When mount fails to read trees like fs tree, checksum tree, extent
tree, etc, there is not enough information about where went wrong.

With this, messages like

"BTRFS warning (device sdf): failed to read root (objectid=7): -5"

would help us a bit.
Signed-off-by: NLiu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

All users pass a local unsigned int and not the __uXX types that are
supposed to be used for userspace interfaces.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The current calls are unclear in what way btrfs_dev_replace_lock takes
the locks, so drop the argument, split the helpers and use similar
naming as for read and write locks.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The fs_mutex has been killed in 2008, a2135011 ("Btrfs: Replace
the big fs_mutex with a collection of other locks"), still remembered in
some comments.

We don't have any extra needs for locking in the ACL handlers.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The show_devname callback is used to print device name in
/proc/self/mounts, we need to traverse the device list consistently and
read the name that's copied to a seq buffer so we don't need further
locking.

If the first device is being deleted at the same time, the RCU will
allow us to read the device name, though it will become stale right
after the RCU protection ends. This is unavoidable and the user can
expect that the device will disappear from the filesystem's list at some
point.

The device_list_mutex was pretty heavy as it is used eg. for writing
superblock and a few other IO related contexts. This can stall any
application that reads the proc file for no reason.
Reviewed-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Once there was a simple int force_cow that was used with the plain
barriers, and then converted to a bit, so we should use the appropriate
barrier helper.

Other variables in the complex if condition do not depend on a barrier,
so we should be fine in case the atomic barrier becomes a no-op.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Using lockdep_assert_held is preferred, replace mutex_is_locked.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Using lockdep_assert_held is preferred, replace assert_spin_locked.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We have several reports about node pointer points to incorrect child
tree blocks, which could have even wrong owner and level but still with
valid generation and checksum.

Although btrfs check could handle it and print error message like:
leaf parent key incorrect 60670574592

Kernel doesn't have enough check on this type of corruption correctly.
At least add such check to read_tree_block() and btrfs_read_buffer(),
where we need two new parameters @level and @first_key to verify the
child tree block.

The new @level check is mandatory and all call sites are already
modified to extract expected level from its call chain.

While @first_key is optional, the following call sites are skipping such
check:
1) Root node/leaf
   As ROOT_ITEM doesn't contain the first key, skip @first_key check.
2) Direct backref
   Only parent bytenr and level is known and we need to resolve the key
   all by ourselves, skip @first_key check.

Another note of this verification is, it needs extra info from nodeptr
or ROOT_ITEM, so it can't fit into current tree-checker framework, which
is limited to node/leaf boundary.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The extent tree of the test fs is like the following:

 BTRFS info (device (null)): leaf 16327509003777336587 total ptrs 1 free space 3919
  item 0 key (4096 168 4096) itemoff 3944 itemsize 51
          extent refs 1 gen 1 flags 2
          tree block key (68719476736 0 0) level 1
                                           ^^^^^^^
          ref#0: tree block backref root 5

And it's using an empty tree for fs tree, so there is no way that its
level can be 1.

For REAL (created by mkfs) fs tree backref with no skinny metadata, the
result should look like:

 item 3 key (30408704 EXTENT_ITEM 4096) itemoff 3845 itemsize 51
         refs 1 gen 4 flags TREE_BLOCK
         tree block key (256 INODE_ITEM 0) level 0
                                           ^^^^^^^
         tree block backref root 5

Fix the level to 0, so it won't break later tree level checker.

Fixes: faa2dbf0 ("Btrfs: add sanity tests for new qgroup accounting code")
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When logging an inode, at tree-log.c:copy_items(), if we call
btrfs_next_leaf() at the loop which checks for the need to log holes, we
need to make sure copy_items() returns the value 1 to its caller and
not 0 (on success). This is because the path the caller passed was
released and is now different from what is was before, and the caller
expects a return value of 0 to mean both success and that the path
has not changed, while a return value of 1 means both success and
signals the caller that it can not reuse the path, it has to perform
another tree search.

Even though this is a case that should not be triggered on normal
circumstances or very rare at least, its consequences can be very
unpredictable (especially when replaying a log tree).

Fixes: 16e7549f ("Btrfs: incompatible format change to remove hole extents")
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When we have the no-holes mode enabled and fsync a file after punching a
hole in it, we can end up not logging the whole hole range in the log tree.
This happens if the file has extent items that span more than one leaf and
we punch a hole that covers a range that starts in a leaf but does not go
beyond the offset of the first extent in the next leaf.

Example:

  $ mkfs.btrfs -f -O no-holes -n 65536 /dev/sdb
  $ mount /dev/sdb /mnt
  $ for ((i = 0; i <= 831; i++)); do
	offset=$((i * 2 * 256 * 1024))
	xfs_io -f -c "pwrite -S 0xab -b 256K $offset 256K" \
		/mnt/foobar >/dev/null
    done
  $ sync

  # We now have 2 leafs in our filesystem fs tree, the first leaf has an
  # item corresponding the extent at file offset 216530944 and the second
  # leaf has a first item corresponding to the extent at offset 217055232.
  # Now we punch a hole that partially covers the range of the extent at
  # offset 216530944 but does go beyond the offset 217055232.

  $ xfs_io -c "fpunch $((216530944 + 128 * 1024 - 4000)) 256K" /mnt/foobar
  $ xfs_io -c "fsync" /mnt/foobar

  <power fail>

  # mount to replay the log
  $ mount /dev/sdb /mnt

  # Before this patch, only the subrange [216658016, 216662016[ (length of
  # 4000 bytes) was logged, leaving an incorrect file layout after log
  # replay.

Fix this by checking if there is a hole between the last extent item that
we processed and the first extent item in the next leaf, and if there is
one, log an explicit hole extent item.

Fixes: 16e7549f ("Btrfs: incompatible format change to remove hole extents")
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We have a nice helper to do proper casting of a qgroup to a ulist aux
value. And several places that could make use of it.
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This reverts commit 48a89bc4.

The idea to commit transaction and free some space after hitting qgroup
limit is good, although the problem is it can easily cause deadlocks.

One deadlock example is caused by trying to flush data while still
holding it:

Call Trace:
 __schedule+0x49d/0x10f0
 schedule+0xc6/0x290
 schedule_timeout+0x187/0x1c0
 wait_for_completion+0x204/0x3a0
 btrfs_wait_ordered_extents+0xa40/0xaf0 [btrfs]
 qgroup_reserve+0x913/0xa10 [btrfs]
 btrfs_qgroup_reserve_data+0x3ef/0x580 [btrfs]
 btrfs_check_data_free_space+0x96/0xd0 [btrfs]
 __btrfs_buffered_write+0x3ac/0xd40 [btrfs]
 btrfs_file_write_iter+0x62a/0xba0 [btrfs]
 __vfs_write+0x320/0x430
 vfs_write+0x107/0x270
 SyS_write+0xbf/0x150
 do_syscall_64+0x1b0/0x3d0
 entry_SYSCALL64_slow_path+0x25/0x25

Another can be caused by trying to commit one transaction while nesting
with trans handle held by ourselves:

btrfs_start_transaction()
|- btrfs_qgroup_reserve_meta_pertrans()
   |- qgroup_reserve()
      |- btrfs_join_transaction()
      |- btrfs_commit_transaction()

The retry is causing more problems than exppected when limit is enabled.
At least a graceful EDQUOT is way better than deadlock.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Now trace_qgroup_meta_reserve() will have extra type parameter.

And introduce two new trace events:

1) trace_qgroup_meta_free_all_pertrans()
   For btrfs_qgroup_free_meta_all_pertrans()

2) trace_qgroup_meta_convert()
   For btrfs_qgroup_convert_reserved_meta()
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

For quota disabled->enable case, it's possible that at reservation time
quota was not enabled so no bytes were really reserved, while at release
time, quota was enabled so we will try to release some bytes we didn't
really own.

Such situation can cause metadata reserveation underflow, for both types,
also less possible for per-trans type since quota enable will commit
transaction.

To address this, record qgroup meta reserved bytes into
root::qgroup_meta_rsv_pertrans and ::prealloc.
So at releasing time we won't free any bytes we didn't reserve.

For DATA, it's already handled by io_tree, so nothing needs to be done
there.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Quite similar for delalloc, some modification to delayed-inode and
delayed-item reservation.  Also needs extra parameter for release case
to distinguish normal release and error release.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Before this patch, btrfs qgroup is mixing per-transcation meta rsv with
preallocated meta rsv, making it quite easy to underflow qgroup meta
reservation.

Since we have the new qgroup meta rsv types, apply it to delalloc
reservation.

Now for delalloc, most of its reserved space will use META_PREALLOC qgroup
rsv type.

And for callers reducing outstanding extent like btrfs_finish_ordered_io(),
they will convert corresponding META_PREALLOC reservation to
META_PERTRANS.

This is mainly due to the fact that current qgroup numbers will only be
updated in btrfs_commit_transaction(), that's to say if we don't keep
such placeholder reservation, we can exceed qgroup limitation.

And for callers freeing outstanding extent in error handler, we will
just free META_PREALLOC bytes.

This behavior makes callers of btrfs_qgroup_release_meta() or
btrfs_qgroup_convert_meta() to be aware of which type they are.
So in this patch, btrfs_delalloc_release_metadata() and its callers get
an extra parameter to info qgroup to do correct meta convert/release.

The good news is, even we use the wrong type (convert or free), it won't
cause obvious bug, as prealloc type is always in good shape, and the
type only affects how per-trans meta is increased or not.

So the worst case will be at most metadata limitation can be sometimes
exceeded (no convert at all) or metadata limitation is reached too soon
(no free at all).
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

For meta_prealloc reservation users, after btrfs_join_transaction()
caller will modify tree so part (or even all) meta_prealloc reservation
should be converted to meta_pertrans until transaction commit time.

This patch introduces a new function,
btrfs_qgroup_convert_reserved_meta() to do this for META_PREALLOC
reservation user.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Since qgroup has seperate metadata reservation types now, we can
completely get rid of the old root->qgroup_meta_rsv, which mostly acts
as current META_PERTRANS reservation type.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Btrfs uses 2 different methods to reseve metadata qgroup space.

1) Reserve at btrfs_start_transaction() time
   This is quite straightforward, caller will use the trans handler
   allocated to modify b-trees.

   In this case, reserved metadata should be kept until qgroup numbers
   are updated.

2) Reserve by using block_rsv first, and later btrfs_join_transaction()
   This is more complicated, caller will reserve space using block_rsv
   first, and then later call btrfs_join_transaction() to get a trans
   handle.

   In this case, before we modify trees, the reserved space can be
   modified on demand, and after btrfs_join_transaction(), such reserved
   space should also be kept until qgroup numbers are updated.

Since these two types behave differently, split the original "META"
reservation type into 2 sub-types:

  META_PERTRANS:
    For above case 1)

  META_PREALLOC:
    For reservations that happened before btrfs_join_transaction() of
    case 2)

NOTE: This patch will only convert existing qgroup meta reservation
callers according to its situation, not ensuring all callers are at
correct timing.
Such fix will be added in later patches.
Signed-off-by: NQu Wenruo <wqu@suse.com>
[ update comments ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

So qgroup is switched to new separate types reservation system.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When modifying qgroup relationship, for qgroup which only owns exclusive
extents, we will go through quick update path.

In this path, we will add/subtract exclusive and reference number for
parent qgroup, since the source (child) qgroup only has exclusive
extents, destination (parent) qgroup will also own or lose those extents
exclusively.

The same should be the same for reservation, since later reservation
adding/releasing will also affect parent qgroup, without the reservation
carried from child, parent will underflow reservation or have dead
reservation which will never be freed.

However original code doesn't do the same thing for reservation.
It handles qgroup reservation quite differently:

It removes qgroup reservation, as it's allocating space from the
reserved qgroup for relationship adding.
But does nothing for qgroup reservation if we're removing a qgroup
relationship.

According to the original code, it looks just like because we're adding
qgroup->rfer, the code assumes we're writing new data, so it's follows
the normal write routine, by reducing qgroup->reserved and adding
qgroup->rfer/excl.

This old behavior is wrong, and should be fixed to follow the same
excl/rfer behavior.

Just fix it by using the correct behavior described above.

Fixes: 31193213 ("Btrfs: qgroup: Introduce a may_use to account space_info->bytes_may_use.")
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Since most callers of qgroup_reserve() are already defined by type,
converting qgroup_reserve() is quite an easy work.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Introduce helpers to:

1) Get total reserved space
   For limit calculation
2) Add/release reserved space for given type
   With underflow detection and warning
3) Add/release reserved space according to child qgroup
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Instead of single qgroup->reserved, use a new structure btrfs_qgroup_rsv
to store different types of reservation.

This patch only updates the header needed to compile.
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

btrfs_orphan_add() has had this case commented out since it was first
introduced in commit d68fc57b ("Btrfs: Metadata reservation for
orphan inodes"). Most of the orphan cleanup code has been rewritten
since then, so it's safe to say that this code isn't needed.
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
[ switch to bool ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Signed-off-by: NTomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Any time the first block group of a new type is created, we add a new
kobject to sysfs to hold the attributes for that type.  Kobject-internal
allocations always use GFP_KERNEL, making them prone to fs-reclaim races.
While it appears as if this can occur any time a block group is created,
the only times the first block group of a new type can be created in
memory is at mount and when we create the first new block group during
raid conversion.

This patch adds a new list to track pending kobject additions and then
handles them after we do chunk relocation.  Between relocating the
target chunk (or forcing allocation of a new chunk in the case of data)
and removing the old chunk, we're in a safe place for fs-reclaim to
occur.  We're holding the volume mutex, which is already held across
page faults, and the delete_unused_bgs_mutex, which will only stall
the cleaner thread.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Since commit 2be12ef7 (btrfs: Separate space_info create/update), we've
separated out the creation and updating of the space info structures.
That commit was a straightforward refactoring of the two parts of
update_space_info, but we can go a step further.  Since commits
c59021f8 (Btrfs: fix OOPS of empty filesystem after balance) and
b742bb82 (Btrfs: Link block groups of different raid types), we know
that the space_info structures will be created at mount and there will
only ever be, at most, three of them.

This patch cleans out the create_space_info calls after __find_space_info
returns NULL since __find_space_info *can't* return NULL.

The initial cause for reviewing this was the kobject_add calls from
create_space_info occuring in sites where fs-reclaim wasn't allowed.  Now
we are certain they occur only early in the mount process and are safe.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Rebuild on missing device is as same as recover, after it's done, rbio
has data which is consistent with on-disk data, so it can be cached to
avoid further reads.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NLiu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

While running btrfs/011, I hit the following lockdep splat.

This is the important bit:
   pcpu_alloc+0x1ac/0x5e0
   __percpu_counter_init+0x4e/0xb0
   btrfs_init_fs_root+0x99/0x1c0 [btrfs]
   btrfs_get_fs_root.part.54+0x5b/0x150 [btrfs]
   resolve_indirect_refs+0x130/0x830 [btrfs]
   find_parent_nodes+0x69e/0xff0 [btrfs]
   btrfs_find_all_roots_safe+0xa0/0x110 [btrfs]
   btrfs_find_all_roots+0x50/0x70 [btrfs]
   btrfs_qgroup_prepare_account_extents+0x53/0x90 [btrfs]
   btrfs_commit_transaction+0x3ce/0x9b0 [btrfs]

The percpu_counter_init call in btrfs_alloc_subvolume_writers
uses GFP_KERNEL, which we can't do during transaction commit.

This switches it to GFP_NOFS.

========================================================
WARNING: possible irq lock inversion dependency detected
4.12.14-kvmsmall #8 Tainted: G        W
--------------------------------------------------------
kswapd0/50 just changed the state of lock:
 (&delayed_node->mutex){+.+.-.}, at: [<ffffffffc06994fa>] __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
but this lock took another, RECLAIM_FS-unsafe lock in the past:
 (pcpu_alloc_mutex){+.+.+.}

and interrupts could create inverse lock ordering between them.

other info that might help us debug this:
Chain exists of:
  &delayed_node->mutex --> &found->groups_sem --> pcpu_alloc_mutex

 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(pcpu_alloc_mutex);
                               local_irq_disable();
                               lock(&delayed_node->mutex);
                               lock(&found->groups_sem);
  <Interrupt>
    lock(&delayed_node->mutex);

 *** DEADLOCK ***

2 locks held by kswapd0/50:
 #0:  (shrinker_rwsem){++++..}, at: [<ffffffff811dc11f>] shrink_slab+0x7f/0x5b0
 #1:  (&type->s_umount_key#30){+++++.}, at: [<ffffffff8126dec6>] trylock_super+0x16/0x50

the shortest dependencies between 2nd lock and 1st lock:
   -> (pcpu_alloc_mutex){+.+.+.} ops: 4904 {
      HARDIRQ-ON-W at:
                          __mutex_lock+0x4e/0x8c0
                          pcpu_alloc+0x1ac/0x5e0
                          alloc_kmem_cache_cpus.isra.70+0x25/0xa0
                          __do_tune_cpucache+0x2c/0x220
                          do_tune_cpucache+0x26/0xc0
                          enable_cpucache+0x6d/0xf0
                          kmem_cache_init_late+0x42/0x75
                          start_kernel+0x343/0x4cb
                          x86_64_start_kernel+0x127/0x134
                          secondary_startup_64+0xa5/0xb0
      SOFTIRQ-ON-W at:
                          __mutex_lock+0x4e/0x8c0
                          pcpu_alloc+0x1ac/0x5e0
                          alloc_kmem_cache_cpus.isra.70+0x25/0xa0
                          __do_tune_cpucache+0x2c/0x220
                          do_tune_cpucache+0x26/0xc0
                          enable_cpucache+0x6d/0xf0
                          kmem_cache_init_late+0x42/0x75
                          start_kernel+0x343/0x4cb
                          x86_64_start_kernel+0x127/0x134
                          secondary_startup_64+0xa5/0xb0
      RECLAIM_FS-ON-W at:
                             __kmalloc+0x47/0x310
                             pcpu_extend_area_map+0x2b/0xc0
                             pcpu_alloc+0x3ec/0x5e0
                             alloc_kmem_cache_cpus.isra.70+0x25/0xa0
                             __do_tune_cpucache+0x2c/0x220
                             do_tune_cpucache+0x26/0xc0
                             enable_cpucache+0x6d/0xf0
                             __kmem_cache_create+0x1bf/0x390
                             create_cache+0xba/0x1b0
                             kmem_cache_create+0x1f8/0x2b0
                             ksm_init+0x6f/0x19d
                             do_one_initcall+0x50/0x1b0
                             kernel_init_freeable+0x201/0x289
                             kernel_init+0xa/0x100
                             ret_from_fork+0x3a/0x50
      INITIAL USE at:
                         __mutex_lock+0x4e/0x8c0
                         pcpu_alloc+0x1ac/0x5e0
                         alloc_kmem_cache_cpus.isra.70+0x25/0xa0
                         setup_cpu_cache+0x2f/0x1f0
                         __kmem_cache_create+0x1bf/0x390
                         create_boot_cache+0x8b/0xb1
                         kmem_cache_init+0xa1/0x19e
                         start_kernel+0x270/0x4cb
                         x86_64_start_kernel+0x127/0x134
                         secondary_startup_64+0xa5/0xb0
    }
    ... key      at: [<ffffffff821d8e70>] pcpu_alloc_mutex+0x70/0xa0
    ... acquired at:
   pcpu_alloc+0x1ac/0x5e0
   __percpu_counter_init+0x4e/0xb0
   btrfs_init_fs_root+0x99/0x1c0 [btrfs]
   btrfs_get_fs_root.part.54+0x5b/0x150 [btrfs]
   resolve_indirect_refs+0x130/0x830 [btrfs]
   find_parent_nodes+0x69e/0xff0 [btrfs]
   btrfs_find_all_roots_safe+0xa0/0x110 [btrfs]
   btrfs_find_all_roots+0x50/0x70 [btrfs]
   btrfs_qgroup_prepare_account_extents+0x53/0x90 [btrfs]
   btrfs_commit_transaction+0x3ce/0x9b0 [btrfs]
   transaction_kthread+0x176/0x1b0 [btrfs]
   kthread+0x102/0x140
   ret_from_fork+0x3a/0x50

  -> (&fs_info->commit_root_sem){++++..} ops: 1566382 {
     HARDIRQ-ON-W at:
                        down_write+0x3e/0xa0
                        cache_block_group+0x287/0x420 [btrfs]
                        find_free_extent+0x106c/0x12d0 [btrfs]
                        btrfs_reserve_extent+0xd8/0x170 [btrfs]
                        cow_file_range.isra.66+0x133/0x470 [btrfs]
                        run_delalloc_range+0x121/0x410 [btrfs]
                        writepage_delalloc.isra.50+0xfe/0x180 [btrfs]
                        __extent_writepage+0x19a/0x360 [btrfs]
                        extent_write_cache_pages.constprop.56+0x249/0x3e0 [btrfs]
                        extent_writepages+0x4d/0x60 [btrfs]
                        do_writepages+0x1a/0x70
                        __filemap_fdatawrite_range+0xa7/0xe0
                        btrfs_rename+0x5ee/0xdb0 [btrfs]
                        vfs_rename+0x52a/0x7e0
                        SyS_rename+0x351/0x3b0
                        do_syscall_64+0x79/0x1e0
                        entry_SYSCALL_64_after_hwframe+0x42/0xb7
     HARDIRQ-ON-R at:
                        down_read+0x35/0x90
                        caching_thread+0x57/0x560 [btrfs]
                        normal_work_helper+0x1c0/0x5e0 [btrfs]
                        process_one_work+0x1e0/0x5c0
                        worker_thread+0x44/0x390
                        kthread+0x102/0x140
                        ret_from_fork+0x3a/0x50
     SOFTIRQ-ON-W at:
                        down_write+0x3e/0xa0
                        cache_block_group+0x287/0x420 [btrfs]
                        find_free_extent+0x106c/0x12d0 [btrfs]
                        btrfs_reserve_extent+0xd8/0x170 [btrfs]
                        cow_file_range.isra.66+0x133/0x470 [btrfs]
                        run_delalloc_range+0x121/0x410 [btrfs]
                        writepage_delalloc.isra.50+0xfe/0x180 [btrfs]
                        __extent_writepage+0x19a/0x360 [btrfs]
                        extent_write_cache_pages.constprop.56+0x249/0x3e0 [btrfs]
                        extent_writepages+0x4d/0x60 [btrfs]
                        do_writepages+0x1a/0x70
                        __filemap_fdatawrite_range+0xa7/0xe0
                        btrfs_rename+0x5ee/0xdb0 [btrfs]
                        vfs_rename+0x52a/0x7e0
                        SyS_rename+0x351/0x3b0
                        do_syscall_64+0x79/0x1e0
                        entry_SYSCALL_64_after_hwframe+0x42/0xb7
     SOFTIRQ-ON-R at:
                        down_read+0x35/0x90
                        caching_thread+0x57/0x560 [btrfs]
                        normal_work_helper+0x1c0/0x5e0 [btrfs]
                        process_one_work+0x1e0/0x5c0
                        worker_thread+0x44/0x390
                        kthread+0x102/0x140
                        ret_from_fork+0x3a/0x50
     INITIAL USE at:
                       down_write+0x3e/0xa0
                       cache_block_group+0x287/0x420 [btrfs]
                       find_free_extent+0x106c/0x12d0 [btrfs]
                       btrfs_reserve_extent+0xd8/0x170 [btrfs]
                       cow_file_range.isra.66+0x133/0x470 [btrfs]
                       run_delalloc_range+0x121/0x410 [btrfs]
                       writepage_delalloc.isra.50+0xfe/0x180 [btrfs]
                       __extent_writepage+0x19a/0x360 [btrfs]
                       extent_write_cache_pages.constprop.56+0x249/0x3e0 [btrfs]
                       extent_writepages+0x4d/0x60 [btrfs]
                       do_writepages+0x1a/0x70
                       __filemap_fdatawrite_range+0xa7/0xe0
                       btrfs_rename+0x5ee/0xdb0 [btrfs]
                       vfs_rename+0x52a/0x7e0
                       SyS_rename+0x351/0x3b0
                       do_syscall_64+0x79/0x1e0
                       entry_SYSCALL_64_after_hwframe+0x42/0xb7
   }
   ... key      at: [<ffffffffc0729578>] __key.61970+0x0/0xfffffffffff9aa88 [btrfs]
   ... acquired at:
   cache_block_group+0x287/0x420 [btrfs]
   find_free_extent+0x106c/0x12d0 [btrfs]
   btrfs_reserve_extent+0xd8/0x170 [btrfs]
   btrfs_alloc_tree_block+0x12f/0x4c0 [btrfs]
   btrfs_create_tree+0xbb/0x2a0 [btrfs]
   btrfs_create_uuid_tree+0x37/0x140 [btrfs]
   open_ctree+0x23c0/0x2660 [btrfs]
   btrfs_mount+0xd36/0xf90 [btrfs]
   mount_fs+0x3a/0x160
   vfs_kern_mount+0x66/0x150
   btrfs_mount+0x18c/0xf90 [btrfs]
   mount_fs+0x3a/0x160
   vfs_kern_mount+0x66/0x150
   do_mount+0x1c1/0xcc0
   SyS_mount+0x7e/0xd0
   do_syscall_64+0x79/0x1e0
   entry_SYSCALL_64_after_hwframe+0x42/0xb7

 -> (&found->groups_sem){++++..} ops: 2134587 {
    HARDIRQ-ON-W at:
                      down_write+0x3e/0xa0
                      __link_block_group+0x34/0x130 [btrfs]
                      btrfs_read_block_groups+0x33d/0x7b0 [btrfs]
                      open_ctree+0x2054/0x2660 [btrfs]
                      btrfs_mount+0xd36/0xf90 [btrfs]
                      mount_fs+0x3a/0x160
                      vfs_kern_mount+0x66/0x150
                      btrfs_mount+0x18c/0xf90 [btrfs]
                      mount_fs+0x3a/0x160
                      vfs_kern_mount+0x66/0x150
                      do_mount+0x1c1/0xcc0
                      SyS_mount+0x7e/0xd0
                      do_syscall_64+0x79/0x1e0
                      entry_SYSCALL_64_after_hwframe+0x42/0xb7
    HARDIRQ-ON-R at:
                      down_read+0x35/0x90
                      btrfs_calc_num_tolerated_disk_barrier_failures+0x113/0x1f0 [btrfs]
                      open_ctree+0x207b/0x2660 [btrfs]
                      btrfs_mount+0xd36/0xf90 [btrfs]
                      mount_fs+0x3a/0x160
                      vfs_kern_mount+0x66/0x150
                      btrfs_mount+0x18c/0xf90 [btrfs]
                      mount_fs+0x3a/0x160
                      vfs_kern_mount+0x66/0x150
                      do_mount+0x1c1/0xcc0
                      SyS_mount+0x7e/0xd0
                      do_syscall_64+0x79/0x1e0
                      entry_SYSCALL_64_after_hwframe+0x42/0xb7
    SOFTIRQ-ON-W at:
                      down_write+0x3e/0xa0
                      __link_block_group+0x34/0x130 [btrfs]
                      btrfs_read_block_groups+0x33d/0x7b0 [btrfs]
                      open_ctree+0x2054/0x2660 [btrfs]
                      btrfs_mount+0xd36/0xf90 [btrfs]
                      mount_fs+0x3a/0x160
                      vfs_kern_mount+0x66/0x150
                      btrfs_mount+0x18c/0xf90 [btrfs]
                      mount_fs+0x3a/0x160
                      vfs_kern_mount+0x66/0x150
                      do_mount+0x1c1/0xcc0
                      SyS_mount+0x7e/0xd0
                      do_syscall_64+0x79/0x1e0
                      entry_SYSCALL_64_after_hwframe+0x42/0xb7
    SOFTIRQ-ON-R at:
                      down_read+0x35/0x90
                      btrfs_calc_num_tolerated_disk_barrier_failures+0x113/0x1f0 [btrfs]
                      open_ctree+0x207b/0x2660 [btrfs]
                      btrfs_mount+0xd36/0xf90 [btrfs]
                      mount_fs+0x3a/0x160
                      vfs_kern_mount+0x66/0x150
                      btrfs_mount+0x18c/0xf90 [btrfs]
                      mount_fs+0x3a/0x160
                      vfs_kern_mount+0x66/0x150
                      do_mount+0x1c1/0xcc0
                      SyS_mount+0x7e/0xd0
                      do_syscall_64+0x79/0x1e0
                      entry_SYSCALL_64_after_hwframe+0x42/0xb7
    INITIAL USE at:
                     down_write+0x3e/0xa0
                     __link_block_group+0x34/0x130 [btrfs]
                     btrfs_read_block_groups+0x33d/0x7b0 [btrfs]
                     open_ctree+0x2054/0x2660 [btrfs]
                     btrfs_mount+0xd36/0xf90 [btrfs]
                     mount_fs+0x3a/0x160
                     vfs_kern_mount+0x66/0x150
                     btrfs_mount+0x18c/0xf90 [btrfs]
                     mount_fs+0x3a/0x160
                     vfs_kern_mount+0x66/0x150
                     do_mount+0x1c1/0xcc0
                     SyS_mount+0x7e/0xd0
                     do_syscall_64+0x79/0x1e0
                     entry_SYSCALL_64_after_hwframe+0x42/0xb7
  }
  ... key      at: [<ffffffffc0729488>] __key.59101+0x0/0xfffffffffff9ab78 [btrfs]
  ... acquired at:
   find_free_extent+0xcb4/0x12d0 [btrfs]
   btrfs_reserve_extent+0xd8/0x170 [btrfs]
   btrfs_alloc_tree_block+0x12f/0x4c0 [btrfs]
   __btrfs_cow_block+0x110/0x5b0 [btrfs]
   btrfs_cow_block+0xd7/0x290 [btrfs]
   btrfs_search_slot+0x1f6/0x960 [btrfs]
   btrfs_lookup_inode+0x2a/0x90 [btrfs]
   __btrfs_update_delayed_inode+0x65/0x210 [btrfs]
   btrfs_commit_inode_delayed_inode+0x121/0x130 [btrfs]
   btrfs_evict_inode+0x3fe/0x6a0 [btrfs]
   evict+0xc4/0x190
   __dentry_kill+0xbf/0x170
   dput+0x2ae/0x2f0
   SyS_rename+0x2a6/0x3b0
   do_syscall_64+0x79/0x1e0
   entry_SYSCALL_64_after_hwframe+0x42/0xb7

-> (&delayed_node->mutex){+.+.-.} ops: 5580204 {
   HARDIRQ-ON-W at:
                    __mutex_lock+0x4e/0x8c0
                    btrfs_delayed_update_inode+0x46/0x6e0 [btrfs]
                    btrfs_update_inode+0x83/0x110 [btrfs]
                    btrfs_dirty_inode+0x62/0xe0 [btrfs]
                    touch_atime+0x8c/0xb0
                    do_generic_file_read+0x818/0xb10
                    __vfs_read+0xdc/0x150
                    vfs_read+0x8a/0x130
                    SyS_read+0x45/0xa0
                    do_syscall_64+0x79/0x1e0
                    entry_SYSCALL_64_after_hwframe+0x42/0xb7
   SOFTIRQ-ON-W at:
                    __mutex_lock+0x4e/0x8c0
                    btrfs_delayed_update_inode+0x46/0x6e0 [btrfs]
                    btrfs_update_inode+0x83/0x110 [btrfs]
                    btrfs_dirty_inode+0x62/0xe0 [btrfs]
                    touch_atime+0x8c/0xb0
                    do_generic_file_read+0x818/0xb10
                    __vfs_read+0xdc/0x150
                    vfs_read+0x8a/0x130
                    SyS_read+0x45/0xa0
                    do_syscall_64+0x79/0x1e0
                    entry_SYSCALL_64_after_hwframe+0x42/0xb7
   IN-RECLAIM_FS-W at:
                       __mutex_lock+0x4e/0x8c0
                       __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
                       btrfs_evict_inode+0x22c/0x6a0 [btrfs]
                       evict+0xc4/0x190
                       dispose_list+0x35/0x50
                       prune_icache_sb+0x42/0x50
                       super_cache_scan+0x139/0x190
                       shrink_slab+0x262/0x5b0
                       shrink_node+0x2eb/0x2f0
                       kswapd+0x2eb/0x890
                       kthread+0x102/0x140
                       ret_from_fork+0x3a/0x50
   INITIAL USE at:
                   __mutex_lock+0x4e/0x8c0
                   btrfs_delayed_update_inode+0x46/0x6e0 [btrfs]
                   btrfs_update_inode+0x83/0x110 [btrfs]
                   btrfs_dirty_inode+0x62/0xe0 [btrfs]
                   touch_atime+0x8c/0xb0
                   do_generic_file_read+0x818/0xb10
                   __vfs_read+0xdc/0x150
                   vfs_read+0x8a/0x130
                   SyS_read+0x45/0xa0
                   do_syscall_64+0x79/0x1e0
                   entry_SYSCALL_64_after_hwframe+0x42/0xb7
 }
 ... key      at: [<ffffffffc072d488>] __key.56935+0x0/0xfffffffffff96b78 [btrfs]
 ... acquired at:
   __lock_acquire+0x264/0x11c0
   lock_acquire+0xbd/0x1e0
   __mutex_lock+0x4e/0x8c0
   __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
   btrfs_evict_inode+0x22c/0x6a0 [btrfs]
   evict+0xc4/0x190
   dispose_list+0x35/0x50
   prune_icache_sb+0x42/0x50
   super_cache_scan+0x139/0x190
   shrink_slab+0x262/0x5b0
   shrink_node+0x2eb/0x2f0
   kswapd+0x2eb/0x890
   kthread+0x102/0x140
   ret_from_fork+0x3a/0x50

stack backtrace:
CPU: 1 PID: 50 Comm: kswapd0 Tainted: G        W        4.12.14-kvmsmall #8 SLE15 (unreleased)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Call Trace:
 dump_stack+0x78/0xb7
 print_irq_inversion_bug.part.38+0x19f/0x1aa
 check_usage_forwards+0x102/0x120
 ? ret_from_fork+0x3a/0x50
 ? check_usage_backwards+0x110/0x110
 mark_lock+0x16c/0x270
 __lock_acquire+0x264/0x11c0
 ? pagevec_lookup_entries+0x1a/0x30
 ? truncate_inode_pages_range+0x2b3/0x7f0
 lock_acquire+0xbd/0x1e0
 ? __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
 __mutex_lock+0x4e/0x8c0
 ? __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
 ? __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
 ? btrfs_evict_inode+0x1f6/0x6a0 [btrfs]
 __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
 btrfs_evict_inode+0x22c/0x6a0 [btrfs]
 evict+0xc4/0x190
 dispose_list+0x35/0x50
 prune_icache_sb+0x42/0x50
 super_cache_scan+0x139/0x190
 shrink_slab+0x262/0x5b0
 shrink_node+0x2eb/0x2f0
 kswapd+0x2eb/0x890
 kthread+0x102/0x140
 ? mem_cgroup_shrink_node+0x2c0/0x2c0
 ? kthread_create_on_node+0x40/0x40
 ret_from_fork+0x3a/0x50
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Reviewed-by: NLiu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Drop optimal argument from the function find_live_mirror() as we can
deduce it in the function itself. Also rename optimal to
preferred_mirror.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Obtain the stripes info from the map directly and so no need
to pass it as an argument.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

It's provided by transaction handle.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

It's provided by the transaction handle.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

It's provided by the transaction handle.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

It's provided by the transaction handle.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Added by 08e007d2 ("Btrfs: improve the noflush reservation") and
made redundant by 17024ad0 ("Btrfs: fix early ENOSPC due to
delalloc").
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>