- 18 9月, 2014 1 次提交
-
-
由 Masami Hiramatsu 提交于
Do not use dwfl_module_addrsym if dwarf_diename can find the symbol name, since dwfl_module_addrsym can be failed on shared libraries. Without this patch ---- $ perf probe -x ../lib/traceevent/libtraceevent.so -V create_arg_op Failed to find symbol at 0x11df1 Failed to find the address of create_arg_op Error: Failed to show vars. ---- With this patch ---- $ perf probe -x ../lib/traceevent/libtraceevent.so -V create_arg_op Available variables at create_arg_op @<create_arg_op+0> enum filter_op_type btype struct filter_arg* arg ---- This bug was reported on linux-perf-users@vger.kernel.org. Reported-by: Ndavid lerner <dlernerdroid@gmail.com> Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: david lerner <dlernerdroid@gmail.com> Cc: linux-perf-user@vger.kernel.org Cc: yrl.pp-manager.tt@hitachi.com Link: http://permalink.gmane.org/gmane.linux.kernel.perf.user/1691 Link: http://lkml.kernel.org/r/20140917084101.3722.25299.stgit@kbuild-f20.novalocalSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 15 8月, 2014 1 次提交
-
-
由 Masami Hiramatsu 提交于
To make error messages thread-safe, this replaces strerror with strerror_r for warnings, and just shows the return value instead of using strerror for debug messages. Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naohiro Aota <naota@elisp.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20140814022234.3545.22199.stgit@kbuild-fedora.novalocalSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 17 7月, 2014 1 次提交
-
-
由 Jiri Olsa 提交于
We don't use getopt.h interfaces. Signed-off-by: NJiri Olsa <jolsa@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1405374411-29012-6-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 10 6月, 2014 1 次提交
-
-
由 Masami Hiramatsu 提交于
Fix an error message when failed to find given address in --vars mode. Without this fix, perf probe -V doesn't show the final "Error" message if it fails to find given source line. Moreover, it tells it fails to find "variables" instead of the source line. ----- # perf probe -V foo@bar Failed to find variables at foo@bar (0) ----- The result also shows mysterious error code. Actually the error returns 0 or -ENOENT means that it just fails to find the address of given source line. (0 means there is no matching address, and -ENOENT means there is an entry(DIE) but it has no instance, e.g. an empty inlined function) This fixes it to show what happened and the final error message as below. ----- # perf probe -V foo@bar Failed to find the address of foo@bar Error: Failed to show vars. ----- Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20140606071359.6788.84716.stgit@kbuild-fedora.novalocalSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 09 6月, 2014 1 次提交
-
-
由 Masami Hiramatsu 提交于
Improve the error message if we can not find given member in the given structure. Currently perf probe shows a wrong error message as below. ----- # perf probe getname_flags:65 "result->BOGUS" result(type:filename) has no member BOGUS. Failed to find 'result' in this function. Error: Failed to add events. (-22) ----- The first message is correct, but the second one is not, since we didn't fail to find a variable but fails to find the member of given variable. ----- # perf probe getname_flags:65 "result->BOGUS" result(type:filename) has no member BOGUS. Error: Failed to add events. (-22) ----- With this patch, the error message shows only the first one. And if we really failed to find given variable, it tells us so. ----- # perf probe getname_flags:65 "BOGUS" Failed to find 'BOGUS' in this function. Error: Failed to add events. (-2) ----- Reported-by: NArnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20140606071345.6788.23744.stgit@kbuild-fedora.novalocalSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 04 6月, 2014 1 次提交
-
-
由 Masami Hiramatsu 提交于
Fix a segfault bug by asking for variable it doesn't find. Since the convert_variable() didn't handle error code returned from convert_variable_location(), it just passed an incomplete variable field and then a segfault was occurred when formatting the field. This fixes that bug by handling success code correctly in convert_variable(). Other callers of convert_variable_location() are correctly checking the return code. This bug was introduced by following commit. But another hidden erroneous error handling has been there previously (-ENOMEM case). commit 3d918a12Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reported-by: NArnaldo Carvalho de Melo <acme@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20140529105232.28251.30447.stgit@ltc230.yrl.intra.hitachi.co.jpSigned-off-by: NJiri Olsa <jolsa@kernel.org>
-
- 14 4月, 2014 3 次提交
-
-
由 Namhyung Kim 提交于
The dwarf_getcfi() only checks .debug_frame section for CFI, but as most binaries only have .eh_frame it'd return NULL and it makes some variables inaccessible. Using dwarf_getcfi_elf (along with dwarf_getelf()) allows to show and add probe to more variables. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/1396854348-9296-1-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@redhat.com>
-
由 Masami Hiramatsu 提交于
As Namhyung reported(https://lkml.org/lkml/2014/4/1/89), current perf-probe -L option doesn't handle errors in line-range searching correctly. It causes a SEGV if an error occured in the line-range searching. ---- $ perf probe -x ./perf -v -L map__load Open Debuginfo file: /home/namhyung/project/linux/tools/perf/perf fname: util/map.c, lineno:153 New line range: 153 to 2147483647 path: (null) Segmentation fault (core dumped) ---- This is because line_range_inline_cb() ignores errors from find_line_range_by_line() which means that lr->path is already freed on the error path in find_line_range_by_line(). As a result, get_real_path() accesses the lr->path and it causes a NULL pointer exception. This fixes line_range_inline_cb() to handle the error correctly, and report it to the caller. Anyway, this just fixes a possible SEGV bug, Namhyung's patch is also required. Reported-by: NNamhyung Kim <namhyung@kernel.org> Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: NNamhyung Kim <namhyung@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20140402054831.19080.27006.stgit@ltc230.yrl.intra.hitachi.co.jpSigned-off-by: NJiri Olsa <jolsa@redhat.com>
-
由 Namhyung Kim 提交于
The commit 5a62257a ("perf probe: Replace line_list with intlist") replaced line_list to intlist but it has a problem that if a same line was added again, it'd return -EEXIST rather than 1. Since line_range_walk_cb() only checks the result being negative, it resulted in failure or segfault sometimes. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/1396327677-3657-1-git-send-email-namhyung@kernel.orgSigned-off-by: NJiri Olsa <jolsa@redhat.com>
-
- 18 2月, 2014 3 次提交
-
-
由 Masami Hiramatsu 提交于
Support distro-style debuginfo supported by dso for setting uprobes. Note that this tries to find a debuginfo file based on the real path of the target binary. If the debuginfo is not correctly installed on the system, this can not find it. Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David Ahern <dsahern@gmail.com> Cc: "David A. Long" <dave.long@linaro.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20140206053227.29635.54434.stgit@kbuild-fedora.yrl.intra.hitachi.co.jpSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Masami Hiramatsu 提交于
Find the given address from offline dwarfs instead of online kernel dwarfs. On the KASLR enabled kernel, the kernel text section is loaded with random offset, and the debuginfo__new_online_kernel can't handle it. So let's move to the offline dwarf loader instead of using the online dwarf loader. As a result, since we don't need debuginfo__new_online_kernel any more, this also removes the functions related to that. Without this change; # ./perf probe -l probe:t_show (on _stext+901288 with m v) probe:t_show_1 (on _stext+939624 with m v t) probe:t_show_2 (on _stext+980296 with m v fmt) probe:t_show_3 (on _stext+1014392 with m v file) With this change; # ./perf probe -l probe:t_show (on t_show@linux-3/kernel/trace/ftrace.c with m v) probe:t_show_1 (on t_show@linux-3/kernel/trace/trace.c with m v t) probe:t_show_2 (on t_show@kernel/trace/trace_printk.c with m v fmt) probe:t_show_3 (on t_show@kernel/trace/trace_events.c with m v file) Changes from v2: - Instead of retrying, directly opens offline dwarf. - Remove debuginfo__new_online_kernel and related functions. - Refer map->reloc to get the correct address of a symbol. - Add a special case for handling ref_reloc_sym based address. Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David Ahern <dsahern@gmail.com> Cc: "David A. Long" <dave.long@linaro.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20140206053218.29635.74821.stgit@kbuild-fedora.yrl.intra.hitachi.co.jpSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Masami Hiramatsu 提交于
Replace line_list (struct line_node) with intlist for reducing similar codes. Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: NNamhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: "David A. Long" <dave.long@linaro.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20140206053209.29635.81043.stgit@kbuild-fedora.yrl.intra.hitachi.co.jpSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 28 12月, 2013 2 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Several areas already used this technique, so do some audit to consistently use it elsewhere. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-9sbere0kkplwe45ak6rk4a1f@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
For the frequent idiom of: free(ptr); ptr = NULL; Make it expect a pointer to the pointer being freed, so that it becomes clear at first sight that the variable being freed is being modified. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-pfw02ezuab37kha18wlut7ir@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 27 12月, 2013 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Its perfectly fine to call free(NULL), so no need to clutter the source code with all those superfluous testing. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-uux5wpvevlerd42gqer13e7n@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 26 12月, 2013 1 次提交
-
-
由 Masami Hiramatsu 提交于
Support basic dwarf(debuginfo) based operations for uprobe events. With this change, perf probe can analyze debuginfo of user application binary to set up new uprobe event. This allows perf-probe --add(with local variables, line numbers) and --line works with -x option. (Actually, --vars has already accepted -x option) For example, the following command shows the probe-able lines of a given user space function. Something that so far was only available in the 'perf probe' tool for kernel space functions: # ./perf probe -x perf --line map__load <map__load@/home/fedora/ksrc/linux-2.6/tools/perf/util/map.c:0> 0 int map__load(struct map *map, symbol_filter_t filter) 1 { 2 const char *name = map->dso->long_name; int nr; 5 if (dso__loaded(map->dso, map->type)) 6 return 0; 8 nr = dso__load(map->dso, map, filter); 9 if (nr < 0) { 10 if (map->dso->has_build_id) { And this shows the available variables at the given line of the function. # ./perf probe -x perf --vars map__load:8 Available variables at map__load:8 @<map__load+96> char* name struct map* map symbol_filter_t filter @<map__find_symbol+112> char* name symbol_filter_t filter @<map__find_symbol_by_name+136> char* name symbol_filter_t filter @<map_groups__find_symbol_by_name+176> char* name struct map* map symbol_filter_t filter And lastly, we can now define probe(s) with all available variables on the given line: # ./perf probe -x perf --add 'map__load:8 $vars' Added new events: probe_perf:map__load (on map__load:8 with $vars) probe_perf:map__load_1 (on map__load:8 with $vars) probe_perf:map__load_2 (on map__load:8 with $vars) probe_perf:map__load_3 (on map__load:8 with $vars) You can now use it in all perf tools, such as: perf record -e probe_perf:map__load_3 -aR sleep 1 Changes from previous version: - Add examples in the patch description. - Use .text section start address and dwarf symbol address for calculating the offset of given symbol, instead of searching the symbol in symtab again. With this change, we can safely handle multiple local function instances (e.g. scnprintf in perf). Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David Ahern <dsahern@gmail.com> Cc: David A. Long <dave.long@linaro.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: systemtap@sourceware.org Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20131226054152.22364.47021.stgit@kbuild-fedora.novalocalSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 06 11月, 2013 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
They convey no information, perhaps I was bitten by some snake at some point, complete the detox by naming the last of those arguments more sensibly. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-u1r0dnjoro08dgztiy2g3t2q@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 04 11月, 2013 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
s/tyep/type/g. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-cznw5tnruonyoisxu8be11bv@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 23 10月, 2013 2 次提交
-
-
由 Masami Hiramatsu 提交于
At this point, --fentry (mcount function entry) option for gcc fuzzes the debuginfo variable locations by skipping the mcount instruction offset (on x86, this is a 5 byte call instruction). This makes variable searching fail at the entry of functions which are mcount'ed. e.g.) Available variables at vfs_read @<vfs_read+0> (No matched variables) This patch adds additional location search at the function entry point to solve this issue, which tries to find the earliest address for the variable location. Note that this only works with function parameters (formal parameters) because any local variables should not exist on the function entry address (those are not initialized yet). With this patch, perf probe shows correct parameters if possible; # perf probe --vars vfs_read Available variables at vfs_read @<vfs_read+0> char* buf loff_t* pos size_t count struct file* file Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131011071025.15557.13275.stgit@udc4-manage.rcp.hitachi.co.jpSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Masami Hiramatsu 提交于
Support "$vars" meta argument syntax for tracing all local variables at probe point. Now you can trace all available local variables (including function parameters) at the probe point by passing $vars. # perf probe --add foo $vars This automatically finds all local variables at foo() and adds it as probe arguments. Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131011071023.15557.51770.stgit@udc4-manage.rcp.hitachi.co.jpSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 16 10月, 2013 1 次提交
-
-
由 Masami Hiramatsu 提交于
Fix perf probe --list to initialize fname local var always before use it. This may cause a SEGV if there is a probe which is in the function body but not in any inline function. Problem introduced in: commit e08cfd4b Author: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Date: Mon Sep 30 18:21:44 2013 +0900 perf probe: Fix to find line information for probe list Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20131011122317.9662.29736.stgit@kbuild-fedora.novalocalSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 05 10月, 2013 1 次提交
-
-
由 Masami Hiramatsu 提交于
Fix to find the correct (as much as possible) line information for listing probes. Without this fix, perf probe --list action will show incorrect line information as below; probe:getname_flags (on getname_flags@ksrc/linux-3/fs/namei.c) probe:getname_flags_1 (on getname:-89@x86/include/asm/current.h) probe:getname_flags_2 (on user_path_at_empty:-2054@x86/include/asm/current.h) The minus line number is obviously wrong, and current.h is not related to the probe point. Deeper investigation discovered that there were 2 issues related to this bug, and minor typos too. The 1st issue is the rack of considering about nested inlined functions, which causes the wrong (relative) line number. The 2nd issue is that the dwarf line info is not correct at those points. It points 14th line of current.h. Since it seems that the line info includes somewhat unreliable information, this fixes perf to try to find correct line information from both of debuginfo and line info as below. 1) Probe address is the entry of a function instance In this case, the line is set as the function declared line. 2) Probe address is the entry of an expanded inline function block In this case, the line is set as the function call-site line. This means that the line number is relative from the entry line of caller function (which can be an inlined function if nested) 3) Probe address is inside a function instance or an expanded inline function block In this case, perf probe queries the line number from lineinfo and verify the function declared file is same as the file name queried from lineinfo. If the file name is different, it is a failure case. The probe address is shown as symbol+offset. 4) Probe address is not in the any function instance This is a failure case, the probe address is shown as symbol+offset. With this fix, perf probe -l shows correct probe lines as below; probe:getname_flags (on getname_flags@ksrc/linux-3/fs/namei.c) probe:getname_flags_1 (on getname:2@ksrc/linux-3/fs/namei.c) probe:getname_flags_2 (on user_path_at_empty:4@ksrc/linux-3/fs/namei.c) Changes at v2: - Fix typos in the function comments. (Thanks to Namhyung Kim) - Use die_find_top_inlinefunc instead of die_find_inlinefunc_next. Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20130930092144.1693.11058.stgit@udc4-manage.rcp.hitachi.co.jpSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 25 9月, 2013 1 次提交
-
-
由 Masami Hiramatsu 提交于
Fix perf probe to probe on some symbols which have some optimzation suffixes, e.g. ".part", ".isra", and ".constprop". To fix this issue, instead of using the DIE name, perf probe uses the symbol name found by dwfl_module_addrsym(). This also involves a perf probe --vars operation update which now shows the symbol name instead of the DIE name. Without this patch, putting a probe on an inlined function which was compiled with a suffixed symbol will fail like this: $ perf probe -v getname_flags probe-definition(0): getname_flags symbol:getname_flags file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Looking at the vmlinux_path (6 entries long) Using /lib/modules/3.11.0+/build/vmlinux for symbols found inline addr: 0xffffffff8119bb70 Probe point found: getname_flags+0 found inline addr: 0xffffffff8119bcb6 Probe point found: getname+6 found inline addr: 0xffffffff811a06a6 Probe point found: user_path_at_empty+6 find 3 probe_trace_events. Opening /sys/kernel/debug//tracing/kprobe_events write=1 Added new events: Writing event: p:probe/getname_flags getname_flags+0 Failed to write event: No such file or directory Error: Failed to add events. (-1) Because the debuginfo knows only the original (non suffix) symbol name, it uses the original symbol for probe address but the kernel (kallsyms) knows only suffixed symbol. Then, the kernel rejects that original symbol. This patch uses dwfl_module_addrsym() to get the correct (suffixed) symbol from symtab when a probe point is found. Reported-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20130925131616.31632.46658.stgit@udc4-manage.rcp.hitachi.co.jpSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 19 9月, 2013 1 次提交
-
-
由 Masami Hiramatsu 提交于
The commit ba28c59b fixed a declaration entry bug in probe_point_search_cb(). There are same bugs in line finder and call_probe_finder(). This introduces a new dwarf utility function to determine given DIE is a function definition, not declaration. Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Prashanth Nageshappa <prashanth@linux.vnet.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20120423032435.8737.80064.stgit@localhost.localdomainSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 25 1月, 2013 1 次提交
-
-
由 Hyeoncheol Lee 提交于
Before casting a type of a variable to string, convert_variable_type() confirms that the type is a pointer or an array. then if it is a pointer to char, it is casted to string. but in case of an array of char, it isn't Signed-off-by: NH.C. Lee <hyc.lee@gmail.com> Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/CANFS6bb75e8a_UtyAD9yF73hfXDy0N8tSjDz=a+Vna=Y8ORMHg@mail.gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 15 9月, 2012 1 次提交
-
-
由 Hyeoncheol Lee 提交于
Union members can be accessed with '.' or '->' like data structure member access Signed-off-by: NHyunchul Lee <hyc.lee@gmail.com> Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/CANFS6baeuSBxPGQ8SUZWZErJ2bWs-Nojg+FSo138E1QK8bJJig@mail.gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 11 9月, 2012 1 次提交
-
-
由 Irina Tirdea 提交于
perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com> Acked-by: NPekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05d in builtin-sched.c ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 28 3月, 2012 1 次提交
-
-
由 Prashanth Nageshappa 提交于
If DIE entries corresponding to declarations appear before definition entry, probe finder returns error instead of continuing to look further for a definition entry. This patch ensures we reach to the DIE entry corresponding to the definition and get the function address. V2: A simpler solution based on Masami's suggestion. Signed-off-by: NPrashanth Nageshappa <prashanth@linux.vnet.ibm.com> Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/4F703FB9.9020407@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 01 3月, 2012 1 次提交
-
-
由 Prashanth Nageshappa 提交于
The perf probe command allows kprobe to be inserted at any offset from a function start, which results in adding kprobes to unintended location. Example: perf probe do_fork+10000 is allowed even though size of do_fork is ~904. This patch will ensure probe addition fails when the offset specified is greater than size of the function. Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Baron <jbaron@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/4F473F33.4060409@linux.vnet.ibm.comSigned-off-by: NPrashanth Nageshappa <prashanth@linux.vnet.ibm.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 31 1月, 2012 1 次提交
-
-
由 Namhyung Kim 提交于
There are unnecessary #include <ctype.h> out there, and they might cause a nasty build failure in some environment. As we already have most of ctype macros in util.h, just get rid of them. A few of exceptions are util/symbol.c which needs isupper() macro util.h doesn't provide and perl scripting support code which includes ctype.h internally. Suggested-by: NIngo Molnar <mingo@elte.hu> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1327827356-8786-4-git-send-email-namhyung@gmail.comSigned-off-by: NNamhyung Kim <namhyung@gmail.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 24 9月, 2011 1 次提交
-
-
由 Masami Hiramatsu 提交于
Fix to call convert_variable() if previous call does not fail. To call convert_variable, it ensures "ret" is 0. However, since "ret" has the return value of synthesize_perf_probe_arg() which always returns positive value if it succeeded, perf probe doesn't call convert_variable(). This will cause a SEGV when we add an event with arguments. This has to be fixed as it ensures "ret" is greater than 0 (or not negative). This regression has been introduced by my previous patch, f182e3e1. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20110820053922.3286.65805.stgit@fedora15Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 12 8月, 2011 5 次提交
-
-
由 Masami Hiramatsu 提交于
gcc 4.6 generates a concrete out-of-line instance when there is a function which is implicitly inlined somewhere but also has its own instance. The concrete out-of-line instance means that it has an abstract origin of the function which is referred by not only inlined-subroutines but also a concrete subprogram. Since current dwarf_func_inline_instances() can find only instances of inlined-subroutines, this introduces new die_walk_instances() to find both of subprogram and inlined-subroutines. e.g. without this, Available variables at sched_group_rt_period @<cpu_rt_period_read_uint+9> struct task_group* tg perf probe failed to find actual subprogram instance of sched_group_rt_period(). With this, Available variables at sched_group_rt_period @<cpu_rt_period_read_uint+9> struct task_group* tg @<sched_group_rt_period+0> struct task_group* tg Now it found the sched_group_rt_period() itself. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20110811110311.19900.63997.stgit@fedora15Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Masami Hiramatsu 提交于
Fix variable searching logic to search one in inner than local scope or global(CU) scope. In the other words, skip searching in intermediate scopes. e.g., in the following code, int var1; void inline infunc(int i) { i++; <--- [A] } void func(void) { int var1, var2; infunc(var2); } At [A], "var1" should point the global variable "var1", however, if user mis-typed as "var2", variable search should be failed. However, current logic searches variable infunc() scope, global scope, and then func() scope. Thus, it can find "var2" variable in func() scope. This may not be what user expects. So, it would better not search outer scopes except outermost (compile unit) scope which contains only global variables, when it failed to find given variable in local scope. E.g. Without this: $ perf probe -V pre_schedule --externs > without.vars With this: $ perf probe -V pre_schedule --externs > with.vars Check the diff: $ diff without.vars with.vars 88d87 < int cpu 133d131 < long unsigned int* switch_count These vars are actually in the scope of schedule(), the caller of pre_schedule(). Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20110811110305.19900.94374.stgit@fedora15Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Masami Hiramatsu 提交于
Fix perf probe to search local variables in appropriate local inlined function scope. For example, pre_schedule() has only 2 local variables, as below; $ perf probe -L pre_schedule <pre_schedule@/home/mhiramat/ksrc/linux-2.6/kernel/sched.c:0> 0 static inline void pre_schedule(struct rq *rq, struct task_struct *prev) { 2 if (prev->sched_class->pre_schedule) 3 prev->sched_class->pre_schedule(rq, prev); } However, current perf probe shows 4 local variables on pre_schedule(), because it searches variables in the caller(schedule()) scope. $ perf probe -V pre_schedule Available variables at pre_schedule @<schedule+445> int cpu long unsigned int* switch_count struct rq* rq struct task_struct* prev This patch fixes this issue by searching variables in the local scope of the instance of inlined function. Here is the result. $ perf probe -V pre_schedule Available variables at pre_schedule @<schedule+445> struct rq* rq struct task_struct* prev Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20110811110259.19900.85664.stgit@fedora15Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Masami Hiramatsu 提交于
Fix line-range collector to walk all instances of inlined function, because some execution paths can be optimized out depending on the function argument of instances. E.g.) inline_func (arg) { if (arg) do_something; else do_another; } func_A() { inline_func(1) } func_B() { inline_func(0) } In this case, func_A may have only do_something code and func_B may have only do_another. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <masami.hiramatsu@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20110811110247.19900.93702.stgit@fedora15Signed-off-by: NMasami Hiramatsu <masami.hiramatsu@gmail.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Masami Hiramatsu 提交于
Fix a memory leak for scopes array when it finds a variable in the global scope. Reviewed-by: NPekka Enberg <penberg@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20110811110229.19900.63019.stgit@fedora15Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 16 7月, 2011 4 次提交
-
-
由 Masami Hiramatsu 提交于
Introduce debuginfo to encapsulate dwarf information. This new object allows us to reuse and expand debuginfo easily. Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Link: http://lkml.kernel.org/r/20110627072739.6528.12438.stgit@fedora15Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Masami Hiramatsu 提交于
Move dwarf library related routines to dwarf-aux.{c,h}. This includes several minor changes. - Add simple documents for each API. - Rename die_find_real_subprogram() to die_find_realfunc() - Rename line_walk_handler_t to line_walk_callback_t. - Minor cleanups. Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Link: http://lkml.kernel.org/r/20110627072727.6528.57647.stgit@fedora15Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Masami Hiramatsu 提交于
Since there are dwarf_bitsize, dwarf_bitoffset and dwarf_bytesize defined in libdw, we don't need die_get_bit_size, die_get_bit_offset and die_get_byte_size anymore. Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Link: http://lkml.kernel.org/r/20110627072721.6528.2747.stgit@fedora15Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Masami Hiramatsu 提交于
Since strtailcmp() is enough generic, it should be defined in string.c. Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Link: http://lkml.kernel.org/r/20110627072715.6528.10677.stgit@fedora15Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-