Add back the zero return value (activate workqueue) when
bdl_pos_adj is nonzero for position check.

Do the position related check only for first next period
using wallclk counter.

Return -1 value (ignore interrupt) when period_bytes
variable is zero.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Use 24Mhz WALLCLK register to ignore too early interrupts and
wrong interrupt status. The bad timing confuses the higher ALSA
layer and causes audio skipping. More information about behaviour
and debugging can be found in kernel bz#15912.

https://bugzilla.kernel.org/show_bug.cgi?id=15912Signed-off-by: NJaroslav Kysela <perex@perex.cz>

The HDA controller in US15W (Poulsbo) reports inaccurate position values
for capture streams when using the LPIB read method, resulting in
distorted recordings.

However, using the position buffer is broken for playback streams,
resulting in a fallback to the LPIB method with the current driver.
This patch works around the issue by independently detecting the read
position method for capture and playback streams.

The patch will not have any effect if the position fix method is
explicitly set.

[Code simplified by tiwai]
Signed-off-by: NShahin Ghazinouri <shahin.ghazinouri@pelagicore.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This reverts commit 7aee6746.

As it doesn't seem to be universally valid for all mainboard revisions of
the D945GCLF2 and breaks snd-hda-intel/ snd-hda-codec-realtek on the Intel
Corporation "D945GCLF2" (LF94510J.86A.0229.2009.0729.0209) mainboard.

00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01)
Signed-off-by: NStefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: <stable@kernel.org> [2.6.33]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch enables the SPDIF output pin by default. It also enables
it for quirks related to Levono docking stations (x200 and 25041,
identified with the same 17aa:20f2 ID). Even though not all Lenovo
docking stations have SPDIF connectors, enabling the pin by default
shouldn't be a problem for anyone.
Other quirks remain unmodified.
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Ideapad quirks working for my ThinkPad X100e (microphone is not tested).
Signed-off-by: NAndrej Gelenberg <andrej.gelenberg@udo.edu>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This reverts part of commit 52dc4386, in order to fix a regression:
broken SPDIF output on Intel DG45FC motherboard (IDT 92HD73E1X5 codec).

	--- DG45FC-IDT-codec-2.6.32  (SPDIF OK)
	+++ DG45FC-IDT-codec-2.6.33  (SPDIF broken)

	 Node 0x22 [Pin Complex] wcaps 0x400301: Stereo Digital
	   Pincap 0x00000010: OUT
	-  Pin Default 0x40f000f0: [N/A] Other at Ext N/A
	-    Conn = Unknown, Color = Unknown
	-    DefAssociation = 0xf, Sequence = 0x0
	-  Pin-ctls: 0x00:
	+  Pin Default 0x014510a0: [Jack] SPDIF Out at Ext Rear
	+    Conn = Optical, Color = Black
	+    DefAssociation = 0xa, Sequence = 0x0
	+  Pin-ctls: 0x40: OUT
	   Connection: 3
	      0x25* 0x20 0x21
	 Node 0x23 [Pin Complex] wcaps 0x400301: Stereo Digital
	   Pincap 0x00000010: OUT
	-  Pin Default 0x01451140: [Jack] SPDIF Out at Ext Rear
	+  Pin Default 0x074510b0: [Jack] SPDIF Out at Ext Rear Panel
	     Conn = Optical, Color = Black
	-    DefAssociation = 0x4, Sequence = 0x0
	-    Misc = NO_PRESENCE
	-  Pin-ctls: 0x40: OUT
	+    DefAssociation = 0xb, Sequence = 0x0
	+  Pin-ctls: 0x00:
	   Connection: 3
	      0x26* 0x20 0x21

Cc: <stable@kernel.org>
Cc: Alexey Fisher <bug-track@fisher-privat.net>
Tested-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We had a fixed external amp setup enabled for ALC888, but this seems
unnecessary.  The amps are controlled rather by GPIOs.
Let's remove it now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BugLink: https://launchpad.net/bugs/541802

The OR's hardware distorts at PCM 100% because it does not correspond to
0 dB. Fix this in patch_cxt5045() for all Packard Bell models.

Reported-by: Valombre
Cc: <stable@kernel.org>
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a quirk for all-in-one computer Dell Inspiron One 19 Touch to have proper
HP and Mic support.
Signed-off-by: NAnisse Astier <anisse@astier.eu>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BugLink: https://launchpad.net/bugs/549267

The OR verified that using the olpc-xo-1_5 model quirk allows the
headphones to be audible when inserted into the jack. Capture was
also verified to work correctly.

Reported-by: Richard Gagne
Tested-by: Richard Gagne
Cc: <stable@kernel.org>
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BugLink: https://launchpad.net/bugs/573284

The OR verified that using the olpc-xo-1_5 model quirk allows the
headphones to be audible when inserted into the jack. Capture was
also verified to work correctly.
Reported-by: NAndy Couldrake <acouldrake@googlemail.com>
Tested-by: NAndy Couldrake <acouldrake@googlemail.com>
Cc: <stable@kernel.org>
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This fixes a problem where cards show up as only having a single mixer
element, suppressing all sound output.
Signed-off-by: NBrian J. Tarricone <brian@tarricone.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BugLink: https://launchpad.net/bugs/568600

The OR has verified that the dell-m6 model quirk is necessary for audio
to be audible by default on the Dell Studio XPS 1645.

This change is necessary for 2.6.32.11 and 2.6.33.2 alike.
Reported-by: NAndy Ross <andy@plausible.org>
Tested-by: NAndy Ross <andy@plausible.org>
Cc: <stable@kernel.org>
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BugLink: https://launchpad.net/bugs/459083

The OR has verified with 2.6.32.11 and the latest alsa-driver stable
daily snapshot that position_fix=1 is necessary for the external mic
to work and for PulseAudio not to crash constantly.

This patch is necessary also for 2.6.32.11 and 2.6.33.2.

Reported-by: <imwithid@yahoo.com>
Tested-by: <imwithid@yahoo.com>
Cc: <stable@kernel.org>
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BugLink: https://launchpad.net/bugs/567494

The OR has verified that the existing model quirk, ALC880_UNIWILL,
is insufficient for audible playback and capture by default. Instead,
the ALC880_F1734 model quirk needs to be used.

This change is necessary for both 2.6.32.11 and 2.6.33.2.
Reported-by: NArnaud Malpeyre <amalpeyre@gmail.com>
Tested-by: NArnaud Malpeyre <amalpeyre@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BugLink: https://launchpad.net/bugs/553002

The OR has verified that the dell-m6 model quirk is necessary for audio
to be audible by default on the Dell Studio XPS 1645.

This change is necessary for 2.6.32.11 and 2.6.33.2 alike.

Reported-by: Robert Chambers
Tested-by: Robert Chambers
Cc: <stable@kernel.org>
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When HP laptop with AD1981 codec is suspended and the docking-station
is connected before the resume, the outputs get confused, and wrongly
routed still to the speaker.  This is because of a change in 2.6.34-rc1
ea52bf26
    ALSA: hda: Add powerdown for Analog Devices HDA codecs

The problem was the added resume callback that doesn't consider the
modified init hook.  The fix is simply remove the resume callback here
and make the resume normally.  This doesn't change any behavior intended
in the commit above (for shutting down the sound at suspend) but only
fixes the resume.
Reported-and-tested-by: NFrans Pop <elendil@planet.nl>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

attached please find a patch that adds support for at least the T410s
HDA codec.  Most likely it will also add support for the T410 and T510
based models.

The patch was derived from Ideapad support.  Support for the laptop's and
docking-station output connectors as well as the docking-station microphone
connector and the laptops internal devices has been tested.  Since it has been
developed without a data-sheet available, support for digital outputs and the
laptop's microphone input may well be incorrect.

Microphone mute functionality is not included:
The microphone mute button seems to be reported through thinkpad_acpi key
0000101b.  The mute button LED seems to be wired to thinkpad_acpi led
number 15.
Signed-off-by: NJens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The Biostar mobo seems to give a wrong DMA position, resulting in
stuttering or skipping sounds on 2.6.34.  Since the commit
7b3a177b, "ALSA: pcm_lib: fix "something
must be really wrong" condition", makes the position check more strictly,
the DMA position problem is revealed more clearly now.

The fix is to use only LPIB for obtaining the position, i.e. passing
position_fix=1.  This patch adds a static quirk to achieve it as default.
Reported-by: NFrank Griffin <ftg@roadrunner.com>
Cc: Eric Piel <Eric.Piel@tremplin-utc.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the matching model for Clevo laptop M570U.
Signed-off-by: NJoerg Schirottke <master@kanotix.com>
Tested-by: NMaximilian Gerhard <maxbox@directbox.com>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some VIA codecs have no multiple source selection for headphone pins,
thus it's useless (and wrong) to create "Independent HP" control on them.

This patch adds the check of connections to skip the control in such a
case.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The commit 5b0cb1d8
    ALSA: hda - add more NID->Control mapping
breaks the control element allocation by returning a wrong value.
Let's fix it.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Sony VAIO models with ALC269 need to initialize the pin 0x19 to VREF
ground or Hi-Z to make the headphone working.  Other than that, model=auto
works fine, so let's use model=auto with a specific fix-up table.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

A few enhancement / fixes for fix-up table of some Realtek codecs:
 - Apply fix-ups only for the auto model
 - Apply additional verbs after normal init verbs
 - Add a debug print to show the fix-up application

This is basically a preliminary work for the next fix for Sony VAIO.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The widget connections of ADC of ALC880 and ALC2260 aren't initialized,
thus it might point to invalid pin.  This can be a problem when mode=auto
and there is only one input pin.  Then user can't change the connection
at all.

This patch adds the code to initialize the input pin connection of these
codecs.

Reference: Novell bnc#594363
	https://bugzilla.novell.com/show_bug.cgi?id=594363Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Corrected HP and mic pins for ALC269vb amic and dmic models.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ALC269vb has an alternative HP pin 0x21 in addition.
Fix the parser to recognize it.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This adds support for the Medion WIM2160 soundcard.
There's no PCI quirk added because it has the same PCI id as the
Medion MD2.
Signed-off-by: NMaurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Assign DACs properly to each output.  Currently, the front output is bound
to HP/speaker outputs blindly, but they should be assigned to individual
DACs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The commit 6a4f2ccb introduced a wrong
comparision for the array range check, which effectively skips the whole
initialization of DAC connections.  Fixed now.

Reference: bko#15689
	https://bugzilla.kernel.org/show_bug.cgi?id=15689Reported-by: NAdrian Ulrich <kernel@blinkenlights.ch>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

After more tests it appears that EAPD needs to be enabled
on both the 0x14 and 0x15 NIDs to enable the main speaker
and headphone amplifiers. The maximum volume setting is
now equal to what the machine achieves under other operating
systems.
Disabling Front or LFE playback triggers EAPD and disables
the amplifier. As such, these two playback switches have
been removed from the mixer.
Signed-off-by: NTony Vroon <tony@linx.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The device needs MSI disablement.  Added to the quirk list.
Reported-by: NHarald Dunkel <harri@afaics.de>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>