Move the tracing startup selftest code into its own function and
when not enabled, always have that function succeed.

This makes the register_tracer() function much more readable.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The ring buffer updates when done while the ring buffer is active,
needs to be completed on the CPU that is used for the ring buffer
per_cpu buffer. To accomplish this, schedule_work_on() is used to
schedule work on the given CPU.

Now there's no reason to use schedule_work_on() if the process
doing the update happens to be on the CPU that it is processing.
It has already filled the requirement. Instead, just do the work
and continue.

This is needed for tracing_snapshot_alloc() where it may be called
really early in boot, where the work queues have not been set up yet.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The new snapshot feature is quite handy. It's a way for the user
to take advantage of the spare buffer that, until then, only
the latency tracers used to "snapshot" the buffer when it hit
a max latency. Now users can trigger a "snapshot" manually when
some condition is hit in a program. But a snapshot currently can
not be triggered by a condition inside the kernel.

With the addition of tracing_snapshot() and tracing_snapshot_alloc(),
snapshots can now be taking when a condition is hit, and the
developer wants to snapshot the case without stopping the trace.

Note, any snapshot will overwrite the old one, so take care
in how this is done.

These new functions are to be used like tracing_on(), tracing_off()
and trace_printk() are. That is, they should never be called
in the mainline Linux kernel. They are solely for the purpose
of debugging.

The tracing_snapshot() will not allocate a buffer, but it is
safe to be called from any context (except NMIs). But if a
snapshot buffer isn't allocated when it is called, it will write
to the live buffer, complaining about the lack of a snapshot
buffer, and then stop tracing (giving you the "permanent snapshot").

tracing_snapshot_alloc() will allocate the snapshot buffer if
it was not already allocated and then take the snapshot. This routine
*may sleep*, and must be called from context that can sleep.
The allocation is done with GFP_KERNEL and not atomic.

If you need a snapshot in an atomic context, say in early boot,
then it is best to call the tracing_snapshot_alloc() before then,
where it will allocate the buffer, and then you can use the
tracing_snapshot() anywhere you want and still get snapshots.

Cc: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add a ref count to the trace_array structure and prevent removal
of instances that have open descriptors.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add the per_cpu directory to the created tracing instances:

  cd /sys/kernel/debug/tracing/instances
  mkdir foo
  ls foo/per_cpu/cpu0
buffer_size_kb	snapshot_raw  trace	  trace_pipe_raw
snapshot	stats	      trace_pipe
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add the "snapshot" file to the the multi-buffer instances.

  cd /sys/kernel/debug/tracing/instances
  mkdir foo
  ls foo
buffer_size_kb  buffer_total_size_kb  events  free_buffer  set_event
snapshot  trace  trace_clock  trace_marker  trace_options  trace_pipe
tracing_on
  cat foo/snapshot
 # tracer: nop
 #
 #
 # * Snapshot is freed *
 #
 # Snapshot commands:
 # echo 0 > snapshot : Clears and frees snapshot buffer
 # echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.
 #                      Takes a snapshot of the main buffer.
 # echo 2 > snapshot : Clears snapshot buffer (but does not allocate)
 #                      (Doesn't have to be '2' works with any number that
 #                       is not a '0' or '1')
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

There's a bit of duplicate code in creating the trace buffers for
the normal trace buffer and the max trace buffer among the instances
and the main global_trace. This code can be consolidated and cleaned
up a bit making the code cleaner and more readable as well as less
duplication.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The snapshot buffer belongs to the trace array not the tracer that is
running. The trace array should be the data structure that keeps track
of whether or not the snapshot buffer is allocated, not the tracer
desciptor. Having the trace array keep track of it makes modifications
so much easier.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add a 'snapshot_raw' per_cpu file that allows tools to read the raw
binary data of the snapshot buffer.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When the preempt or irq latency tracers are enabled, they require
the ring buffer to be able to swap the per cpu sub buffers between
two main buffers. This adds a slight overhead to tracing as the
trace recording needs to perform some checks to synchronize
between recording and swaps that might be happening on other CPUs.

The config RING_BUFFER_ALLOW_SWAP is set when a user of the ring
buffer needs the "swap cpu" feature, otherwise the extra checks
are not implemented and removed from the tracing overhead.

The snapshot feature will swap per CPU if the RING_BUFFER_ALLOW_SWAP
config is set. But that only gets set by things like OPROFILE
and the irqs and preempt latency tracers.

This config is added to let the user decide to include this feature
with the snapshot agnostic from whether or not another user of
the ring buffer sets this config.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add the snapshot file into the per_cpu tracing directories to allow
them to be read for an individual cpu. This also allows to clear
an individual cpu from the snapshot buffer.

If the kernel allows it (CONFIG_RING_BUFFER_ALLOW_SWAP is set), then
echoing in '1' into one of the per_cpu snapshot files will do an
individual cpu buffer swap instead of the entire file.

Cc: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently, the way the latency tracers and snapshot feature works
is to have a separate trace_array called "max_tr" that holds the
snapshot buffer. For latency tracers, this snapshot buffer is used
to swap the running buffer with this buffer to save the current max
latency.

The only items needed for the max_tr is really just a copy of the buffer
itself, the per_cpu data pointers, the time_start timestamp that states
when the max latency was triggered, and the cpu that the max latency
was triggered on. All other fields in trace_array are unused by the
max_tr, making the max_tr mostly bloat.

This change removes the max_tr completely, and adds a new structure
called trace_buffer, that holds the buffer pointer, the per_cpu data
pointers, the time_start timestamp, and the cpu where the latency occurred.

The trace_array, now has two trace_buffers, one for the normal trace and
one for the max trace or snapshot. By doing this, not only do we remove
the bloat from the max_trace but the instances of traces can now use
their own snapshot feature and not have just the top level global_trace have
the snapshot feature and latency tracers for itself.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The snapshot utility is extremely useful, and does not add any more
overhead in memory when another latency tracer is enabled. They use
the snapshot underneath. There's no reason to hide the snapshot file
when a latency tracer has been enabled in the kernel.

If any of the latency tracers (irq, preempt or wakeup) is enabled
then also select the snapshot facility.

Note, snapshot can be enabled without the latency tracers enabled.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently we do not know what buffer a module event was enabled in.
On unload, it is safest to clear all buffer instances, not just the
top level buffer.

Todo: Clear only the buffer that the event was used in. The
infrastructure is there to do this, but it makes the code a bit
more complex. Lets get the current code vetted before we add that.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently, when a module with events is unloaded, the trace buffer is
cleared. This is just a safety net in case the module might have some
strange callback when its event is outputted. But there's no reason
to reset the buffer if the module didn't have any of its events traced.

Add a flag to the event "call" structure called WAS_ENABLED and gets set
when the event is ever enabled, and this flag never gets cleared. When a
module gets unloaded, if any of its events have this flag set, then the
trace buffer will get cleared.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

All the trace event flags have comments but the IGNORE_ENABLE flag
which is set for ftrace internal events that should not be enabled
via the debugfs "enable" file. That is, if the top level enable file
is set, it will enable all events. It use to just check the ftrace
event call descriptor "reg" field and skip those whithout it, but now
some ftrace internal events have a reg field but still need to be
skipped. The flag was created to ignore those events.

Now document it.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The move of blocked readers to the ring buffer left out the
init of the wait queue that is used. Tests missed this due to running
stress tests against the buffers, which didn't allow for any
readers to end up waiting. Running a simple read and wait triggered
a bug.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

As we've added __init annotation to field-defining functions, we should
add __refdata annotation to event_call variables, which reference those
functions.

Link: http://lkml.kernel.org/r/51343C1F.2050502@huawei.comReported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NLi Zefan <lizefan@huawei.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The new multi-buffers added a descriptor that kept track of module
events, and the directories they use, with struct ftace_module_file_ops.
This is used to add a ref count to keep modules from unloading while
their files are being accessed.

As the descriptor is only needed when CONFIG_MODULES is enabled, it
is only declared when the config is enabled. But that struct is
dereferenced in a few areas outside the #ifdef CONFIG_MODULES.

By adding some helper routines and moving code around a little,
events can be compiled again without modules.
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

With the conversion of the data array to per cpu, sparse now complains
about the use of per_cpu_ptr() on the variable. But The variable is
allocated with alloc_percpu() and is fine to use. But since the structure
that contains the data variable does not annotate it as such, sparse
gives out a lot of false warnings.
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

These two functions are called during kernel boot only.

Link: http://lkml.kernel.org/r/51258796.7020704@huawei.comSigned-off-by: NLi Zefan <lizefan@huawei.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Those functions are called either during kernel boot or module init.

Before:

$ dmesg | grep 'Freeing unused kernel memory'
Freeing unused kernel memory: 1208k freed
Freeing unused kernel memory: 1360k freed
Freeing unused kernel memory: 1960k freed

After:

$ dmesg | grep 'Freeing unused kernel memory'
Freeing unused kernel memory: 1236k freed
Freeing unused kernel memory: 1388k freed
Freeing unused kernel memory: 1960k freed

Link: http://lkml.kernel.org/r/5125877D.5000201@huawei.comSigned-off-by: NLi Zefan <lizefan@huawei.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Move duplicate code in event print functions to a helper function.

This shrinks the size of the kernel by ~13K.

   text    data     bss     dec     hex filename
6596137 1743966 10138672        18478775        119f6b7 vmlinux.o.old
6583002 1743849 10138672        18465523        119c2f3 vmlinux.o.new

Link: http://lkml.kernel.org/r/51258746.2060304@huawei.comSigned-off-by: NLi Zefan <lizefan@huawei.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Move the logic to wake up on ring buffer data into the ring buffer
code itself. This simplifies the tracing code a lot and also has the
added benefit that waiters on one of the instance buffers can be woken
only when data is added to that instance instead of data added to
any instance.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

If the ring buffer is empty, a read to trace_pipe_raw wont block.
The tracing code has the infrastructure to wake up waiting readers,
but the trace_pipe_raw doesn't take advantage of that.

When a read is done to trace_pipe_raw without the O_NONBLOCK flag
set, have the read block until there's data in the requested buffer.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The trace_pipe_raw never implemented polling and this was casing
issues for several utilities. This is now implemented.

Blocked reads still are on the TODO list.
Reported-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Tested-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently only the splice NONBLOCK flag is checked to determine if
the splice read should block or not. But the file descriptor NONBLOCK
flag also needs to be checked.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The names used to display the field and type in the event format
files are copied, as well as the system name that is displayed.

All these names are created by constant values passed in.
If one of theses values were to be removed by a module, the module
would also be required to remove any event it created.

By using the strings directly, we can save over 100K of memory.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The event structures used by the trace events are mostly persistent,
but they are also allocated by kmalloc, which is not the best at
allocating space for what is used. By converting these kmallocs
into kmem_cache_allocs, we can save over 50K of space that is
permanently allocated.

After boot we have:

 slab name          active allocated size
 ---------          ------ --------- ----
ftrace_event_file    979   1005     56   67    1
ftrace_event_field   2301   2310     48   77    1

The ftrace_event_file has at boot up 979 active objects out of
1005 allocated in the slabs. Each object is 56 bytes. In a normal
kmalloc, that would allocate 64 bytes for each object.

 1005 - 979  = 26 objects not used
 26 * 56 = 1456 bytes wasted

But if we used kmalloc:

 64 - 56 = 8 bytes unused per allocation
 8 * 979 = 7832 bytes wasted

 7832 - 1456 = 6376 bytes in savings

Doing the same for ftrace_event_field where there's 2301 objects
allocated in a slab that can hold 2310 with 48 bytes each we have:

 2310 - 2301 = 9 objects not used
 9 * 48 = 432 bytes wasted

A kmalloc would also use 64 bytes per object:

 64 - 48 = 16 bytes unused per allocation
 16 * 2301 = 36816 bytes wasted!

 36816 - 432 = 36384 bytes in savings

This change gives us a total of 42760 bytes in savings. At least
on my machine, but as there's a lot of these persistent objects
for all configurations that use trace points, this is a net win.

Thanks to Ezequiel Garcia for his trace_analyze presentation which
pointed out the wasted space in my code.

Cc: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

With the new descriptors used to allow multiple buffers in the
tracing directory added, the kernel command line parameter
trace_events=... no longer works. This is because the top level
(global) trace array now has a list of descriptors associated
with the events and the files in the debugfs directory. But in
early bootup, when the command line is processed and the events
enabled, the trace array list of events has not been set up yet.

Without the list of events in the trace array, the setting of
events to record will fail because it would not match any events.

The solution is to set up the top level array in two stages.
The first is to just add the ftrace file descriptors that just point
to the events. This will allow events to be enabled and start tracing.
The second stage is called after the filesystem is set up, and this
stage will create the debugfs event files and directories associated
with the trace array events.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add a method to the hijacked dentry descriptor of the
"instances" directory to allow for rmdir to remove an
instance of a multibuffer.

Example:

  cd /debug/tracing/instances
  mkdir hello
  ls
hello/
  rmdir hello
  ls

Like the mkdir method, the i_mutex is dropped for the instances
directory. The instances directory is created at boot up and can
not be renamed or removed. The trace_types_lock mutex is used to
synchronize adding and removing of instances.

I've run several stress tests with different threads trying to
create and delete directories of the same name, and it has stood
up fine.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add the interface ("instances" directory) to add multiple buffers
to ftrace. To create a new instance, simply do a mkdir in the
instances directory:

This will create a directory with the following:

 # cd instances
 # mkdir foo
 # ls foo
buffer_size_kb        free_buffer  trace_clock    trace_pipe
buffer_total_size_kb  set_event    trace_marker   tracing_enabled
events/               trace        trace_options  tracing_on

Currently only events are able to be set, and there isn't a way
to delete a buffer when one is created (yet).

Note, the i_mutex lock is dropped from the parent "instances"
directory during the mkdir operation. As the "instances" directory
can not be renamed or deleted (created on boot), I do not see
any harm in dropping the lock. The creation of the sub directories
is protected by trace_types_lock mutex, which only lets one
instance get into the code path at a time. If two tasks try to
create or delete directories of the same name, only one will occur
and the other will fail with -EEXIST.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently the syscall events record into the global buffer. But if
multiple buffers are in place, then we need to have syscall events
record in the proper buffers.

By adding descriptors to pass to the syscall event functions, the
syscall events can now record into the buffers that have been assigned
to them (one event may be applied to mulitple buffers).

This will allow tracing high volume syscalls along with seldom occurring
syscalls without losing the seldom syscall events.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The global and max-tr currently use static per_cpu arrays for the CPU data
descriptors. But in order to get new allocated trace_arrays, they need to
be allocated per_cpu arrays. Instead of using the static arrays, switch
the global and max-tr to use allocated data.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Pass the struct ftrace_event_file *ftrace_file to the
trace_event_buffer_lock_reserve() (new function that replaces the
trace_current_buffer_lock_reserver()).

The ftrace_file holds a pointer to the trace_array that is in use.
In the case of multiple buffers with different trace_arrays, this
allows different events to be recorded into different buffers.

Also fixed some of the stale comments in include/trace/ftrace.h
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The global_trace variable in kernel/trace/trace.c has been kept 'static' and
local to that file so that it would not be used too much outside of that
file. This has paid off, even though there were lots of changes to make
the trace_array structure more generic (not depending on global_trace).

Removal of a lot of direct usages of global_trace is needed to be able to
create more trace_arrays such that we can add multiple buffers.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Both RING_BUFFER_ALL_CPUS and TRACE_PIPE_ALL_CPU are defined as
-1 and used to say that all the ring buffers are to be modified
or read (instead of just a single cpu, which would be >= 0).

There's no reason to keep TRACE_PIPE_ALL_CPU as it is also started
to be used for more than what it was created for, and now that
the ring buffer code added a generic RING_BUFFER_ALL_CPUS define,
we can clean up the trace code to use that instead and remove
the TRACE_PIPE_ALL_CPU macro.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The trace events for ftrace are all defined via global variables.
The arrays of events and event systems are linked to a global list.
This prevents multiple users of the event system (what to enable and
what not to).

By adding descriptors to represent the event/file relation, as well
as to which trace_array descriptor they are associated with, allows
for more than one set of events to be defined. Once the trace events
files have a link between the trace event and the trace_array they
are associated with, we can create multiple trace_arrays that can
record separate events in separate buffers.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The latency tracers require the buffers to be in overwrite mode,
otherwise they get screwed up. Force the buffers to stay in overwrite
mode when latency tracers are enabled.

Added a flag_changed() method to the tracer structure to allow
the tracers to see what flags are being changed, and also be able
to prevent the change from happing.

Cc: stable@vger.kernel.org
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Changing the overwrite mode for the ring buffer via the trace
option only sets the normal buffer. But the snapshot buffer could
swap with it, and then the snapshot would be in non overwrite mode
and the normal buffer would be in overwrite mode, even though the
option flag states otherwise.

Keep the two buffers overwrite modes in sync.

Cc: stable@vger.kernel.org
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>