Initial support for the r8a7779 SoC and the Marzen board (V2).

Only SCIF ports and the TMU are supported at this point.

To keep things simple only entity-mapped virt-to-phys mappings
are supported. This forces drivers and other SoC glue code to
make use of ioremap(). We cannot support early serial console
due to virtual address space collisions with the ARM kernel.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Conflicts:
	arch/arm/mach-shmobile/clock-sh73a0.c
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into rmobile-latest

Conflicts:
	arch/arm/mach-shmobile/Makefile
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Add PFC support for a 32-bit unlock register. Needed to
drive the r8a7779 PFC that comes with a funky PMMR register.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Add support for variable config reg hardware by adding
the macro PINMUX_CFG_REG_VAR(). The width of each bitfield
needs to be passed to the macro, and the correct space must
be consumed by each bitfield in the enum table following the
macro. Data registers still need to have fixed bitfields.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Add a helper function for shared config reg access
calculations. This allows us to reduce the amount
of duplicated code, and at the same time prepare
for a common place for future variable bitwidth
config reg support.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Update the way the PFC code is passing bitfield
selection between configure register functions.

Convert the code from using index only to bitfield
number and selected value. First step towards future
variable bitfield width support.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Introduce gpio_read_bit() for data register read access
and modify sh_gpio_get_value() to make use of the new
function instead of gpio_read_reg(). The purpose of
this change is to update the code to only use the
gpio_read_reg() function for config register access.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

A call to va_copy() should always be followed by a call to va_end() in
the same function.  In kernel/autit.c::audit_log_vformat() this is not
always done.  This patch makes sure va_end() is always called.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We leak in drivers/scsi/aacraid/commctrl.c::aac_send_raw_srb() :

We allocate memory:

	...
	struct user_sgmap* usg;
	usg = kmalloc(actual_fibsize - sizeof(struct aac_srb)
	  + sizeof(struct sgmap), GFP_KERNEL);

and then neglect to free it:

	...
	for (i = 0; i < usg->count; i++) {
		u64 addr;
		void* p;
		if (usg->sg[i].count >
		    ((dev->adapter_info.options &
		     AAC_OPT_NEW_COMM) ?
		      (dev->scsi_host_ptr->max_sectors << 9) :
		      65536)) {
			rcode = -EINVAL;
			goto cleanup;
	... this 'goto' makes 'usg' go out of scope and leak the memory we
	    allocated.

Other exits properly kfree(usg), it's just here it is neglected.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

infiniband changes for 3.3 merge window

* tag 'infiniband-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  rdma/core: Fix sparse warnings
  RDMA/cma: Fix endianness bugs
  RDMA/nes: Fix terminate during AE
  RDMA/nes: Make unnecessarily global nes_set_pau() static
  RDMA/nes: Change MDIO bus clock to 2.5MHz
  IB/cm: Fix layout of APR message
  IB/mlx4: Fix SL to 802.1Q priority-bits mapping for IBoE
  IB/qib: Default some module parameters optimally
  IB/qib: Optimize locking for get_txreq()
  IB/qib: Fix a possible data corruption when receiving packets
  IB/qib: Eliminate 64-bit jiffies use
  IB/qib: Fix style issues
  IB/uverbs: Protect QP multicast list

* 'dma-buf-merge' of git://people.freedesktop.org/~airlied/linux:
  dma-buf: mark EXPERIMENTAL for 1st release.
  dma-buf: Documentation for buffer sharing framework
  dma-buf: Introduce dma buffer sharing mechanism

Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  max1111.c: fix checkpatch warning
  hwmon: (lm75) fix checkpatch warnings
  hwmon: (lm80) fix checkpatch messages
  hwmon: replaced strict_str* with kstr*
  hwmon: (lm75) fix checkpatch warning
  hwmon: (lm75) added error handling
  hwmon: (ltc4261) set data->valid to 0 if error
  hwmon: (f75375s) Add support for F75387SG/RG
  hwmon: (f75375s) Disable setting DC fan control mode for F75373
  hwmon: (f75375s) Initialize pwmX_mode and pwmX_enable if there is no platform data
  hwmon: (f75375s) Fix value range for PWM modes
  hwmon: (f75375s) Use standard sysfs attribute names
  hwmon: (f75375s) Fix checkpatch errors and warnings
  hwmon: (pmbus/zl6100) Only instantiate external temperature sensor if enabled
  hwmon: (pmbus/zl6100) Add support for Ericsson BMR45[0,1] and BMR46[2,3,4]
  hwmon: (pmbus/zl6100) Add support for ZL2005
  hwmon: (pmbus/adm1275) Validate device ID

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (36 commits)
  mfd: Clearing events requires event registers to be writable for da9052-core
  mfd: Fix annotations in da9052-core
  gpiolib: Mark da9052 driver broken
  mfd: Declare da9052_regmap_config for the bus drivers
  MFD: DA9052/53 MFD core module add SPI support v2
  MFD: DA9052/53 MFD core module
  regmap: Add irq_base accessor to regmap_irq
  regmap: Allow drivers to reinitialise the register cache at runtime
  regmap: Add trace event for successful cache reads
  regmap: Allow regmap_update_bits() users to detect changes
  regmap: Report if we actually handled an interrupt in regmap-irq
  regmap: Fix rbtreee build when not using debugfs
  regmap: Provide debugfs dump of the rbtree cache data
  regmap: Do debugfs init before cache init
  regmap: Suppress noop writes in regmap_update_bits()
  regmap: Remove indexed cache type
  regmap: Drop check whether a register is readable in regcache_read
  regmap: Properly round cache_word_size
  regmap: Add support for 10/14 register formating
  regmap: Try cached read before checking if a hardware read is possible
  ...

md update for 3.3

Big change is new hot-replacement.
A slot in an array can hold 2 devices - one that
wants-replacement and one that is the replacement.
Once the replacement is built - either from the
original or (in the case of errors) from elsewhere,
the wants-replacement device will be removed.

* tag 'md-3.3' of git://neil.brown.name/md: (36 commits)
  md/raid1: Mark device want_replacement when we see a write error.
  md/raid1: If there is a spare and a want_replacement device, start replacement.
  md/raid1: recognise replacements when assembling arrays.
  md/raid1: handle activation of replacement device when recovery completes.
  md/raid1: Allow a failed replacement device to be removed.
  md/raid1: Allocate spare to store replacement devices and their bios.
  md/raid1:  Replace use of mddev->raid_disks with conf->raid_disks.
  md/raid10: If there is a spare and a want_replacement device, start replacement.
  md/raid10: recognise replacements when assembling array.
  md/raid10: Allow replacement device to be replace old drive.
  md/raid10: handle recovery of replacement devices.
  md/raid10:  Handle replacement devices during resync.
  md/raid10: writes should get directed to replacement as well as original.
  md/raid10: allow removal of failed replacement devices.
  md/raid10: preferentially read from replacement device if possible.
  md/raid10:  change read_balance to return an rdev
  md/raid10: prepare data structures for handling replacement.
  md/raid5: Mark device want_replacement when we see a write error.
  md/raid5: If there is a spare and a want_replacement device, start replacement.
  md/raid5: recognise replacements when assembling array.
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits)
  Kconfig: acpi: Fix typo in comment.
  misc latin1 to utf8 conversions
  devres: Fix a typo in devm_kfree comment
  btrfs: free-space-cache.c: remove extra semicolon.
  fat: Spelling s/obsolate/obsolete/g
  SCSI, pmcraid: Fix spelling error in a pmcraid_err() call
  tools/power turbostat: update fields in manpage
  mac80211: drop spelling fix
  types.h: fix comment spelling for 'architectures'
  typo fixes: aera -> area, exntension -> extension
  devices.txt: Fix typo of 'VMware'.
  sis900: Fix enum typo 'sis900_rx_bufer_status'
  decompress_bunzip2: remove invalid vi modeline
  treewide: Fix comment and string typo 'bufer'
  hyper-v: Update MAINTAINERS
  treewide: Fix typos in various parts of the kernel, and fix some comments.
  clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR
  gpio: Kconfig: drop unknown symbol 'CS5535_GPIO'
  leds: Kconfig: Fix typo 'D2NET_V2'
  sound: Kconfig: drop unknown symbol ARCH_CLPS7500
  ...

Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new
kconfig additions, close to removed commented-out old ones)

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/apm:
  x86: Kconfig: drop unknown symbol 'APM_MODULE'

* 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits)
  PM / Hibernate: Implement compat_ioctl for /dev/snapshot
  PM / Freezer: fix return value of freezable_schedule_timeout_killable()
  PM / shmobile: Allow the A4R domain to be turned off at run time
  PM / input / touchscreen: Make st1232 use device PM QoS constraints
  PM / QoS: Introduce dev_pm_qos_add_ancestor_request()
  PM / shmobile: Remove the stay_on flag from SH7372's PM domains
  PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume
  PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode
  PM: Drop generic_subsys_pm_ops
  PM / Sleep: Remove forward-only callbacks from AMBA bus type
  PM / Sleep: Remove forward-only callbacks from platform bus type
  PM: Run the driver callback directly if the subsystem one is not there
  PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers
  PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412.
  PM / Sleep: Merge internal functions in generic_ops.c
  PM / Sleep: Simplify generic system suspend callbacks
  PM / Hibernate: Remove deprecated hibernation snapshot ioctls
  PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled()
  ARM: S3C64XX: Implement basic power domain support
  PM / shmobile: Use common always on power domain governor
  ...

Fix up trivial conflict in fs/xfs/xfs_buf.c due to removal of unused
XBT_FORCE_SLEEP bit

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
  GFS2: local functions should be static
  GFS2: We only need one ACL getting function
  GFS2: Fix multi-block allocation
  GFS2: decouple quota allocations from block allocations
  GFS2: split function rgblk_search
  GFS2: Fix up "off by one" in the previous patch
  GFS2: move toward a generic multi-block allocator
  GFS2: O_(D)SYNC support for fallocate
  GFS2: remove vestigial al_alloced
  GFS2: combine gfs2_alloc_block and gfs2_alloc_di
  GFS2: Add non-try locks back to get_local_rgrp
  GFS2: f_ra is always valid in dir readahead function
  GFS2: Fix very unlikley memory leak in ACL xattr code
  GFS2: More automated code analysis fixes
  GFS2: Add readahead to sequential directory traversal
  GFS2: Fix up REQ flags

* 'for-linus' of git://oss.sgi.com/xfs/xfs: (22 commits)
  xfs: mark the xfssyncd workqueue as non-reentrant
  xfs: simplify xfs_qm_detach_gdquots
  xfs: fix acl count validation in xfs_acl_from_disk()
  xfs: remove unused XBT_FORCE_SLEEP bit
  xfs: remove XFS_QMOPT_DQSUSER
  xfs: kill xfs_qm_idtodq
  xfs: merge xfs_qm_dqinit_core into the only caller
  xfs: add a xfs_dqhold helper
  xfs: simplify xfs_qm_dqattach_grouphint
  xfs: nest qm_dqfrlist_lock inside the dquot qlock
  xfs: flatten the dquot lock ordering
  xfs: implement lazy removal for the dquot freelist
  xfs: remove XFS_DQ_INACTIVE
  xfs: cleanup xfs_qm_dqlookup
  xfs: cleanup dquot locking helpers
  xfs: remove the sync_mode argument to xfs_qm_dqflush_all
  xfs: remove xfs_qm_sync
  xfs: make sure to really flush all dquots in xfs_qm_quotacheck
  xfs: untangle SYNC_WAIT and SYNC_TRYLOCK meanings for xfs_qm_dqflush
  xfs: remove the lid_size field in struct log_item_desc
  ...

Fix up trivial conflict in fs/xfs/xfs_sync.c

* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits)
  reiserfs: Properly display mount options in /proc/mounts
  vfs: prevent remount read-only if pending removes
  vfs: count unlinked inodes
  vfs: protect remounting superblock read-only
  vfs: keep list of mounts for each superblock
  vfs: switch ->show_options() to struct dentry *
  vfs: switch ->show_path() to struct dentry *
  vfs: switch ->show_devname() to struct dentry *
  vfs: switch ->show_stats to struct dentry *
  switch security_path_chmod() to struct path *
  vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb
  vfs: trim includes a bit
  switch mnt_namespace ->root to struct mount
  vfs: take /proc/*/mounts and friends to fs/proc_namespace.c
  vfs: opencode mntget() mnt_set_mountpoint()
  vfs: spread struct mount - remaining argument of next_mnt()
  vfs: move fsnotify junk to struct mount
  vfs: move mnt_devname
  vfs: move mnt_list to struct mount
  vfs: switch pnode.h macros to struct mount *
  ...

devicetree/next changes queued for v3.3 merge window

* tag 'devicetree-for-linus-20120104' of git://git.secretlab.ca/git/linux-2.6:
  ARM: prom.h: Fix build error by removing unneeded header file
  irq: check domain hwirq range for DT translate
  dt: add empty of_get_node/of_put_node functions
  of/pdt: fix section mismatch warning
  i2c-designware: add OF binding support
  dt/i2c: Enumerate some of the known trivial i2c devices
  dt: reform for_each_property to for_each_property_of_node
  ARM/of: allow *machine_desc.dt_compat to be const
  of/base: Take NULL string into account for property with multiple strings
  OF/device-tree: Add some entries to vendor-prefixes.txt

Fix up trivial add-add conflicts in include/linux/of.h

spi changes queued up for v3.3 merge window

* tag 'spi-for-linus-20120104' of git://git.secretlab.ca/git/linux-2.6:
  spi: Fix device unregistration when unregistering the bus master
  spi-topcliff-pch: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor
  spi-topcliff-pch: Support new device LAPIS Semiconductor ML7831 IOH
  spi/omap: Correct the error path
  spi/omap: call pm_runtime_disable in error path and remove
  spi/omap: Use a workqueue per omap2_mcspi controller

Changes queued in gpio/next for the start of the 3.3 merge window

* tag 'gpio-for-linus-20120104' of git://git.secretlab.ca/git/linux-2.6:
  gpio: Add decode of WM8994 GPIO configuration
  gpio: Convert GPIO drivers to module_platform_driver
  gpio: Fix typo in comment in Samsung driver
  gpio: Explicitly index samsung_gpio_cfgs
  gpio: Add Linus Walleij as gpio co-maintainer
  of: Add device tree selftests
  of: create of_phandle_args to simplify return of phandle parsing data
  gpio/powerpc: Eliminate duplication of of_get_named_gpio_flags()
  gpio/microblaze: Eliminate duplication of of_get_named_gpio_flags()
  gpiolib: output basic details and consolidate gpio device drivers
  pch_gpio: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor
  pch_gpio: Support new device LAPIS Semiconductor ML7831 IOH
  spi/pl022: make the chip deselect handling thread safe
  spi/pl022: add support for pm_runtime autosuspend
  spi/pl022: disable the PL022 block when unused
  spi/pl022: move device disable to workqueue thread
  spi/pl022: skip default configuration before suspending
  spi/pl022: fix build warnings
  spi/pl022: only enable RX interrupts when TX is complete

* 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (73 commits)
  arm: fix up some samsung merge sysdev conversion problems
  firmware: Fix an oops on reading fw_priv->fw in sysfs loading file
  Drivers:hv: Fix a bug in vmbus_driver_unregister()
  driver core: remove __must_check from device_create_file
  debugfs: add missing #ifdef HAS_IOMEM
  arm: time.h: remove device.h #include
  driver-core: remove sysdev.h usage.
  clockevents: remove sysdev.h
  arm: convert sysdev_class to a regular subsystem
  arm: leds: convert sysdev_class to a regular subsystem
  kobject: remove kset_find_obj_hinted()
  m86k: gpio - convert sysdev_class to a regular subsystem
  mips: txx9_sram - convert sysdev_class to a regular subsystem
  mips: 7segled - convert sysdev_class to a regular subsystem
  sh: dma - convert sysdev_class to a regular subsystem
  sh: intc - convert sysdev_class to a regular subsystem
  power: suspend - convert sysdev_class to a regular subsystem
  power: qe_ic - convert sysdev_class to a regular subsystem
  power: cmm - convert sysdev_class to a regular subsystem
  s390: time - convert sysdev_class to a regular subsystem
  ...

Fix up conflicts with 'struct sysdev' removal from various platform
drivers that got changed:
 - arch/arm/mach-exynos/cpu.c
 - arch/arm/mach-exynos/irq-eint.c
 - arch/arm/mach-s3c64xx/common.c
 - arch/arm/mach-s3c64xx/cpu.c
 - arch/arm/mach-s5p64x0/cpu.c
 - arch/arm/mach-s5pv210/common.c
 - arch/arm/plat-samsung/include/plat/cpu.h
 - arch/powerpc/kernel/sysfs.c
and fix up cpu_is_hotpluggable() as per Greg in include/linux/cpu.h

Make reiserfs properly display mount options in /proc/mounts.

CC: reiserfs-devel@vger.kernel.org
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

If there are any inodes on the super block that have been unlinked
(i_nlink == 0) but have not yet been deleted then prevent the
remounting the super block read-only.
Reported-by: NToshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Tested-by: NToshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add a new counter to the superblock that keeps track of unlinked but
not yet deleted inodes.

Do not WARN_ON if set_nlink is called with zero count, just do a
ratelimited printk.  This happens on xfs and probably other
filesystems after an unclean shutdown when the filesystem reads inodes
which already have zero i_nlink.  Reported by Christoph Hellwig.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Tested-by: NToshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Currently remouting superblock read-only is racy in a major way.

With the per mount read-only infrastructure it is now possible to
prevent most races, which this patch attempts.

Before starting the remount read-only, iterate through all mounts
belonging to the superblock and if none of them have any pending
writes, set sb->s_readonly_remount.  This indicates that remount is in
progress and no further write requests are allowed.  If the remount
succeeds set MS_RDONLY and reset s_readonly_remount.

If the remounting is unsuccessful just reset s_readonly_remount.
This can result in transient EROFS errors, despite the fact the
remount failed.  Unfortunately hodling off writes is difficult as
remount itself may touch the filesystem (e.g. through load_nls())
which would deadlock.

A later patch deals with delayed writes due to nlink going to zero.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Tested-by: NToshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Keep track of vfsmounts belonging to a superblock.  List is protected
by vfsmount_lock.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Tested-by: NToshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (21 commits)
  m68k/mac: Make CONFIG_HEARTBEAT unavailable on Mac
  m68k/serial: Remove references to obsolete serial config options
  m68k/net: Remove obsolete IRQ_FLG_* users
  m68k: Don't comment out syscalls used by glibc
  m68k/atari: Move declaration of atari_SCC_reset_done to header file
  m68k/serial: Remove references to obsolete CONFIG_SERIAL167
  m68k/hp300: Export hp300_ledstate
  m68k: Initconst section fixes
  m68k/mac: cleanup macro case
  mac_scsi: fix mac_scsi on some powerbooks
  m68k/mac: fix powerbook 150 adb_type
  m68k/mac: fix baboon irq disable and shutdown
  m68k/mac: oss irq fixes
  m68k/mac: fix nubus slot irq disable and shutdown
  m68k/mac: enable via_alt_mapping on performa 580
  m68k/mac: cleanup forward declarations
  m68k/mac: cleanup mac_irq_pending
  m68k/mac: cleanup mac_clear_irq
  m68k/mac: early console
  m68k/mvme16x: Add support for EARLY_PRINTK
  ...

Fix up trivial conflict in arch/m68k/Kconfig.debug due to new
EARLY_PRINTK config option addition clashing with movement of the
BOOTPARAM options.

* 'for-linus' of git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (207 commits)
  ARM: 7267/1: Remove BUILD_BUG_ON from asm/bug.h
  ARM: 7269/1: mach-sa1100: fix sched_clock breakage
  ARM: 7198/1: arm/imx6: add restart support for imx6q
  ARM: restart: remove the now empty arch_reset()
  ARM: restart: remove comments about adding code to arch_reset()
  ARM: restart: lpc32xx & u300: remove unnecessary printk
  ARM: restart: plat-samsung: remove plat/reset.h and s5p_reset_hook
  ARM: restart: w90x900: use new restart hook
  ARM: restart: Versatile Express: use new restart hook
  ARM: restart: versatile: use new restart hook
  ARM: restart: u300: use new restart hook
  ARM: restart: tegra: use new restart hook
  ARM: restart: spear: use new restart hook
  ARM: restart: shark: use new restart hook
  ARM: restart: sa1100: use new restart hook
  ARM: 7252/1: restart: S5PV210: use new restart hook
  ARM: 7251/1: restart: S5PC100: use new restart hook
  ARM: 7250/1: restart: S5P64X0: use new restart hook
  ARM: 7266/1: restart: S3C64XX: use new restart hook
  ARM: 7265/1: restart: S3C24XX: use new restart hook
  ...

Fix up trivial conflict in arch/arm/mm/init.c due to removal of
memblock_init() clashing with the movement of the sorting of the meminfo
array.

Merge branch 'amba-modalias' of git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm

* 'amba-modalias' of git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm:
  sound: aaci: Enable module alias autogeneration for AMBA drivers
  watchdog: sp805: Enable module alias autogeneration for AMBA drivers
  fbdev: amba: Enable module alias autogeneration for AMBA drivers
  serial: pl011: Enable module alias autogeneration for AMBA drivers
  serial: pl010: Enable module alias autogeneration for AMBA drivers
  spi: pl022: Enable module alias autogeneration for AMBA drivers
  rtc: pl031: Enable module alias autogeneration for AMBA drivers
  rtc: pl030: Enable module alias autogeneration for AMBA drivers
  mmc: mmci: Enable module alias autogeneration for AMBA drivers
  input: ambakmi: Enable module alias autogeneration for AMBA drivers
  gpio: pl061: Enable module alias autogeneration for AMBA drivers
  dmaengine: pl330: Enable module alias autogeneration for AMBA drivers
  dmaengine: pl08x: Enable module alias autogeneration for AMBA drivers
  hwrng: nomadik: Enable module alias autogeneration for AMBA drivers
  ARM: amba: Auto-generate AMBA driver module aliases during modpost
  ARM: amba: Move definition of struct amba_id to mod_devicetable.h