Now that CRTC's have a primary plane, there's no need to track the
framebuffer in the CRTC.  Replace all references to the CRTC fb with the
primary plane's fb.

This patch was generated by the Coccinelle semantic patching tool using
the following rules:

        @@ struct drm_crtc C; @@
        -   (C).fb
        +   C.primary->fb

        @@ struct drm_crtc *C; @@
        -   (C)->fb
        +   C->primary->fb

v3: Generate patch via coccinelle.  Actual removal of crtc->fb has been
    moved to a subsequent patch.

v2: Fixup several lingering crtc->fb instances that were missed in the
    first patch iteration.  [Rob Clark]
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>

Use drm_universal_plane_init() and drm_crtc_init_with_planes() rather
than the legacy drm_plane_init() / drm_crtc_init().  This will ensure
that the proper primary plane is registered with the DRM (and eventually
exposed to userspace in future patches).

Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Add a new drm_crtc_init_with_planes() to allow drivers to provide
specific primary and cursor planes at CRTC initialization.  The existing
drm_crtc_init() interface remains to avoid driver churn in existing
drivers; it will initialize the CRTC with a plane helper-created primary
plane and no cursor plane.

v2:
  - Move drm_crtc_init() to plane helper file so that nothing in the DRM
    core depends on helpers.  [suggested by Daniel Vetter]
  - Keep cursor parameter to drm_crtc_init_with_planes() a void* until
    we actually add cursor support.  [suggested by Daniel Vetter]
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>

Add a plane type property to allow userspace to distinguish plane types.

v2: Driver-specific churn eliminated now that drm_plane_init() and
    drm_universal_plane_init() were separated out in a previous patch.
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>

Add a new plane initialization interface for universal plane support
that allows a specific plane type (primary, cursor, or overlay) to
be specified.

drm_plane_init() remains as a compatibility API to reduce churn in
existing drivers.  The 'bool priv' parameter has been changed to
'bool is_primary' under the assumption that all existing uses of
private planes were representing primary planes.
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>

When we expose non-overlay planes to userspace, they will become
accessible via standard userspace plane API's.  We should be able to
handle the standard plane operations against primary planes in a generic
way via the modeset handler.

Drivers that can program primary planes more efficiently, that want to
use their own primary plane structure to track additional information,
or that don't have the limitations assumed by the helpers are free to
provide their own implementation of some or all of these handlers.

v3: Tweak kerneldoc formatting slightly to avoid ugliness
v2:
 - Move plane helpers to a new file (drm_plane_helper.c)
 - Tighten checks on update handler (check for scaling, CRTC coverage,
   subpixel positioning)
 - Pass proper panning parameters to modeset interface
 - Disallow disabling primary plane (and thus CRTC) if other planes are
   still active on the CRTC.
 - Use a minimal format list that should work on all hardware/drivers.
   Drivers may call this function with a more accurate plane list to
   enable additional formats they can support.
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>

This function will be used by the universal plane helpers and may also
be useful for individual drivers.
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>

Ensure that existing driver loops over all planes do not change behavior
when we begin adding new types of planes (primary and cursor) to the DRM
plane list in future patches.
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>

Ensure that existing driver loops over all planes do not change behavior
when we begin adding new types of planes (primary and cursor) to the DRM
plane list in future patches.

v2: Switch to using drm_for_each_legacy_plane()

Cc: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>

Ensure that existing driver loops over all planes do not change behavior
when we begin adding new types of planes (primary and cursor) to the DRM
plane list in future patches.

v2: Switch to using drm_for_each_legacy_plane()

Cc: Inki Dae <inki.dae@samsung.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>

The DRM core currently only tracks "overlay"-style planes.  Start
refactoring the plane handling to allow other plane types (primary and
cursor) to also be placed on the DRM plane list.

v2: Add drm_for_each_legacy_plane() iterator to smooth transition
    of drivers with plane loops.
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>

vmwgfx render-node support and drm + ttm changes it depends upon.

Pull request of 2014-03-28

* tag 'vmwgfx-next-2014-03-28' of git://people.freedesktop.org/~thomash/linux:
  drm/vmwgfx: Bump driver minor and date
  drm/vmwgfx: Enable render nodes
  drm/vmwgfx: Tighten the security around buffer maps
  drm/ttm: Add a ttm_ref_object_exists function
  drm/vmwgfx: Tighten security around surface sharing v2
  drm/vmwgfx: Allow prime fds in the surface reference ioctls
  drm/vmwgfx: Drop authentication requirement on UNREF ioctls
  drm/vmwgfx: Reinstate and tighten security around legacy master model
  drm/vmwgfx: Use a per-device semaphore for reservation protection
  drm: Add a function to get the ioctl flags
  drm: Protect the master management with a drm_device::master_mutex v3
  drm: Remove the minor master list
  drm: Improve on minor type helpers v3
  drm: Make control nodes master-less v3
  drm: Break out ioctl permission check to a separate function v2
  drm: Have the crtc code only reference master from legacy nodes v2

Signal availability of prime fd reference ioctls and render nodes.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NBrian Paul <brianp@vmware.com>

Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NBrian Paul <brianp@vmware.com>

Make sure only buffer objects that are referenced by the client can be mapped.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NBrian Paul <brianp@vmware.com>

A function to be used to check whether a caller has put a ref object
(opened) a struct ttm_base_object
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NBrian Paul <brianp@vmware.com>

If using legacy (non-prime) surface sharing, only allow surfaces
to be shared between clients with the same master. This will block
malicious clients from peeking at contents at surfaces from other
(possibly vt-switched) masters.

v2:
s/legacy_client/primary_client/
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NBrian Paul <brianp@vmware.com>

Allow prime fds and at the same time block legacy handles for render-nodes
in the surface reference ioctls. This means these ioctls can be used
directly from prime-aware clients, and that they can be called from
render-nodes.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NBrian Paul <brianp@vmware.com>

These ioctls will anyway only succeed if the client previously opened
referenced the object. Furthermore, closing the client would implicitly
execute the same action. This prevents clients from blocking on UNREF if
their master dropped, and will allow masters to UNREF after dropping
master privileges.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NBrian Paul <brianp@vmware.com>

The following restrictions affect clients connecting using legacy nodes:

*) Masters that have dropped master privilieges are not considered
   authenticated until they regain master privileges.
*) Clients whose master have dropped master privileges block interruptibly on
   ioctls  requiring authentication until their master regains master
   privileges. If their master exits, they are killed.

This is primarily designed to prevent clients authenticated with one master to
access data from clients authenticated with another master.
(Think fast user-switching or data sniffers enabled while X is vt-switched).
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NBrian Paul <brianp@vmware.com>

Don't use a per-master semaphore (ttm lock) for reservation protection, but
rather a per-device semaphore. This is needed since clients connecting using
render nodes aren't master aware.

The ttm lock used should probably be replaced with a reader-write semaphore
once the function down_xx_interruptible() is available.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NBrian Paul <brianp@vmware.com>

Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NBrian Paul <brianp@vmware.com>

The master management was previously protected by the drm_device::struct_mutex.
In order to avoid locking order violations in a reworked dropped master
security check in the vmwgfx driver, break it out into a separate master_mutex.
Locking order is master_mutex -> struct_mutex.

Also remove drm_master::blocked since it's not used.

v2: Add an inline comment about what drm_device::master_mutex is protecting.
v3: Remove unneeded struct_mutex locks. Fix error returns in
    drm_setmaster_ioctl().
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NBrian Paul <brianp@vmware.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Acked-by: NDaniel Vetter <daniel@ffwll.ch>

It doesn't appear to be used anywhere.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>

Add a drm_is_legacy() helper, constify argument to drm_is_render_client(),
and use / change helpers where appropriate.

v2: s/drm_is_legacy/drm_is_legacy_client/ and adapt to new code context.
v3: s/legacy_client/primary_client/
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NBrian Paul <brianp@vmware.com>

Like for render-nodes, there is no point in maintaining the master concept
for control nodes, so set the struct drm_file::master pointer to NULL.

At the same time, make sure DRM_MASTER | DRM_CONTROL_ALLOW ioctls are always
allowed when called through the control node. Previously the caller also
needed to be master.

v2: Adapt to refactoring of ioctl permission check.
v3: Formatting of logical expression. Use drm_is_control_client() instead of
    drm_is_control().
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NBrian Paul <brianp@vmware.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>

Helps reviewing and understanding these checks.
v2: Remove misplaced newlines.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>

control- and render nodes are intended to be master-less.

v2: Replace tests for !legacy with tests for !mode_group for readability.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>

/ssd/git/drm-next/drivers/gpu/drm/i915/i915_cmd_parser.c: In function ‘i915_parse_cmds’:
/ssd/git/drm-next/drivers/gpu/drm/i915/i915_cmd_parser.c:405:4: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 5 has type ‘int’ [-Wformat=]
    DRM_DEBUG_DRIVER("CMD: Command length exceeds batch length: 0x%08X length=%d batchlen=%ld\n",
    ^
Signed-off-by: NDave Airlie <airlied@redhat.com>

Right now a debug message looks like:

  [drm:drm_ioctl], pid=860, dev=0xe200, auth=1, DRM_IOCTL_MODE_GETCRTC

That first comma looks weird as we already have ']' as a separator.
Remove it.

If anyone sees this commit message and also thinks that auth=1 isn't the
most useful info to have here, let's just say I'd happily review a patch
removing it. If I don't get annoyed enough to submit a patch, that is.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This is always DRM_NAME, so we can just make it part of the format
string instead of asking prink to do it for us.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The DRM_LOG* macros where the only sites where drm_ut_debug_printk was
called with NULL arguments for prefix and function_name. Now that they
are gone, we can remove that case.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

In the logging code, we are currently checking is we need to output in
drm_ut_debug_printk(). This is too late. The problem is that when we write
something like:

    DRM_DEBUG_DRIVER("ELD on [CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
                     connector->base.id,
                     drm_get_connector_name(connector),
                     connector->encoder->base.id,
                     drm_get_encoder_name(connector->encoder));

We start by evaluating the arguments (so call drm_get_connector_name() and
drm_get_connector_name()) before ending up in drm_ut_debug_printk() which will
then does nothing.

This means we execute a lot of instructions (drm_get_connector_name(), in turn,
calls snprintf() for example) to happily discard them in the normal case,
drm.debug=0.

So, let's put the test on drm_debug earlier, in the macros themselves.
Sprinkle an unlikely() as well for good measure.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

There are only a few users of the DRM_LOG_KMS() macro. We can simplify
the DRM code a bit by replacing them by DRM_DEBUG_KMS().

Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

There are only a few users of the DRM_LOG_KMS() macro. We can simplify
the DRM code a bit by replacing them by DRM_DEBUG_KMS().
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

There are only a few users of the DRM_LOG_KMS() macro. We can simplify
the DRM code a bit by replacing them by DRM_DEBUG_KMS().

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Acked-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

There are only a few users of the DRM_LOG_KMS() macro. We can simplify
the DRM code a bit by replacing them by DRM_DEBUG_KMS().

Cc: Inki Dae <inki.dae@samsung.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This macro was trying to use the non existing DRM_UT_MODE debug category
and looks like it should be covered by DRM_LOG_KMS().
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

That comment wasn't super-readable, so I tried to improve it:

- Put the comment before the values it's documenting
- Add a mention to PRIME
- Reword things a bit to be a lighter read
- Add a note about the option to set the debug value at run-time
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>