The pti_clone_kernel_text() function references __end_rodata_hpage_align,
which is only present on x86-64.  This makes sense as the end of the rodata
section is not huge-page aligned on 32 bit.

Nevertheless a symbol is required for the function that points at the right
address for both 32 and 64 bit. Introduce __end_rodata_aligned for that
purpose and use it in pti_clone_kernel_text().
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NPavel Machek <pavel@ucw.cz>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: linux-mm@kvack.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: aliguori@amazon.com
Cc: daniel.gruss@iaik.tugraz.at
Cc: hughd@google.com
Cc: keescook@google.com
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Waiman Long <llong@redhat.com>
Cc: "David H . Gutteridge" <dhgutteridge@sympatico.ca>
Cc: joro@8bytes.org
Link: https://lkml.kernel.org/r/1531906876-13451-28-git-send-email-joro@8bytes.org

Allocate a kernel and a user page-table root when PTI is enabled. Also
allocate a full page per root for PAE because otherwise the bit to flip in
CR3 to switch between them would be non-constant, which creates a lot of
hassle.  Keep that for a later optimization.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NPavel Machek <pavel@ucw.cz>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: linux-mm@kvack.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: aliguori@amazon.com
Cc: daniel.gruss@iaik.tugraz.at
Cc: hughd@google.com
Cc: keescook@google.com
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Waiman Long <llong@redhat.com>
Cc: "David H . Gutteridge" <dhgutteridge@sympatico.ca>
Cc: joro@8bytes.org
Link: https://lkml.kernel.org/r/1531906876-13451-18-git-send-email-joro@8bytes.org

The function does not update sp0 anymore but updates makes the task-stack
visible for entry code. This is by either writing it to sp1 or by doing a
hypercall. Rename the function to get rid of the misleading name.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NPavel Machek <pavel@ucw.cz>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: linux-mm@kvack.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: aliguori@amazon.com
Cc: daniel.gruss@iaik.tugraz.at
Cc: hughd@google.com
Cc: keescook@google.com
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Waiman Long <llong@redhat.com>
Cc: "David H . Gutteridge" <dhgutteridge@sympatico.ca>
Cc: joro@8bytes.org
Link: https://lkml.kernel.org/r/1531906876-13451-15-git-send-email-joro@8bytes.org

Use the entry-stack as a trampoline to enter the kernel. The entry-stack is
already in the cpu_entry_area and will be mapped to userspace when PTI is
enabled.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NPavel Machek <pavel@ucw.cz>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: linux-mm@kvack.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: aliguori@amazon.com
Cc: daniel.gruss@iaik.tugraz.at
Cc: hughd@google.com
Cc: keescook@google.com
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Waiman Long <llong@redhat.com>
Cc: "David H . Gutteridge" <dhgutteridge@sympatico.ca>
Cc: joro@8bytes.org
Link: https://lkml.kernel.org/r/1531906876-13451-8-git-send-email-joro@8bytes.org

x86_tss.sp0 will be used to point to the entry stack later to use it as a
trampoline stack for other kernel entry points besides SYSENTER.

So store the real task stack pointer in x86_tss.sp1, which is otherwise
unused by the hardware, as Linux doesn't make use of Ring 1.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NPavel Machek <pavel@ucw.cz>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: linux-mm@kvack.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: aliguori@amazon.com
Cc: daniel.gruss@iaik.tugraz.at
Cc: hughd@google.com
Cc: keescook@google.com
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Waiman Long <llong@redhat.com>
Cc: "David H . Gutteridge" <dhgutteridge@sympatico.ca>
Cc: joro@8bytes.org
Link: https://lkml.kernel.org/r/1531906876-13451-4-git-send-email-joro@8bytes.org

The stack address doesn't need to be stored in tss.sp0 if the stack is
switched manually like on sysenter. Rename the offset so that it still
makes sense when its location is changed in later patches.

This stackk will also be used for all kernel-entry points, not just
sysenter. Reflect that and the fact that it is the offset to the task-stack
location in the name as well.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NPavel Machek <pavel@ucw.cz>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: linux-mm@kvack.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: aliguori@amazon.com
Cc: daniel.gruss@iaik.tugraz.at
Cc: hughd@google.com
Cc: keescook@google.com
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Waiman Long <llong@redhat.com>
Cc: "David H . Gutteridge" <dhgutteridge@sympatico.ca>
Cc: joro@8bytes.org
Link: https://lkml.kernel.org/r/1531906876-13451-3-git-send-email-joro@8bytes.org

These offsets will be used in 32 bit assembly code as well, so make them
available for all of x86 code.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NPavel Machek <pavel@ucw.cz>
Reviewed-by: NAndy Lutomirski <luto@kernel.org>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: linux-mm@kvack.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eduardo Valentin <eduval@amazon.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: aliguori@amazon.com
Cc: daniel.gruss@iaik.tugraz.at
Cc: hughd@google.com
Cc: keescook@google.com
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Waiman Long <llong@redhat.com>
Cc: "David H . Gutteridge" <dhgutteridge@sympatico.ca>
Cc: joro@8bytes.org
Link: https://lkml.kernel.org/r/1531906876-13451-2-git-send-email-joro@8bytes.org

APM_DO_POP_SEGS does not restore fs/gs which were zeroed by
APM_DO_ZERO_SEGS. Trying to access __preempt_count with
zeroed fs doesn't really work.

Move the ibrs call outside the APM_DO_SAVE_SEGS/APM_DO_RESTORE_SEGS
invocations so that fs is actually restored before calling
preempt_enable().

Fixes the following sort of oopses:
[    0.313581] general protection fault: 0000 [#1] PREEMPT SMP
[    0.313803] Modules linked in:
[    0.314040] CPU: 0 PID: 268 Comm: kapmd Not tainted 4.16.0-rc1-triton-bisect-00090-gdd84441a #19
[    0.316161] EIP: __apm_bios_call_simple+0xc8/0x170
[    0.316161] EFLAGS: 00210016 CPU: 0
[    0.316161] EAX: 00000102 EBX: 00000000 ECX: 00000102 EDX: 00000000
[    0.316161] ESI: 0000530e EDI: dea95f64 EBP: dea95f18 ESP: dea95ef0
[    0.316161]  DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[    0.316161] CR0: 80050033 CR2: 00000000 CR3: 015d3000 CR4: 000006d0
[    0.316161] Call Trace:
[    0.316161]  ? cpumask_weight.constprop.15+0x20/0x20
[    0.316161]  on_cpu0+0x44/0x70
[    0.316161]  apm+0x54e/0x720
[    0.316161]  ? __switch_to_asm+0x26/0x40
[    0.316161]  ? __schedule+0x17d/0x590
[    0.316161]  kthread+0xc0/0xf0
[    0.316161]  ? proc_apm_show+0x150/0x150
[    0.316161]  ? kthread_create_worker_on_cpu+0x20/0x20
[    0.316161]  ret_from_fork+0x2e/0x38
[    0.316161] Code: da 8e c2 8e e2 8e ea 57 55 2e ff 1d e0 bb 5d b1 0f 92 c3 5d 5f 07 1f 89 47 0c 90 8d b4 26 00 00 00 00 90 8d b4 26 00 00 00 00 90 <64> ff 0d 84 16 5c b1 74 7f 8b 45 dc 8e e0 8b 45 d8 8e e8 8b 45
[    0.316161] EIP: __apm_bios_call_simple+0xc8/0x170 SS:ESP: 0068:dea95ef0
[    0.316161] ---[ end trace 656253db2deaa12c ]---

Fixes: dd84441a ("x86/speculation: Use IBRS if available before calling into firmware")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Cc:  David Woodhouse <dwmw@amazon.co.uk>
Cc:  "H. Peter Anvin" <hpa@zytor.com>
Cc:  x86@kernel.org
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20180709133534.5963-1-ville.syrjala@linux.intel.com

Don't access the provided buffer out of bounds - this can cause a kernel
out-of-bounds read when invoked through sys_splice() or other things that
use kernel_write()/__kernel_write().

Fixes: 7f8ec5a4 ("x86/mtrr: Convert to use strncpy_from_user() helper")
Signed-off-by: NJann Horn <jannh@google.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180706215003.156702-1-jannh@google.com

native_save_fl() is marked static inline, but by using it as
a function pointer in arch/x86/kernel/paravirt.c, it MUST be outlined.

paravirt's use of native_save_fl() also requires that no GPRs other than
%rax are clobbered.

Compilers have different heuristics which they use to emit stack guard
code, the emittance of which can break paravirt's callee saved assumption
by clobbering %rcx.

Marking a function definition extern inline means that if this version
cannot be inlined, then the out-of-line version will be preferred. By
having the out-of-line version be implemented in assembly, it cannot be
instrumented with a stack protector, which might violate custom calling
conventions that code like paravirt rely on.

The semantics of extern inline has changed since gnu89. This means that
folks using GCC versions >= 5.1 may see symbol redefinition errors at
link time for subdirs that override KBUILD_CFLAGS (making the C standard
used implicit) regardless of this patch. This has been cleaned up
earlier in the patch set, but is left as a note in the commit message
for future travelers.

Reports:
 https://lkml.org/lkml/2018/5/7/534
 https://github.com/ClangBuiltLinux/linux/issues/16

Discussion:
 https://bugs.llvm.org/show_bug.cgi?id=37512
 https://lkml.org/lkml/2018/5/24/1371

Thanks to the many folks that participated in the discussion.
Debugged-by: NAlistair Strachan <astrachan@google.com>
Debugged-by: NMatthias Kaehlcke <mka@chromium.org>
Suggested-by: NArnd Bergmann <arnd@arndb.de>
Suggested-by: NH. Peter Anvin <hpa@zytor.com>
Suggested-by: NTom Stellar <tstellar@redhat.com>
Reported-by: NSedat Dilek <sedat.dilek@gmail.com>
Tested-by: NSedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: NNick Desaulniers <ndesaulniers@google.com>
Acked-by: NJuergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@redhat.com
Cc: akataria@vmware.com
Cc: akpm@linux-foundation.org
Cc: andrea.parri@amarulasolutions.com
Cc: ard.biesheuvel@linaro.org
Cc: aryabinin@virtuozzo.com
Cc: astrachan@google.com
Cc: boris.ostrovsky@oracle.com
Cc: brijesh.singh@amd.com
Cc: caoj.fnst@cn.fujitsu.com
Cc: geert@linux-m68k.org
Cc: ghackmann@google.com
Cc: gregkh@linuxfoundation.org
Cc: jan.kiszka@siemens.com
Cc: jarkko.sakkinen@linux.intel.com
Cc: joe@perches.com
Cc: jpoimboe@redhat.com
Cc: keescook@google.com
Cc: kirill.shutemov@linux.intel.com
Cc: kstewart@linuxfoundation.org
Cc: linux-efi@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Cc: manojgupta@google.com
Cc: mawilcox@microsoft.com
Cc: michal.lkml@markovi.net
Cc: mjg59@google.com
Cc: mka@chromium.org
Cc: pombredanne@nexb.com
Cc: rientjes@google.com
Cc: rostedt@goodmis.org
Cc: thomas.lendacky@amd.com
Cc: tweek@google.com
Cc: virtualization@lists.linux-foundation.org
Cc: will.deacon@arm.com
Cc: yamada.masahiro@socionext.com
Link: http://lkml.kernel.org/r/20180621162324.36656-4-ndesaulniers@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

On AMD, the presence of the MSR_SPEC_CTRL feature does not imply that the
SSBD mitigation support should use the SPEC_CTRL MSR. Other features could
have caused the MSR_SPEC_CTRL feature to be set, while a different SSBD
mitigation option is in place.

Update the SSBD support to check for the actual SSBD features that will
use the SPEC_CTRL MSR.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 6ac2f49e ("x86/bugs: Add AMD's SPEC_CTRL MSR usage")
Link: http://lkml.kernel.org/r/20180702213602.29202.33151.stgit@tlendack-t1.amdoffice.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

If either the X86_FEATURE_AMD_SSBD or X86_FEATURE_VIRT_SSBD features are
present, then there is no need to perform the check for the LS_CFG SSBD
mitigation support.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180702213553.29202.21089.stgit@tlendack-t1.amdoffice.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

On 32-bit kernels, __flush_tlb_all() may have read the CR4 shadow before the
initialization of CR4 shadow in cpu_init().

Fix it by adding an explicit cr4_init_shadow() call into start_secondary()
which is the first function called on non-boot SMP CPUs - ahead of the
__flush_tlb_all() call.

( This is somewhat of a layering violation, but start_secondary() does
  CR4 bootstrap in the PCID case anyway. )
Signed-off-by: NZhenzhong Duan <zhenzhong.duan@oracle.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: http://lkml.kernel.org/r/b07b6ae9-4b57-4b40-b9bc-50c2c67f1d91@defaultSigned-off-by: NIngo Molnar <mingo@kernel.org>

There is a kernel panic that is triggered when reading /proc/kpageflags
on the kernel booted with kernel parameter 'memmap=nn[KMG]!ss[KMG]':

  BUG: unable to handle kernel paging request at fffffffffffffffe
  PGD 9b20e067 P4D 9b20e067 PUD 9b210067 PMD 0
  Oops: 0000 [#1] SMP PTI
  CPU: 2 PID: 1728 Comm: page-types Not tainted 4.17.0-rc6-mm1-v4.17-rc6-180605-0816-00236-g2dfb086ef02c+ #160
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.fc28 04/01/2014
  RIP: 0010:stable_page_flags+0x27/0x3c0
  Code: 00 00 00 0f 1f 44 00 00 48 85 ff 0f 84 a0 03 00 00 41 54 55 49 89 fc 53 48 8b 57 08 48 8b 2f 48 8d 42 ff 83 e2 01 48 0f 44 c7 <48> 8b 00 f6 c4 01 0f 84 10 03 00 00 31 db 49 8b 54 24 08 4c 89 e7
  RSP: 0018:ffffbbd44111fde0 EFLAGS: 00010202
  RAX: fffffffffffffffe RBX: 00007fffffffeff9 RCX: 0000000000000000
  RDX: 0000000000000001 RSI: 0000000000000202 RDI: ffffed1182fff5c0
  RBP: ffffffffffffffff R08: 0000000000000001 R09: 0000000000000001
  R10: ffffbbd44111fed8 R11: 0000000000000000 R12: ffffed1182fff5c0
  R13: 00000000000bffd7 R14: 0000000002fff5c0 R15: ffffbbd44111ff10
  FS:  00007efc4335a500(0000) GS:ffff93a5bfc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: fffffffffffffffe CR3: 00000000b2a58000 CR4: 00000000001406e0
  Call Trace:
   kpageflags_read+0xc7/0x120
   proc_reg_read+0x3c/0x60
   __vfs_read+0x36/0x170
   vfs_read+0x89/0x130
   ksys_pread64+0x71/0x90
   do_syscall_64+0x5b/0x160
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7efc42e75e23
  Code: 09 00 ba 9f 01 00 00 e8 ab 81 f4 ff 66 2e 0f 1f 84 00 00 00 00 00 90 83 3d 29 0a 2d 00 00 75 13 49 89 ca b8 11 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 db d3 01 00 48 89 04 24

According to kernel bisection, this problem became visible due to commit
f7f99100 ("mm: stop zeroing memory during allocation in vmemmap")
which changes how struct pages are initialized.

Memblock layout affects the pfn ranges covered by node/zone.  Consider
that we have a VM with 2 NUMA nodes and each node has 4GB memory, and
the default (no memmap= given) memblock layout is like below:

  MEMBLOCK configuration:
   memory size = 0x00000001fff75c00 reserved size = 0x000000000300c000
   memory.cnt  = 0x4
   memory[0x0]     [0x0000000000001000-0x000000000009efff], 0x000000000009e000 bytes on node 0 flags: 0x0
   memory[0x1]     [0x0000000000100000-0x00000000bffd6fff], 0x00000000bfed7000 bytes on node 0 flags: 0x0
   memory[0x2]     [0x0000000100000000-0x000000013fffffff], 0x0000000040000000 bytes on node 0 flags: 0x0
   memory[0x3]     [0x0000000140000000-0x000000023fffffff], 0x0000000100000000 bytes on node 1 flags: 0x0
   ...

If you give memmap=1G!4G (so it just covers memory[0x2]),
the range [0x100000000-0x13fffffff] is gone:

  MEMBLOCK configuration:
   memory size = 0x00000001bff75c00 reserved size = 0x000000000300c000
   memory.cnt  = 0x3
   memory[0x0]     [0x0000000000001000-0x000000000009efff], 0x000000000009e000 bytes on node 0 flags: 0x0
   memory[0x1]     [0x0000000000100000-0x00000000bffd6fff], 0x00000000bfed7000 bytes on node 0 flags: 0x0
   memory[0x2]     [0x0000000140000000-0x000000023fffffff], 0x0000000100000000 bytes on node 1 flags: 0x0
   ...

This causes shrinking node 0's pfn range because it is calculated by the
address range of memblock.memory.  So some of struct pages in the gap
range are left uninitialized.

We have a function zero_resv_unavail() which does zeroing the struct pages
within the reserved unavailable range (i.e.  memblock.memory &&
!memblock.reserved).  This patch utilizes it to cover all unavailable
ranges by putting them into memblock.reserved.

Link: http://lkml.kernel.org/r/20180615072947.GB23273@hori1.linux.bs1.fc.nec.co.jp
Fixes: f7f99100 ("mm: stop zeroing memory during allocation in vmemmap")
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Tested-by: NOscar Salvador <osalvador@suse.de>
Tested-by: N"Herton R. Krzesinski" <herton@redhat.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NPavel Tatashin <pasha.tatashin@oracle.com>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

early_identify_cpu() has to use early version of pgtable_l5_enabled()
that doesn't rely on cpu_feature_enabled().

Defining USE_EARLY_PGTABLE_L5 before all includes does the trick.

I lost the define in one of reworks of the original patch.

Fixes: 372fddf7 ("x86/mm: Introduce the 'no5lvl' kernel parameter")
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20180622220841.54135-3-kirill.shutemov@linux.intel.com

This reverts commit e4e961e3.

We need to use early version of pgtable_l5_enabled() in
early_identify_cpu() as this code runs before cpu_feature_enabled() is
usable.

But it leads to section mismatch:

cpu_init()
  load_mm_ldt()
    ldt_slot_va()
      LDT_BASE_ADDR
        LDT_PGD_ENTRY
	  pgtable_l5_enabled()
	    __pgtable_l5_enabled

__pgtable_l5_enabled marked as __initdata, but cpu_init() is not __init.

It's fixable: early code can be isolated into a separate translation unit,
but such change collides with other work in the area.  That's too much
hassle to save 4 bytes of memory.

Return __pgtable_l5_enabled back to be __ro_after_init.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20180622220841.54135-2-kirill.shutemov@linux.intel.com

The current logic incorrectly calculates the LLC ID from the APIC ID.

Unless specified otherwise, the LLC ID should be calculated by removing
the Core and Thread ID bits from the least significant end of the APIC
ID. For more info, see "ApicId Enumeration Requirements" in any Fam17h
PPR document.

[ bp: Improve commit message. ]

Fixes: 68091ee7 ("Calculate last level cache ID from number of sharing threads")
Signed-off-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1528915390-30533-1-git-send-email-suravee.suthikulpanit@amd.com

When delivering a signal to a task that is using rseq, we call into
__rseq_handle_notify_resume() so that the registers pushed in the
sigframe are updated to reflect the state of the restartable sequence
(for example, ensuring that the signal returns to the abort handler if
necessary).

However, if the rseq management fails due to an unrecoverable fault when
accessing userspace or certain combinations of RSEQ_CS_* flags, then we
will attempt to deliver a SIGSEGV. This has the potential for infinite
recursion if the rseq code continuously fails on signal delivery.

Avoid this problem by using force_sigsegv() instead of force_sig(), which
is explicitly designed to reset the SEGV handler to SIG_DFL in the case
of a recursive fault. In doing so, remove rseq_signal_deliver() from the
internal rseq API and have an optional struct ksignal * parameter to
rseq_handle_notify_resume() instead.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: peterz@infradead.org
Cc: paulmck@linux.vnet.ibm.com
Cc: boqun.feng@gmail.com
Link: https://lkml.kernel.org/r/1529664307-983-1-git-send-email-will.deacon@arm.com

Free useless ucode_patch entry when it's replaced.

[ bp: Drop the memfree_patch() two-liner. ]
Signed-off-by: NZhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Srinivas REDDY Eeda <srinivas.eeda@oracle.com>
Link: http://lkml.kernel.org/r/888102f0-fd22-459d-b090-a1bd8a00cb2b@default

Some injection testing resulted in the following console log:

  mce: [Hardware Error]: CPU 22: Machine Check Exception: f Bank 1: bd80000000100134
  mce: [Hardware Error]: RIP 10:<ffffffffc05292dd> {pmem_do_bvec+0x11d/0x330 [nd_pmem]}
  mce: [Hardware Error]: TSC c51a63035d52 ADDR 3234bc4000 MISC 88
  mce: [Hardware Error]: PROCESSOR 0:50654 TIME 1526502199 SOCKET 0 APIC 38 microcode 2000043
  mce: [Hardware Error]: Run the above through 'mcelog --ascii'
  Kernel panic - not syncing: Machine check from unknown source

This confused everybody because the first line quite clearly shows
that we found a logged error in "Bank 1", while the last line says
"unknown source".

The problem is that the Linux code doesn't do the right thing
for a local machine check that results in a fatal error.

It turns out that we know very early in the handler whether the
machine check is fatal. The call to mce_no_way_out() has checked
all the banks for the CPU that took the local machine check. If
it says we must crash, we can do so right away with the right
messages.

We do scan all the banks again. This means that we might initially
not see a problem, but during the second scan find something fatal.
If this happens we print a slightly different message (so I can
see if it actually every happens).

[ bp: Remove unneeded severity assignment. ]
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: stable@vger.kernel.org # 4.2
Link: http://lkml.kernel.org/r/52e049a497e86fd0b71c529651def8871c804df0.1527283897.git.tony.luck@intel.com

mce_no_way_out() does a quick check during #MC to see whether some of
the MCEs logged would require the kernel to panic immediately. And it
passes a struct mce where MCi_STATUS gets written.

However, after having saved a valid status value, the next iteration
of the loop which goes over the MCA banks on the CPU, overwrites the
valid status value because we're using struct mce as storage instead of
a temporary variable.

Which leads to MCE records with an empty status value:

  mce: [Hardware Error]: CPU 0: Machine Check Exception: 6 Bank 0: 0000000000000000
  mce: [Hardware Error]: RIP 10:<ffffffffbd42fbd7> {trigger_mce+0x7/0x10}

In order to prevent the loss of the status register value, return
immediately when severity is a panic one so that we can panic
immediately with the first fatal MCE logged. This is also the intention
of this function and not to noodle over the banks while a fatal MCE is
already logged.

Tony: read the rest of the MCA bank to populate the struct mce fully.
Suggested-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20180622095428.626-8-bp@alien8.de

insn_get_length() has the side-effect of processing the entire instruction
but only if it was decoded successfully, otherwise insn_complete() can fail
and in this case we need to just return an error without warning.

Reported-by: syzbot+30d675e3ca03c1c351e7@syzkaller.appspotmail.com
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: NMasami Hiramatsu <mhiramat@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: syzkaller-bugs@googlegroups.com
Link: https://lkml.kernel.org/lkml/20180518162739.GA5559@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Add a kernel parameter that allows setting UV memory block size.  This
is to provide an adjustment for new forms of PMEM and other DIMM memory
that might require alignment restrictions other than scanning the global
address table for the required minimum alignment.  The value set will be
further adjusted by both the GAM range table scan as well as restrictions
imposed by set_memory_block_size_order().
Signed-off-by: NMike Travis <mike.travis@hpe.com>
Reviewed-by: NAndrew Banman <andrew.banman@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dan.j.williams@intel.com
Cc: jgross@suse.com
Cc: kirill.shutemov@linux.intel.com
Cc: mhocko@suse.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/lkml/20180524201711.854849120@stormcage.americas.sgi.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Add a call to the new function to "adjust" the current fixed UV memory
block size of 2GB so it can be changed to a different physical boundary.
This accommodates changes in the Intel BIOS, and therefore UV BIOS,
which now can align boundaries different than the previous UV standard
of 2GB.  It also flags any UV Global Address boundaries from BIOS that
cause a change in the mem block size (boundary).

The current boundary of 2GB has been used on UV since the first system
release in 2009 with Linux 2.6 and has worked fine.  But the new NVDIMM
persistent memory modules (PMEM), along with the Intel BIOS changes to
support these modules caused the memory block size boundary to be set
to a lower limit.  Intel only guarantees that this minimum boundary at
64MB though the current Linux limit is 128MB.

Note that the default remains 2GB if no changes occur.
Signed-off-by: NMike Travis <mike.travis@hpe.com>
Reviewed-by: NAndrew Banman <andrew.banman@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dan.j.williams@intel.com
Cc: jgross@suse.com
Cc: kirill.shutemov@linux.intel.com
Cc: mhocko@suse.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/lkml/20180524201711.732785782@stormcage.americas.sgi.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Xen PV domain kernel is not by design affected by meltdown as it's
enforcing split CR3 itself. Let's not report such systems as "Vulnerable"
in sysfs (we're also already forcing PTI to off in X86_HYPER_XEN_PV cases);
the security of the system ultimately depends on presence of mitigation in
the Hypervisor, which can't be easily detected from DomU; let's report
that.
Reported-and-tested-by: NMike Latimer <mlatimer@suse.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NJuergen Gross <jgross@suse.com>
Cc: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/nycvar.YFH.7.76.1806180959080.6203@cbobk.fhfr.pm
[ Merge the user-visible string into a single line. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

fpu__drop() has an explicit fwait which under some conditions can trigger a
fixable FPU exception while in kernel. Thus, we should attempt to fixup the
exception first, and only call notify_die() if the fixup failed just like
in do_general_protection(). The original call sequence incorrectly triggers
KDB entry on debug kernels under particular FPU-intensive workloads.

Andy noted, that this makes the whole conditional irq enable thing even
more inconsistent, but fixing that it outside the scope of this.
Signed-off-by: NSiarhei Liakh <siarhei.liakh@concurrent-rt.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NAndy Lutomirski <luto@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Borislav  Petkov" <bpetkov@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/DM5PR11MB201156F1CAB2592B07C79A03B17D0@DM5PR11MB2011.namprd11.prod.outlook.com

The changes to automatically test for working stack protector compiler
support in the Kconfig files removed the special STACKPROTECTOR_AUTO
option that picked the strongest stack protector that the compiler
supported.

That was all a nice cleanup - it makes no sense to have the AUTO case
now that the Kconfig phase can just determine the compiler support
directly.

HOWEVER.

It also meant that doing "make oldconfig" would now _disable_ the strong
stackprotector if you had AUTO enabled, because in a legacy config file,
the sane stack protector configuration would look like

  CONFIG_HAVE_CC_STACKPROTECTOR=y
  # CONFIG_CC_STACKPROTECTOR_NONE is not set
  # CONFIG_CC_STACKPROTECTOR_REGULAR is not set
  # CONFIG_CC_STACKPROTECTOR_STRONG is not set
  CONFIG_CC_STACKPROTECTOR_AUTO=y

and when you ran this through "make oldconfig" with the Kbuild changes,
it would ask you about the regular CONFIG_CC_STACKPROTECTOR (that had
been renamed from CONFIG_CC_STACKPROTECTOR_REGULAR to just
CONFIG_CC_STACKPROTECTOR), but it would think that the STRONG version
used to be disabled (because it was really enabled by AUTO), and would
disable it in the new config, resulting in:

  CONFIG_HAVE_CC_STACKPROTECTOR=y
  CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
  CONFIG_CC_STACKPROTECTOR=y
  # CONFIG_CC_STACKPROTECTOR_STRONG is not set
  CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

That's dangerously subtle - people could suddenly find themselves with
the weaker stack protector setup without even realizing.

The solution here is to just rename not just the old RECULAR stack
protector option, but also the strong one.  This does that by just
removing the CC_ prefix entirely for the user choices, because it really
is not about the compiler support (the compiler support now instead
automatially impacts _visibility_ of the options to users).

This results in "make oldconfig" actually asking the user for their
choice, so that we don't have any silent subtle security model changes.
The end result would generally look like this:

  CONFIG_HAVE_CC_STACKPROTECTOR=y
  CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
  CONFIG_STACKPROTECTOR=y
  CONFIG_STACKPROTECTOR_STRONG=y
  CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

where the "CC_" versions really are about internal compiler
infrastructure, not the user selections.
Acked-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The kzalloc() function has a 2-factor argument form, kcalloc(). This
patch replaces cases of:

        kzalloc(a * b, gfp)

with:
        kcalloc(a * b, gfp)

as well as handling cases of:

        kzalloc(a * b * c, gfp)

with:

        kzalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kzalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kzalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kzalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kzalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kzalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kzalloc
+ kcalloc
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kzalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kzalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kzalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kzalloc(sizeof(THING) * C2, ...)
|
  kzalloc(sizeof(TYPE) * C2, ...)
|
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(C1 * C2, ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	E1 * E2
+	E1, E2
  , ...)
)
Signed-off-by: NKees Cook <keescook@chromium.org>

The kmalloc() function has a 2-factor argument form, kmalloc_array(). This
patch replaces cases of:

        kmalloc(a * b, gfp)

with:
        kmalloc_array(a * b, gfp)

as well as handling cases of:

        kmalloc(a * b * c, gfp)

with:

        kmalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kmalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kmalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The tools/ directory was manually excluded, since it has its own
implementation of kmalloc().

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kmalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kmalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kmalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kmalloc
+ kmalloc_array
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kmalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kmalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kmalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kmalloc(sizeof(THING) * C2, ...)
|
  kmalloc(sizeof(TYPE) * C2, ...)
|
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(C1 * C2, ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	E1 * E2
+	E1, E2
  , ...)
)
Signed-off-by: NKees Cook <keescook@chromium.org>

New stepping of Skylake has fixes for cache occupancy and memory
bandwidth monitoring.

Update the code to enable these by default on newer steppings.
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: stable@vger.kernel.org # v4.14
Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Link: https://lkml.kernel.org/r/20180608160732.9842-1-tony.luck@intel.com

Currently we just check the "CAPID0" register to see whether the CPU
can recover from machine checks.

But there are also some special SKUs which do not have all advanced
RAS features, but do enable machine check recovery for use with NVDIMMs.

Add a check for any of bits {8:5} in the "CAPID5" register (each
reports some NVDIMM mode available, if any of them are set, then
the system supports memory machine check recovery).
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: stable@vger.kernel.org # 4.9
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/03cbed6e99ddafb51c2eadf9a3b7c8d7a0cc204e.1527283897.git.tony.luck@intel.com

Since we added support to add recovery from some errors inside the kernel in:

commit b2f9d678 ("x86/mce: Check for faults tagged in EXTABLE_CLASS_FAULT exception table entries")

we have done a less than stellar job at reporting the cause of recoverable
machine checks that occur in other parts of the kernel. The user just gets
the unhelpful message:

	mce: [Hardware Error]: Machine check: Action required: unknown MCACOD

doubly unhelpful when they check the manual for the reported IA32_MSR_STATUS.MCACOD
and see that it is listed as one of the standard recoverable values.

Add an extra rule to the MCE severity table to catch this case and report it
as:

	mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel

Fixes: b2f9d678 ("x86/mce: Check for faults tagged in EXTABLE_CLASS_FAULT exception table entries")
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: stable@vger.kernel.org # 4.6+
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/4cc7c465150a9a48b8b9f45d0b840278e77eb9b5.1527283897.git.tony.luck@intel.com

Extend the debugability of the vector management by adding the state bits
to the debugfs output.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NSong Liu <songliubraving@fb.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <liu.song.a23@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tariq Toukan <tariqt@mellanox.com>
Link: https://lkml.kernel.org/r/20180604162224.908136099@linutronix.de

To address the EBUSY fail of interrupt affinity settings in case that the
previous setting has not been cleaned up yet, use the new apic_ack_irq()
function instead of directly invoking ack_APIC_irq().

Preparatory change for the real fix

Fixes: dccfe314 ("x86/vector: Simplify vector move cleanup")
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NSong Liu <songliubraving@fb.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <liu.song.a23@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: stable@vger.kernel.org
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tariq Toukan <tariqt@mellanox.com>
Link: https://lkml.kernel.org/r/20180604162224.639011135@linutronix.de

apic_ack_edge() is explicitely for handling interrupt affinity cleanup when
interrupt remapping is not available or disable.

Remapped interrupts and also some of the platform specific special
interrupts, e.g. UV, invoke ack_APIC_irq() directly.

To address the issue of failing an affinity update with -EBUSY the delayed
affinity mechanism can be reused, but ack_APIC_irq() does not handle
that. Adding this to ack_APIC_irq() is not possible, because that function
is also used for exceptions and directly handled interrupts like IPIs.

Create a new function, which just contains the conditional invocation of
irq_move_irq() and the final ack_APIC_irq().

Reuse the new function in apic_ack_edge().

Preparatory change for the real fix.

Fixes: dccfe314 ("x86/vector: Simplify vector move cleanup")
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NSong Liu <songliubraving@fb.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <liu.song.a23@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: stable@vger.kernel.org
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tariq Toukan <tariqt@mellanox.com>
Link: https://lkml.kernel.org/r/20180604162224.471925894@linutronix.de

Several people observed the WARN_ON() in irq_matrix_free() which triggers
when the caller tries to free an vector which is not in the allocation
range. Song provided the trace information which allowed to decode the root
cause.

The rework of the vector allocation mechanism failed to preserve a sanity
check, which prevents setting a new target vector/CPU when the previous
affinity change has not fully completed.

As a result a half finished affinity change can be overwritten, which can
cause the leak of a irq descriptor pointer on the previous target CPU and
double enqueue of the hlist head into the cleanup lists of two or more
CPUs. After one CPU cleaned up its vector the next CPU will invoke the
cleanup handler with vector 0, which triggers the out of range warning in
the matrix allocator.

Prevent this by checking the apic_data of the interrupt whether the
move_in_progress flag is false and the hlist node is not hashed. Return
-EBUSY if not.

This prevents the damage and restores the behaviour before the vector
allocation rework, but due to other changes in that area it also widens the
chance that user space can observe -EBUSY. In theory this should be fine,
but actually not all user space tools handle -EBUSY correctly. Addressing
that is not part of this fix, but will be addressed in follow up patches.

Fixes: 69cde000 ("x86/vector: Use matrix allocator for vector assignment")
Reported-by: NDmitry Safonov <0x7f454c46@gmail.com>
Reported-by: NTariq Toukan <tariqt@mellanox.com>
Reported-by: NSong Liu <liu.song.a23@gmail.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NSong Liu <songliubraving@fb.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/20180604162224.303870257@linutronix.de

Both AMD and Intel can have SPEC_CTRL_MSR for SSBD.

However AMD also has two more other ways of doing it - which
are !SPEC_CTRL MSR ways.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: kvm@vger.kernel.org
Cc: KarimAllah Ahmed <karahmed@amazon.de>
Cc: andrew.cooper3@citrix.com
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lkml.kernel.org/r/20180601145921.9500-4-konrad.wilk@oracle.com

The AMD document outlining the SSBD handling
124441_AMD64_SpeculativeStoreBypassDisable_Whitepaper_final.pdf
mentions that if CPUID 8000_0008.EBX[24] is set we should be using
the SPEC_CTRL MSR (0x48) over the VIRT SPEC_CTRL MSR (0xC001_011f)
for speculative store bypass disable.

This in effect means we should clear the X86_FEATURE_VIRT_SSBD
flag so that we would prefer the SPEC_CTRL MSR.

See the document titled:
   124441_AMD64_SpeculativeStoreBypassDisable_Whitepaper_final.pdf

A copy of this document is available at
   https://bugzilla.kernel.org/show_bug.cgi?id=199889Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Cc: kvm@vger.kernel.org
Cc: KarimAllah Ahmed <karahmed@amazon.de>
Cc: andrew.cooper3@citrix.com
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20180601145921.9500-3-konrad.wilk@oracle.com

The AMD document outlining the SSBD handling
124441_AMD64_SpeculativeStoreBypassDisable_Whitepaper_final.pdf
mentions that the CPUID 8000_0008.EBX[26] will mean that the
speculative store bypass disable is no longer needed.

A copy of this document is available at:
    https://bugzilla.kernel.org/show_bug.cgi?id=199889Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Cc: kvm@vger.kernel.org
Cc: andrew.cooper3@citrix.com
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lkml.kernel.org/r/20180601145921.9500-2-konrad.wilk@oracle.com

The idt_setup_apic_and_irq_gates() sets the gates from
FIRST_EXTERNAL_VECTOR up to FIRST_SYSTEM_VECTOR first. then secondly, from
FIRST_SYSTEM_VECTOR to NR_VECTORS, it takes both APIC=y and APIC=n into
account.

But for APIC=n, the FIRST_SYSTEM_VECTOR is equal to NR_VECTORS, all
vectors has been set at the first step.

Simplify the second step, make it just work for APIC=y.
Signed-off-by: NDou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20180523023555.2933-1-douly.fnst@cn.fujitsu.com