Add a selftest to ensure that we restore the whitelisted registers after
rewrite the registers everytime they might be scrubbed, e.g. module
load, reset and resume. For the other volatile workaround registers, we
export their presence via debugfs and check in igt/gem_workarounds.
However, we don't export the whitelist and rather than do so, let's test
them directly in the kernel.

The test we use is to read the registers back from the CS (this helps us
be sure that the registers will be valid for MI_LRI etc). In order to
generate the expected list, we split intel_whitelist_workarounds_emit
into two phases, the first to build the list and the second to apply.
Inside the test, we only build the list and then check that list against
the hw.

v2: Filter out pre-gen8 as they do not have RING_NONPRIV.
v3: Drop unused engine parameter, no plans to use it now or future.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NOscar Mateo <oscar.mateo@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180414122754.569-1-chris@chris-wilson.co.uk

There are different kind of workarounds (those that modify registers that
live in the context image, those that modify global registers, those that
whitelist registers, etc...) and they have different requirements in terms
of where they are applied and how. Also, by splitting them apart, it should
be easier to decide where a new workaround should go.

v2:
  - Add multiple MISSING_CASE
  - Rebased

v3:
  - Rename mmio_workarounds to gt_workarounds (Chris, Mika)
  - Create empty placeholders for BDW and CHV GT WAs
  - Rebased

v4: Rebased

v5:
 - Rebased
 - FORCE_TO_NONPRIV register exists since BDW, so make a path
   for it to achieve universality, even if empty (Chris)
Signed-off-by: NOscar Mateo <oscar.mateo@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
[ickle: appease checkpatch]
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1523376767-18480-2-git-send-email-oscar.mateo@intel.com

This has grown to be a sizable amount of code, so move it to
its own file before we try to refactor anything. For the moment,
we are leaving behind the WA BB code and the WAs that get applied
(incorrectly) in init_clock_gating, but we will deal with it later.

v2: Use intel_ prefix for code that deals with the hardware (Chris)
v3: Rebased
v4:
  - Rebased
  - New license header
v5:
  - Rebased
  - Added some organisational notes to the file (Chris)
v6: Include DOC section in the documentation build (Jani)
Signed-off-by: NOscar Mateo <oscar.mateo@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
[ickle: appease checkpatch, mostly]
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1523376767-18480-1-git-send-email-oscar.mateo@intel.com

As the ringbuffer may exist inside stolen memory, our access to it may
be via the GTT iomap. This implies we may only have WC access for which
the conventional memset() substitution of rep stos performs very badly,
so switch to the rep mov[dq] variants when available.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180319123528.28249-1-chris@chris-wilson.co.uk

The only usage outside the intel_lrc.c file is in the ringbuffer
init, but the irq mask calculated there is then overwritten for
all engines that have a non-zero shift, so we can drop it.

This change is not aimed at code saving but at removing from
intel_engines information that does not apply to all gens that have
the engine. When checking without the temporary WARN_ON, code size
is basically unchanged.

v2: make the irq_shifts array static const
v3: rebase, move irq_shifts array to logical_ring_default_irqs
v4: move array inside the if and use u8 for it (Chris)
Suggested-by: NMichel Thierry <michel.thierry@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180314182653.26981-4-daniele.ceraolospurio@intel.com

The mmio bases we're currently storing in the intel_engines array are
only valid for a subset of gens, so we need to ignore them and use
different values in some cases. Instead of doing that, we can have a
table of [starting gen, mmio base] pairs for each engine in
intel_engines and select the correct one based on the gen we're running
on in a consistent way.

v2: document that the list goes in reverse order, update starting gen
    for render (Chris)

v3: starting gen for render back to 1 to make our life easier with
    selftests (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v2
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180314182653.26981-1-daniele.ceraolospurio@intel.com

When wedged, we do not update the ring->tail as we submit the requests
causing us to leak the ring->space upon cleaning up the wedged driver.
We can just use the value stored in rq->tail, and keep the submission
backend details away from set-wedge.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180307134226.25492-3-chris@chris-wilson.co.uk

We want to de-emphasize the link between the request (dependency,
execution and fence tracking) from GEM and so rename the struct from
drm_i915_gem_request to i915_request. That is we may implement the GEM
user interface on top of requests, but they are an abstraction for
tracking execution rather than an implementation detail of GEM. (Since
they are not tied to HW, we keep the i915 prefix as opposed to intel.)

In short, the spatch:
@@

@@
- struct drm_i915_gem_request
+ struct i915_request

A corollary to contracting the type name, we also harmonise on using
'rq' shorthand for local variables where space if of the essence and
repetition makes 'request' unwieldy. For globals and struct members,
'request' is still much preferred for its clarity.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221095636.6649-1-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMichał Winiarski <michal.winiarski@intel.com>
Acked-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Coccinelle patch:

 @@
 identifier p;
 @@
 -INTEL_INFO(p)->gen
 +INTEL_GEN(p)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208130606.15556-12-tvrtko.ursulin@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180209215847.6660-1-chris@chris-wilson.co.uk

drivers/gpu/drm/i915/intel_ringbuffer.c:179: warning: No description found for parameter 'req'
drivers/gpu/drm/i915/intel_ringbuffer.c:741: warning: No description found for parameter 'req'
drivers/gpu/drm/i915/intel_ringbuffer.c:741: warning: No description found for parameter 'cs'
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208111220.32293-1-chris@chris-wilson.co.uk

On blb and pnv, we are seeing sporadic

  i915 0000:00:02.0: Resetting chip after gpu hang
  [drm:intel_gpu_reset [i915]] rcs0: timed out on STOP_RING
  [drm:i915_reset [i915]] *ERROR* Failed hw init on reset -5

which notably lack the actual root cause of the error. Ostensibly it
should be the init_ring_common() that failed, but it's error paths are
covered by DRM_ERROR.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180207111545.17078-1-chris@chris-wilson.co.uk

The legacy i915_switch_context() is only applicable to the legacy
ringbuffer submission method, so move it from the general
i915_gem_context.c to intel_ringbuffer.c (rename pending!).
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123152631.31385-2-chris@chris-wilson.co.uk

The legacy context switch for ringbuffer submission is multistaged,
where each of those stages may fail. However, we were updating global
state after some stages, and so we had to force the incomplete request
to be submitted because we could not unwind. Save the global state
before performing the switches, and so enable us to unwind back to the
previous global state should any phase fail. We then must cancel the
request instead of submitting it should the construction fail.

v2: s/saved_ctx/from_ctx/; s/ctx/to_ctx/ etc.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123152631.31385-1-chris@chris-wilson.co.uk

Having disabled the broken semaphores on Sandybridge, there is no need
for a modparam any more, so remove it in favour of a simple
HAS_LEGACY_SEMAPHORES() guard.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171120205504.21892-5-chris@chris-wilson.co.uk

Since removing the module parameter to force selection of ringbuffer
emission for gen8, the code is defunct. Remove it.

To put the difference into perspective, a couple of microbenchmarks
(bdw i7-5557u, 20170324):
                                        ring          execlists
exec continuous nops on all rings:   1.491us            2.223us
exec sequential nops on each ring:  12.508us           53.682us
single nop + sync:                   9.272us           30.291us

vblank_mode=0 glxgears:            ~11000fps           ~9000fps

Since the earlier submission, gen8 ringbuffer submission has fallen
further and further behind in features. So while ringbuffer may hold the
throughput crown, in terms of interactive latency, execlists is much
better. Alas, we have no convenient metrics for such, other than
demonstrating things we can do with execlists but can not using
legacy ringbuffer submission.

We have made a few improvements to lowlevel execlists throughput,
and ringbuffer currently panics on boot! (bdw i7-5557u, 20171026):

                                        ring          execlists
exec continuous nops on all rings:       n/a            1.921us
exec sequential nops on each ring:       n/a           44.621us
single nop + sync:                       n/a           21.953us

vblank_mode=0 glxgears:                  n/a          ~18500fps

References: https://bugs.freedesktop.org/show_bug.cgi?id=87725Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Once-upon-a-time-Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171120205504.21892-2-chris@chris-wilson.co.uk

During request construction, after pinning the context we know whether
or not we have to emit a context switch. So move this common operation
from every caller into i915_gem_request_alloc() itself.

v2: Always submit the request if we emitted some commands during request
construction, as typically it also involves changes in global state.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171120102002.22254-2-chris@chris-wilson.co.uk

At the start of building a request, we would wait for roughly enough
space to fit the average request (to reduce the likelihood of having to
wait and abort partway through request construction). To achieve we
would try to begin a 0-length command packet, this just adds extra
confusion so make the wait-for-space explicit, as in the next patch we
want to move it from the backend to the i915_gem_request_alloc() so it
can ensure that the wait-for-space is the first operation in building a
new request.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115151204.8105-2-chris@chris-wilson.co.uk

As we now record the default HW state and so only emit the "golden"
renderstate once to prepare the HW, there is no advantage in keeping the
renderstate batch around as it will never be used again.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110142634.10551-8-chris@chris-wilson.co.uk

Take a copy of the HW state after a reset upon module loading by
executing a context switch from a blank context to the kernel context,
thus saving the default hw state over the blank context image.
We can then use the default hw state to initialise any future context,
ensuring that each starts with the default view of hw state.

v2: Unmap our default state from the GTT after stealing it from the
context. This should stop us from accidentally overwriting it via the
GTT (and frees up some precious GTT space).

Testcase: igt/gem_ctx_isolation
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110142634.10551-7-chris@chris-wilson.co.uk

In the next few patches, we will want to both copy out of the context
image and write a valid image into a new context. To be completely safe,
we should then couple in our domain tracking to ensure that we don't
have any issues with stale data remaining in unwanted cachelines.

Historically, we omitted the .write=true from the call to set-gtt-domain
in i915_switch_context() in order to avoid a stall between every request
as we would want to wait for the previous context write from the gpu.
Since then, we limit the set-gtt-domain to only occur when we first bind
the vma, so once in use we will never stall, and we are sure to flush
the context following a load from swap.

Equally we never applied the lessons learnt from ringbuffer submission
to execlists; so time to apply the flush of the lrc after load as well.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110142634.10551-6-chris@chris-wilson.co.uk

An interesting snippet from Sandybridge's prm:

"Although a Ring Buffer can be enabled in the non-empty state, it must
not be disabled unless it is empty. Attempting to disable a Ring Buffer
in the non-empty state is UNDEFINED."

Let's avoid the undefined behaviour as we disable the rings prior to
reset and resume.

v2: Tell HEAD to catch up to TAIL (empty ring) first, then reset both to
0 (supposedly while stopped).
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171027094311.30380-1-chris@chris-wilson.co.uk

In the next patch, we will want to install a callback when the engines
(GT as a whole) become idle and similarly when they first become busy.
To enable that callback, first rename intel_engines_mark_idle() to
intel_engines_park() and provide the companion intel_engines_unpark().
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171025143943.7661-2-chris@chris-wilson.co.uk

In the next patch, we want to reduce the lock coverage within the
shrinker, and one of the dangerous walks we have is over obj->vma_list.
We are only walking the obj->vma_list in order to check whether it has
been permanently pinned by HW access, typically via use on the scanout.
But we have a couple of other long term pins, the context objects for
which we currently have to check the individual vma pin_count. If we
instead mark these using obj->pin_display, we can forgo the dangerous
and sometimes slow list iteration.

v2: Rearrange code to try and avoid confusion from false associations
due to arrangement of whitespace along with rebasing on obj->pin_global.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013202621.7276-4-chris@chris-wilson.co.uk

Before modifying the ring register (RING_START, HEAD, TAIL, CTL) we
first make sure it is stopped (or else the hw may not resample the
registers). However, we do not need to let the hw restart until after we
have reprogrammed all the rings. This should help prevent situations
where pending operations on the ring may resume (because we are trying
to re-initialize following an unsuccessful GPU hang, i.e. from
i915_gem_unset_wedged).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103260Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013131218.18013-1-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>

Add assert_forcewakes_active() (the complementary function to
assert_forcewakes_inactive) that documents the requirement of a
function for its callers to be holding the forcewake ref (i.e. the
function is part of a sequence over which RC6 must be prevented).

One such example is during ringbuffer reset, where RC6 must be held
across the whole reinitialisation sequence.

v2: Include debug information in the WARN so we know which fw domain is
missing.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20171009110301.21705-5-chris@chris-wilson.co.uk

Our global struct with params is named exactly the same way
as new preferred name for the drm_i915_private function parameter.
To avoid such name reuse lets use different name for the global.

v5: pure rename
v6: fix

Credits-to: Coccinelle

@@
identifier n;
@@
(
-	i915.n
+	i915_modparams.n
)
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Ville Syrjala <ville.syrjala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170919193846.38060-1-michal.wajdeczko@intel.com

When wedging the hw, we want to mark all in-flight requests as -EIO.
This is made slightly more complex by execlists who store the ready but
not yet submitted-to-hw requests on a private queue (an rbtree
priolist). Call into execlists to cancel not only the ELSP tracking for
the submitted requests, but also the queue of unsubmitted requests.

v2: Move the majority of engine_set_wedged to the backends (both legacy
ringbuffer and execlists handling their own lists).
Reported-by: NMichał Winiarski <michal.winiarski@intel.com>
Testcase: igt/gem_eio/in-flight-contexts
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170915173100.26470-1-chris@chris-wilson.co.ukReviewed-by: NMichał Winiarski <michal.winiarski@intel.com>

The execlist code already masks everything in the ring HWSTAM, but
the ringbuffer code doesn't. Let's go ahead and do that. Pre-gen6
platforms setup HWSTAM during irq setup already since there's just
the one register, and it also contains bits for non-ring interrupts.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170818183705.27850-13-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

On gen8+ we're currently using the PPHWSP of the kernel ctx as the
global HWSP. However, when the kernel ctx gets submitted (e.g. from
__intel_autoenable_gt_powersave) the HW will use that page as both
HWSP and PPHWSP. This causes a conflict in the register arena of the
HWSP, i.e. dword indices below 0x30. We don't current utilize this arena,
but in the following patches we will take advantage of the cached
register state for handling execlist's context status interrupt.

To avoid the conflict, instead of re-using the PPHWSP of the kernel
ctx we can allocate a separate page for the HWSP like what happens for
pre-execlists platform.

v2: Add a use-case for the register arena of the HWSP.
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499357440-34688-1-git-send-email-daniele.ceraolospurio@intel.comSigned-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMichel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170913085605.18299-3-chris@chris-wilson.co.uk

Gen7 won't get any new engines, and we already added VCS2 there to just
silence gcc's not handled in switch warnings.

Use a default case instead, otherwise we will need to keep adding extra
cases if changes happen in the future.

v2: Since reaching the default case is impossible, use GEM_BUG_ON (Chris).

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NMichel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170830180115.907-1-michel.thierry@intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

We require the caller to ensure that the packets they wish to emit into
the CS ring are qword aligned (i.e. have an even number of dwords).
Double check this.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170721161101.1618-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Since bb8f0f5a ("drm/i915: Split intel_engine allocation
and initialisation") intel_info->num_rings is set early in the
load sequence and so available to be used direclty in the 2nd
load phase.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170616130339.23015-1-tvrtko.ursulin@linux.intel.com

We need to keep track of the last location we ask the hw to read up to
(RING_TAIL) separately from our last write location into the ring, so
that in the event of a GPU reset we do not tell the HW to proceed into
a partially written request (which can happen if that request is waiting
for an external signal before being executed).

v2: Refactor intel_ring_reset() (Mika)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100144
Testcase: igt/gem_exec_fence/await-hang
Fixes: 821ed7df ("drm/i915: Update reset path to fix incomplete requests")
Fixes: d55ac5bf ("drm/i915: Defer transfer onto execution timeline to actual hw submission")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170425130049.26147-1-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
(cherry picked from commit e6ba9992)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170615131129.3061-1-chris@chris-wilson.co.uk

Typically, there is space available within the ring and if not we have
to wait (by definition a slow path). Rearrange the code to reduce the
number of branches and stack size for the hotpath, accomodating a slight
growth for the wait.

v2: Fix the new assert that packets are not larger than the actual ring.
v3: Make the parameters unsigned as well to make usage.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170504130846.4807-3-chris@chris-wilson.co.uk

Some callers immediately want to know the current ring->space after
calling intel_ring_update_space(), which we can freely provide via the
return parameter.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170504130846.4807-2-chris@chris-wilson.co.uk

Exploit the power-of-two ring size to compute the space across the
wraparound using a mask rather than a if. Convert to unsigned integers
so the operation is well defined.

References: https://bugs.freedesktop.org/show_bug.cgi?id=99671Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170504130846.4807-1-chris@chris-wilson.co.uk

Since unifying ringbuffer/execlist submission to use
engine->pin_context, we ensure that the intel_ring is available before
we start constructing the request. We can therefore move the assignment
of the request->ring to the central i915_gem_request_alloc() and not
require it in every engine->request_alloc() callback. Another small step
towards simplification (of the core, but at a cost of handling error
pointers in less important callers of engine->pin_context).

v2: Rearrange a few branches to reduce impact of PTR_ERR() on gcc's code
generation.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NOscar Mateo <oscar.mateo@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170504093308.4137-1-chris@chris-wilson.co.uk

Pre-calculate engine context size based on engine class and device
generation and store it in the engine instance.

v2:
- Squash and get rid of hw_context_size (Chris)

v3:
- Move after MMIO init for probing on Gen7 and 8 (Chris)
- Retained rounding (Tvrtko)
v4:
- Rebase for deferred legacy context allocation
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: intel-gvt-dev@lists.freedesktop.org
Acked-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Almost from the outset for execlists, we used deferred allocation of the
logical context and rings. Then we ported the infrastructure for pinning
contexts back to legacy, and so now we are able to also implement
deferred allocation for context objects prior to first use on the legacy
submission.

v2: We still need to differentiate between legacy engines, Joonas is
fixing that but I want this first ;) (Joonas)
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427104651.22394-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

If we poison the request before we emit commands, it should be easier to
spot when we execute an uninitialised request.

References: https://bugs.freedesktop.org/show_bug.cgi?id=100144Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170423170619.7156-2-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>