Commit d50f4630 ("arm: dts: Remove p1010-flexcan compatible from imx
series dts") removed the fallback compatible "fsl,p1010-flexcan" from
the imx device trees. As the flexcan cores on i.MX25, i.MX35 and i.MX53
are identical, introduce the first as fallback for the two latter ones.

Fixes: d50f4630 ("arm: dts: Remove p1010-flexcan compatible from imx series dts")
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: linux-stable <stable@vger.kernel.org> # >= v4.16
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

The 66AK2G evm has support for dcan.
Add nodes and pinmuxes for dcan0 and dcan1.
Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>

The U8540 was an evolved version of the U8500, but it was never
mass produced or put into products, only reference designs exist.
The upstream support was never completed and it is unlikely that
this will happen so drop the support for now to simplify
maintenance of the U8500.

Cc: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

"debounce_interval" was never supported.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

LPTimer pwm cells should be updated to 3, to allow initialization of
channel, period and polarity.
Signed-off-by: NFabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Add I2C1 support for stm32h743i-eval Board
Signed-off-by: NPierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Add I2C support for STM32H743 SoC
Signed-off-by: NPierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Add I2C1 support for stm32f746-disco Board
Signed-off-by: NPierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Add I2C1 support for stm32f769-disco Board
Signed-off-by: NPierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Append 3 additional I2C instance for STM32F746 SoC.
Signed-off-by: NPierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Add display support on the stm32f469-disco board.
Signed-off-by: NPhilippe Cornu <philippe.cornu@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

In the stm32f4 family, mipi dsi is only supported on stm32f469.
So add a new stm32f469 dtsi file & add mipi dsi support inside.
Signed-off-by: NPhilippe Cornu <philippe.cornu@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Use gpio bindings for vcc5v_otg.
Signed-off-by: NPhilippe Cornu <philippe.cornu@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Since commit 83a86fbb ("irqchip/gic: Loudly complain about
the use of IRQ_TYPE_NONE"), a warning is raised if IRQ_TYPE_NONE is used.
So we use IRQ_TYPE_LEVEL_HIGH for usart nodes instead of IRQ_TYPE_NONE.
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>
Tested-by: NFabrice Gasnier <fabrice.gasnier@st.com>

Fix DTC warnings for stm32mp157:

Warning (unit_address_vs_reg): /soc/pin-controller: node has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): /soc/pin-controller/uart4@0: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /soc/pin-controller-z: node has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

This patch adds flash nor on qspi. Each flash is
connected in quad mode and has its own chip select.
Signed-off-by: NLudovic Barre <ludovic.barre@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

This patch adds qspi support on stm32mp157c,
read in memory mapped, write in indirect mode.
Signed-off-by: NLudovic Barre <ludovic.barre@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

This patch enables cec node on stm32mp157c-ev1 board
Signed-off-by: NYannick Fertre <yannick.fertre@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

This patch adds cec support on stm32mp157c eval board.
Signed-off-by: NYannick Fertre <yannick.fertre@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Add cec support on stm32mp157c
Signed-off-by: Nyannick fertre <yannick.fertre@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Add support for USBH (USB Host) to STM32MP157C SoC.
USBH is a USB Host controller supporting the standard registers used for
full- and low-speed (OHCI controller) and high-speed (EHCI controller).
Signed-off-by: NAmelie Delaunay <amelie.delaunay@st.com>

This patch enables USBPHYC (USB PHY Controller) on stm32mp157c-ev1.
This enables the two usbphyc usb2 ports.
Signed-off-by: NAmelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

USBPHYC ports require 3 supplies: 3v3, 1v1 and 1v8.
This patch adds the corresponding properties to usbphyc ports on
stm32mp157c-ed1 board.
Signed-off-by: NAmelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Add support for USBPHYC (USB PHY Controller) to STM32MP157C SoC.
It manages two usb2 ports.
Signed-off-by: NAmelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Add dsi support on stm32mp157c
Signed-off-by: Nyannick fertre <yannick.fertre@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Add support for the display controller ltdc.
Signed-off-by: Nyannick fertre <yannick.fertre@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Add I2C1/5 support for STM32MP157C evaluation daughter on evaluation
mother board.
Signed-off-by: NPierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Add I2C4 support for STM32MP157C evaluation daughter.
Required for PMIC.
Signed-off-by: NPierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

This patch adds pins groups for I2C1,2,4 & 5
Signed-off-by: NPierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

This patch adds all STM32F7 I2C instances for STM32MP157C SoC.
Signed-off-by: NPierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

This patch add CRC instance of the stm32mp157c SoC
Signed-off-by: NLionel Debieve <lionel.debieve@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

This patch add CRYP instance of the stm32mp157c SoC
Signed-off-by: NLionel Debieve <lionel.debieve@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Enable stm32-hwrng for ed1 and ev1 boards
Signed-off-by: NLionel Debieve <lionel.debieve@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

This patch add RNG instance of the stm32mp157c SoC
Signed-off-by: NLionel Debieve <lionel.debieve@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Activate MDMA for STM32MP157C
Signed-off-by: NPierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Activate DMAMUX for STM32MP157C
Signed-off-by: NPierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

Activate DMAv2 for STM32MP157C
Signed-off-by: NPierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: NAlexandre Torgue <alexandre.torgue@st.com>

While the supported UHS mode can be obtained from CAPA2
register, SD Host Controller Standard Specification
doesn't define bits for MMC's HS200 and DDR mode capability.
Add properties to indicate MMC HS200 and DDR speed mode capability in
dt node.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Use sdhci-omap programming model based on the generic sdhci
library for programming the eMMC/SD/SDIO controller.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Add support for WLAN using wilink8 module. On dra76-evm, MMC4 is
used for connecting to wilink8 module.
Signed-off-by: NVishal Mahaveer <vishalm@ti.com>
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>