Added core support for IIO_VAL_INT in write_raw_get_fmt function.
Signed-off-by: NSean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This commit add support for STMicroelectronics lis2dh12 accelerometer.
Datasheet for this device can be found here:

http://www.st.com/st-web-ui/static/active/en/resource/technical/
document/datasheet/DM00091513.pdf
Signed-off-by: NGiuseppe Barba <giuseppe.barba@st.com>
Acked-by: NDenis Ciocca <denis.ciocca@st.com>
Acked-by: NDaniel Baluta <daniel.baluta@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This patch fixes the following checkpatch warning:
WARNING: unchecked sscanf return value
Signed-off-by: NIoana Ciornei <ciorneiioana@gmail.com>
Acked-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This patch fixes the checkpatch warnings:
WARNING: unchecked sscanf return value
Signed-off-by: NIoana Ciornei <ciorneiioana@gmail.com>
Acked-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

At probe, runtime pm should be setup before registering the sysfs interface so
that all the power attributes are accurate and functional when registering.
Also, when removing the device we should unregister first to make sure
that the interfaces that may result in wakeups are no longer available.

Fix this behaviour for the following drivers: bmc150, bmg160, kmx61,
kxcj-1013, mma9551, mma9553, rpr0521.
Signed-off-by: NAdriana Reus <adriana.reus@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Make sure we poweroff the chip if for any reason iio_register
returns an error.
Signed-off-by: NAdriana Reus <adriana.reus@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Add support for Freescale MMA7455L/MMA7456L 3-axis in 10-bit mode for
I2C and SPI bus. This rather simple driver that currently doesn't
support all the hardware features of MMA7455L/MMA7456L.

Tested on Embedded Artist's LPC4357 Dev Kit with MMA7455L on I2C bus.

Data sheets for the two devices can be found here:
http://cache.freescale.com/files/sensors/doc/data_sheet/MMA7455L.pdf
http://cache.freescale.com/files/sensors/doc/data_sheet/MMA7456L.pdfSigned-off-by: NJoachim Eastwood <manabian@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Print an error message to indicate that invalid configuration data was
provided in the platform_data, rather than just aborting initialization.
Signed-off-by: NBjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Add a generic fully device independent DMA buffer implementation that uses
the DMAegnine framework to perform the DMA transfers. This can be used by
converter drivers that whish to provide a DMA buffer for converters that
are connected to a DMA core that implements the DMAengine API.

Apart from allocating the buffer using iio_dmaengine_buffer_alloc() and
freeing it using iio_dmaengine_buffer_free() no additional converter driver
specific code is required when using this DMA buffer implementation.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The traditional approach used in IIO to implement buffered capture requires
the generation of at least one interrupt per sample. In the interrupt
handler the driver reads the sample from the device and copies it to a
software buffer. This approach has a rather large per sample overhead
associated with it. And while it works fine for samplerates in the range of
up to 1000 samples per second it starts to consume a rather large share of
the available CPU processing time once we go beyond that, this is
especially true on an embedded system with limited processing power. The
regular interrupt also causes increased power consumption by not allowing
the hardware into deeper sleep states, which is something that becomes more
and more important on mobile battery powered devices.

And while the recently added watermark support mitigates some of the issues
by allowing the device to generate interrupts at a rate lower than the data
output rate, this still requires a storage buffer inside the device and
even if it exists it is only a few 100 samples deep at most.

DMA support on the other hand allows to capture multiple millions or even
more samples without any CPU interaction. This allows the CPU to either go
to sleep for longer periods or focus on other tasks which increases overall
system performance and power consumption. In addition to that some devices
might not even offer a way to read the data other than using DMA, which
makes DMA mandatory to use for them.

The tasks involved in implementing a DMA buffer can be divided into two
categories. The first category is memory buffer management (allocation,
mapping, etc.) and hooking this up the IIO buffer callbacks like read(),
enable(), disable(), etc. The second category of tasks is to setup the
DMA hardware and manage the DMA transfers. Tasks from the first category
will be very similar for all IIO drivers supporting DMA buffers, while the
tasks from the second category will be hardware specific.

This patch implements a generic infrastructure that take care of the former
tasks. It provides a set of functions that implement the standard IIO
buffer iio_buffer_access_funcs callbacks. These can either be used as is or
be overloaded and augmented with driver specific code where necessary.

For the DMA buffer support infrastructure that is introduced in this series
sample data is grouped by so called blocks. A block is the basic unit at
which data is exchanged between the application and the hardware. The
application is responsible for allocating the memory associated with the
block and then passes the block to the hardware. When the hardware has
captured the amount of samples equal to size of a block it will notify the
application, which can then read the data from the block and process it.
The block size can freely chosen (within the constraints of the hardware).
This allows to make a trade-off between latency and management overhead.
The larger the block size the lower the per sample overhead but the latency
between when the data was captured and when the application will be able to
access it increases, in a similar way smaller block sizes have a larger per
sample management overhead but a lower latency. The ideal block size thus
depends on system and application requirements.

For the time being the infrastructure only implements a simple double
buffered scheme which allocates two blocks each with half the size of the
configured buffer size. This provides basic support for capturing
continuous uninterrupted data over the existing file-IO ABI. Future
extensions to the DMA buffer infrastructure will give applications a more
fine grained control over how many blocks are allocated and the size of
each block. But this requires userspace ABI additions which are
intentionally not part of this patch and will be added separately.

Tasks of the second category need to be implemented by a device specific
driver. They can be hooked up into the generic infrastructure using two
simple callbacks, submit() and abort().

The submit() callback is used to schedule DMA transfers for blocks. Once a
DMA transfer has been completed it is expected that the buffer driver calls
iio_dma_buffer_block_done() to notify. The abort() callback is used for
stopping all pending and active DMA transfers when the buffer is disabled.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This patch adds a enable and disable callback that is called when the
buffer is enabled/disabled. This can be used by buffer implementations that
need to do some setup or teardown work. E.g. a DMA based buffer can use
this to start/stop the DMA transfer.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

For buffers which have a fixed wake-up watermark the watermark attribute
should be read-only. Add a new FIXED_WATERMARK flag to the
struct iio_buffer_access_funcs, which can be set by a buffer
implementation.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Only initialize the watermark field if it is still 0. This allows drivers
to provide a custom default watermark value. E.g. some driver might have a
fixed watermark or can only support watermarks within a certain range and
the initial value for the watermark should be within this range.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Currently the watermark of the device is only set based on the watermark
that is set for the user space buffer. This doesn't consider the watermarks
set on any attached in-kernel buffers.

Change this so that the watermark of the device should be the minimum of
the watermarks over all attached buffers.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The driver Device Tree binding now documents compatible strings that have
a vendor prefix, so add these to the OF device ID table to match and mark
the old ones as deprecated explaining that should not be used anymore.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Acked-by: NMichael Welling <mwelling@ieee.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The Microchip Analog to Digital Converter (ADC) Device Tree binding
documents compatible strings with no vendor prefix. Since it should
compatible strings with also a vendor, add these to the binding doc
and mark the old ones as deprecated.

The driver says that the device is from Microchip Technology which
is listed in Documentation/devicetree/bindings/vendor-prefixes.txt
so use the documented prefix.
Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Acked-by: NMichael Welling <mwelling@ieee.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This patch moves the reference IIO dummy driver from drivers/staging/iio
into a separate folder, drivers/iio/dummy and adds the proper Kconfig
and Makefile for it.

A new config menu entry called IIO dummy driver has also been added
in the Industrial I/O support menu, corresponding to this driver.
Signed-off-by: NCristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Code was found at:
https://android.googlesource.com/kernel/tegra/+/a90856a6626d502d42c6e7abccbdf9d730b36270%5E%21/#F1Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Marek Belisko <marek@goldelico.com> [Fixed minor typos + add channels list to documentation]
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This driver code was found as:

https://android.googlesource.com/kernel/tegra/+/aaabb2e045f31e5a970109ffdaae900dd403d17e/drivers/staging/iio/adc

Fixed various compilation issues and test this driver on omap5 evm.
Signed-off-by: NPradeep Goudagunta <pgoudagunta@nvidia.com>
Signed-off-by: NH. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: NMarek Belisko <marek@goldelico.com>
Acked-by: NLaxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: NJonathan Cameron <jic23@kernel.org>
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This patch adds a minimal implementation for the Memsic MXC6255XC
orientation sensing accelerometer. The supported operations are reading
raw acceleration values for X/Y axis that can be scaled using the
exposed scale.
Signed-off-by: NTeodora Baluta <teodora.baluta@intel.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This change is important in order for everyone to be easily able to use the
driver for one of the supported accelerometer chips!

Until now, the driver blindly assumed that the INT1 interrupt line is wired
on a user's board. But these devices have 2 interrupt lines and can route
their interrupt sources to one of them. Now, if "INT2" is found and matches
i2c_client->irq, INT2 will be used.

The chip's default actually is INT2, which is why probably many boards will
have it wired and can make use of this.

Of course, this also falls back to assuming INT1, so for existing users
nothing will break. The new functionality is described in the bindings doc.
Signed-off-by: NMartin Kepplinger <martin.kepplinger@theobroma-systems.com>
For the binding: Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Use comm[TASK_COMM_LEN] instead of comm[16].
Signed-off-by: NGeliang Tang <geliangtang@163.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

_enter_critical_mutex() is a simple call to mutex_lock_interruptible(),
but there is no error handling code for it.

The patch removes wrapper _enter_critical_mutex() and
adds error handling for mutex_lock_interruptible().

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

cvm_oct_xaui_open() is trivial and does not need a dedicated file.
Move it to the main file.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Drop redundant poll_now parameter from cvm_oct_common_open.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Get the initial link status already on open instead of postponing
it to the periodic poll task. This unifies the behaviour with
other interfaces types.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When the same portal is used to call mc_send_command() from two
different threads or a thread and an interrupt handler, serialization
is required, as the MC only supports one outstanding command per MC
portal. Thus, a new command should not be sent to the MC until the
last command sent has been responded by the MC.
Signed-off-by: NJ. German Rivera <German.Rivera@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Refactored mc_send_command() to support two flavors of polling:
- preemptible (for non-atomic portals), which was already supported.
  It calls usleep_range() between polling iterations.
- non-preemptible (for atomic portals), which is needed when
  mc_send_command() is called with interrupts disabled.
  It calls udelay() between polling iterations.
Signed-off-by: NJ. German Rivera <German.Rivera@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Moved wait logic in mc_send_command() to its own function
Signed-off-by: NJ. German Rivera <German.Rivera@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Changed units for the timeout to wait for completion
of MC command, from jiffies to milliseconds.
Signed-off-by: NJ. German Rivera <German.Rivera@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

owner needs to be initialized as THIS_MOUDLE.
Signed-off-by: NJ. German Rivera <German.Rivera@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When initializing the object attributes for the root dprc, the
irq_count was uninitialized. Initialize it to 1.
Signed-off-by: NJ. German Rivera <German.Rivera@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Check that resource is not NULL before de-referencing it.
Signed-off-by: NJ. German Rivera <German.Rivera@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Replaced error gotos with direct returns in fsl_mc_allocator_probe()
and fsl_mc_allocator_remove(), since the only error handling done
in those functions is to exit.
Signed-off-by: NJ. German Rivera <German.Rivera@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Call fsl_mc_resource_pool_remove_device() only if mc_dev->resource
is not NULL.
Signed-off-by: NJ. German Rivera <German.Rivera@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Whitespace cleanup-- add missing spaces in column 1 of copyright
Signed-off-by: NJ. German Rivera <German.Rivera@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The macros were a left-over from a previous implementation
of the dpmcp APIs and are no longer used.
Signed-off-by: NJ. German Rivera <German.Rivera@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Changed these two fields from 32-bit integers to 16-bit integers in
struct fsl_mc_io, as 32 bits is too much for these fields. This
change does not affect other components since fsl_mc_io is an opaque
type.
Signed-off-by: NJ. German Rivera <German.Rivera@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Changed dev_info() calls to dev_dbg() in
fsl_mc_allocator_probe/fsl_mc_allocator_remove, as they
are useful only for debugging.
Signed-off-by: NJ. German Rivera <German.Rivera@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Before, we were opening and closing a mc_io's dpmcp object
in fsl_mc_portal_reset(), since that was the only function that was
calling dpmcp MC operations. However, it is better for maintainability
to open the dpmcp object when it gets associated with an mc_io object,
and close it when this association is terminated. This way, we are free
to call dpmcp operations on a mc_io's dpmcp object at any time, without
having to check if the dpmcp object is opened or not.

Consequently, the creation/teardown of the association between
an mc_io object and a dpmcp is now encapsulated in two functions:
fsl_mc_io_set_dpmcp()/fsl_mc_io_unset_dpmcp(). Besides, setting
the corresponding pointers for the association, these functions
open and close the dpmcp object respectively.
Signed-off-by: NJ. German Rivera <German.Rivera@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>