Move data-ready configuration in hts221_buffer.c since it is only related
to trigger logic
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@st.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Add open drain support in order to share requested IRQ line between
hts221 device and other peripherals
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

New driver adding support for ADC found on Cirrus Logic EP93xx series of SoCs.
Board specific code must take care to create plaform device with all necessary
resources.
Signed-off-by: NAlexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.
Signed-off-by: NRob Herring <robh@kernel.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Carlo Caione <carlo@caione.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: linux-iio@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

CHECK: Macro argument reuse 'addr' - possible side-effects?

convert AD7280A_DEVADDR to ad7280a_devaddr static function
to fix checkpath check

v3: small style changes
Signed-off-by: NJaya Durga <rjdurga@gmail.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Update hts221 device binding with active-low interrupts support
(IRQ_TYPE_LEVEL_LOW and IRQ_TYPE_EDGE_FALLING).
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Add support for active low interrupts (IRQF_TRIGGER_LOW and
IRQF_TRIGGER_FALLING). Configure the device as active high or low
according to the requested irq line.
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Configure sensor ODR just in hts221_write_raw() in order to avoid
to set device sample rate multiple times.
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

GENMASK(6, 3) in CTRL_REG1 and GENMASK(6, 2) in CTRL_REG2 are marked
reserved. Do not changed the original value (not declared in the
datasheet) during power-down/suspend routines.

Fixes: e4a70e3e (iio: humidity: add support to hts221 rh/temp device)
Fixes: b7079eea (iio: humidity: hts221: add power management support)
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Enable Block Data Update in hts221_probe() in order to avoid to reconfigure
it every time the sensor is enabled
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Move bit-shift in hts221_write_with_mask() instead of coding
the shift depth in the configured value. That change will be necessary
to fix an issue in device power-down procedure.
Simplify hts221_avg_list table management
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Add support for CCS811 VOC sensor. This patch adds support
for reading current and voltage across the sensor and TVOC
and equivalent CO2 values.

Scale and offset values have been computed according to datasheet:
    - For current: raw value is in microamps
        => 0.001 scale to convert to milliamps
    - For voltage: 1.65V = 1023, therefore 1650mV = 1023
        => 1650.0/1023 = 1.612903 scale to convert to millivolts
    - For eCO2: raw value range is from 400ppm to 8192ppm.
        => (val - 400) * (100 - 0) / (8192 - 400) + 0 =
           (val - 400) * 0.01283367 => offset: -400, scale = 0.012834
           to get a percentage value
    -For TVOC: raw value range is from 0ppb to 1187ppb.
        => (val - 0) * 100 / (1187 - 0) + 0 = val * 0.0842459 =>
            scale = 0.084246 for getting a percentage value

Cc: Daniel Baluta <daniel.baluta@gmail.com>
Cc: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: NNarcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Commit c43a102e ("iio: ina2xx: add support for TI INA2xx Power Monitors")
introduced the in_powerY_raw attribute, but omitted the corresponding
documentation.

The description is correct for the INA2xx and the MAX9611 IIO drivers.
Signed-off-by: NStefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

The gpiod API checks for NULL descriptors, so there is no need to
duplicate the check in the driver.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Drop static on a local variable, when the variable is initialized before
any possible use.  Thus, the static has no benefit.

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@bad exists@
position p;
identifier x;
type T;
@@
static T x@p;
...
x = <+...x...+>

@@
identifier x;
expression e;
type T;
position p != bad.p;
@@
-static
 T x@p;
 ... when != x
     when strict
?x = e;
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

When adding maps to the list, they were added using list_add, which adds
them in LIFO order. When parsing using iio_channel_get_all(), these
elements are hence returned in reverse order. As a result, the iio_hwmon
mapping maps the first entry to the last channel and so on.
Signed-off-by: NGaurav Gupta <gauragup@cisco.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

This adds support for STM32F4 Digital-To-Analog converter.
Add compatible configuration data to handle hfsel (not present
in stm32f4).
Signed-off-by: NFabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Fix error message, there's no 'st,dac-channel' property, but 'reg'
(see https://lkml.org/lkml/2017/4/3/567).
Signed-off-by: NFabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Introduce new compatible to support STM32F4 DAC (Digital-To-Analog
converter) variant.
Signed-off-by: NFabrice Gasnier <fabrice.gasnier@st.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Don't populate array startup_lookup on the stack but instead make
it static.  Makes the object code smaller.

Before:
   text	   data	    bss	    dec	    hex	filename
  21754	   5440	    128	  27322	   6aba	drivers/iio/adc/at91_adc.o

After:
   text	   data	    bss	    dec	    hex	filename
  21613	   5496	    128	  27237	   6a65	drivers/iio/adc/at91_adc.o
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

In order to use the standard name convention rename H3LIS331DL_DRIVER_NAME
macro in H3LIS331DL_ACCEL_DEV_NAME
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Add H3LIS331DL, LIS331DL and LIS3LV02DL entries in st_accel_id_table

Fixes: 1e52fefc (iio: accel: Add support for the h3lis331dl accel)
Fixes: bbf5f037 (iio: st_accel: support the LIS331DL sensor)
Fixes: 3acddf74 (iio: st-sensors: add support for lis3lv02d accel)
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Making the const array startup_lookup static rather having it on the
stack saves 69 bytes. Add in missing int specifier to clean up a
checkpatch warning.

Before:
   text	   data	    bss	    dec	    hex	filename
  10297	   2800	    128	  13225	   33a9	drivers/iio/adc/at91-sama5d2_adc.o

After:
   text	   data	    bss	    dec	    hex	filename
  10140	   2888	    128	  13156	   3364	drivers/iio/adc/at91-sama5d2_adc.o
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Making the const array init_data static rather having it on the
stack saves us a couple hundreds of bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
   3175	    848	      0	   4023	    fb7	drivers/iio/accel/da311.o

After:
   text	   data	    bss	    dec	    hex	filename
   2860	    936	      0	   3796	    ed4	drivers/iio/accel/da311.o
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Check return value from call to of_match_device()
in order to prevent a NULL pointer dereference.

In case of NULL print error message and return -ENODEV
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Check return value from call to of_match_device()
in order to prevent a NULL pointer dereference.

In case of NULL print error message and return -ENODEV
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

The return value from tsl2x7x_invoke_change() was not checked in most
places in the driver. This patch adds the proper error checks. The
return values inside tsl2x7x_invoke_change() are now checked by
this patch as well.

Previously, if there was an error turning the chip back on, then the
driver would attempt to turn the chip off and incorrectly return
success. The code to power off the chip is removed by this patch
since we should fail fast.
Signed-off-by: NBrian Masney <masneyb@onstation.org>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

This driver in some cases can busy wait for upwards of 15ms. Since the
kernel at this point is not running in atomic context, and is running in
process context, we can safely use usleep_range() instead. This patch
changes the two occurrences of mdelay() to usleep_range().
Signed-off-by: NBrian Masney <masneyb@onstation.org>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

tsl2x7x_read_thresh() and tsl2x7x_write_thresh() currently assumes
that IIO_EV_INFO_VALUE is the only iio_event_info that will be
passed in.  This patch refactors these two functions so that
additional iio_event_infos can be passed in. The functions are
renamed from tsl2x7x_{read,write}_thresh() to
tsl2x7x_{read,write}_event_value(). This patch also adds the
missing return value check to tsl2x7x_invoke_change() since this
was previously missing. This patch is in preparation for moving
the in_intensity0_thresh_period and in_proximity0_thresh_period sysfs
attributes to be created by iio_event_spec.
Signed-off-by: NBrian Masney <masneyb@onstation.org>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

The calibration function calls i2c_smbus_write_byte() and
i2c_smbus_read_byte(). These two function calls are replaced with a
single call to i2c_smbus_read_byte_data() by this patch. This patch
also removes an unnecessary call that reads the CNTRL register
a second time. One of the error paths returned -1 if the ADC was not
enabled and this patch changes that return value to -EINVAL.
Signed-off-by: NBrian Masney <masneyb@onstation.org>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

tsl2x7x_i2c_read() would call i2c_smbus_write_byte() and
i2c_smbus_read_byte(). These two i2c functions can be replaced with a
single call to i2c_smbus_read_byte_data(). This patch removes the
tsl2x7x_i2c_read() function and replaces all occurrences with a call to
i2c_smbus_read_byte_data().
Signed-off-by: NBrian Masney <masneyb@onstation.org>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

The TSL2X7X driver has a custom power_state sysfs attribute. Remove this
attribute since the runtime power management code provides a sysfs
attribute to control the power state of the device.
Signed-off-by: NBrian Masney <masneyb@onstation.org>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Add device tree support for the tsl2x7x IIO driver with no custom
properties. The device tree documentation is in a separate commit so
that the changes to trivial-devices.txt can go in via the device
tree subsystem.
Signed-off-by: NBrian Masney <masneyb@onstation.org>
CC: Rob Herring <robh+dt@kernel.org>
CC: Mark Rutland <mark.rutland@arm.com>
CC: devicetree@vger.kernel.org
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

This patch adds support for Diolan DLN2 ADC via IIO's ADC interface.
ADC is the fourth and final component of the DLN2 for the kernel.
Signed-off-by: NJack Andersen <jackoalan@gmail.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

Add newlines to the macro definitions and use a more common style.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The LTC2741 and LTC2473 are single voltage ADC chips. The LTC2473
is similar to the LTC2471 but outputs a signed differential value.

Datasheet:
  http://cds.linear.com/docs/en/datasheet/24713fb.pdfSigned-off-by: NMike Looijmans <mike.looijmans@topic.nl>
Reviewed-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Set up and use triggered buffer if there is irq defined for device in
device tree. Trigger producer triggers from rpr0521 drdy interrupt line.
Trigger consumer reads rpr0521 data to scan buffer.
Depends on previous commits of _scale and _offset.
Signed-off-by: NMikko Koivunen <mikko.koivunen@fi.rohmeurope.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>