[ Upstream commit 0deae39cec6dab3a66794f3e9e83ca4dc30080f1 ]

When the watchdog timer is set in interrupt mode, it causes a
machine check when it times out. The purpose of this mode is to
ease debugging, not to crash the kernel and reboot the machine.

This patch implements a special handling for that, in order to not
crash the kernel if the watchdog times out while in interrupt or
within the idle task.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
[scottwood: added missing #include]
Signed-off-by: NScott Wood <oss@buserror.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit cd07e3701fa6a4c68f8493ee1d12caa18d46ec6a ]

tps65910_reg_set_bits() may fail. The fix checks if it fails, and if so,
returns with its error code.
Signed-off-by: NKangjie Lu <kjlu@umn.edu>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 77ea5f4cbe2084db9ab021ba73fb7eadf1610884 ]

The frame_size passed to build_skb must be aligned, else it is
possible that the embedded struct skb_shared_info gets unaligned.

For correctness make sure that xdpf->headroom in included in the
alignment. No upstream drivers can hit this, as all XDP drivers provide
an aligned headroom.  This was discovered when playing with implementing
XDP support for mvneta, which have a 2 bytes DSA header, and this
Marvell ARM64 platform didn't like doing atomic operations on an
unaligned skb_shinfo(skb)->dataref addresses.

Fixes: 1c601d82 ("bpf: cpumap xdp_buff to skb conversion and allocation")
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d5108e69fe013ff47ab815b849caba9cc33ca1e5 ]

Current rxe device counters are not thread safe.
When multiple QPs are used, they can be racy.
Make them thread safe by making it atomic64.

Fixes: 0b1e5b99 ("IB/rxe: Add port protocol stats")
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2c38f035117331eb78d0504843c79ea7c7fabf37 ]

print_st_err() is defined with its 4th argument taking an
'enum drbd_state_rv' but its prototype use an int for it.

Fix this by using 'enum drbd_state_rv' in the prototype too.
Signed-off-by: NLuc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: NRoland Kammerer <roland.kammerer@linbit.com>
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f708bd08ecbdc23d03aaedf5b3311ebe44cfdb50 ]

"suspending" IO is overloaded.
It can mean "do not allow new requests" (obviously),
but it also may mean "must not complete pending IO",
for example while the fencing handlers do their arbitration.

When adjusting disk options, we suspend io (disallow new requests), then
wait for the activity-log to become unused (drain all IO completions),
and possibly replace it with a new activity log of different size.

If the other "suspend IO" aspect is active, pending IO completions won't
happen, and we would block forever (unkillable drbdsetup process).

Fix this by skipping the activity log adjustment if the "al-extents"
setting did not change. Also, in case it did change, fail early without
blocking if it looks like we would block forever.
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit fe43ed97bba3b11521abd934b83ed93143470e4f ]

Multiple failure scenario:
a) all good
   Connected Primary/Secondary UpToDate/UpToDate
b) lose disk on Primary,
   Connected Primary/Secondary Diskless/UpToDate
c) continue to write to the device,
   changes only make it to the Secondary storage.
d) lose disk on Secondary,
   Connected Primary/Secondary Diskless/Diskless
e) now try to re-attach on Primary

This would have succeeded before, even though that is clearly the
wrong data set to attach to (missing the modifications from c).
Because we only compared our "effective" and the "to-be-attached"
data generation uuid tags if (device->state.conn < C_CONNECTED).

Fix: change that constraint to (device->state.pdsk != D_UP_TO_DATE)
compare the uuids, and reject the attach.

This patch also tries to improve the reverse scenario:
first lose Secondary, then Primary disk,
then try to attach the disk on Secondary.

Before this patch, the attach on the Secondary succeeds, but since commit
drbd: disconnect, if the wrong UUIDs are attached on a connected peer
the Primary will notice unsuitable data, and drop the connection hard.

Though unfortunately at a point in time during the handshake where
we cannot easily abort the attach on the peer without more
refactoring of the handshake.

We now reject any attach to "unsuitable" uuids,
as long as we can see a Primary role,
unless we already have access to "good" data.
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 94c43a13b8d6e3e0dd77b3536b5e04a84936b762 ]

During handshake, if we are diskless ourselves, we used to accept any size
presented by the peer.

Which could be zero if that peer was just brought up and connected
to us without having a disk attached first, in which case both
peers would just "flip" their volume sizes.

Now, even a diskless node will ignore "zero" sizes
presented by a diskless peer.

Also a currently Diskless Primary will refuse to shrink during handshake:
it may be frozen, and waiting for a "suitable" local disk or peer to
re-appear (on-no-data-accessible suspend-io). If the peer is smaller
than what we used to be, it is not suitable.

The logic for a diskless node during handshake is now supposed to be:
believe the peer, if
 - I don't have a current size myself
 - we agree on the size anyways
 - I do have a current size, am Secondary, and he has the only disk
 - I do have a current size, am Primary, and he has the only disk,
   which is larger than my current size
Signed-off-by: NLars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c20577014f85f36d4e137d3d52a1f61225b4a3d2 ]

The current implementation of the OPAL_PCI_EEH_FREEZE_STATUS call in
skiboot's NPU driver does not touch the pci_error_type parameter so
it might have garbage but the powernv code analyzes it nevertheless.

This initializes pcierr and fstate to zero in all call sites.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NSam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 517ad4ae8aa93dccdb9a88c27257ecb421c9e848 ]

As a part of cleanup, the SPAPR TCE IOMMU subdriver releases preregistered
memory. If there is a bug in memory release, the loop in
tce_iommu_release() becomes infinite; this actually happened to me.

This makes the loop finite and prints a warning on every failure to make
the code more bug prone.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Acked-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3cfb9ebe906b51f2942b1e251009bb251efd2ba6 ]

The bamboo dts has a bug: it uses a non-naturally aligned range
for PCI memory space. This isnt' supported by the code, thus
causing PCI to break on this system.

This is due to the fact that while the chip memory map has 1G
reserved for PCI memory, it's only 512M aligned. The code doesn't
know how to split that into 2 different PMMs and fails, so limit
the region to 512M.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 49a502ea23bf9dec47f8f3c3960909ff409cd1bb ]

As several other arches including x86, this patch makes it explicit
that a bad page fault is a NULL pointer dereference when the fault
address is lower than PAGE_SIZE

In the mean time, this page makes all bad_page_fault() messages
shorter so that they remain on one single line. And it prefixes them
by "BUG: " so that they get easily grepped.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
[mpe: Avoid pr_cont()]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b18f0ae92b0a1db565c3e505fa87b6971ad3b641 ]

This patch fixes early DEBUG messages in prom.c:
- Use %px instead of %p to see the addresses
- Cast memblock_phys_mem_size() with (unsigned long long) to
avoid build failure when phys_addr_t is not 64 bits.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 72e7bcc2cdf82bf03caaa5e6c9b0134c2fc2ee7d ]

When building for ppc32 with clang these flags are unsupported:

  -ffixed-r2 and -mmultiple

llvm's lib/Target/PowerPC/PPCRegisterInfo.cpp marks r2 as reserved on
when building for SVR4ABI and !ppc64:

  // The SVR4 ABI reserves r2 and r13
  if (Subtarget.isSVR4ABI()) {
    // We only reserve r2 if we need to use the TOC pointer. If we have no
    // explicit uses of the TOC pointer (meaning we're a leaf function with
    // no constant-pool loads, etc.) and we have no potential uses inside an
    // inline asm block, then we can treat r2 has an ordinary callee-saved
    // register.
    const PPCFunctionInfo *FuncInfo = MF.getInfo<PPCFunctionInfo>();
    if (!TM.isPPC64() || FuncInfo->usesTOCBasePtr() || MF.hasInlineAsm())
      markSuperRegs(Reserved, PPC::R2);  // System-reserved register
    markSuperRegs(Reserved, PPC::R13); // Small Data Area pointer register
  }

This means we can safely omit -ffixed-r2 when building for 32-bit
targets.

The -mmultiple/-mno-multiple flags are not supported by clang, so
platforms that might support multiple miss out on using multiple word
instructions.

We wrap these flags in cc-option so that when Clang gains support the
kernel will be able use these flags.

Clang 8 can then build a ppc44x_defconfig which boots in Qemu:

  make CC=clang-8 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu-  ppc44x_defconfig
  ./scripts/config -e CONFIG_DEVTMPFS -d DEVTMPFS_MOUNT
  make CC=clang-8 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu-

  qemu-system-ppc -M bamboo \
   -kernel arch/powerpc/boot/zImage \
   -dtb arch/powerpc/boot/dts/bamboo.dtb \
   -initrd ~/ppc32-440-rootfs.cpio \
   -nographic -serial stdio -monitor pty -append "console=ttyS0"

Link: https://github.com/ClangBuiltLinux/linux/issues/261
Link: https://bugs.llvm.org/show_bug.cgi?id=39556
Link: https://bugs.llvm.org/show_bug.cgi?id=39555Signed-off-by: NJoel Stanley <joel@jms.id.au>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2d46d4877b1afd14059393a48bdb8ce27955174c ]

Raw event code has couple of fields "unit" and "cache" in it, to capture
the "unit" to monitor for a given pmcxsel and cache reload qualifier to
program in MMCR1.

isa207_get_constraint() refers "unit" field to update the MMCRC (L2/L3)
Event bus control fields with "cache" bits of the raw event code.
These are power8 specific and not supported by PowerISA v3.0 pmu. So wrap
the checks to be power8 specific. Also, "cache" bit field is referred to
update MMCR1[16:17] and this check can be power8 specific.

Fixes: 7ffd948f ('powerpc/perf: factor out power8 pmu functions')
Signed-off-by: NMadhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5803c12816c43bd09e5f4247dd9313c2d9a2c41b ]

When ath6kl was reworked to share code between regular and scheduled scans
in commit 3b8ffc6a ("ath6kl: Configure probed SSID list consistently"),
probed SSID entry changed from 1-index to 0-indexed. However,
ath6kl_cfg80211_scan_complete_event() was missed in that change. Fix its
indexing so that we correctly clear out the probed SSID list.
Signed-off-by: NKyle Roeschley <kyle.roeschley@ni.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit fb376a495fbdb886f38cfaf5a3805401b9e46f13 ]

Commit dd45b759 ("ath6kl: Include match ssid list in scheduled scan")
merged the probed and matched SSID lists before sending them to the
firmware. In the process, it assumed match set support is always available
in ath6kl_set_probed_ssids, which breaks scans for hidden SSIDs. Now, check
that the firmware supports matching SSIDs in scheduled scans before setting
MATCH_SSID_FLAG.

Fixes: dd45b759 ("ath6kl: Include match ssid list in scheduled scan")
Signed-off-by: NKyle Roeschley <kyle.roeschley@ni.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 861cb5eb467f5e38dce1aabe4e8db379255bd89b ]

Since commit 1204aa17 ("brcmfmac: set WIPHY_FLAG_HAVE_AP_SME flag")
the Raspberry Pi 3 A+ (BCM43455) isn't able to operate in AP mode with
hostapd (device_ap_sme=1 use_monitor=0):

brcmfmac: brcmf_cfg80211_stop_ap: setting AP mode failed -52

So add the missing mgmt_stypes for AP mode to fix this.

Fixes: 1204aa17 ("brcmfmac: set WIPHY_FLAG_HAVE_AP_SME flag")
Suggested-by: NArend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
Acked-by: NArend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9934613edcb40b92a216122876cd3b7e76d08390 ]

In case of ->vport_create() call scsi_add_host_with_dma() instead of
scsi_add_host() to pass correct dma device.
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 17b18eaa6f59044a5172db7d07149e31ede0f920 ]

The intent of invoking configfs_depend_item in commit 7474f52a
("tcm_qla2xxx: Perform configfs depend/undepend for base_tpg")
was to prevent a physical Fibre Channel port removal when
virtual (NPIV) ports announced through that physical port are active.
The change does not work as expected: it makes enabled physical port
dependent on target configfs subsystem (the port's parent), something
the configfs guarantees anyway.

Besides, scheduling work in a worker thread and waiting for the work's
completion is not really a valid workaround for the requirement not to call
configfs_depend_item from a configfs callback: the call occasionally
deadlocks.

Thus, removing configfs_depend_item calls does not break anything and fixes
the deadlock problem.
Signed-off-by: NAnatoliy Glagolev <glagolig@gmail.com>
Acked-by: NHimanshu Madhani <hmadhani@marvell.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2ee00f6a98c36f7e4ba07cc33f24cc5a69060cc9 ]

This patch avoids that the SCSI mid-layer keeps retrying forever if
ib_post_send() fails. This was discovered while testing immediate
data support and passing a too large num_sge value to ib_post_send().

Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 57ce8ba0fd3a95bf29ed741df1c52bd591bf43ff ]

OpenRISC was mainlined as "openrisc", not "or32".
vmlinux.lds is generated from vmlinux.lds.S.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NStafford Horne <shorne@gmail.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a8da3c7873ea57acb8f9cea58c0af477522965aa ]

Function max310x_tx_empty() accesses the IRQSTS register, which is
cleared by IC when reading, so if there is an interrupt status, we
will lose it. This patch implement the transmitter check only by
the current FIFO level.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 22bba80500fdf624a7cfbb65fdfa97a038ae224d ]

The Broadcom controller on aries S5PV210 boards sends out a couple of
unknown packets after the firmware is loaded.  This will cause
logging of errors such as:
	Bluetooth: hci0: Frame reassembly failed (-84)

This is probably also the case with other boards, as there are related
Android userspace patches for custom ROMs such as
https://review.lineageos.org/#/c/LineageOS/android_system_bt/+/142721/
Since this appears to be intended behaviour, treated them as diagnostic
packets.

Note that this is another variant of commit 01d5e44a
("Bluetooth: hci_bcm: Handle empty packet after firmware loading")
Signed-off-by: NJonathan Bakker <xc-racer2@live.ca>
Signed-off-by: NPaweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 966e927bf8cc6a44f8b72582a1d6d3ffc73b12ad ]

If palmas_smps_read() fails, we should not use the read data in "reg"
which may contain random value. The fix inserts a check for the return
value of palmas_smps_read(): If it fails, we return the error code
upstream and stop using "reg".
Signed-off-by: NKangjie Lu <kjlu@umn.edu>
Signed-off-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 32c8c4c621897199e690760c2d57054f8b84b6e6 ]

mfsrin() takes segment num from bits 31-28 (IBM bits 0-3).
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
[mpe: Clarify bit numbering]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit e93ba1b7eb5b188c749052df7af1c90821c5f320 ]

This patch fixes the loop in p_block_mapped() and v_block_mapped()
to scan the entire bat_addrs[] array.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6db9246871394b3a136cd52001a0763676563840 ]

When a failure occurs in rtnl_configure_link(), the current code
calls unregister_netdevice() to roll back the earlier call to
register_netdevice(), and jumps to errout, which calls
vxlan_fdb_destroy().

However unregister_netdevice() calls transitively ndo_uninit, which is
vxlan_uninit(), and that already takes care of deleting the default FDB
entry by calling vxlan_fdb_delete_default(). Since the entry added
earlier in __vxlan_dev_create() is exactly the default entry, the
cleanup code in the errout block always leads to double free and thus a
panic.

Besides, since vxlan_fdb_delete_default() always destroys the FDB entry
with notification enabled, the deletion of the default entry is notified
even before the addition was notified.

Instead, move the unregister_netdevice() call after the manual destroy,
which solves both problems.

Fixes: 0241b836 ("vxlan: fix default fdb entry netlink notify ordering during netdev create")
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 86fe57fc47b17b3528fa5497fc57e158d846c4ea ]

TIMER_INTR_MASK register (Base Address of Timer + 0x38) is not designed
for masking interrupts on ast2500 chips, and it's not even listed in
ast2400 datasheet, so it's not safe to access TIMER_INTR_MASK on aspeed
chips.

Similarly, TIMER_INTR_STATE register (Base Address of Timer + 0x34) is
not interrupt status register on ast2400 and ast2500 chips. Although
there is no side effect to reset the register in fttmr010_common_init(),
it's just misleading to do so.

Besides, "count_down" is renamed to "is_aspeed" in "fttmr010" structure,
and more comments are added so the code is more readble.
Signed-off-by: NTao Ren <taoren@fb.com>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5050ae5fa3d54c8e83e1e447cc7e3591110a7f57 ]

We accidentally return success on this error path.

Fixes: f931551b ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7ca860e3c1a74ad6bd8949364073ef1044cad758 ]

The bulkstat family of ioctls are problematic on x32, because there is
a mixup of native 32-bit and 64-bit conventions.  The xfs_fsop_bulkreq
struct contains pointers and 32-bit integers so that matches the native
32-bit layout, and that means the ioctl implementation goes into the
regular compat path on x32.

However, the 'ubuffer' member of that struct in turn refers to either
struct xfs_inogrp or xfs_bstat (or an array of these).  On x32, those
structures match the native 64-bit layout.  The compat implementation
writes out the 32-bit version of these structures.  This is not the
expected format for x32 userspace, causing problems.

Fortunately the functions which actually output these xfs_inogrp and
xfs_bstat structures have an easy way to select which output format
is required, so we just need a little tweak to select the right format
on x32.
Signed-off-by: NNick Bowler <nbowler@draconx.ca>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c456d64449efe37da50832b63d91652a85ea1d20 ]

While inspecting the ioctl implementations, I noticed that the compat
implementation of XFS_IOC_ATTRLIST_BY_HANDLE does not do exactly the
same thing as the native implementation.  Specifically, the "cursor"
does not appear to be written out to userspace on the compat path,
like it is on the native path.

This adjusts the compat implementation to copy out the cursor just
like the native implementation does.  The attrlist cursor does not
require any special compat handling.  This fixes xfstests xfs/269
on both IA-32 and x32 userspace, when running on an amd64 kernel.
Signed-off-by: NNick Bowler <nbowler@draconx.ca>
Fixes: 0facef7f ("xfs: in _attrlist_by_handle, copy the cursor back to userspace")
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 74694bcbdf7e28a5ad548cdda9ac56d30be00d13 ]

Sending a check/repair message infrequently leads to -EBUSY instead of
properly identifying an active resync.  This occurs because
raid_message() is testing recovery bits in a racy way.

Fix by calling decipher_sync_action() from raid_message() to properly
identify the idle state of the RAID device.
Signed-off-by: NHeinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit bc0205612bbd4dd4026d4ba6287f5643c37366ec ]

Before this patch, function do_grow would not reserve enough journal
blocks in the transaction to unstuff jdata files while growing them.
This patch adds the logic to add one more block if the file to grow
is jdata.
Signed-off-by: NBob Peterson <rpeterso@redhat.com>
Reviewed-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a00f5276e26636cbf72f24f79831026d2e2868e7 ]

The flakey target is documented to be able to corrupt the Nth byte in
a bio, but does not corrupt byte indices after the first biovec in the
bio. Change the corrupting function to actually corrupt the Nth byte
no matter in which biovec that index falls.

A test device generating two-page bios, atop a flakey device configured
to corrupt a byte index on the second page, verified both the failure
to corrupt before this patch and the expected corruption after this
change.
Signed-off-by: NJohn Dorminy <jdorminy@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 46b14eef59a8157138dc02f916a7f97c73b3ec53 ]
Signed-off-by: NPeter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 054f2400f706327f96770219c3065b5131f8f154 ]

Some values in the Peripheral Function Select Register 10 descriptor are
shifted by one position, which may cause a peripheral function to be
programmed incorrectly.

Fixing this makes all HSCIF0 pins use Function 4 (value 3), like was
already the case for the HSCK0 pin in field IP10[5:3].

Fixes: ac1ebc21 ("sh-pfc: Add sh7734 pinmux support")
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1b99d0c80bbe1810572c2cb77b90f67886adfa8d ]

The Port F Control Register 3 (PFCR3) contains only a single field.
However, counting from left to right, it is the fourth field, not the
first field.
Insert the missing dummy configuration values (3 fields of 16 values) to
fix this.

The descriptor for the Port F Control Register 0 (PFCR0) lacks the
description for the 4th field (PF0 Mode, PF0MD[2:0]).
Add the missing configuration values to fix this.

Fixes: a8d42fc4 ("sh-pfc: Add sh7264 pinmux support")
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 755a5b805fa7ff22e2934d67501efd92109f41ea ]

The SEL_I2C1 (MOD_SEL0[21:20]) field in Module Select Register 0 has a
width of 2 bits, i.e. it allows programming one out of 4 different
configurations.
However, the MOD_SEL0_21_20 macro contains 8 values instead of 4,
overflowing into the subsequent fields in the register, and thus breaking
the configuration of the latter.

Fix this by dropping the bogus last 4 values, including the non-existent
SEL_I2C1_4 configuration.

Fixes: 6d4036a1 ("pinctrl: sh-pfc: Initial R8A77990 PFC support")
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 308c3e6673b012beecb96ef04cc65f4a0e7cdd99 ]

Make sure the debug feature and its allocated resources get
released upon unsuccessful architecture initialization.

A related indication of the issue will be reported as kernel
message.
Signed-off-by: NMichael Mueller <mimu@linux.ibm.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NPierre Morel <pmorel@linux.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20181130143215.69496-2-mimu@linux.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>