This patch (as1024) takes care of a FIXME issue: Drivers that don't
have the necessary suspend, resume, reset_resume, pre_reset, or
post_reset methods will be unbound and their interface reprobed when
one of the unsupported events occurs.

This is made slightly more difficult by the fact that bind operations
won't work during a system sleep transition.  So instead the code has
to defer the operation until the transition ends.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch renames the existing usb_reset_device in hub.c to
usb_reset_and_verify_device and renames the existing
usb_reset_composite_device to usb_reset_device. Also the new
usb_reset_and_verify_device does't need to be EXPORTED .

The idea of the patch is that external interface driver
should warn the other interfaces' driver of the same
device before and after reseting the usb device. One interface
driver shoud call _old_ usb_reset_composite_device instead of
_old_ usb_reset_device since it can't assume the device contains
only one interface. The _old_ usb_reset_composite_device
is safe for single interface device also. we rename the two
functions to make the change easily.

This patch is under guideline from Alan Stern.
Signed-off-by: NMing Lei <tom.leiming@gmail.com>

From the current implementation of usb_reset_composite_device
function, the iface parameter is no longer useful. This function
doesn't do something special for the iface usb_interface,compared
with other interfaces in the usb_device. So remove the parameter
and fix the related caller.
Signed-off-by: NMing Lei <tom.leiming@gmail.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1102) clarifies two points in the USB Gadget kerneldoc:

	Request completion callbacks are always made with interrupts
	disabled;

	Device controllers may not support STALLing the status stage
	of a control transfer after the data stage is over.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

General cleanup on ir-usb module. Introduced
a common header that could be used also on
usb gadget framework.

Lot's of cleanups and now using macros from the header
file.
Signed-off-by: NFelipe Balbi <me@felipebalbi.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add <linux/usb/composite.h> interfaces for composite gadget drivers, and
basic implementation support behind it:

  - struct usb_function ... groups one or more interfaces into a function
    managed as one unit within a configuration, to which it's added by
    usb_add_function().

  - struct usb_configuration ... groups one or more such functions into
    a configuration managed as one unit by a driver, to which it's added
    by usb_add_config().  These operate at either high or full/low speeds
    and at a given bMaxPower.

  - struct usb_composite_driver ... groups one or more such configurations
    into a gadget driver, which may be registered or unregistered.

  - struct usb_composite_dev ... a usb_composite_driver manages this; it
    wraps the usb_gadget exposed by the controller driver.

This also includes some basic kerneldoc.

How to use it (the short version):  provide a usb_composite_driver with a
bind() that calls usb_add_config() for each of the needed configurations.
The configurations in turn have bind() calls, which will usb_add_function()
for each function required.  Each function's bind() allocates resources
needed to perform its tasks, like endpoints; sometimes configurations will
allocate resources too.

Separate patches will convert most gadget drivers to this infrastructure.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Define three new descriptor manipulation utilities, for use when
setting up functions that may have multiple instances:

	usb_copy_descriptors() to copy a vector of descriptors
	usb_free_descriptors() to free the copy
	usb_find_endpoint() to find a copied version

These will be used as follows.  Functions will continue to have static
tables of descriptors they update, now used as __initdata templates.

When a function creates a new instance, it patches those tables with
relevant interface and string IDs, plus endpoint assignments.  Then it
copies those morphed descriptors, associates the copies with the new
function instance, and records the endpoint descriptors to use when
activating the endpoints.  When initialization is done, only the copies
remain in memory.  The copies are freed on driver removal.

This ensures that each instance has descriptors which hold the right
instance-specific data.  Two instances in the same configuration will
obviously never share the same interface IDs or use the same endpoints.
Instances in different configurations won't do so either, which means
this is slightly less memory-efficient in some cases.

This also includes a bugfix to the epautoconf code that shows up with
this usage model.  It must replace the previous endpoint number when
updating the template descriptors, not just mask in a few more bits.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch removes CVS keywords that weren't updated for a long time
from comments.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1091) changes the way usbcore handles interface
unbinding.  If the interface's driver supports "soft" unbinding (a new
flag in the driver structure) then in-flight URBs are not cancelled
and endpoints are not disabled.  Instead the driver is allowed to
continue communicating with the device (although of course it should
stop before its disconnect routine returns).

The purpose of this change is to allow drivers to do a clean shutdown
when they get unbound from a device that is still plugged in.  Killing
all the URBs and disabling the endpoints before calling the driver's
disconnect method doesn't give the driver any control over what
happens, and it can leave devices in indeterminate states.  For
example, when usb-storage unbinds it doesn't want to stop while in the
middle of transmitting a SCSI command.

The soft_unbind flag is added because in the past, a number of drivers
have experienced problems related to ongoing I/O after their disconnect
routine returned.  Hence "soft" unbinding is made available only to
drivers that claim to support it.

The patch also replaces "interface_to_usbdev(intf)" with "udev" in a
couple of places, a minor simplification.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This changes usb_create_hcd() to be able to handle the fact that
pci_name() has changed to a constant string.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

There are a couple of places where (P)Dprintk is used which is an old
compile time enabled printk wrapper. Convert it to the generic
pr_debug().
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch adds some fields to NFLOG to be able to send the complete
hardware header with all necessary informations.
It sends to userspace:
 * the type of hardware link
 * the lenght of hardware header
 * the hardware header
Signed-off-by: NEric Leblond <eric@inl.fr>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Initially netfilter has had 64bit counters for conntrack-based accounting, but
it was changed in 2.6.14 to save memory. Unfortunately in-kernel 64bit counters are
still required, for example for "connbytes" extension. However, 64bit counters
waste a lot of memory and it was not possible to enable/disable it runtime.

This patch:
 - reimplements accounting with respect to the extension infrastructure,
 - makes one global version of seq_print_acct() instead of two seq_print_counters(),
 - makes it possible to enable it at boot time (for CONFIG_SYSCTL/CONFIG_SYSFS=n),
 - makes it possible to enable/disable it at runtime by sysctl or sysfs,
 - extends counters from 32bit to 64bit,
 - renames ip_conntrack_counter -> nf_conn_counter,
 - enables accounting code unconditionally (no longer depends on CONFIG_NF_CT_ACCT),
 - set initial accounting enable state based on CONFIG_NF_CT_ACCT
 - removes buggy IPCT_COUNTER_FILLING event handling.

If accounting is enabled newly created connections get additional acct extend.
Old connections are not changed as it is not possible to add a ct_extend area
to confirmed conntrack. Accounting is performed for all connections with
acct extend regardless of a current state of "net.netfilter.nf_conntrack_acct".
Signed-off-by: NKrzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add NLA_PUT_BE64 macro required for 64bit counters in netfilter
Signed-off-by: NKrzysztof Piotr Oledzki <ole@ans.pl>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce a bvec merge function for device mapper devices
for dynamic size restrictions.

This code ensures the requested biovec lies within a single
target and then calls a target-specific function to check
against any constraints imposed by underlying devices.
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

-tip testing found this build bug:

 arch/x86/kvm/built-in.o:(.text.fixup+0x1): relocation truncated to fit: R_X86_64_32 against `.text'
 arch/x86/kvm/built-in.o:(.text.fixup+0xb): relocation truncated to fit: R_X86_64_32 against `.text'
 arch/x86/kvm/built-in.o:(.text.fixup+0x15): relocation truncated to fit: R_X86_64_32 against `.text'
 arch/x86/kvm/built-in.o:(.text.fixup+0x1f): relocation truncated to fit: R_X86_64_32 against `.text'
 arch/x86/kvm/built-in.o:(.text.fixup+0x29): relocation truncated to fit: R_X86_64_32 against `.text'

Introduced by commit 4ecac3fd. The problem is that 'push' will default
to 32-bit, which is not wide enough as a fixup address. (and which would
crash on any real fixup event even if it was wide enough)

Introduce KVM_EX_PUSH to get the proper address push width on 64-bit too.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

All modifications and most access to the mddev->disks list are made
under the reconfig_mutex lock.  However there are three places where
the list is walked without any locking.  If a reconfig happens at this
time, havoc (and oops) can ensue.

So use RCU to protect these accesses:
  - wrap them in rcu_read_{,un}lock()
  - use list_for_each_entry_rcu
  - add to the list with list_add_rcu
  - delete from the list with list_del_rcu
  - delay the 'free' with call_rcu rather than schedule_work

Note that export_rdev did a list_del_init on this list.  In almost all
cases the entry was not in the list anymore so it was a no-op and so
safe.  It is no longer safe as after list_del_rcu we may not touch
the list_head.
An audit shows that export_rdev is called:
  - after unbind_rdev_from_array, in which case the delete has
     already been done,
  - after bind_rdev_to_array fails, in which case the delete isn't needed.
  - before the device has been put on a list at all (e.g. in
      add_new_disk where reading the superblock fails).
  - and in autorun devices after a failure when the device is on a
      different list.

So remove the list_del_init call from export_rdev, and add it back
immediately before the called to export_rdev for that last case.

Note also that ->same_set is sometimes used for lists other than
mddev->list (e.g. candidates).  In these cases rcu is not needed.
Signed-off-by: NNeilBrown <neilb@suse.de>

Open isn't the only thing that increments ->active.  e.g. reading
/proc/mdstat will increment it briefly.  So to avoid false positives
in testing for concurrent access, introduce a new counter that counts
just the number of times the md device it open.
Signed-off-by: NNeilBrown <neilb@suse.de>

Signed-off-by: NAndre Noll <maan@systemlinux.org>
Signed-off-by: NNeilBrown <neilb@suse.de>

This patch renames the array_size field of struct mddev_s to array_sectors
and converts all instances to use units of 512 byte sectors instead of 1k
blocks.
Signed-off-by: NAndre Noll <maan@systemlinux.org>
Signed-off-by: NNeilBrown <neilb@suse.de>

The stab bits can't be referenced uniless the full
packet scheduler layer is enabled.

Reported by Stephen Rothwell.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

m68k: remove stale ARCH_SUN4 #define
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch contains the following possible cleanups:
- make the following needlessly global code static:
  - config.c: sun3_bootmem_alloc()
  - config.c: sun3_sched_init()
  - dvma.c: dvma_page()
  - idprom.c: struct Sun_Machines[]
  - mmu_emu.c: struct ctx_alloc[]
  - sun3dvma.c: iommu_use[]
  - sun3ints.c: led_pattern[]
- remove the unused sbus.c
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch contains the following possible cleanups:
- make the following needlessly global code (always) static:
  - baboon.c: struct baboon
  - baboon.c: baboon_irq()
  - config.c: mac_orig_videoaddr
  - config.c: mac_identify()
  - config.c: mac_report_hardware()
  - config.c: mac_debug_console_write()
  - config.c: mac_sccb_console_write()
  - config.c: mac_scca_console_write()
  - config.c: mac_init_scc_port()
  - oss.c: oss_irq()
  - oss.c: oss_nubus_irq()
  - psc.c: psc_debug_dump()
  - psc.c: psc_dma_die_die_die()
  - via.c: rbv_clear
- remove the unused bootparse.c
- #if 0 the following unused functions:
  - config.c: mac_debugging_short()
  - config.c: mac_debugging_long()
- remove the following unused code:
  - config.c: mac_bisize
  - config.c: mac_env
  - config.c: mac_SCC_init_done
  - config.c: mac_SCC_reset_done
  - config.c: mac_init_scca_port()
  - config.c: mac_init_sccb_port()
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch contains the following possible cleanups:
- amiints.c: add a proper prototype for amiga_init_IRQ() in
             include/asm-m68k/amigaints.h
- make the following needlessly global code static:
  - config.c: amiga_model
  - config.c: amiga_psfreq
  - config.c: amiga_serial_console_write()
- #if 0 the following unused functions:
  - config.c: amiga_serial_puts()
  - config.c: amiga_serial_console_wait_key()
  - config.c: amiga_serial_gets()
- remove the following unused variable:
  - config.c: amiga_masterclock
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Unless I miss something that's code for a sparc machine even the sparc
code no longer supports that got copied to m68k when these files were
copied.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Allow no CPU/platform type for allnoconfig
  - Provide a dummy value for FPSTATESIZE if no CPU type was selected
  - Provide a dummy value for NR_IRQS if no platform type was selected
  - Warn the user if no CPU or platform type was selected

Note: you still cannot build an allnoconfig kernel, as CONFIG_SWAP=n doesn't
build and we cannot easily fix that
(http://groups.google.com/group/linux.kernel/browse_thread/thread/d430c78b07e1827b)
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch removes CVS keywords that weren't updated for a long time
from comments.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move more bits into the tty_port structure
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix up the termios of the people who have not yet got with the program
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Switch cyclades to use the new tty_port structure
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Switch the stallion driver to use the tty_port structure
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Switch istallion to use the new tty_port structure
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Switch drivers using the old "generic serial" driver to use the tty_port
structures
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Switch esp to use the new tty_port structures
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Coding style clean up and white space tidy
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Switch the serial_core based drivers to use the new tty_port structure.
We can't quite use all of it yet because of the dynamically allocated
extras in the serial_core layer.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Every tty driver has its own concept of a port structure and because
they all differ we cannot extract commonality.  Begin fixing this by
creating a structure drivers can elect to use so that over time we can
push fields into this and create commonality and then introduce common
methods.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move the line disciplines towards a conventional ->ops arrangement.  For
the moment the actual 'tty_ldisc' struct in the tty is kept as part of
the tty struct but this can then be changed if it turns out that when it
all settles down we want to refcount ldiscs separately to the tty.

Pull the ldisc code out of /proc and put it with our ldisc code.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Serial drivers using DMA (like the atmel_serial driver) tend to get very
confused when the xmit buffer is flushed and nobody told them.  They
also tend to spew a lot of garbage since the DMA engine keeps running
after the buffer is flushed and possibly refilled with unrelated data.

This patch adds a new flush_buffer operation to the uart_ops struct,
along with a call to it from uart_flush_buffer() right after the xmit
buffer has been cleared. The driver can implement this in order to
syncronize its internal DMA state with the xmit buffer when the buffer
is flushed.
Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>