cx18: Disable write retries for registers that always change - part 1.
Interrupt related registers will likely not read back the value we just wrote.
Disable retries for these registers for now to avoid accidently discarding
interrupts.  More intelligent read back verification criteria are needed for
these and other registers (e.g. GPIO line registers), which will be addressed in
subsequent changes.
Signed-off-by: NAndy Walls <awalls@radix.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

* Apparently the author of the saa7110 driver was confused by the
  number of outputs returned by DECODER_GET_CAPABILITIES. Of course a
  decoder chip has no analog ouputs, but it must have at least one
  digital output.

* Fix an off-by-one error when checking the input value of
  DECODER_SET_INPUT.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Attached is a patch that updates the cx88 documentation to add the fact the
closed caption works for at least NTSC capture.

ps: I also updated the wiki at:
http://www.linuxtv.org/v4lwiki/index.php/Text_capture#cx88_devicesSigned-off-by: NRafael Diniz <diniz@wimobilis.com.br>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The attached patch fix VBI support cx88 card.
I'm running a capture for hours, getting the closed caption from it[1], and
it's working perfect - the output is the same of a bttv card.
Please apply this patch as soon as possible.

[1] - using zvbi-ntsc-cc of zvbi project.
Signed-off-by: NRafael Diniz <diniz@wimobilis.com.br>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NCostantino Leandro <lcostantino@gmail.com>
Signed-off-by: NErik Andrén <erik.andren@gmail.com>
Signed-off-by: NFrank Zago <frank@zago.net>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

config\tDVB_USB_CINERGY_T2 causes the make_kconfig.pl to forget to enable by default the compilation of cinergyT2 module.
Signed-off-by: NThierry MERLE <thierry.merle@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

There already is an report at kernel bugzilla about this issue:
http://bugzilla.kernel.org/show_bug.cgi?id=9455

When enabling extra checks for the i2c-bus of cx88 based cards by
loading i2c_algo_bit with bit_test=1 this may trigger an oops
when loading cx88_dvb.

This is caused by the extra check code that detects that the
sda-line is stuck high and thus does not register the i2c-bus.

cx88-dvb however does not check if the i2c-bus is valid and just
uses core->i2c_adap to attach dvb frontend modules.
This leads to an oops at the first call to i2c_transfer:

$ modprobe i2c_algo_bit bit_test=1
$ modprobe cx8802

cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
cx88[0]: quirk: PCIPCI_NATOMA -- set TBFX
cx88[0]: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37,autodetected], frontend(s): 1
cx88[0]: TV tuner type 4, Radio tuner type -1
cx88[0]: SDA stuck high!
cx88[0]: i2c register FAILED
input: cx88 IR (Hauppauge Nova-S-Plus  as /class/input/input5
cx88[0]/2: cx2388x 8802 Driver Manager
cx88-mpeg driver manager 0000:00:10.2: enabling device (0154 -> 0156)
cx88-mpeg driver manager 0000:00:10.2: PCI INT A -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9
cx88[0]/2: found at 0000:00:10.2, rev: 5, irq: 9, latency: 64, mmio: 0xfb000000
cx8802_probe() allocating 1 frontend(s)
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37]
cx88[0]/2: cx2388x based DVB/ATSC card
BUG: unable to handle kernel NULL pointer dereference at 00000000
IP: [<e084d4ef>] :i2c_core:i2c_transfer+0x1f/0x80
*pde = 00000000
Modules linked in: cx88_dvb(+) cx8802 cx88xx ir_common i2c_algo_bit tveeprom videobuf_dvb btcx_risc
mga drm ipv6 fscpos eeprom nfsd exportfs stv0299 b2c2_flexcop_pci b2c2_flexcop cx24123 s5h1420 ves1x93
dvb_ttpci dvb_core saa7146_vv saa7146 videobuf_dma_sg videobuf_core videodev v4l1_compat ttpci_eeprom
lirc_serial lirc_dev usbhid rtc uhci_hcd 8139too i2c_piix4 i2c_core usbcore evdev
Pid: 4249, comm: modprobe Not tainted (2.6.27-gentoo #3)
EIP: 0060:[<e084d4ef>] EFLAGS: 00010296 CPU: 0
EIP is at i2c_transfer+0x1f/0x80 [i2c_core]
EAX: 00000000 EBX: ffffffa1 ECX: 00000002 EDX: d6c71e3c
ESI: d80cd050 EDI: d8093c00 EBP: d6c71e20 ESP: d6c71e0c
DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Impact: driver could possibly stomp on resources outside of its scope

{mchehab@redhat.com: I got two versions of the same patch (identical,
except for whitespacing). One authored by Andy Burns and another
authored by Suresh Siddha. Due to that, I'm applying the one that has
less CodingStyle errors. I'm also adding both comments and the SOB's for
both patches, since they are both interesting}

Suresh Siddha commented:

  Alexey Fisher reported:

  > resource map sanity check conflict: 0xcfeff800 0xcff007ff 0xcfe00000
  > 0xcfefffff PCI Bus 0000:01

  BAR base is located in the middle of the 4K page and the hardcoded
  size argument makes the request span two pages causing the conflict.

  Fix the hard coded size argument in ioremap().

Andy Burns commented:

  I have already sent this patch on the linux-dvb list, but it didn't get
  much attention, so re-sending direct, I hope you all don't mind.

  While attempting to run mythtv in a xen domU, I encountered problems
  loading the driver for my saa7134 card, with an error from ioremap().

  This error was due to the driver allocating an incorrectly sized mmio
  area, which was trapped by xen's permission checks, but this would go
  un-noticed on a kernel without xen.

  My card has a 1K sized mmio area, I've had information that other cards
  have 2K areas, perhaps others have different sizes, yet the driver
  always attempts to map 4K.  I realise that the granularity of mapping is
  the page size, which typically would be 4K, but unless the card's base
  address happens to fall on a 4K boundary (mine does not) then the
  base+4K will end up spanning two pages, and this is when the error
  occurs under xen.

  My patch uses the pci_resource_len macro to determine the size required
  for the user's particular card, instead of the hardcoded 4K value. I've
  tested with a couple of printk() inside ioremap() that the start address
  and size do get rounded to the closest page boundary.

  With this patch I am able to successfully load the saa7134 driver and
  run mythtv under xen with my card, subject to correct pollirq settings
  in case of shared IRQ, I am still seeing occasional DMA panics, which I
  think are related to swiotlb handling by dom0/domU, usually the panic
  occurs when changing mux, once tuned to a mux, 12 hour continuous
  recordings are possible without errors.
Reported-by: NAlexey Fisher <bug-track@fisher-privat.net>
Tested-by: NAlexey Fisher <bug-track@fisher-privat.net>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NAndy Burns <andy@burns.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove lock_kernel() call from cafe_ccic.c

Commit d56dc612 added lock_kernel()
calls to cafe_ccic.c.  But that driver was written with proper locking
and does not need the BKL, so take it back out.
Signed-off-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch adds the missing compat ioctls that are needed to
operate Skype in combination with libv4l and a MJPEG only camera.

If you think it's trivial enough please submit it to -stable, too.
Signed-off-by: NGregor Jasny <gjasny@web.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

As reported by David Ellingsworth:
> I'm not sure if it matters or not, but the ibmcam driver in the
> Mauro's linux-2.6 git tree in the for_linus branch is currently
> broken.

uvd is equal to NULL during most of ibmcam_probe. Due to that, an OOPS is
generated at dev_info. This patch replaces uvd->dev->dev to dev->dev
inside this routine.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Reviewed-by: NDavid Ellingsworth <david@identd.dyndns.org>

This patch add support for new device named KWorld USB FM Radio
SnapMusic Mobile 700 (FM700).
And changes few lines in comments.
Signed-off-by: NAlexey Klimov <klimov.linux@gmail.com>
Acked-by: NTobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Update Kconfig to add missing dependency on zl10353 for dtv5100 driver.
Signed-off-by: NAntoine Jacquet <royale@zerezo.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

rather than implementing different ways leading to confusion.

This allows multiple gate_enable/disable's in the tuner_read/write
functions, thereby lesser number of I/O operations throughout,
eventually leading to better results. As a side effect demods that
detect the STOP bit for auto closing of the gate can be avoided, thereby
a very minimal gain in disabling the auto detect feature as well.
Improves readability on the device control.
Signed-off-by: NManu Abraham <manu@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The tuner-3036 and dpc7146 drivers have been deleted now so we can
remove the corresponding entries from feature-removal-schedule.txt.
(Thanks for doing this, BTW.)
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This device is already handled by radio-si470x driver, and we
therefore want usbhid to ignore it.
Signed-off-by: NAlexey Klimov <klimov.linux@gmail.com>
Acked-by: NTobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Make the HP EliteBook 8530p use AD1884A model laptop
  ALSA: gusextreme: Fix build errors
  ALSA: hdsp: check for iobox and upload firmware during ioctl
  ALSA: HDSP: check for io box before uploading firmware
  ALSA: hda - Add another HP model (6730s) for AD1884A
  alsa: fix snd_BUG_on() and friends
  ALSA: hda - Add a quirk for MEDION MD96630
  ALSA: hda - Limit the number of GPIOs show in proc

Added a QUIRK to patch_analog.c for the HP Elitebook 8530p
(IDs 0x103c:0x30e7) to use AD1884A model 'laptop' by default.
Playback and Capture confirmed working.
Signed-off-by: NTravis Place <wishie@wishie.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch reverts the following three commits which convert libata to
use block layer tagging.

 43a49cbd
 e013e13b
 2fca5ccf

Although using block layer tagging is the right direction, due to the
tight coupling among tag number, data structure allocation and
hardware command slot allocation, libata doesn't work correctly with
the current conversion.

The biggest problem is guaranteeing that tag 0 is always used for
non-NCQ commands.  Due to the way blk-tag is implemented and how SCSI
starts and finishes requests, such guarantee can't be made.  I'm not
sure whether this would actually break any low level driver but it
doesn't look like a good idea to break such assumption given the
frailty of ATA controllers.

So, for the time being, keep using the old dumb in-libata qc
allocation.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Jens Axobe <jens.axboe@oracle.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

gusextreme depends on opl3 support. Add the approriate select to Kconfig.
Also remove the unnecessary hwdep select.

Relevant build errors:
ERROR: "snd_opl3_hwdep_new" [sound/isa/gus/snd-gusextreme.ko] undefined!
ERROR: "snd_opl3_create" [sound/isa/gus/snd-gusextreme.ko] undefined!
Signed-off-by: NVille Syrjala <syrjala@sci.fi>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It's showing up as regressions; disabling it very likely just papers
over an underlying issue, but time is running out for 2.6.28, lets get
back to this for 2.6.29

Fixes: #11826 and #11893
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
  kbuild: Fixup deb-pkg target to generate separate firmware deb

The below is a simplistic fix for "make deb-pkg"; it splits the
firmware out to a linux-firmware-image package and adds an
(unversioned) Suggests to the linux package for this firmware.
Signed-Off-By: NJonathan McDowell <noodles@earth.li>
Acked-by: NFrans Pop <elendil@planet.nl>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

The "Exclude staging drivers" question is there so that we don't build
staging drivers for allyesconfig or allnoconfig settings, but it's very
irritating when you've already said "no" to staging drivers earlier.

There is absolutely no point in declining twice - once you've declined
the staging drivers, you're done.

So make the second question depend on the first question having been
answered in the affirmative.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-2.6.28' of git://linux-nfs.org/~bfields/linux:
  Fix nfsd truncation of readdir results

* 'cpus4096' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  cpumask: introduce new API, without changing anything, v3
  cpumask: new API, v2
  cpumask: introduce new API, without changing anything

Commit 8d7c4203 "nfsd: fix failure to set eof in readdir in some
situations" introduced a bug: on a directory in an exported ext3
filesystem with dir_index unset, a READDIR will only return about 250
entries, even if the directory was larger.

Bisected it back to this commit; reverting it fixes the problem.

It turns out that in this case ext3 reads a block at a time, then
returns from readdir, which means we can end up with buf.full==0 but
with more entries in the directory still to be read.  Before 8d7c4203
(but after c002a6c7 "Optimise NFS readdir hack slightly"), this would
cause us to return the READDIR result immediately, but with the eof bit
unset.  That could cause a performance regression (because the client
would need more roundtrips to the server to read the whole directory),
but no loss in correctness, since the cleared eof bit caused the client
to send another readdir.  After 8d7c4203, the setting of the eof bit
made this a correctness problem.

So, move nfserr_eof into the loop and remove the buf.full check so that
we loop until buf.used==0.  The following seems to do the right thing
and reduces the network traffic since we don't return a READDIR result
until the buffer is full.

Tested on an empty directory & large directory; eof is properly sent and
there are no more short buffers.
Signed-off-by: NDoug Nazar <nazard@dragoninc.ca>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Impact: cleanup

Clean up based on feedback from Andrew Morton and others:

 - change to inline functions instead of macros
 - add __init to bootmem method
 - add a missing debug check
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Previously I assumed that the receive queues of candidates don't
change during the GC.  This is only half true, nothing can be received
from the queues (see comment in unix_gc()), but buffers could be added
through the other half of the socket pair, which may still have file
descriptors referring to it.

This can result in inc_inflight_move_tail() erronously increasing the
"inflight" counter for a unix socket for which dec_inflight() wasn't
previously called.  This in turn can trigger the "BUG_ON(total_refs <
inflight_refs)" in a later garbage collection run.

Fix this by only manipulating the "inflight" counter for sockets which
are candidates themselves.  Duplicating the file references in
unix_attach_fds() is also needed to prevent a socket becoming a
candidate for GC while the skb that contains it is not yet queued.
Reported-by: NAndrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
CC: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, all existing users of cnt32_to_63() are fine since the CPU
architectures where it is used don't do read access reordering, and user
mode preemption is disabled already.  It is nevertheless a good idea to
better elaborate usage requirements wrt preemption, and use an explicit
memory barrier on SMP to avoid different CPUs accessing the counter
value in the wrong order.  On UP a simple compiler barrier is
sufficient.
Signed-off-by: NNicolas Pitre <nico@marvell.com>
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  mmc: struct device - replace bus_id with dev_name(), dev_set_name()
  mmc: increase SD write timeout for crappy cards

Use menuconfig instead of flat configs so that you can disable/enable
regulator items with one selection.  Also, use depends instead of
reverse selections to make life easier, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>

currently, the error message when trying to run hdspmixer or hdspconf
if the breakout box is not connected is somehow misleading, since it
asks the user to upload the firmware.

this patch adds a test, whether the breakout box is connected and
tries to upload the firmware in the case, that it is not present, e.g.
because of power failures of the breakout box.

[Minor coding-style fixes by tiwai]
Signed-off-by: NTim Blechmann <tim@klingt.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

currently the hdsp driver tries to upload the firmware, even if the
io box is not connected. this patch adds a check for the io box
before trying to upload the firmware.
thus instead of messages complaining about the fifo status and firmware
loading failure, the driver gives a message that no multiface or
digiface is connected.

[A minor coding-style fix by tiwai]
Signed-off-by: NTim Blechmann <tim@klingt.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added model=laptop for another HP machine (103c:3614) with AD1884A
codec.
Signed-off-by: NMichel Marti <mma@objectxp.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-Off-By: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

It seems that some cards are slightly out of spec and occasionally
will not be able to complete a write in the alloted 250 ms [1].
Incease the timeout slightly to allow even these cards to function
properly.

[1] http://lkml.org/lkml/2008/9/23/390Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: optimize sched_clock() a bit
  sched: improve sched_clock() performance