Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 161
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 12 10月, 2019 12 次提交
  3. 08 10月, 2019 2 次提交
  5. 05 10月, 2019 5 次提交
    • S
      arm64: dts: rockchip: limit clock rate of MMC controllers for RK3328 · 174bbcc5
      由 Shawn Lin 提交于 
      commit 03e61929c0d227ed3e1c322fc3804216ea298b7e upstream.

150MHz is a fundamental limitation of RK3328 Soc, w/o this limitation,
eMMC, for instance, will run into 200MHz clock rate in HS200 mode, which
makes the RK3328 boards not always boot properly. By adding it in
rk3328.dtsi would also obviate the worry of missing it when adding new
boards.

Fixes: 52e02d37 ("arm64: dts: rockchip: add core dtsi file for RK3328 SoCs")
Cc: stable@vger.kernel.org
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Liang Chen <cl@rock-chips.com>
Signed-off-by: NShawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      174bbcc5
    • W
      arm64: tlb: Ensure we execute an ISB following walk cache invalidation · 8cfe3b8a
      由 Will Deacon 提交于 
      commit 51696d346c49c6cf4f29e9b20d6e15832a2e3408 upstream.

05f2d2f8 ("arm64: tlbflush: Introduce __flush_tlb_kernel_pgtable")
added a new TLB invalidation helper which is used when freeing
intermediate levels of page table used for kernel mappings, but is
missing the required ISB instruction after completion of the TLBI
instruction.

Add the missing barrier.

Cc: <stable@vger.kernel.org>
Fixes: 05f2d2f8 ("arm64: tlbflush: Introduce __flush_tlb_kernel_pgtable")
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NWill Deacon <will@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      8cfe3b8a
    • W
      Revert "arm64: Remove unnecessary ISBs from set_{pte,pmd,pud}" · fc7d6bfd
      由 Will Deacon 提交于 
      commit d0b7a302d58abe24ed0f32a0672dd4c356bb73db upstream.

This reverts commit 24fe1b0e.

Commit 24fe1b0e ("arm64: Remove unnecessary ISBs from
set_{pte,pmd,pud}") removed ISB instructions immediately following updates
to the page table, on the grounds that they are not required by the
architecture and a DSB alone is sufficient to ensure that subsequent data
accesses use the new translation:

  DDI0487E_a, B2-128:

  | ... no instruction that appears in program order after the DSB
  | instruction can alter any state of the system or perform any part of
  | its functionality until the DSB completes other than:
  |
  | * Being fetched from memory and decoded
  | * Reading the general-purpose, SIMD and floating-point,
  |   Special-purpose, or System registers that are directly or indirectly
  |   read without causing side-effects.

However, the same document also states the following:

  DDI0487E_a, B2-125:

  | DMB and DSB instructions affect reads and writes to the memory system
  | generated by Load/Store instructions and data or unified cache
  | maintenance instructions being executed by the PE. Instruction fetches
  | or accesses caused by a hardware translation table access are not
  | explicit accesses.

which appears to claim that the DSB alone is insufficient.  Unfortunately,
some CPU designers have followed the second clause above, whereas in Linux
we've been relying on the first. This means that our mapping sequence:

	MOV	X0, <valid pte>
	STR	X0, [Xptep]	// Store new PTE to page table
	DSB	ISHST
	LDR	X1, [X2]	// Translates using the new PTE

can actually raise a translation fault on the load instruction because the
translation can be performed speculatively before the page table update and
then marked as "faulting" by the CPU. For user PTEs, this is ok because we
can handle the spurious fault, but for kernel PTEs and intermediate table
entries this results in a panic().

Revert the offending commit to reintroduce the missing barriers.

Cc: <stable@vger.kernel.org>
Fixes: 24fe1b0e ("arm64: Remove unnecessary ISBs from set_{pte,pmd,pud}")
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NWill Deacon <will@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      fc7d6bfd
    • M
      arm64: kpti: ensure patched kernel text is fetched from PoU · eb2485e3
      由 Mark Rutland 提交于 
      [ Upstream commit f32c7a8e45105bd0af76872bf6eef0438ff12fb2 ]

While the MMUs is disabled, I-cache speculation can result in
instructions being fetched from the PoC. During boot we may patch
instructions (e.g. for alternatives and jump labels), and these may be
dirty at the PoU (and stale at the PoC).

Thus, while the MMU is disabled in the KPTI pagetable fixup code we may
load stale instructions into the I-cache, potentially leading to
subsequent crashes when executing regions of code which have been
modified at runtime.

Similarly to commit:

  8ec41987 ("arm64: mm: ensure patched kernel text is fetched from PoU")

... we can invalidate the I-cache after enabling the MMU to prevent such
issues.

The KPTI pagetable fixup code itself should be clean to the PoC per the
boot protocol, so no maintenance is required for this code.
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NJames Morse <james.morse@arm.com>
Signed-off-by: NWill Deacon <will@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      eb2485e3
    • Q
      arm64/prefetch: fix a -Wtype-limits warning · 7d75275f
      由 Qian Cai 提交于 
      [ Upstream commit b99286b088ea843b935dcfb29f187697359fe5cd ]

The commit d5370f75 ("arm64: prefetch: add alternative pattern for
CPUs without a prefetcher") introduced MIDR_IS_CPU_MODEL_RANGE() to be
used in has_no_hw_prefetch() with rv_min=0 which generates a compilation
warning from GCC,

In file included from ./arch/arm64/include/asm/cache.h:8,
               from ./include/linux/cache.h:6,
               from ./include/linux/printk.h:9,
               from ./include/linux/kernel.h:15,
               from ./include/linux/cpumask.h:10,
               from arch/arm64/kernel/cpufeature.c:11:
arch/arm64/kernel/cpufeature.c: In function 'has_no_hw_prefetch':
./arch/arm64/include/asm/cputype.h:59:26: warning: comparison of
unsigned expression >= 0 is always true [-Wtype-limits]
_model == (model) && rv >= (rv_min) && rv <= (rv_max);  \
                        ^~
arch/arm64/kernel/cpufeature.c:889:9: note: in expansion of macro
'MIDR_IS_CPU_MODEL_RANGE'
return MIDR_IS_CPU_MODEL_RANGE(midr, MIDR_THUNDERX,
       ^~~~~~~~~~~~~~~~~~~~~~~

Fix it by converting MIDR_IS_CPU_MODEL_RANGE to a static inline
function.
Signed-off-by: NQian Cai <cai@lca.pw>
Signed-off-by: NWill Deacon <will@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      7d75275f
  7. 21 9月, 2019 1 次提交
  9. 16 9月, 2019 2 次提交
  11. 06 9月, 2019 1 次提交
    • W
      arm64: cpufeature: Don't treat granule sizes as strict · 8bd54268
      由 Will Deacon 提交于 
      [ Upstream commit 5717fe5ab38f9ccb32718bcb03bea68409c9cce4 ]

If a CPU doesn't support the page size for which the kernel is
configured, then we will complain and refuse to bring it online. For
secondary CPUs (and the boot CPU on a system booting with EFI), we will
also print an error identifying the mismatch.

Consequently, the only time that the cpufeature code can detect a
granule size mismatch is for a granule other than the one that is
currently being used. Although we would rather such systems didn't
exist, we've unfortunately lost that battle and Kevin reports that
on his amlogic S922X (odroid-n2 board) we end up warning and taining
with defconfig because 16k pages are not supported by all of the CPUs.

In such a situation, we don't actually care about the feature mismatch,
particularly now that KVM only exposes the sanitised view of the CPU
registers (commit 93390c0a - "arm64: KVM: Hide unsupported AArch64
CPU features from guests"). Treat the granule fields as non-strict and
let Kevin run without a tainted kernel.

Cc: Marc Zyngier <maz@kernel.org>
Reported-by: NKevin Hilman <khilman@baylibre.com>
Tested-by: NKevin Hilman <khilman@baylibre.com>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Acked-by: NSuzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: NWill Deacon <will@kernel.org>
[catalin.marinas@arm.com: changelog updated with KVM sanitised regs commit]
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      8bd54268
  13. 29 8月, 2019 1 次提交
    • M
      KVM: arm64: Don't write junk to sysregs on reset · d5cb5b49
      由 Marc Zyngier 提交于 
      [ Upstream commit 03fdfb2690099c19160a3f2c5b77db60b3afeded ]

At the moment, the way we reset system registers is mildly insane:
We write junk to them, call the reset functions, and then check that
we have something else in them.

The "fun" thing is that this can happen while the guest is running
(PSCI, for example). If anything in KVM has to evaluate the state
of a system register while junk is in there, bad thing may happen.

Let's stop doing that. Instead, we track that we have called a
reset function for that register, and assume that the reset
function has done something. This requires fixing a couple of
sysreg refinition in the trap table.

In the end, the very need of this reset check is pretty dubious,
as it doesn't check everything (a lot of the sysregs leave outside of
the sys_regs[] array). It may well be axed in the near future.
Tested-by: NZenghui Yu <yuzenghui@huawei.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      d5cb5b49
  15. 25 8月, 2019 5 次提交
    • W
      arm64: ftrace: Ensure module ftrace trampoline is coherent with I-side · 30b9da0e
      由 Will Deacon 提交于 
      commit b6143d10d23ebb4a77af311e8b8b7f019d0163e6 upstream.

The initial support for dynamic ftrace trampolines in modules made use
of an indirect branch which loaded its target from the beginning of
a special section (e71a4e1b ("arm64: ftrace: add support for far
branches to dynamic ftrace")). Since no instructions were being patched,
no cache maintenance was needed. However, later in be0f272b ("arm64:
ftrace: emit ftrace-mod.o contents through code") this code was reworked
to output the trampoline instructions directly into the PLT entry but,
unfortunately, the necessary cache maintenance was overlooked.

Add a call to __flush_icache_range() after writing the new trampoline
instructions but before patching in the branch to the trampoline.

Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: James Morse <james.morse@arm.com>
Cc: <stable@vger.kernel.org>
Fixes: be0f272b ("arm64: ftrace: emit ftrace-mod.o contents through code")
Signed-off-by: NWill Deacon <will@kernel.org>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      30b9da0e
    • A
      arm64: KVM: regmap: Fix unexpected switch fall-through · c8d95668
      由 Anders Roxell 提交于 
      commit 3d584a3c85d6fe2cf878f220d4ad7145e7f89218 upstream.

When fall-through warnings was enabled by default, commit d93512ef0f0e
("Makefile: Globally enable fall-through warning"), the following
warnings was starting to show up:

In file included from ../arch/arm64/include/asm/kvm_emulate.h:19,
                 from ../arch/arm64/kvm/regmap.c:13:
../arch/arm64/kvm/regmap.c: In function ‘vcpu_write_spsr32’:
../arch/arm64/include/asm/kvm_hyp.h:31:3: warning: this statement may fall
 through [-Wimplicit-fallthrough=]
   asm volatile(ALTERNATIVE(__msr_s(r##nvh, "%x0"), \
   ^~~
../arch/arm64/include/asm/kvm_hyp.h:46:31: note: in expansion of macro ‘write_sysreg_elx’
 #define write_sysreg_el1(v,r) write_sysreg_elx(v, r, _EL1, _EL12)
                               ^~~~~~~~~~~~~~~~
../arch/arm64/kvm/regmap.c:180:3: note: in expansion of macro ‘write_sysreg_el1’
   write_sysreg_el1(v, SYS_SPSR);
   ^~~~~~~~~~~~~~~~
../arch/arm64/kvm/regmap.c:181:2: note: here
  case KVM_SPSR_ABT:
  ^~~~
In file included from ../arch/arm64/include/asm/cputype.h:132,
                 from ../arch/arm64/include/asm/cache.h:8,
                 from ../include/linux/cache.h:6,
                 from ../include/linux/printk.h:9,
                 from ../include/linux/kernel.h:15,
                 from ../include/asm-generic/bug.h:18,
                 from ../arch/arm64/include/asm/bug.h:26,
                 from ../include/linux/bug.h:5,
                 from ../include/linux/mmdebug.h:5,
                 from ../include/linux/mm.h:9,
                 from ../arch/arm64/kvm/regmap.c:11:
../arch/arm64/include/asm/sysreg.h:837:2: warning: this statement may fall
 through [-Wimplicit-fallthrough=]
  asm volatile("msr " __stringify(r) ", %x0"  \
  ^~~
../arch/arm64/kvm/regmap.c:182:3: note: in expansion of macro ‘write_sysreg’
   write_sysreg(v, spsr_abt);
   ^~~~~~~~~~~~
../arch/arm64/kvm/regmap.c:183:2: note: here
  case KVM_SPSR_UND:
  ^~~~

Rework to add a 'break;' in the swich-case since it didn't have that,
leading to an interresting set of bugs.

Cc: stable@vger.kernel.org # v4.17+
Fixes: a8928195 ("KVM: arm64: Prepare to handle deferred save/restore of 32-bit registers")
Signed-off-by: NAnders Roxell <anders.roxell@linaro.org>
[maz: reworked commit message, fixed stable range]
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c8d95668
    • Q
      arm64/mm: fix variable 'pud' set but not used · 4a0d2eee
      由 Qian Cai 提交于 
      [ Upstream commit 7d4e2dcf311d3b98421d1f119efe5964cafa32fc ]

GCC throws a warning,

arch/arm64/mm/mmu.c: In function 'pud_free_pmd_page':
arch/arm64/mm/mmu.c:1033:8: warning: variable 'pud' set but not used
[-Wunused-but-set-variable]
  pud_t pud;
        ^~~

because pud_table() is a macro and compiled away. Fix it by making it a
static inline function and for pud_sect() as well.
Signed-off-by: NQian Cai <cai@lca.pw>
Signed-off-by: NWill Deacon <will@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      4a0d2eee
    • M
      arm64: unwind: Prohibit probing on return_address() · 6af9263f
      由 Masami Hiramatsu 提交于 
      [ Upstream commit ee07b93e7721ccd5d5b9fa6f0c10cb3fe2f1f4f9 ]

Prohibit probing on return_address() and subroutines which
is called from return_address(), since the it is invoked from
trace_hardirqs_off() which is also kprobe blacklisted.
Reported-by: NNaresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NWill Deacon <will@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      6af9263f
    • Q
      arm64/efi: fix variable 'si' set but not used · ffb1a76d
      由 Qian Cai 提交于 
      [ Upstream commit f1d4836201543e88ebe70237e67938168d5fab19 ]

GCC throws out this warning on arm64.

drivers/firmware/efi/libstub/arm-stub.c: In function 'efi_entry':
drivers/firmware/efi/libstub/arm-stub.c:132:22: warning: variable 'si'
set but not used [-Wunused-but-set-variable]

Fix it by making free_screen_info() a static inline function.
Acked-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQian Cai <cai@lca.pw>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      ffb1a76d
  17. 07 8月, 2019 3 次提交
  19. 04 8月, 2019 1 次提交
  21. 31 7月, 2019 1 次提交
  23. 26 7月, 2019 6 次提交