For addresses above 512TB we allocate additional mmu contexts. To make
it all easy, addresses above 512TB are handled with IR/DR=1 and with
stack frame setup.

The mmu_context_t is also updated to track the new extended_ids. To
support upto 4PB we need a total 8 contexts.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Minor formatting tweaks and comment wording, switch BUG to WARN
      in get_ea_context().]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

signal_code is always TRAP_HWBKPT
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Platforms with a panic handler that halts the system can have problems
getting kernel messages out, because the panic notifiers are called
before kernel/panic.c does its flushing of printk buffers an console
etc.

This was attempted to be solved with commit a3b2cb30 ("powerpc: Do
not call ppc_md.panic in fadump panic notifier"), but that wasn't the
right approach and caused other problems, and was reverted by commit
ab9dbf77.

Instead, the powernv shutdown paths have already had a similar
problem, fixed by taking the message flushing sequence from
kernel/panic.c. That's a little bit ugly, but while we have the code
duplicated, it will work for this case as well. So have ppc panic
handlers do the same flushing before they terminate.

Without this patch, a qemu pseries_le_defconfig guest stops silently
when issued the nmi command when xmon is off and no crash dumpers
enabled. Afterwards, an oops is printed by each CPU as expected.

Fixes: ab9dbf77 ("Revert "powerpc: Do not call ppc_md.panic in fadump panic notifier"")
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Symbolic macros are unintuitive and hard to read, whereas octal constants
are much easier to interpret.  Replace macros for the basic permission
flags (user/group/other read/write/execute) with numeric constants
instead, across the whole powerpc tree.

Introducing a significant number of changes across the tree for no runtime
benefit isn't exactly desirable, but so long as these macros are still
used in the tree people will keep sending patches that add them.  Not only
are they hard to parse at a glance, there are multiple ways of coming to
the same value (as you can see with 0444 and 0644 in this patch) which
hurts readability.
Signed-off-by: NRussell Currey <ruscur@russell.cc>
Reviewed-by: NCyril Bur <cyrilbur@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The AMR/IAMR/UAMOR are part of the program context.
Allow it to be accessed via ptrace and through core files.
Signed-off-by: NRam Pai <linuxram@us.ibm.com>
Signed-off-by: NThiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The value of the pkey, whose protection got violated,
is made available in si_pkey field of the siginfo structure.
Signed-off-by: NRam Pai <linuxram@us.ibm.com>
Signed-off-by: NThiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The die() oops path contains a serializing lock to prevent oops
messages from being interleaved. In the case of a system reset
initiated oops (e.g., qemu nmi command), __die was being called
which lacks that synchronisation and oops reports could be
interleaved across CPUs.

A recent patch 4388c9b3 ("powerpc: Do not send system reset
request through the oops path") changed this to __die to avoid
the debugger() call, but there is no real harm to calling it twice
if the first time fell through. So go back to using die() here.
This was observed to fix the problem.

Fixes: 4388c9b3 ("powerpc: Do not send system reset request through the oops path")
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Trap numbers can have extra bits at the bottom that need to
be filtered out. There are a few cases where we don't do that.

It's possible that we got lucky but better safe than sorry.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Setting si_code to 0 results in a userspace seeing an si_code of 0.
This is the same si_code as SI_USER.  Posix and common sense requires
that SI_USER not be a signal specific si_code.  As such this use of 0
for the si_code is a pretty horribly broken ABI.

Further use of si_code == 0 guaranteed that copy_siginfo_to_user saw a
value of __SI_KILL and now sees a value of SIL_KILL with the result
that uid and pid fields are copied and which might copying the si_addr
field by accident but certainly not by design.  Making this a very
flakey implementation.

Utilizing FPE_FIXME and TRAP_FIXME, siginfo_layout() will now return
SIL_FAULT and the appropriate fields will be reliably copied.

Possible ABI fixes includee:
- Send the signal without siginfo
- Don't generate a signal
- Possibly assign and use an appropriate si_code
- Don't handle cases which can't happen
Cc: Paul Mackerras <paulus@samba.org>
Cc: Kumar Gala <kumar.gala@freescale.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc:  linuxppc-dev@lists.ozlabs.org
Ref: 9bad068c24d7 ("[PATCH] ppc32: support for e500 and 85xx")
Ref: 0ed70f6105ef ("PPC32: Provide proper siginfo information on various exceptions.")
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.gitSigned-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

After handling a transactional FP, Altivec or VSX unavailable exception.
The return to userspace code will detect that the TIF_RESTORE_TM bit is
set and call restore_tm_state(). restore_tm_state() will call
restore_math() to ensure that the correct facilities are loaded.

This means that all the loadup code in {fp,altivec,vsx}_unavailable_tm()
is doing pointless work and can simply be removed.
Signed-off-by: NCyril Bur <cyrilbur@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Lazy save and restore of FP/Altivec means that a userspace process can
be sent to userspace with FP or Altivec disabled and loaded only as
required (by way of an FP/Altivec unavailable exception). Transactional
Memory complicates this situation as a transaction could be started
without FP/Altivec being loaded up. This causes the hardware to
checkpoint incorrect registers. Handling FP/Altivec unavailable
exceptions while a thread is transactional requires a reclaim and
recheckpoint to ensure the CPU has correct state for both sets of
registers.

tm_reclaim() has optimisations to not always save the FP/Altivec
registers to the checkpointed save area. This was originally done
because the caller might have information that the checkpointed
registers aren't valid due to lazy save and restore. We've also been a
little vague as to how tm_reclaim() leaves the FP/Altivec state since it
doesn't necessarily always save it to the thread struct. This has lead
to an (incorrect) assumption that it leaves the checkpointed state on
the CPU.

tm_recheckpoint() has similar optimisations in reverse. It may not
always reload the checkpointed FP/Altivec registers from the thread
struct before the trecheckpoint. It is therefore quite unclear where it
expects to get the state from. This didn't help with the assumption
made about tm_reclaim().

These optimisations sit in what is by definition a slow path. If a
process has to go through a reclaim/recheckpoint then its transaction
will be doomed on returning to userspace. This mean that the process
will be unable to complete its transaction and be forced to its failure
handler. This is already an out if line case for userspace. Furthermore,
the cost of copying 64 times 128 bits from registers isn't very long[0]
(at all) on modern processors. As such it appears these optimisations
have only served to increase code complexity and are unlikely to have
had a measurable performance impact.

Our transactional memory handling has been riddled with bugs. A cause
of this has been difficulty in following the code flow, code complexity
has not been our friend here. It makes sense to remove these
optimisations in favour of a (hopefully) more stable implementation.

This patch does mean that some times the assembly will needlessly save
'junk' registers which will subsequently get overwritten with the
correct value by the C code which calls the assembly function. This
small inefficiency is far outweighed by the reduction in complexity for
general TM code, context switching paths, and transactional facility
unavailable exception handler.

0: I tried to measure it once for other work and found that it was
hiding in the noise of everything else I was working with. I find it
exceedingly likely this will be the case here.
Signed-off-by: NCyril Bur <cyrilbur@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Lazy save and restore of FP/Altivec means that a userspace process can
be sent to userspace with FP or Altivec disabled and loaded only as
required (by way of an FP/Altivec unavailable exception). Transactional
Memory complicates this situation as a transaction could be started
without FP/Altivec being loaded up. This causes the hardware to
checkpoint incorrect registers. Handling FP/Altivec unavailable
exceptions while a thread is transactional requires a reclaim and
recheckpoint to ensure the CPU has correct state for both sets of
registers.

tm_reclaim() has optimisations to not always save the FP/Altivec
registers to the checkpointed save area. This was originally done
because the caller might have information that the checkpointed
registers aren't valid due to lazy save and restore. We've also been a
little vague as to how tm_reclaim() leaves the FP/Altivec state since it
doesn't necessarily always save it to the thread struct. This has lead
to an (incorrect) assumption that it leaves the checkpointed state on
the CPU.

tm_recheckpoint() has similar optimisations in reverse. It may not
always reload the checkpointed FP/Altivec registers from the thread
struct before the trecheckpoint. It is therefore quite unclear where it
expects to get the state from. This didn't help with the assumption
made about tm_reclaim().

This patch is a minimal fix for ease of backporting. A more correct fix
which removes the msr parameter to tm_reclaim() and tm_recheckpoint()
altogether has been upstreamed to apply on top of this patch.

Fixes: dc310669 ("powerpc: tm: Always use fp_state and vr_state to
store live registers")
Signed-off-by: NCyril Bur <cyrilbur@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Lazy save and restore of FP/Altivec means that a userspace process can
be sent to userspace with FP or Altivec disabled and loaded only as
required (by way of an FP/Altivec unavailable exception). Transactional
Memory complicates this situation as a transaction could be started
without FP/Altivec being loaded up. This causes the hardware to
checkpoint incorrect registers. Handling FP/Altivec unavailable
exceptions while a thread is transactional requires a reclaim and
recheckpoint to ensure the CPU has correct state for both sets of
registers.

Lazy save and restore of FP/Altivec cannot be done if a process is
transactional. If a facility was enabled it must remain enabled whenever
a thread is transactional.

Commit dc16b553 ("powerpc: Always restore FPU/VEC/VSX if hardware
transactional memory in use") ensures that the facilities are always
enabled if a thread is transactional. A bug in the introduced code may
cause it to inadvertently enable a facility that was (and should remain)
disabled. The problem with this extraneous enablement is that the
registers for the erroneously enabled facility have not been correctly
recheckpointed - the recheckpointing code assumed the facility would
remain disabled.

Further compounding the issue, the transactional {fp,altivec,vsx}
unavailable code has been incorrectly using the MSR to enable
facilities. The presence of the {FP,VEC,VSX} bit in the regs->msr simply
means if the registers are live on the CPU, not if the kernel should
load them before returning to userspace. This has worked due to the bug
mentioned above.

This causes transactional threads which return to their failure handler
to observe incorrect checkpointed registers. Perhaps an example will
help illustrate the problem:

A userspace process is running and uses both FP and Altivec registers.
This process then continues to run for some time without touching
either sets of registers. The kernel subsequently disables the
facilities as part of lazy save and restore. The userspace process then
performs a tbegin and the CPU checkpoints 'junk' FP and Altivec
registers. The process then performs a floating point instruction
triggering a fp unavailable exception in the kernel.

The kernel then loads the FP registers - and only the FP registers.
Since the thread is transactional it must perform a reclaim and
recheckpoint to ensure both the checkpointed registers and the
transactional registers are correct. It then (correctly) enables
MSR[FP] for the process. Later (on exception exist) the kernel also
(inadvertently) enables MSR[VEC]. The process is then returned to
userspace.

Since the act of loading the FP registers doomed the transaction we know
CPU will fail the transaction, restore its checkpointed registers, and
return the process to its failure handler. The problem is that we're
now running with Altivec enabled and the 'junk' checkpointed registers
are restored. The kernel had only recheckpointed FP.

This patch solves this by only activating FP/Altivec if userspace was
using them when it entered the kernel and not simply if the process is
transactional.

Fixes: dc16b553 ("powerpc: Always restore FPU/VEC/VSX if hardware
transactional memory in use")
Signed-off-by: NCyril Bur <cyrilbur@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Currently when we take a TM Bad Thing program check exception, we
search the bug table to see if the program check was generated by a
WARN/WARN_ON etc.

That makes no sense, the WARN macros use trap instructions, which
should never generate a TM Bad Thing exception. If they ever did that
would be a bug and we should oops.

We do have some hand-coded bugs in tm.S, using EMIT_BUG_ENTRY, but
those are all BUGs not WARNs, and they all use trap instructions
anyway. Almost certainly this check was incorrectly copied from the
REASON_TRAP handling in the same function.

Remove it.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Acked-By: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

POWER9 DD2.1 and earlier has an issue where some cache inhibited
vector load will return bad data. The workaround is two part, one
firmware/microcode part triggers HMI interrupts when hitting such
loads, the other part is this patch which then emulates the
instructions in Linux.

The affected instructions are limited to lxvd2x, lxvw4x, lxvb16x and
lxvh8x.

When an instruction triggers the HMI, all threads in the core will be
sent to the HMI handler, not just the one running the vector load.

In general, these spurious HMIs are detected by the emulation code and
we just return back to the running process. Unfortunately, if a
spurious interrupt occurs on a vector load that's to normal memory we
have no way to detect that it's spurious (unless we walk the page
tables, which is very expensive). In this case we emulate the load but
we need do so using a vector load itself to ensure 128bit atomicity is
preserved.

Some additional debugfs emulated instruction counters are added also.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Switch CONFIG_PPC_BOOK3S_64 to CONFIG_VSX to unbreak the build]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Use nmi_enter similarly to system reset interrupts. This uses NMI
printk NMI buffers and turns off various debugging facilities that
helps avoid tripping on ourselves or other CPUs.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

There are quite a few machine check exceptions that can be caused by
kernel bugs. To make debugging easier, use the kernel crash path in
cases of synchronous machine checks that occur in kernel mode, if that
would not result in the machine going straight to panic or crash dump.

There is a downside here that die()ing the process in kernel mode can
still leave the system unstable. panic_on_oops will always force the
system to fail-stop, so systems where that behaviour is important will
still do the right thing.

As a test, when triggering an i-side 0111b error (ifetch from foreign
address) in kernel mode process context on POWER9, the kernel currently
dies quickly like this:

  Severe Machine check interrupt [Not recovered]
    NIP [ffff000000000000]: 0xffff000000000000
    Initiator: CPU
    Error type: Real address [Instruction fetch (foreign)]
  [  127.426651616,0] OPAL: Reboot requested due to Platform error.
      Effective[  127.426693712,3] OPAL: Reboot requested due to Platform error. address: ffff000000000000
  opal: Reboot type 1 not supported
  Kernel panic - not syncing: PowerNV Unrecovered Machine Check
  CPU: 56 PID: 4425 Comm: syscall Tainted: G   M            4.12.0-rc1-13857-ga4700a26-dirty #35
  Call Trace:
  [  128.017988928,4] IPMI: BUG: Dropping ESEL on the floor due to
    buggy/mising code in OPAL for this BMC
    Rebooting in 10 seconds..
  Trying to free IRQ 496 from IRQ context!

After this patch, the process is killed and the kernel continues with
this message, which gives enough information to identify the offending
branch (i.e., with CFAR):

  Severe Machine check interrupt [Not recovered]
    NIP [ffff000000000000]: 0xffff000000000000
    Initiator: CPU
    Error type: Real address [Instruction fetch (foreign)]
      Effective address: ffff000000000000
  Oops: Machine check, sig: 7 [#1]
  SMP NR_CPUS=2048
  NUMA
  PowerNV
  Modules linked in: iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 ...
  CPU: 22 PID: 4436 Comm: syscall Tainted: G   M            4.12.0-rc1-13857-ga4700a26-dirty #36
  task: c000000932300000 task.stack: c000000932380000
  NIP: ffff000000000000 LR: 00000000217706a4 CTR: ffff000000000000
  REGS: c00000000fc8fd80 TRAP: 0200   Tainted: G   M             (4.12.0-rc1-13857-ga4700a26-dirty)
  MSR: 90000000001c1003 <SF,HV,ME,RI,LE>
    CR: 24000484  XER: 20000000
  CFAR: c000000000004c80 DAR: 0000000021770a90 DSISR: 0a000000 SOFTE: 1
  GPR00: 0000000000001ebe 00007fffce4818b0 0000000021797f00 0000000000000000
  GPR04: 00007fff8007ac24 0000000044000484 0000000000004000 00007fff801405e8
  GPR08: 900000000280f033 0000000024000484 0000000000000000 0000000000000030
  GPR12: 9000000000001003 00007fff801bc370 0000000000000000 0000000000000000
  GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR28: 00007fff801b0000 0000000000000000 00000000217707a0 00007fffce481918
  NIP [ffff000000000000] 0xffff000000000000
  LR [00000000217706a4] 0x217706a4
  Call Trace:
  Instruction dump:
  XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
  XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Reviewed-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

A system reset is a request to crash / debug the system rather than
necessarily caused by encountering a BUG. So there is no need to
serialize all CPUs behind the die lock, adding taints to all
subsequent traces beyond the first, breaking console locks, etc.

The system reset is NMI context which has its own printk buffers to
prevent output being interleaved. Then it's better to have all
secondaries print out their debug as quickly as possible and the
primary will flush out all printk buffers during panic().

So remove the 0x100 path from die, and move it into system_reset. Name
the crash/dump reasons "System Reset".

This gives "not tained" traces when crashing an untainted kernel. It
also gives the panic reason as "System Reset" as opposed to "Fatal
exception in interrupt" (or "die oops" for fadump).
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This patch updates the machine check handler of Linux kernel to
handle the e6500 architecture case. In e6500 core, L1 Data Cache Write
Shadow Mode (DCWS) register is not implemented but L1 data cache always
runs in write shadow mode. So, on L1 data cache parity errors, hardware
will automatically invalidate the data cache but will still log a
machine check interrupt.
Signed-off-by: NRonak Desai <ronak.desai@rockwellcollins.com>
Signed-off-by: NMatthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: NScott Wood <oss@buserror.net>

Just because it looks less gross.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Although the MSR tells you what endian you're in it's possible that
isn't the same endian the kernel was built for, and if that happens
you're usually having a very bad day. So print a marker to make
it 100% clear which endian the kernel was built for.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

When we oops we print a few markers for significant config options
such as PREEMPT, SMP etc. Currently these appear on separate lines
because we're not using pr_cont() properly. Fix it.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Since commit aa42c69c ("[POWERPC] Add support for FP emulation
for the e300c2 core"), program_check_exception() can be called for
math emulation. In that case, 'reason' is 0.

On the 8xx, there is a Software Emulation interrupt which is
called for all unimplemented and illegal instructions. This
interrupt calls SoftwareEmulation() which does almost the
same as program_check_exception() called with reason = 0.

The Software Emulation interrupt sets all reason bits to 0,
it is therefore possible to call program_check_exception()
directly from the interrupt handler.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In the same spirit as what was done for 4xx and 44x, move
the 8xx machine check into platforms/8xx
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Currently we open code the reason codes for program checks. Instead use
the existing SRR1 defines.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We already have mce.c which is built for 64bit and contains other parts
of the machine check code, so move these bits in there too.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Make it clear that the fallback version of machine_check_generic() is
only used on 32-bit configs.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

get_mc_reason() no longer provides (if it ever really did) any
meaningful abstraction, so remove it.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Now that we have 4xx platform directory we can move the 4xx machine
check handler in there. Again we drop get_mc_reason() and replace it
with regs->dsisr directly (which is actually SPRN_ESR).
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We have several 44x machine check handlers defined in traps.c. It would
be preferable if they were split out with the platforms that use them.
Do that.

In the process, drop get_mc_reason() and instead just open code the
lookup of reason from regs->dsisr. This avoids a pointless layer of
abstraction.

We know to use regs->dsisr because 44x enables BOOKE which enables
PPC_ADV_DEBUG_REGS, and FSL_BOOKE is not enabled on 44x builds.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

On 64-bit Book3s, when we're in HV mode, we have already counted the
machine check exception in machine_check_early().
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
[mpe: Use IS_ENABLED() rather than an #ifdef]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Blacklist all functions involved while handling a trap. We:
- convert some of the symbols into private symbols, and
- blacklist most functions involved while handling a trap.
Reviewed-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

machine_check_early() gets called in real mode. The very first time when
add_taint() is called, it prints a warning which ends up calling opal
call (that uses OPAL_CALL wrapper) for writing it to console. If we get a
very first machine check while we are in opal we are doomed. OPAL_CALL
overwrites the PACASAVEDMSR in r13 and in this case when we are done with
MCE handling the original opal call will use this new MSR on it's way
back to opal_return. This usually leads to unexpected behaviour or the
kernel to panic. Instead move the add_taint() call later in the virtual
mode where it is safe to call.

This is broken with current FW level. We got lucky so far for not getting
very first MCE hit while in OPAL. But easily reproducible on Mambo.

Fixes: 27ea2c42 ("powerpc: Set the correct kernel taint on machine check errors.")
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

System reset is a non-maskable interrupt from Linux's point of view
(occurs under local_irq_disable()), so it should use nmi_enter/exit.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In preparation for using a dedicated stack for system reset interrupts,
prevent a nested system reset from recovering, in order to simplify
code that is called in crash/debug path. This allows a system reset
interrupt to just use the base stack pointer.

Keep an in_nmi nesting counter similarly to the in_mce counter. Consider
the interrrupt non-recoverable if it is taken inside another system
reset.

Interrupt nesting could be allowed similarly to MCE, but system reset
is a special case that's not for normal operation, so simplicity wins
until there is requirement for nested system reset interrupts.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Add the bit definition and use it in facility_unavailable_exception() so we can
intelligently report the cause if we take a fault for SCV. This doesn't actually
enable SCV.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
[mpe: Drop whitespace changes to the existing entries, flush out change log]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

powerpc_debugfs_root is the dentry representing the root of the
"powerpc" directory tree in debugfs.

Currently it sits in asm/debug.h, a long with some other things that
have "debug" in the name, but are otherwise unrelated.

Pull it out into a separate header, which also includes linux/debugfs.h,
and convert all the users to include debugfs.h instead of debug.h.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/debug.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>