- 12 7月, 2017 9 次提交
-
-
由 David S. Miller 提交于
Christophe JAILLET says: ==================== net: stmmac: Fixes and cleanups in 'alloc_dma_[rt]x_desc_resources()' These patchs are all related to 'alloc_dma_[rt]x_desc_resources()' functions. The 2 first fix an error path where some resources are leaking. I've separated them into 2 patches because the issues have been introduced by 2 deferent commits. The 3rd patch is just a clean-up. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christophe Jaillet 提交于
'alloc_dma_[rt]x_desc_resources()' functions look very close. Remove a useless initialization and use the same label name for error handling path in order to get them even closer. Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christophe Jaillet 提交于
If the first 'kmalloc_array' within the loop fails, we should free what as already been allocated, as done in all other error handling path. Fixes: ce736788 ("net: stmmac: adding multiple buffers for TX") Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christophe Jaillet 提交于
If the first 'kmalloc_array' within the loop fails, we should free what as already been allocated, as done in all other error handling path. Fixes: 54139cf3 ("net: stmmac: adding multiple buffers for rx") Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christophe Jaillet 提交于
if 'ioread32()' returns 0xFFFFFFF, we have to go through the error handling path as done everywhere else in this function. Move the 'err_free_wq' label to better match its name and its location and add a new label 'err_disable_wq'. Update the code accordingly. Fixes: 373fb087 ("enic: add devcmd2") Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Michael Chan says: ==================== bnxt_en: Bug fixes. 3 bug fixes in this series. Fix a crash in bnxt_get_stats64() that can happen if the device is closing and freeing the statistics block at the same time. The 2nd one fixes ethtool -L failing when changing from combined to non-combined mode or vice versa. The last one fixes SRIOV failure on big-endian systems because we were setting a bitmap wrong in a firmware message. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The PF driver sets up a list of firmware commands from the VF driver that needs to be forwarded to the PF for approval. This list is a 256-bit bitmap. The code that sets up the bitmap falls apart on big-endian architecture. __set_bit() does not work because it operates on long types whereas the firmware interface is defined in u32 types, causing bits in the wrong 32-bit word to be set. Fix it by setting the proper bits on an array of u32. Fixes: de68f5de ("bnxt_en: Fix bitmap declaration to work on 32-bit arches.") Reported-by: NShannon Nelson <shannon.nelson@oracle.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
When changing channels from combined to rx/tx or vice versa, the code uses the wrong "sh" parameter to determine if we are reserving rings for shared or non-shared mode. It should be using the ethtool requested "sh" parameter instead of the current "sh" parameter. Fix it by passing the "sh" parameter to bnxt_reserve_rings(). For ethtool, we will pass in the requested "sh" parameter. Fixes: 391be5c2 ("bnxt_en: Implement new scheme to reserve tx rings.") Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
.ndo_get_stats64() may not be protected by RTNL and can race with .ndo_stop() or other ethtool operations that can free the statistics memory. Fix it by setting a new flag BNXT_STATE_READ_STATS and then proceeding to read statistics memory only if the state is OPEN. The close path that frees the memory clears the OPEN state and then waits for the BNXT_STATE_READ_STATS to clear before proceeding to free the statistics memory. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 7月, 2017 1 次提交
-
-
由 Arnd Bergmann 提交于
The new IPSec offload code introduced a build error: drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_rxtx.o: In function `mlx5e_ipsec_build_inverse_table': ipsec_rxtx.c:(.text+0x556): undefined reference Another patch was added on top to fix the build error, but that introduced a new bug, as we now use the remainder of the division rather than the result. This makes it use the correct helper function instead. Fixes: 5dfd87b6 ("net/mlx5: IPSec, Fix 64-bit division on 32-bit builds") Fixes: 2ac9cfe7 ("net/mlx5e: IPSec, Add Innova IPSec offload TX data path") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Reviewed-by: NIlan Tayari <ilant@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 7月, 2017 11 次提交
-
-
https://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux由 David S. Miller 提交于
Saeed Mahameed says: ==================== mlx5-fixes-2017-07-09 This series includes fixes to mlx5 driver: - Compilation warnings and issues introduced on v4.12 - Initialize CEE's getpermhwaddr address buffer to 0xff ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI updates from Bjorn Helgaas: - add sysfs max_link_speed/width, current_link_speed/width (Wong Vee Khee) - make host bridge IRQ mapping much more generic (Matthew Minter, Lorenzo Pieralisi) - convert most drivers to pci_scan_root_bus_bridge() (Lorenzo Pieralisi) - mutex sriov_configure() (Jakub Kicinski) - mutex pci_error_handlers callbacks (Christoph Hellwig) - split ->reset_notify() into ->reset_prepare()/reset_done() (Christoph Hellwig) - support multiple PCIe portdrv interrupts for MSI as well as MSI-X (Gabriele Paoloni) - allocate MSI/MSI-X vector for Downstream Port Containment (Gabriele Paoloni) - fix MSI IRQ affinity pre/post/min_vecs issue (Michael Hernandez) - test INTx masking during enumeration, not at run-time (Piotr Gregor) - avoid using device_may_wakeup() for runtime PM (Rafael J. Wysocki) - restore the status of PCI devices across hibernation (Chen Yu) - keep parent resources that start at 0x0 (Ard Biesheuvel) - enable ECRC only if device supports it (Bjorn Helgaas) - restore PRI and PASID state after Function-Level Reset (CQ Tang) - skip DPC event if device is not present (Keith Busch) - check domain when matching SMBIOS info (Sujith Pandel) - mark Intel XXV710 NIC INTx masking as broken (Alex Williamson) - avoid AMD SB7xx EHCI USB wakeup defect (Kai-Heng Feng) - work around long-standing Macbook Pro poweroff issue (Bjorn Helgaas) - add Switchtec "running" status flag (Logan Gunthorpe) - fix dra7xx incorrect RW1C IRQ register usage (Arvind Yadav) - modify xilinx-nwl IRQ chip for legacy interrupts (Bharat Kumar Gogada) - move VMD SRCU cleanup after bus, child device removal (Jon Derrick) - add Faraday clock handling (Linus Walleij) - configure Rockchip MPS and reorganize (Shawn Lin) - limit Qualcomm TLP size to 2K (hardware issue) (Srinivas Kandagatla) - support Tegra MSI 64-bit addressing (Thierry Reding) - use Rockchip normal (not privileged) register bank (Shawn Lin) - add HiSilicon Kirin SoC PCIe controller driver (Xiaowei Song) - add Sigma Designs Tango SMP8759 PCIe controller driver (Marc Gonzalez) - add MediaTek PCIe host controller support (Ryder Lee) - add Qualcomm IPQ4019 support (John Crispin) - add HyperV vPCI protocol v1.2 support (Jork Loeser) - add i.MX6 regulator support (Quentin Schulz) * tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits) PCI: tango: Add Sigma Designs Tango SMP8759 PCIe host bridge support PCI: Add DT binding for Sigma Designs Tango PCIe controller PCI: rockchip: Use normal register bank for config accessors dt-bindings: PCI: Add documentation for MediaTek PCIe PCI: Remove __pci_dev_reset() and pci_dev_reset() PCI: Split ->reset_notify() method into ->reset_prepare() and ->reset_done() PCI: xilinx: Make of_device_ids const PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts PCI: vmd: Move SRCU cleanup after bus, child device removal PCI: vmd: Correct comment: VMD domains start at 0x10000, not 0x1000 PCI: versatile: Add local struct device pointers PCI: tegra: Do not allocate MSI target memory PCI: tegra: Support MSI 64-bit addressing PCI: rockchip: Use local struct device pointer consistently PCI: rockchip: Check for clk_prepare_enable() errors during resume MAINTAINERS: Remove Wenrui Li as Rockchip PCIe driver maintainer PCI: rockchip: Configure RC's MPS setting PCI: rockchip: Reconfigure configuration space header type PCI: rockchip: Split out rockchip_pcie_cfg_configuration_accesses() PCI: rockchip: Move configuration accesses into rockchip_pcie_cfg_atu() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/shli/md由 Linus Torvalds 提交于
Pull MD update from Shaohua Li: - fixed deadlock in MD suspend and a potential bug in bio allocation (Neil Brown) - fixed signal issue (Mikulas Patocka) - fixed typo in FailFast test (Guoqing Jiang) - other trival fixes * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: MD: fix sleep in atomic MD: fix a null dereference md: use a separate bio_set for synchronous IO. md: change the initialization value for a spare device spot to MD_DISK_ROLE_SPARE md/raid1: remove unused bio in sync_request_write md/raid10: fix FailFast test for wrong device md: don't use flush_signals in userspace processes md: fix deadlock between mddev_suspend() and md_write_start()
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input updates from Dmitry Torokhov: - a new driver for STM FingerTip touchscreen - a new driver for D-Link DIR-685 touch keys - updated list of supported devices in xpad driver - other assorted updates and fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (23 commits) MAINTAINERS: update input subsystem patterns Input: introduce KEY_ASSISTANT Input: xpad - sync supported devices with XBCD Input: xpad - sync supported devices with 360Controller Input: xen-kbdfront - use string constants from PV protocol Input: stmfts - mark all PM functions as __maybe_unused Input: add support for the STMicroelectronics FingerTip touchscreen Input: add D-Link DIR-685 touchkeys driver Input: s3c2410_ts - handle return value of clk_prepare_enable Input: axp20x-pek - add wakeup support Input: synaptics-rmi4 - use %phN to form F34 configuration ID Input: synaptics-rmi4 - change a char type to u8 Input: sparse-keymap - remove sparse_keymap_free() Input: tsc2007 - move header file out of I2C realm Input: mms114 - move header file out of I2C realm Input: mcs - move header file out of I2C realm Input: lm8323 - move header file out of I2C realm Input: elantech - force relative mode on a certain module Input: elan_i2c - add support for fetching chip type on newer hardware Input: elan_i2c - check if device is there before really probing ...
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull dmaengine updates from Vinod Koul: - removal of AVR32 support in dw driver as AVR32 is gone - new driver for Broadcom stream buffer accelerator (SBA) RAID driver - add support for Faraday Technology FTDMAC020 in amba-pl08x driver - IOMMU support in pl330 driver - updates to bunch of drivers * tag 'dmaengine-4.13-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (36 commits) dmaengine: qcom_hidma: correct API violation for submit dmaengine: zynqmp_dma: Remove max len check in zynqmp_dma_prep_memcpy dmaengine: tegra-apb: Really fix runtime-pm usage dmaengine: fsl_raid: make of_device_ids const. dmaengine: qcom_hidma: allow ACPI/DT parameters to be overridden dmaengine: fsldma: set BWC, DAHTS and SAHTS values correctly dmaengine: Kconfig: Simplify the help text for MXS_DMA dmaengine: pl330: Delete unused functions dmaengine: Replace WARN_TAINT_ONCE() with pr_warn_once() dmaengine: Kconfig: Extend the dependency for MXS_DMA dmaengine: mxs: Use %zu for printing a size_t variable dmaengine: ste_dma40: Cleanup scatterlist layering violations dmaengine: imx-dma: cleanup scatterlist layering violations dmaengine: use proper name for the R-Car SoC dmaengine: imx-sdma: Fix compilation warning. dmaengine: imx-sdma: Handle return value of clk_prepare_enable dmaengine: pl330: Add IOMMU support to slave tranfers dmaengine: DW DMAC: Handle return value of clk_prepare_enable dmaengine: pl08x: use GENMASK() to create bitmasks dmaengine: pl08x: Add support for Faraday Technology FTDMAC020 ...
-
git://git.armlinux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM updates from Russell King: - add support for ftrace-with-registers, which is needed for kgraft and other ftrace tools - support for mremap() for the sigpage/vDSO so that checkpoint/restore can work - add timestamps to each line of the register dump output - remove the unused KTHREAD_SIZE from nommu - align the ARM bitops APIs with the generic API (using unsigned long pointers rather than void pointers) - make the configuration of userspace Thumb support an expert option so that we can default it on, and avoid some hard to debug userspace crashes * 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8684/1: NOMMU: Remove unused KTHREAD_SIZE definition ARM: 8683/1: ARM32: Support mremap() for sigpage/vDSO ARM: 8679/1: bitops: Align prototypes to generic API ARM: 8678/1: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS ARM: make configuration of userspace Thumb support an expert option ARM: 8673/1: Fix __show_regs output timestamps
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next由 Linus Torvalds 提交于
Pull sparc updates from David Miller: 1) Queued spinlocks and rwlocks for sparc64, from Babu Moger. 2) Some const'ification from Arvind Yadav. 3) LDC/VIO driver infrastructure changes to facilitate future upcoming drivers, from Jag Raman. 4) Initialize sched_clock() et al. early so that the initial printk timestamps are all done while the implementation is available and functioning. From Pavel Tatashin. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next: (38 commits) sparc: kernel: pmc: make of_device_ids const. sparc64: fix typo in property sparc64: add port_id to VIO device metadata sparc64: Enhance search for VIO device in MDESC sparc64: enhance VIO device probing sparc64: check if a client is allowed to register for MDESC notifications sparc64: remove restriction on VIO device name size sparc64: refactor code to obtain cfg_handle property from MDESC sparc64: add MDESC node name property to VIO device metadata sparc64: mdesc: use __GFP_REPEAT action modifier for VM allocation sparc64: expand MDESC interface sparc64: skip handshake for LDC channels in RAW mode sparc64: specify the device class in VIO version info. packet sparc64: ensure VIO operations are defined while being used sparc: kernel: apc: make of_device_ids const sparc/time: make of_device_ids const sparc64: broken %tick frequency on spitfire cpus sparc64: use prom interface to get %stick frequency sparc64: optimize functions that access tick sparc64: add hot-patched and inlined get_tick() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: "Mostly fixing some light fallout from the changes that went into the merge window. 1) Fix memory leaks on network namespace teardown in netfilter, from Liping Zhang. 2) When comparing ipv6 nexthops, we have to take the lightweight tunnel state into account as well. From David Ahern. 3) Fix socket option object length check in the new TLS code, from Matthias Rosenfelder. 4) Fix memory leak in nfp driver flower support, from Jakub Kicinski. 5) Several netlink attribute validation fixes in cfg80211, from Srinivas Dasari. 6) Fix context array leak in virtio_net, from Jason Wang. 7) SKB use after free in hns driver, from Yusheng Lin. 8) Fix socket leak on accept() in RDS, from Sowmini Varadhan. Also add a WARN_ON() to sock_graft() so other protocol stacks don't trip over this as well" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) net: ethernet: mediatek: remove useless code in mtk_probe() mpls: fix uninitialized in_label var warning in mpls_getroute doc: SKB_GSO_[IPIP|SIT] have been replaced bonding: avoid NETDEV_CHANGEMTU event when unregistering slave net/sock: add WARN_ON(parent->sk) in sock_graft() rds: tcp: use sock_create_lite() to create the accept socket net: hns: Fix a skb used after free bug net: hns: Fix a wrong op phy C45 code net: macb: Adding Support for Jumbo Frames up to 10240 Bytes in SAMA5D3 net: Update networking MAINTAINERS entry. virtio-net: fix leaking of ctx array cfg80211: Validate frequencies nested in NL80211_ATTR_SCAN_FREQUENCIES cfg80211: Define nla_policy for NL80211_ATTR_LOCAL_MESH_POWER_MODE cfg80211: Check if NAN service ID is of expected size cfg80211: Check if PMKID attribute is of expected size arcnet: com20020-pci: Fix an error handling path in 'com20020pci_probe()' nfp: flower: add missing clean up call to avoid memory leaks vrf: fix bug_on triggered by rx when destroying a vrf ptp: dte: Use LL suffix for 64-bit constants sctp: set the value of flowi6_oif to sk_bound_dev_if to make sctp_v6_get_dst to find the correct route entry. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull misc filesystem updates from Al Viro: "Assorted normal VFS / filesystems stuff..." * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: dentry name snapshots Make statfs properly return read-only state after emergency remount fs/dcache: init in_lookup_hashtable minix: Deinline get_block, save 2691 bytes fs: Reorder inode_owner_or_capable() to avoid needless fs: warn in case userspace lied about modprobe return
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull spi uaccess delousing from Al Viro: "Getting rid of pointless __get_user() and friends in drivers/spi. [ the only reason it's on a separate branch is that I hoped it would be picked by spi folks; looks like mail asking them to grab it got lost and I hadn't followed up on that ]" * 'for-spi' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: spidev: quit messing with access_ok()
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull __copy_in_user removal from Al Viro: "There used to be 6 places in the entire tree calling __copy_in_user(), all of them bogus. Four got killed off in work.drm branch, this takes care of the remaining ones and kills the definition of that sucker" * 'work.__copy_in_user' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: kill __copy_in_user() sanitize do_i2c_smbus_ioctl()
-
- 08 7月, 2017 19 次提交
-
-
由 Gustavo A. R. Silva 提交于
Remove useless local variables _match_, _soc_ and the code related. Notice that const struct of_device_id of_mtk_match[] = { { .compatible = "mediatek,mt2701-eth" }, {}, }; So match->data is NULL. Suggested-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roopa Prabhu 提交于
Fix the below warning generated by static checker: net/mpls/af_mpls.c:2111 mpls_getroute() error: uninitialized symbol 'in_label'." Fixes: 397fc9e5 ("mpls: route get support") Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
Those enum values don't exist anymore. Fixes: 7e13318d ("net: define gso types for IPx over IPv4 and IPv6") CC: Tom Herbert <tom@herbertland.com> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
As Hongjun/Nicolas summarized in their original patch: " When a device changes from one netns to another, it's first unregistered, then the netns reference is updated and the dev is registered in the new netns. Thus, when a slave moves to another netns, it is first unregistered. This triggers a NETDEV_UNREGISTER event which is caught by the bonding driver. The driver calls bond_release(), which calls dev_set_mtu() and thus triggers NETDEV_CHANGEMTU (the device is still in the old netns). " This is a very special case, because the device is being unregistered no one should still care about the NETDEV_CHANGEMTU event triggered at this point, we can avoid broadcasting this event on this path, and avoid touching inetdev_event()/addrconf_notify() path. It requires to export __dev_set_mtu() to bonding driver. Reported-by: NHongjun Li <hongjun.li@6wind.com> Reported-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Sowmini Varadhan says: ==================== rds-tcp: sock_graft() leak Following up on the discussion at https://www.spinics.net/lists/netdev/msg442859.html - make rds_tcp_accept_one() call sock_create_lite() - add a WARN_ON() to sock_graft() Tested by running an infinite while() loop that does (module-load; rds-stress; module-unload) and monitors TCP slabinfo while the test is running. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
sock_graft() unilaterally sets up parent->sk based on the assumption that the existing parent->sk is null. If this condition is not true, then the existing parent->sk would be leaked, so add a WARN_ON() to alert callers who may fall in this category. Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
There are two problems with calling sock_create_kern() from rds_tcp_accept_one() 1. it sets up a new_sock->sk that is wasteful, because this ->sk is going to get replaced by inet_accept() in the subsequent ->accept() 2. The new_sock->sk is a leaked reference in sock_graft() which expects to find a null parent->sk Avoid these problems by calling sock_create_lite(). Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Lin Yun Sheng says: ==================== Bugfixs for hns ethernet driver This patchset fix skb used after free and C45 op code issues in hns driver. Patch V2: 1. Remove ndev->feature checking in TX description patch. 2. Add Fixes: Tag in patch description. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yunsheng Lin 提交于
skb maybe freed in hns_nic_net_xmit_hw() and return NETDEV_TX_OK, which cause hns_nic_net_xmit to use a freed skb. BUG: KASAN: use-after-free in hns_nic_net_xmit_hw+0x62c/0x940... [17659.112635] alloc_debug_processing+0x18c/0x1a0 [17659.117208] __slab_alloc+0x52c/0x560 [17659.120909] kmem_cache_alloc_node+0xac/0x2c0 [17659.125309] __alloc_skb+0x6c/0x260 [17659.128837] tcp_send_ack+0x8c/0x280 [17659.132449] __tcp_ack_snd_check+0x9c/0xf0 [17659.136587] tcp_rcv_established+0x5a4/0xa70 [17659.140899] tcp_v4_do_rcv+0x27c/0x620 [17659.144687] tcp_prequeue_process+0x108/0x170 [17659.149085] tcp_recvmsg+0x940/0x1020 [17659.152787] inet_recvmsg+0x124/0x180 [17659.156488] sock_recvmsg+0x64/0x80 [17659.160012] SyS_recvfrom+0xd8/0x180 [17659.163626] __sys_trace_return+0x0/0x4 [17659.167506] INFO: Freed in kfree_skbmem+0xa0/0xb0 age=23 cpu=1 pid=13 [17659.174000] free_debug_processing+0x1d4/0x2c0 [17659.178486] __slab_free+0x240/0x390 [17659.182100] kmem_cache_free+0x24c/0x270 [17659.186062] kfree_skbmem+0xa0/0xb0 [17659.189587] __kfree_skb+0x28/0x40 [17659.193025] napi_gro_receive+0x168/0x1c0 [17659.197074] hns_nic_rx_up_pro+0x58/0x90 [17659.201038] hns_nic_rx_poll_one+0x518/0xbc0 [17659.205352] hns_nic_common_poll+0x94/0x140 [17659.209576] net_rx_action+0x458/0x5e0 [17659.213363] __do_softirq+0x1b8/0x480 [17659.217062] run_ksoftirqd+0x64/0x80 [17659.220679] smpboot_thread_fn+0x224/0x310 [17659.224821] kthread+0x150/0x170 [17659.228084] ret_from_fork+0x10/0x40 BUG: KASAN: use-after-free in hns_nic_net_xmit+0x8c/0xc0... [17751.080490] __slab_alloc+0x52c/0x560 [17751.084188] kmem_cache_alloc+0x244/0x280 [17751.088238] __build_skb+0x40/0x150 [17751.091764] build_skb+0x28/0x100 [17751.095115] __alloc_rx_skb+0x94/0x150 [17751.098900] __napi_alloc_skb+0x34/0x90 [17751.102776] hns_nic_rx_poll_one+0x180/0xbc0 [17751.107097] hns_nic_common_poll+0x94/0x140 [17751.111333] net_rx_action+0x458/0x5e0 [17751.115123] __do_softirq+0x1b8/0x480 [17751.118823] run_ksoftirqd+0x64/0x80 [17751.122437] smpboot_thread_fn+0x224/0x310 [17751.126575] kthread+0x150/0x170 [17751.129838] ret_from_fork+0x10/0x40 [17751.133454] INFO: Freed in kfree_skbmem+0xa0/0xb0 age=19 cpu=7 pid=43 [17751.139951] free_debug_processing+0x1d4/0x2c0 [17751.144436] __slab_free+0x240/0x390 [17751.148051] kmem_cache_free+0x24c/0x270 [17751.152014] kfree_skbmem+0xa0/0xb0 [17751.155543] __kfree_skb+0x28/0x40 [17751.159022] napi_gro_receive+0x168/0x1c0 [17751.163074] hns_nic_rx_up_pro+0x58/0x90 [17751.167041] hns_nic_rx_poll_one+0x518/0xbc0 [17751.171358] hns_nic_common_poll+0x94/0x140 [17751.175585] net_rx_action+0x458/0x5e0 [17751.179373] __do_softirq+0x1b8/0x480 [17751.183076] run_ksoftirqd+0x64/0x80 [17751.186691] smpboot_thread_fn+0x224/0x310 [17751.190826] kthread+0x150/0x170 [17751.194093] ret_from_fork+0x10/0x40 Fixes: 13ac695e ("net:hns: Add support of Hip06 SoC to the Hislicon Network Subsystem") Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Nlipeng <lipeng321@huawei.com> Reported-by: NJun He <hjat2005@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yunsheng Lin 提交于
As the user manual described, the second step to write to C45 phy by mdio should be data, but not address. Here we should fix this issue. Fixes: 5b904d39 ("net: add Hisilicon Network Subsystem MDIO support") Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com> Reviewed-by: Nlipeng <lipeng321@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 vishnuvardhan 提交于
As per the SAMA5D3 device specification it supports Jumbo frames. But the suggested flag and length of bytes it supports was not updated in this driver config_structure. The maximum jumbo frames the device supports : 10240 bytes as per the device spec. While changing the MTU value greater than 1500, it threw error: sudo ifconfig eth1 mtu 9000 SIOCSIFMTU: Invalid argument Add this support to driver so that it works as expected and designed. Signed-off-by: Nvishnuvardhan <vardhanraj4143@gmail.com> [nicolas.ferre@microchip.com: modify slightly commit msg] Signed-off-by: NNicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull read/write fix from Al Viro: "file_start_write()/file_end_write() got mixed into vfs_iter_write() by accident; that's a deadlock for all existing callers - they already do that, some - quite a bit outside. Easily fixed, fortunately" * 'work.read_write' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: move file_{start,end}_write() out of do_iter_write()
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull iov_iter hardening from Al Viro: "This is the iov_iter/uaccess/hardening pile. For one thing, it trims the inline part of copy_to_user/copy_from_user to the minimum that *does* need to be inlined - object size checks, basically. For another, it sanitizes the checks for iov_iter primitives. There are 4 groups of checks: access_ok(), might_fault(), object size and KASAN. - access_ok() had been verified by whoever had set the iov_iter up. However, that has happened in a function far away, so proving that there's no path to actual copying bypassing those checks is hard and proving that iov_iter has not been buggered in the meanwhile is also not pleasant. So we want those redone in actual copyin/copyout. - might_fault() is better off consolidated - we know whether it needs to be checked as soon as we enter iov_iter primitive and observe the iov_iter flavour. No need to wait until the copyin/copyout. The call chains are short enough to make sure we won't miss anything - in fact, it's more robust that way, since there are cases where we do e.g. forced fault-in before getting to copyin/copyout. It's not quite what we need to check (in particular, combination of iovec-backed and set_fs(KERNEL_DS) is almost certainly a bug, not a cause to skip checks), but that's for later series. For now let's keep might_fault(). - KASAN checks belong in copyin/copyout - at the same level where other iov_iter flavours would've hit them in memcpy(). - object size checks should apply to *all* iov_iter flavours, not just iovec-backed ones. There are two groups of primitives - one gets the kernel object described as pointer + size (copy_to_iter(), etc.) while another gets it as page + offset + size (copy_page_to_iter(), etc.) For the first group the checks are best done where we actually have a chance to find the object size. In other words, those belong in inline wrappers in uio.h, before calling into iov_iter.c. Same kind as we have for inlined part of copy_to_user(). For the second group there is no object to look at - offset in page is just a number, it bears no type information. So we do them in the common helper called by iov_iter.c primitives of that kind. All it currently does is checking that we are not trying to access outside of the compound page; eventually we might want to add some sanity checks on the page involved. So the things we need in copyin/copyout part of iov_iter.c do not quite match anything in uaccess.h (we want no zeroing, we *do* want access_ok() and KASAN and we want no might_fault() or object size checks done on that level). OTOH, these needs are simple enough to provide a couple of helpers (static in iov_iter.c) doing just what we need..." * 'uaccess-work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: iov_iter: saner checks on copyin/copyout iov_iter: sanity checks for copy to/from page primitives iov_iter/hardening: move object size checks to inlined part copy_{to,from}_user(): consolidate object size checks copy_{from,to}_user(): move kasan checks and might_fault() out-of-line
-
由 Kees Cook 提交于
To avoid pathological stack usage or the need to special-case setuid execs, just limit all arg stack usage to at most 75% of _STK_LIM (6MB). Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux由 Linus Torvalds 提交于
Pull Writeback error handling updates from Jeff Layton: "This pile represents the bulk of the writeback error handling fixes that I have for this cycle. Some of the earlier patches in this pile may look trivial but they are prerequisites for later patches in the series. The aim of this set is to improve how we track and report writeback errors to userland. Most applications that care about data integrity will periodically call fsync/fdatasync/msync to ensure that their writes have made it to the backing store. For a very long time, we have tracked writeback errors using two flags in the address_space: AS_EIO and AS_ENOSPC. Those flags are set when a writeback error occurs (via mapping_set_error) and are cleared as a side-effect of filemap_check_errors (as you noted yesterday). This model really sucks for userland. Only the first task to call fsync (or msync or fdatasync) will see the error. Any subsequent task calling fsync on a file will get back 0 (unless another writeback error occurs in the interim). If I have several tasks writing to a file and calling fsync to ensure that their writes got stored, then I need to have them coordinate with one another. That's difficult enough, but in a world of containerized setups that coordination may even not be possible. But wait...it gets worse! The calls to filemap_check_errors can be buried pretty far down in the call stack, and there are internal callers of filemap_write_and_wait and the like that also end up clearing those errors. Many of those callers ignore the error return from that function or return it to userland at nonsensical times (e.g. truncate() or stat()). If I get back -EIO on a truncate, there is no reason to think that it was because some previous writeback failed, and a subsequent fsync() will (incorrectly) return 0. This pile aims to do three things: 1) ensure that when a writeback error occurs that that error will be reported to userland on a subsequent fsync/fdatasync/msync call, regardless of what internal callers are doing 2) report writeback errors on all file descriptions that were open at the time that the error occurred. This is a user-visible change, but I think most applications are written to assume this behavior anyway. Those that aren't are unlikely to be hurt by it. 3) document what filesystems should do when there is a writeback error. Today, there is very little consistency between them, and a lot of cargo-cult copying. We need to make it very clear what filesystems should do in this situation. To achieve this, the set adds a new data type (errseq_t) and then builds new writeback error tracking infrastructure around that. Once all of that is in place, we change the filesystems to use the new infrastructure for reporting wb errors to userland. Note that this is just the initial foray into cleaning up this mess. There is a lot of work remaining here: 1) convert the rest of the filesystems in a similar fashion. Once the initial set is in, then I think most other fs' will be fairly simple to convert. Hopefully most of those can in via individual filesystem trees. 2) convert internal waiters on writeback to use errseq_t for detecting errors instead of relying on the AS_* flags. I have some draft patches for this for ext4, but they are not quite ready for prime time yet. This was a discussion topic this year at LSF/MM too. If you're interested in the gory details, LWN has some good articles about this: https://lwn.net/Articles/718734/ https://lwn.net/Articles/724307/" * tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux: btrfs: minimal conversion to errseq_t writeback error reporting on fsync xfs: minimal conversion to errseq_t writeback error reporting ext4: use errseq_t based error handling for reporting data writeback errors fs: convert __generic_file_fsync to use errseq_t based reporting block: convert to errseq_t based writeback error tracking dax: set errors in mapping when writeback fails Documentation: flesh out the section in vfs.txt on storing and reporting writeback errors mm: set both AS_EIO/AS_ENOSPC and errseq_t in mapping_set_error fs: new infrastructure for writeback error handling and reporting lib: add errseq_t type and infrastructure for handling it mm: don't TestClearPageError in __filemap_fdatawait_range mm: clear AS_EIO/AS_ENOSPC when writeback initiation fails jbd2: don't clear and reset errors after waiting on writeback buffer: set errors in mapping at the time that the error occurs fs: check for writeback errors after syncing out buffers in generic_file_fsync buffer: use mapping_set_error instead of setting the flag mm: fix mapping_set_error call in me_pagecache_dirty
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux由 Linus Torvalds 提交于
Pull Writeback error handling fixes from Jeff Layton: "The main rationale for all of these changes is to tighten up writeback error reporting to userland. There are many ways now that writeback errors can be lost, such that fsync/fdatasync/msync return 0 when writeback actually failed. This pile contains a small set of cleanups and writeback error handling fixes that I was able to break off from the main pile (#2). Two of the patches in this pile are trivial. The exceptions are the patch to fix up error handling in write_one_page, and the patch to make JFS pay attention to write_one_page errors" * tag 'for-linus-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux: fs: remove call_fsync helper function mm: clean up error handling in write_one_page JFS: do not ignore return code from write_one_page() mm: drop "wait" parameter from write_one_page()
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull cifs fixes from Steve French: "First set of CIFS/SMB3 fixes for the merge window. Also improves POSIX character mapping for SMB3" * tag 'cifs-bug-fixes-for-4.13' of git://git.samba.org/sfrench/cifs-2.6: CIFS: fix circular locking dependency cifs: set oparms.create_options rather than or'ing in CREATE_OPEN_BACKUP_INTENT cifs: Do not modify mid entry after submitting I/O in cifs_call_async CIFS: add SFM mapping for 0x01-0x1F cifs: hide unused functions cifs: Use smb 2 - 3 and cifsacl mount options getacl functions cifs: prototype declaration and definition for smb 2 - 3 and cifsacl mount options CIFS: add CONFIG_CIFS_DEBUG_KEYS to dump encryption keys cifs: set mapping error when page writeback fails in writepage or launder_pages SMB3: Enable encryption for SMB3.1.1
-
由 Linus Torvalds 提交于
Merge tag 'gfs2-4.13.fixes.addendum' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull GFS2 fix from Bob Peterson: "Sorry for the additional merge request, but Andreas discovered this problem soon after you processed our last gfs2 merge. This fixes a regression introduced by a patch we did in mid-2015 (commit 88ffbf3e: "GFS2: Use resizable hash table for glocks"), so best to get it fixed. Some code was reverted that should not have been. The patch from Andreas Gruenbacher just re-adds code that had been there originally" * tag 'gfs2-4.13.fixes.addendum' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Fix glock rhashtable rcu bug
-
由 Al Viro 提交于
take_dentry_name_snapshot() takes a safe snapshot of dentry name; if the name is a short one, it gets copied into caller-supplied structure, otherwise an extra reference to external name is grabbed (those are never modified). In either case the pointer to stable string is stored into the same structure. dentry must be held by the caller of take_dentry_name_snapshot(), but may be freely dropped afterwards - the snapshot will stay until destroyed by release_dentry_name_snapshot(). Intended use: struct name_snapshot s; take_dentry_name_snapshot(&s, dentry); ... access s.name ... release_dentry_name_snapshot(&s); Replaces fsnotify_oldname_...(), gets used in fsnotify to obtain the name to pass down with event. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-