- 17 9月, 2014 3 次提交
-
-
由 Tang Chen 提交于
In init_rmode_identity_map(), there two variables indicating the return value, r and ret, and it return 0 on error, 1 on success. The function is only called by vmx_create_vcpu(), and ret is redundant. This patch removes the redundant variable, and makes init_rmode_identity_map() return 0 on success, -errno on failure. Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Tang Chen 提交于
kvm_arch->ept_identity_pagetable holds the ept identity pagetable page. But it is never used to refer to the page at all. In vcpu initialization, it indicates two things: 1. indicates if ept page is allocated 2. indicates if a memory slot for identity page is initialized Actually, kvm_arch->ept_identity_pagetable_done is enough to tell if the ept identity pagetable is initialized. So we can remove ept_identity_pagetable. NOTE: In the original code, ept identity pagetable page is pinned in memroy. As a result, it cannot be migrated/hot-removed. After this patch, since kvm_arch->ept_identity_pagetable is removed, ept identity pagetable page is no longer pinned in memory. And it can be migrated/hot-removed. Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Reviewed-by: NGleb Natapov <gleb@kernel.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Cornelia Huck 提交于
Using the new kvm_register_device_ops() interface makes us get rid of an #ifdef in common code. Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 16 9月, 2014 1 次提交
-
-
由 Guo Hui Liu 提交于
This patch replace the set_bit method by kvm_make_request to make code more readable and consistent. Signed-off-by: NGuo Hui Liu <liuguohui@gmail.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 11 9月, 2014 2 次提交
-
-
由 Paolo Bonzini 提交于
Initially the tracepoint was added only to the APIC_DM_FIXED case, also because it reported coalesced interrupts that only made sense for that case. However, the coalesced argument is not used anymore and tracing other delivery modes is useful, so hoist the call out of the switch statement. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Tang Chen 提交于
We have APIC_DEFAULT_PHYS_BASE defined as 0xfee00000, which is also the address of apic access page. So use this macro. Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com> Reviewed-by: NGleb Natapov <gleb@kernel.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 10 9月, 2014 7 次提交
-
-
由 Christian Borntraeger 提交于
r is already initialized to 0. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
-
由 Christian Borntraeger 提交于
The old handling of prefix pages was broken in the diag10 ballooner. We now rely on gmap_discard to check for start > end and do a slow path if the prefix swap pages are affected: 1. discard the pages from start to prefix 2. discard the absolute 0 pages 3. discard the pages after prefix swap to end Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
-
由 Christian Borntraeger 提交于
Due to the earlier check we know that ipte_lock_count must be 0. No need to add a useless if. Let's make clear that we are going to always wakeup when we execute that code. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Christian Borntraeger 提交于
We must not fallthrough if the conditions for external call are not met. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com> Cc: stable@vger.kernel.org
-
由 Christian Borntraeger 提交于
Currently we fill up a full 5 level page table to hold the guest mapping. Since commit "support gmap page tables with less than 5 levels" we can do better. Having more than 4 TB might be useful for some testing scenarios, so let's just limit ourselves to 16TB guest size. Having more than that is totally untested as I do not have enough swap space/memory. We continue to allow ucontrol the full size. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Christian Borntraeger 提交于
We now propagate interrupt injection errors back to the ioctl. We should mark functions that might fail with __must_check. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
-
由 Tony Krowiak 提交于
We have to provide a per guest crypto block for the CPUs to enable MSA4 instructions. According to icainfo on z196 or later this enables CCM-AES-128, CMAC-AES-128, CMAC-AES-192 and CMAC-AES-256. Signed-off-by: NTony Krowiak <akrowiak@linux.vnet.ibm.com> Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: NMichael Mueller <mimu@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> [split MSA4/protected key into two patches]
-
- 05 9月, 2014 2 次提交
-
-
由 Paolo Bonzini 提交于
Currently, if a permission error happens during the translation of the final GPA to HPA, walk_addr_generic returns 0 but does not fill in walker->fault. To avoid this, add an x86_exception* argument to the translate_gpa function, and let it fill in walker->fault. The nested_page_fault field will be true, since the walk_mmu is the nested_mmu and translate_gpu instead operates on the "outer" (NPT) instance. Reported-by: NValentine Sinitsyn <valentine.sinitsyn@gmail.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
If a nested page fault happens during emulation, we will inject a vmexit, not a page fault. However because writeback happens after the injection, we will write ctxt->eip from L2 into the L1 EIP. We do not write back if an instruction caused an interception vmexit---do the same for page faults. Suggested-by: NGleb Natapov <gleb@kernel.org> Reviewed-by: NGleb Natapov <gleb@kernel.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 03 9月, 2014 6 次提交
-
-
由 Paolo Bonzini 提交于
This is similar to what the EPT code does with the exit qualification. This allows the guest to see a valid value for bits 33:32. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Bit 8 would be the "global" bit, which does not quite make sense for non-leaf page table entries. Intel ignores it; AMD ignores it in PDEs, but reserves it in PDPEs and PML4Es. The SVM test is relying on this behavior, so enforce it. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Tiejun Chen 提交于
Just reuse rsvd_bits() inside kvm_set_mmio_spte_mask() for slightly better code. Signed-off-by: NTiejun Chen <tiejun.chen@intel.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 David Matlack 提交于
The following events can lead to an incorrect KVM_EXIT_MMIO bubbling up to userspace: (1) Guest accesses gpa X without a memory slot. The gfn is cached in struct kvm_vcpu_arch (mmio_gfn). On Intel EPT-enabled hosts, KVM sets the SPTE write-execute-noread so that future accesses cause EPT_MISCONFIGs. (2) Host userspace creates a memory slot via KVM_SET_USER_MEMORY_REGION covering the page just accessed. (3) Guest attempts to read or write to gpa X again. On Intel, this generates an EPT_MISCONFIG. The memory slot generation number that was incremented in (2) would normally take care of this but we fast path mmio faults through quickly_check_mmio_pf(), which only checks the per-vcpu mmio cache. Since we hit the cache, KVM passes a KVM_EXIT_MMIO up to userspace. This patch fixes the issue by using the memslot generation number to validate the mmio cache. Cc: stable@vger.kernel.org Signed-off-by: NDavid Matlack <dmatlack@google.com> [xiaoguangrong: adjust the code to make it simpler for stable-tree fix.] Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Reviewed-by: NDavid Matlack <dmatlack@google.com> Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Tested-by: NDavid Matlack <dmatlack@google.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 David Matlack 提交于
vcpu exits and memslot mutations can run concurrently as long as the vcpu does not aquire the slots mutex. Thus it is theoretically possible for memslots to change underneath a vcpu that is handling an exit. If we increment the memslot generation number again after synchronize_srcu_expedited(), vcpus can safely cache memslot generation without maintaining a single rcu_dereference through an entire vm exit. And much of the x86/kvm code does not maintain a single rcu_dereference of the current memslots during each exit. We can prevent the following case: vcpu (CPU 0) | thread (CPU 1) --------------------------------------------+-------------------------- 1 vm exit | 2 srcu_read_unlock(&kvm->srcu) | 3 decide to cache something based on | old memslots | 4 | change memslots | (increments generation) 5 | synchronize_srcu(&kvm->srcu); 6 retrieve generation # from new memslots | 7 tag cache with new memslot generation | 8 srcu_read_unlock(&kvm->srcu) | ... | <action based on cache occurs even | though the caching decision was based | on the old memslots> | ... | <action *continues* to occur until next | memslot generation change, which may | be never> | | By incrementing the generation after synchronizing with kvm->srcu readers, we ensure that the generation retrieved in (6) will become invalid soon after (8). Keeping the existing increment is not strictly necessary, but we do keep it and just move it for consistency from update_memslots to install_new_memslots. It invalidates old cached MMIOs immediately, instead of having to wait for the end of synchronize_srcu_expedited, which makes the code more clearly correct in case CPU 1 is preempted right after synchronize_srcu() returns. To avoid halving the generation space in SPTEs, always presume that the low bit of the generation is zero when reconstructing a generation number out of an SPTE. This effectively disables MMIO caching in SPTEs during the call to synchronize_srcu_expedited. Using the low bit this way is somewhat like a seqcount---where the protected thing is a cache, and instead of retrying we can simply punt if we observe the low bit to be 1. Cc: stable@vger.kernel.org Signed-off-by: NDavid Matlack <dmatlack@google.com> Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Reviewed-by: NDavid Matlack <dmatlack@google.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
The next patch will give a meaning (a la seqcount) to the low bit of the generation number. Ensure that it matches between kvm->memslots->generation and kvm_current_mmio_generation(). Cc: stable@vger.kernel.org Reviewed-by: NDavid Matlack <dmatlack@google.com> Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 30 8月, 2014 1 次提交
-
-
由 Paolo Bonzini 提交于
The check introduced in commit d7a2a246 (KVM: x86: #GP when attempts to write reserved bits of Variable Range MTRRs, 2014-08-19) will break if the guest maxphyaddr is higher than the host's (which sometimes happens depending on your hardware and how QEMU is configured). To fix this, use cpuid_maxphyaddr similar to how the APIC_BASE MSR does already. Reported-by: NJan Kiszka <jan.kiszka@siemens.com> Tested-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 29 8月, 2014 10 次提交
-
-
由 Radim Krčmář 提交于
In the beggining was on_each_cpu(), which required an unused argument to kvm_arch_ops.hardware_{en,dis}able, but this was soon forgotten. Remove unnecessary arguments that stem from this. Signed-off-by: NRadim KrÄmář <rkrcmar@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Radim Krčmář 提交于
Using static inline is going to save few bytes and cycles. For example on powerpc, the difference is 700 B after stripping. (5 kB before) This patch also deals with two overlooked empty functions: kvm_arch_flush_shadow was not removed from arch/mips/kvm/mips.c 2df72e9b KVM: split kvm_arch_flush_shadow and kvm_arch_sched_in never made it into arch/ia64/kvm/kvm-ia64.c. e790d9ef KVM: add kvm_arch_sched_in Signed-off-by: NRadim KrÄmář <rkrcmar@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Opaque KVM structs are useful for prototypes in asm/kvm_host.h, to avoid "'struct foo' declared inside parameter list" warnings (and consequent breakage due to conflicting types). Move them from individual files to a generic place in linux/kvm_types.h. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
These are not explicitly aligned, and do not require alignment on AVX. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Alex Williamson 提交于
Windows 8.1 guest with NVIDIA driver and GPU fails to boot with an emulation failure. The KVM spew suggests the fault is with lack of movntdq emulation (courtesy of Paolo): Code=02 00 00 b8 08 00 00 00 f3 0f 6f 44 0a f0 f3 0f 6f 4c 0a e0 <66> 0f e7 41 f0 66 0f e7 49 e0 48 83 e9 40 f3 0f 6f 44 0a 10 f3 0f 6f 0c 0a 66 0f e7 41 10 $ as -o a.out .section .text .byte 0x66, 0x0f, 0xe7, 0x41, 0xf0 .byte 0x66, 0x0f, 0xe7, 0x49, 0xe0 $ objdump -d a.out 0: 66 0f e7 41 f0 movntdq %xmm0,-0x10(%rcx) 5: 66 0f e7 49 e0 movntdq %xmm1,-0x20(%rcx) Add the necessary emulation. Signed-off-by: NAlex Williamson <alex.williamson@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Nadav Amit 提交于
Unlike VMCALL, the instructions VMXOFF, VMLAUNCH and VMRESUME should cause a UD exception in real-mode or vm86. However, the emulator considers all these instructions the same for the matter of mode checks, and emulation upon exit due to #UD exception. As a result, the hypervisor behaves incorrectly on vm86 mode. VMXOFF, VMLAUNCH or VMRESUME cause on vm86 exit due to #UD. The hypervisor then emulates these instruction and inject #GP to the guest instead of #UD. This patch creates a new group for these instructions and mark only VMCALL as an instruction which can be emulated. Signed-off-by: NNadav Amit <namit@cs.technion.ac.il> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Sparse reports the following easily fixed warnings: arch/x86/kvm/vmx.c:8795:48: sparse: Using plain integer as NULL pointer arch/x86/kvm/vmx.c:2138:5: sparse: symbol vmx_read_l1_tsc was not declared. Should it be static? arch/x86/kvm/vmx.c:6151:48: sparse: Using plain integer as NULL pointer arch/x86/kvm/vmx.c:8851:6: sparse: symbol vmx_sched_in was not declared. Should it be static? arch/x86/kvm/svm.c:2162:5: sparse: symbol svm_read_l1_tsc was not declared. Should it be static? Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Wanpeng Li 提交于
This patch fix bug https://bugzilla.kernel.org/show_bug.cgi?id=61411 TPR shadow/threshold feature is important to speed up the Windows guest. Besides, it is a must feature for certain VMM. We map virtual APIC page address and TPR threshold from L1 VMCS. If TPR_BELOW_THRESHOLD VM exit is triggered by L2 guest and L1 interested in, we inject it into L1 VMM for handling. Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NWanpeng Li <wanpeng.li@linux.intel.com> [Add PAGE_ALIGNED check, do not write useless virtual APIC page address if TPR shadowing is disabled. - Paolo] Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Wanpeng Li 提交于
Introduce function nested_get_vmcs12_pages() to check the valid of nested apic access page and virtual apic page earlier. Signed-off-by: NWanpeng Li <wanpeng.li@linux.intel.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Christian Borntraeger 提交于
commit ab3f285f ("KVM: s390/mm: try a cow on read only pages for key ops")' misaligned a code block. Let's fixup the indentation. Reported-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 26 8月, 2014 3 次提交
-
-
由 Martin Schwidefsky 提交于
The radix tree rework removed all code that uses the gmap_rmap and gmap_pgtable data structures. Remove these outdated definitions. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Add an addressing limit to the gmap address spaces and only allocate the page table levels that are needed for the given limit. The limit is fixed and can not be changed after a gmap has been created. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Store the target address for the gmap segments in a radix tree instead of using invalid segment table entries. gmap_translate becomes a simple radix_tree_lookup, gmap_fault is split into the address translation with gmap_translate and the part that does the linking of the gmap shadow page table with the process page table. A second radix tree is used to keep the pointers to the segment table entries for segments that are mapped in the guest address space. On unmap of a segment the pointer is retrieved from the radix tree and is used to carry out the segment invalidation in the gmap shadow page table. As the radix tree can only store one pointer, each host segment may only be mapped to exactly one guest location. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
- 25 8月, 2014 5 次提交
-
-
由 Paolo Bonzini 提交于
Fix commit 7b46268d, which mistakenly included the new tracepoint under #ifdef CONFIG_X86_64. Reported-by: NSabrina Dubroca <sd@queasysnail.net> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Martin Schwidefsky 提交于
Make the order of arguments for the gmap calls more consistent, if the gmap pointer is passed it is always the first argument. In addition distinguish between guest address and user address by naming the variables gaddr for a guest address and vmaddr for a user address. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Revert git commit c3a23b9874c1 ("remove unnecessary parameter from gmap_do_ipte_notify"). Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Revert git commit 1b7fd6952063 ("remove unecessary parameter from pgste_ipte_notify") Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Jens Freimann 提交于
The kvm lock protects us against vcpus going away, but they only go away when the virtual machine is shut down. We don't need this mutex here, so let's get rid of it. Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-