Added the new PCI id to support Nvidia MCP61 in snd-hda-intel driver.
Signed-off-by: NDan Cyr <rabidfly@hotmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

This patch adds a couple of device ids for Acer laptops.  In both cases,
the owners got the driver working by adding 'model=acer' to their
modprobe.conf files.
Signed-off-by: NTobin Davis <tdavis@dsl-only.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

This patch by Luke Zhang fixes a couple of issues with the WM9712
support in ac97_patch.c
Changes:-
 o Fix Out3 ZC switch invert.
 o Extend capture volume control to 6 bits.
 o Change Mic 1 volume mask to 5 bits (31).
 o Add Mic 2 volume.
Signed-off-by: NLuke Zhang <lzhang@intrinsyc.com>
Signed-off-by: NLiam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

There are additional IDs for Si3054 codec based HDA modems. Most of
them were discovered on discuss@linmodems.org list - Thanks to MarvS
and all linmodems.org folks.
Signed-off-by: NSasha Khapyorsky <sashak@alsa-project.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Untested, but this should fix up the bulk of the totally mechanical
issues, and should make the actual detail fixing easier.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] Use CONFIG_GENERIC_TIME and define TOD clock source.
  [PATCH] sysrq: irq change build fix.
  [S390] irq change build fixes.
  [S390] cio: 0 is a valid chpid.
  [S390] monwriter buffer limit.
  [S390] ap bus poll thread priority.

Fixup broken UML build due to 7d12e780
"IRQ: Maintain regs pointer globally rather than passing to IRQ handlers".

Cc: David Howells <dhowells@redhat.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo "Blaisorblade" Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There is some confusion about the meaning of 'bufsz' for a sunrpc server.
In some cases it is the largest message that can be sent or received.  In
other cases it is the largest 'payload' that can be included in a NFS
message.

In either case, it is not possible for both the request and the reply to be
this large.  One of the request or reply may only be one page long, which
fits nicely with NFS.

So we remove 'bufsz' and replace it with two numbers: 'max_payload' and
'max_mesg'.  Max_payload is the size that the server requests.  It is used
by the server to check the max size allowed on a particular connection:
depending on the protocol a lower limit might be used.

max_mesg is the largest single message that can be sent or received.  It is
calculated as the max_payload, rounded up to a multiple of PAGE_SIZE, and
with PAGE_SIZE added to overhead.  Only one of the request and reply may be
this size.  The other must be at most one page.

Cc: Greg Banks <gnb@sgi.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This fixes a bug introduced in 2.6.18.

If a drive is added to a raid1 using older tools (mdadm-1.x or raidtools)
then it will be included in the array without any resync happening.

It has been submitted for 2.6.18.1.
Signed-off-by: NNeil Brown <neilb@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

SD cards extend the protocol by allowing the host to query a card how many
blocks were successfully stored on the medium.  This allows us to safely write
chunks of blocks at once.
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is required for the SWARM GenBus IDE interface to be recognized.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix a kerneldoc warning and reorderd the description for is_init().
Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add MAINTAINERS entries for new scx200_hrt and pc8736x_gpio drivers, and
take over maintenance of scx200_gpio, authored by Christer Weinigel (which
I've hacked at), who no longer has the hardware.

Also take over hwmon/pc87360, authored by Jean Delvare, who's dropped
maintenance to dedicate more time to hwmon subsystem.
Signed-off-by: NJim Cromie <jim.cromie@gmail.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Christer Weinigel <christer@weinigel.se>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Trivial typo fix in the "syntax error if percpu macros are incorrectly
used" patch.  I misspelled "identifier" in all places.  D'Oh!

Thanks to Dirk Mueller to point this out.
Signed-off-by: NJan Blunck <jblunck@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

annotate, fix the bogus argument of vmap() in it.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The recent header cleanup removed PAGE_SIZE from the exported information as
it depends on the configuration.

BTW This has possibly other consequences, as the core dump code is using
PAGE_SIZE directly, which may need fixing as well.
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

avoid unnecessary xchg() use in set_mb()
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Jump to the correct exit label after exception
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- cleanup asm of string functions
- deinline strncat()/strncmp()
- provide non-inlined strcpy()
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Provide a tickadj compatibility define for archs still using it.
Signed-off-by: NRoman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add a way for a no_page() handler to request a retry of the faulting
instruction.  It goes back to userland on page faults and just tries again
in get_user_pages().  I added a cond_resched() in the loop in that later
case.

The problem I have with signal and spufs is an actual bug affecting apps and I
don't see other ways of fixing it.

In addition, we are having issues with infiniband and 64k pages (related to
the way the hypervisor deals with some HV cards) that will require us to muck
around with the MMU from within the IB driver's no_page() (it's a pSeries
specific driver) and return to the caller the same way using NOPAGE_REFAULT.

And to add to this, the graphics folks have been following a new approach of
memory management that involves transparently swapping objects between video
ram and main meory.  To do that, they need installing PTEs from a no_page()
handler as well and that also requires returning with NOPAGE_REFAULT.

(For the later, they are currently using io_remap_pfn_range to install one PTE
from no_page() which is a bit racy, we need to add a check for the PTE having
already been installed afer taking the lock, but that's ok, they are only at
the proof-of-concept stage.  I'll send a patch adding a "clean" function to do
that, we can use that from spufs too and get rid of the sparsemem hacks we do
to create struct page for SPEs.  Basically, that provides a generic solution
for being able to have no_page() map hardware devices, which is something that
I think sound driver folks have been asking for some time too).

All of these things depend on having the NOPAGE_REFAULT exit path from
no_page() handlers.
Signed-off-by: NBenjamin Herrenchmidt <benh@kernel.crashing.org>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Reduce the NUMA text size of mm/slab.o a little on x86 by using a local
variable to store the result of numa_node_id().

    text    data     bss     dec     hex filename
   16858    2584      16   19458    4c02 mm/slab.o (before)
   16804    2584      16   19404    4bcc mm/slab.o (after)

[akpm@osdl.org: use better names]
[pbadari@us.ibm.com: fix that]
Cc: Christoph Lameter <christoph@lameter.com>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is a more correct fix for the way the ohci hcd was referencing pt_regs
in the unlink paths.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Modules might want this.

Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Tim and Ananiev report that the recent WARN_ON_ONCE changes cause increased
cache misses with the tbench workload.  Apparently due to the access to the
newly-added static variable.

Rearrange the code so that we don't touch that variable unless the warning is
going to trigger.

Also rework the logic so that the static variable starts out at zero, so we
can move it into bss.

It would seem logical to mark the static variable as __read_mostly too.  But
it would be wrong, because that would put it back into the vmlinux image, and
the kernel will never read from this variable in normal operation anyway.
Unless the compiler or hardware go and do some prefetching on us?

For some reason this patch shrinks softirq.o text by 40 bytes.

Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Ananiev, Leonid I" <leonid.i.ananiev@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Squash this warning:

  kernel/audit.c: In function 'kauditd_thread':
  kernel/audit.c:367: warning: no return statement in function returning non-void

We might as test kthread_should_stop(), although it's not very pointful at
present.

The code which starts this thread looks racy - the kernel could start multiple
threads.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix too slow clock by using CONFIG_GENERIC_TIME and adding a
clock source for the s390 time-of-day clock. As added benefit
we get rid of the s390 specific definition of do_gettimeofday
and do_settimeofday.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

drivers/char/sysrq.c: In function `sysrq_handle_crashdump':
drivers/char/sysrq.c:98: warning: implicit declaration of function `get_irq_regs'
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

In order to determine chpid validity, we need to check whether the
corresponding path is specified in the pim.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Make max_bufs a global (per linux guest) limit.
Signed-off-by: NMelissa Howland <melissah@us.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The ap bus is supposed to have a low priority. We must use 19 instead
of -20, which is just the opposite.
Signed-off-by: NChristian Borntraeger <cborntra@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Fix up some of the buildbreaks from the irq handler changes.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* git://git.infradead.org/~dhowells/irq-2.6:
  IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
  IRQ: Typedef the IRQ handler function type
  IRQ: Typedef the IRQ flow handler function type

The UDF filesystem can't be mounted in read-write mode any more,
because of forgotten braces.
Signed-off-by: NPeter Osterlund <petero2@telia.com>
[ Duh! ]
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Include linux/kallsyms.h unconditionally for print_symbol().
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6:
  [PATCH] i386: fix rwsem build bug on CONFIG_M386=y
  [PATCH] x86-64: Annotate interrupt frame backlink in interrupt handlers
  [PATCH] x86-64: Fix FPU corruption
  [PATCH] x86: Terminate the kernel stacks for the unwinder
  [PATCH] i386: Fix PCI BIOS config space access
  [PATCH] x86-64: Calgary IOMMU: print PCI bus numbers in hex
  [PATCH] x86-64: Calgary IOMMU: Update Jon's contact info
  [PATCH] x86-64: Calgary IOMMU: Fix off by one when calculating register space location
  [PATCH] x86-64: Calgary IOMMU: deobfuscate calgary_init
  [PATCH] i386: Update defconfig
  [PATCH] x86-64: Update defconfig

[ Manually skipped commits that incorrectly ignored AC in kernel space.
  The alignment fault is defined to only happen for CPL3 anyway  - Linus ]

commit 0181944f adds a
'extended_error_logging' global variable to qla2xxx which is defined by
qla4xxx too.

Trying to build both drivers results in the following error:

  LD      drivers/scsi/built-in.o
  drivers/scsi/qla4xxx/built-in.o: In function `qla4xxx_slave_configure':
  drivers/scsi/qla4xxx/ql4_os.c:1433: multiple definition of `extended_error_logging'
  drivers/scsi/qla2xxx/built-in.o:drivers/scsi/qla2xxx/qla_os.c:2166:
  first defined here
  make[2]: *** [drivers/scsi/built-in.o] Error 1
  make[1]: *** [drivers/scsi] Error 2
  make: *** [drivers] Error 2

The following patch simply adds a qla2_ (qla4_ respectively) prefix to
the variable name.
Signed-off-by: NFrederik Deweerdt <frederik.deweerdt@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

CONFIG_M386 turns on spinlock-based generic rwsems - which surprises the
semaphore.S rwsem stubs. Tested both with and without CONFIG_M386.
Reported-by: NKlaus Knopper <knopper@knopper.net>
Triaged-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndi Kleen <ak@suse.de>