Remove internal command queuing from the driver.  As is, this
driver cannot tolerate cable-pulls as I/Os will begin to fail
by the upper layers.

     o Should be used in conjuction with the
       11-fc_rport_adds_2.diff patch.
     o Removes qla_listops.h file -- no longer needed.
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This patch makes scsi_send_eh_cmnd() use sdev and shost instead of
referencing them through scmd-> everytime.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This patch removes volatile qualifier from scsi_device->device_busy,
Scsi_Host->host_busy and ->host_failed as the volatile qualifiers
don't serve any purpose now.  While at it, convert those fields from
unsigned short to unsigned int as suggested by Christoph.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

We have a DID_IMM_RETRY to require a retry at once, but we could do with
a DID_REQUEUE to instruct the mid-layer to treat this command in the
same manner as QUEUE_FULL or BUSY (i.e. halt the submission until
another command returns ... or the queue pressure builds if there are no
outstanding commands).
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

From: Andreas Herrmann <aherrman@de.ibm.com>

This patch mainly introduces support for point-2-point
topology.

From: Heiko Carstens <heiko.carstens@de.ibm.com>
From: Maxim Shchetynin <maxim@de.ibm.com>
From: Andreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Also broken design in its compat handlers - CONFIG_COMPAT doesn't 
mean that there should be no native ioctls.
Signed-off-by: NAndi Kleen <ak@muc.de>

Reworked with comments from Markus Lidel by:
Christoph Hellwig <hch@infradead.org>

Rejections fixed and
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Fix up two drivers that incorrectly were using the old return values for
their new-style EH methods and kill off scsi_obsolete.h that defined the
constants.  The initio driver has all these constansts defined locally
and uses them internally, I'll fix that up some time later.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

scsi_cmnd->serial_number_at_timeout doesn't serve any purpose
anymore.  All serial_number == serial_number_at_timeout tests
are always true in abort callbacks.  Kill the field.  Also, as
->pid always equals ->serial_number and ->serial_number
doesn't have any special meaning anymore, update comments
above ->serial_number accordingly.  Once we remove all uses of
this field from all lldd's, this field should go.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

scsi_cmnd->internal_timeout field doesn't have any meaning
anymore.  Kill the field.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

We have the scsi_print_* functions in the proper namespace for a long
time now and there weren't a lot users left.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Adapted from a patch in SuSE's kernel SRPM.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

- add a comment to the device structure that the device_busy field
  is now protected by the request_queue->queue_lock
- null out sdev->request_queue after the queue is released to trap
  any (and there shouldn't be any) use after the queue is freed.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

The current problem seen is that the queue lock is actually in the
SCSI device structure, so when that structure is freed on device
release, we go boom if the queue tries to access the lock again.

The fix here is to move the lock from the scsi_device to the queue.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This driver has had it's own different infrastructure for doing this for
ages, but it's time it used the common one.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NAndreas Herrmann <aherrman@de.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

The attachment combines the most recent patch from
Yum Rayan <yum.rayan@gmail.com> (to reduce sg stack
usage), Adrian Bunk <bunk@stusta.de> (to fix check
after use) and me (fix elapsed time calculation
(duration) on ia64 machines).

I have modified the patch from Yum Rayan so kmalloc()
in sg_read() is only called for the (rare) code paths
that need them.

Changelog:
   - reduce stack usage in sg_ioctl() and sg_read()
   - fix check after use in sg_mmap()
   - hold duration internally in milliseconds and
     check current time later than held time
Signed-off-by: NDouglas Gilbert <dougg@torque.net>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

The conditions that cause these calls to MD_BUG are not kernel bugs, just
oddities in what userspace is asking for.

Also convert analyze_sbs to return void, and the value it returned was
always 0.
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There is a tiny race when de-registering an MD thread, in that the thread
could disappear before it is set a SIGKILL, causing send_sig to have
problems.  

This is most easily closed by holding tasklist_lock between enabling the
thread to exit (setting ->run to NULL) and telling it to exit.

(akpm: ick.  Needs to use kthread API and stop using signals)
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch does the long overdue updates to MAINTAINERS file for aty128fb
and radeonfb.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix the formatting of some comments in 8250.c, and add a note that the
register_serial / unregister_serial shouldn't be used in new code.

We do this here in preference to adding to linux/serial.h, since that is used
by a number of non-8250 drivers which pretend to be 8250.  It is not known
whether it would be appropriate to do so.
Signed-off-by: NRussell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We were failing to close on an error path, resulting in a leak of struct files
which could take a v4 server down fairly quickly....  So call
nfs4_close_delegation instead of just open-coding parts of it.

Simplify the cleanup on delegation failure while we're at it.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

rpc_create_clnt and friends return errors, not NULL, on failure.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fixes the error "RPC: failed to contact portmap (errno -512)." when the server
later tries to unregister from the portmapper.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This fixes the lots-of-fsx-linux-instances-cause-a-slow-leak bug.

It's been there since 2.6.6, caused by:

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.5/2.6.5-mm4/broken-out/jbd-move-locked-buffers.patch

That patch moves under-writeout ordered-data buffers onto a separate journal
list during commit.  It took out the old code which was based on a single
list.

The old code (necessarily) had logic which would restart I/O against buffers
which had been redirtied while they were on the committing transaction's
t_sync_datalist list.  The new code only writes buffers once, ignoring
redirtyings by a later transaction, which is good.

But over on the truncate side of things, in journal_unmap_buffer(), we're
treating buffers on the t_locked_list as inviolable things which belong to the
committing transaction, and we just leave them alone during concurrent
truncate-vs-commit.

The net effect is that when truncate tries to invalidate a page whose buffers
are on t_locked_list and have been redirtied, journal_unmap_buffer() just
leaves those buffers alone.  truncate will remove the page from its mapping
and we end up with an anonymous clean page with dirty buffers, which is an
illegal state for a page.  The JBD commit will not clean those buffers as they
are removed from t_locked_list.  The VM (try_to_free_buffers) cannot reclaim
these pages.

The patch teaches journal_unmap_buffer() about buffers which are on the
committing transaction's t_locked_list.  These buffers have been written and
I/O has completed.  We can take them off the transaction and undirty them
within the context of journal_invalidatepage()->journal_unmap_buffer().
Acked-by: N"Stephen C. Tweedie" <sct@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Correct unwinding in error path of mthca_init_icm().
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Decouple table of HCA features from exact HCA device type.  Add a current FW
version field so we can warn when someone is using old FW.  Add support for
new MT25204 HCA.

Remove the warning about mem-free support, since it should be pretty solid at
this point.
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix RDMA in mem-free mode: we need to make sure that the RDMA context memory
is mapped for the HCA.
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update initialization of receive queue to match new documentation.  This
change is required to support new MT25204 HCA.
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clean up mem-free mode support by introducing mthca_is_memfree() function,
which encapsulates the logic of deciding if a device is mem-free.
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Minor tweaks to firmware command handling: kill off an unused get of a value,
and add a little more info to debug output.
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Implement fast memory regions (FMRs), where the driver writes directly into
the HCA's translation tables rather than requiring a firmware command.  For
Tavor, MTTs for FMR are separate from regular MTTs, and are reserved at driver
initialization.  This is done to limit the amount of virtual memory needed to
map the MTTs.  For Arbel, there's no such limitation, and all MTTs and MPTs
may be used for FMR or for regular MR.
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Split Tavor and Arbel/mem-free index<->hw key munging routines, so that FMR
implementation can call correct implementation without testing HCA type (which
it already knows).
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add mthca_table_find() function, which returns the lowmem address of an entry
in a mem-free HCA's context tables.  This will be used by the FMR
implementation.
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add code for SYNC_TPT firmware command, which will be used by FMR
implementation.
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add mthca_write64_raw() function, which will be used to write FMR entries that
are in ioremapped PCI memory.
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Encapsulate the buddy allocator used for MTT segments.  This cleans up the
code and also gets us ready to add FMR support.
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make address handle verbs usable from interrupt context.
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fill in missing fields in send completions.
Signed-off-by: NItamar Rabenstein <itamar@mellanox.co.il>
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix bug in MTT allocation in mem-free mode.

I misunderstood the MTT size value returned by the firmware -- it is really
the size of a single MTT entry, since mem-free mode does not segment the MTT
as the original firmware did.  This meant that our MTT addresses ended up
being off by a factor of 8.  This meant that our MTT allocations might
overlap, and so we could overwrite and corrupt earlier memory regions when
writing new MTT entries.

We fix this by always using our 64-byte MTT segment size.  This allows some
simplification of the code as well, since there's no reason to put the MTT
segment size in a variable -- we can always use our enum value directly.
Signed-off-by: NRoland Dreier <roland@topspin.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>