_processor/pseries_remove_processor, use cpu_maps_update_begin()/cpu_maps_update_done() as we're modifying the cpu_present_map there. Signed-off-by: NGautham R Shenoy <ego@in.ibm.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 11 1月, 2008 1 次提交
-
-
由 Michael Neuling 提交于
Before we register the SLB shadow buffer, we need to invalidate the entries in the buffer, otherwise we can end up stale entries from when we previously offlined the CPU. This does this invalidate as well as unregistering the buffer with PHYP before we offline the cpu. Tested and fixes crashes seen on 970MP (thanks to tonyb) and POWER5. Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 11 10月, 2007 1 次提交
-
-
由 Olof Johansson 提交于
Don't allow cpu hotplug on systems lacking XICS interrupt controller (i.e. with an MPIC interrupt controller), since the current pSeries platform code is hardcoded for XICS. This works around the bug reported by Paul Mackerras where the disable_nonboot_cpus() call recently added to the shutdown path will cause an oops on older pSeries machines. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 13 4月, 2007 1 次提交
-
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 08 12月, 2006 5 次提交
-
-
由 Michael Ellerman 提交于
Purely cosmetic. Change pSeries to pseries inline with other parts of the kernel, and fix an overly long line. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
To support cpu hotplug on pseries we require two RTAS tokens. The cpu hotplug machinery should only be wired up if these tokens are found in the device tree. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Move the rest of the hotplug cpu code from platforms/pseries/smp.c into platforms/pseries/hotplug-cpu.c. Wire up the smp_ops callbacks and the notifier in the hotplug cpu initcall, rather than in smp_init_pseries(). No change in behaviour. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Move pSeries_mach_cpu_die() into platforms/pseries/hotplug-cpu.c, this allows rtas_stop_self() to be static so remove the prototype. Wire up pSeries_mach_cpu_die() in the initcall, rather than statically in setup.c, the initcall will still run prior to the cpu hotplug code being callable, so there should be no change in behaviour. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
As the first step in consolidating the pseries hotplug cpu code, create platforms/pseries/hotplug-cpu.c and move rtas_stop_self() into it. Do the rtas token initialisation in a new initcall, rather than rtas_initialize(). Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-