- 31 5月, 2019 1 次提交
-
-
由 George Zhang 提交于
By default the tcp_tw_timeout value is 60 seconds. The minimum is 1 second and the maximum is 600. This setting is useful on system under heavy tcp load. NOTE: set the tcp_tw_timeout below 60 seconds voilates the "quiet time" restriction, and make your system into the risk of causing some old data to be accepted as new or new data rejected as old duplicated by some receivers. Link: http://web.archive.org/web/20150102003320/http://tools.ietf.org/html/rfc793Signed-off-by: NGeorge Zhang <georgezhang@linux.alibaba.com> Signed-off-by: NJiufei Xue <jiufei.xue@linux.alibaba.com> Acked-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
- 24 5月, 2019 1 次提交
-
-
由 Caspar Zhang 提交于
lkp-build bot reported the following link error with ipv6 disabled: ld: net/hookers/hookers.o:(.data+0x40): undefined reference to `ipv6_specific' ld: net/hookers/hookers.o:(.data+0x78): undefined reference to `ipv6_mapped' ld: net/hookers/hookers.o:(.data+0xe8): undefined reference to `inet6_stream_ops' Fixed this issue by adding IS_ENABLED(CONFIG_IPV6) check. Reported-by: Nkbuild test robot <lkp@intel.com> Signed-off-by: NCaspar Zhang <caspar@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
- 23 5月, 2019 2 次提交
-
-
由 kbuild test robot 提交于
net/hookers/hookers.c:194:44-45: WARNING: Use ARRAY_SIZE Use ARRAY_SIZE instead of dividing sizeof array with sizeof an element Semantic patch information: This makes an effort to find cases where ARRAY_SIZE can be used such as where there is a division of sizeof the array by the sizeof its first element or by any indexed element or the element type. It replaces the division of the two sizeofs by ARRAY_SIZE. Generated by: scripts/coccinelle/misc/array_size.cocci [ caspar: remove redundant parentheses ] Fixes: 3c74cfbb ("net: kernel hookers service for toa module") CC: George Zhang <georgezhang@linux.alibaba.com> Signed-off-by: Nkbuild test robot <lkp@intel.com> Reviewed-by: NCaspar Zhang <caspar@linux.alibaba.com>
-
由 Caspar Zhang 提交于
read/write_cr0() are used in net/hookers.c, but they are only available on x86 platform. Adding a depend-on fields in Kconfig to disable this feature in other platforms. Reported-by: Nkbuild test robot <lkp@intel.com> Signed-off-by: NCaspar Zhang <caspar@linux.alibaba.com> Reviewed-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
-
- 16 5月, 2019 1 次提交
-
-
由 George Zhang 提交于
LVS fullnat will replace network traffic's source ip with its local ip, and thus the backend servers cannot obtain the real client ip. To solve this, LVS has introduced the tcp option address (TOA) to store the essential ip address information in the last tcp ack packet of the 3-way handshake, and the backend servers need to retrieve it from the packet header. In this patch, we have introduced the sk_toa_data member in the sock structure to hold the TOA information. There used to be an in-tree module for TOA managing, whereas it has now been maintained as an standalone module. In this case, the toa module should register its hook function(s) using the provided interfaces in the hookers module. TOA in sock structure: __be32 sk_toa_data[16]; The hookers module only provides the sk_toa_data placeholder, and the toa module can use this variable through the layout it needs. Hook interfaces: The hookers module replaces the kernel's syn_recv_sock and getname handler with a stub that chains the toa module's hook function(s) to the original handling function. The hookers module allows hook functions to be installed and uninstalled in any order. toa module: The external toa module will be provided in separate RPM package. [xuyu@linux.alibaba.com: amend commit log] Signed-off-by: NGeorge Zhang <georgezhang@linux.alibaba.com> Signed-off-by: NXu Yu <xuyu@linux.alibaba.com> Reviewed-by: NCaspar Zhang <caspar@linux.alibaba.com>
-
- 10 5月, 2019 2 次提交
-
-
由 Marcel Holtmann 提交于
commit d5bb334a8e171b262e48f378bd2096c0ea458265 upstream. The minimum encryption key size for LE connections is 56 bits and to align LE with BR/EDR, enforce 56 bits of minimum encryption key size for BR/EDR connections as well. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Young Xiao 提交于
commit a1616a5ac99ede5d605047a9012481ce7ff18b16 upstream. Struct ca is copied from userspace. It is not checked whether the "name" field is NULL terminated, which allows local users to obtain potentially sensitive information from kernel stack memory, via a HIDPCONNADD command. This vulnerability is similar to CVE-2011-1079. Signed-off-by: NYoung Xiao <YangX92@hotmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 08 5月, 2019 6 次提交
-
-
由 Alexander Wetzel 提交于
commit 78ad2341521d5ea96cb936244ed4c4c4ef9ec13b upstream. Restore SW_CRYPTO_CONTROL operation on AP_VLAN interfaces for unicast keys, the original override was intended to be done for group keys as those are treated specially by mac80211 and would always have been rejected. Now the situation is that AP_VLAN support must be enabled by the driver if it can support it (meaning it can support software crypto GTK TX). Thus, also simplify the code - if we get here with AP_VLAN and non- pairwise key, software crypto must be used (driver doesn't know about the interface) and can be used (driver must've advertised AP_VLAN if it also uses SW_CRYPTO_CONTROL). Fixes: db3bdcb9 ("mac80211: allow AP_VLAN operation on crypto controlled devices") Signed-off-by: NAlexander Wetzel <alexander@wetzel-home.de> [rewrite commit message] Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Anders Roxell 提交于
[ Upstream commit ca8c3b922e7032aff6cc3fd05548f4df1f3df90e ] When CONFIG_CFG80211 isn't enabled the compiler correcly warns about 'sinfo.pertid' may be unused. It can also happen for other error conditions that it not warn about. net/batman-adv/bat_v_elp.c: In function ‘batadv_v_elp_get_throughput.isra.0’: include/net/cfg80211.h:6370:13: warning: ‘sinfo.pertid’ may be used uninitialized in this function [-Wmaybe-uninitialized] kfree(sinfo->pertid); ~~~~~^~~~~~~~ Rework so that we only release '&sinfo' if cfg80211_get_station returns zero. Fixes: 7d652669b61d ("batman-adv: release station info tidstats") Signed-off-by: NAnders Roxell <anders.roxell@linaro.org> Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Sven Eckelmann 提交于
[ Upstream commit f131a56880d10932931e74773fb8702894a94a75 ] The batadv_hash_remove is a function which searches the hashtable for an entry using a needle, a hashtable bucket selection function and a compare function. It will lock the bucket list and delete an entry when the compare function matches it with the needle. It returns the pointer to the hlist_node which matches or NULL when no entry matches the needle. The batadv_tt_global_free is not itself protected in anyway to avoid that any other function is modifying the hashtable between the search for the entry and the call to batadv_hash_remove. It can therefore happen that the entry either doesn't exist anymore or an entry was deleted which is not the same object as the needle. In such an situation, the reference counter (for the reference stored in the hashtable) must not be reduced for the needle. Instead the reference counter of the actually removed entry has to be reduced. Otherwise the reference counter will underflow and the object might be freed before all its references were dropped. The kref helpers reported this problem as: refcount_t: underflow; use-after-free. Fixes: 7683fdc1 ("batman-adv: protect the local and the global trans-tables with rcu") Reported-by: NMartin Weinelt <martin@linuxlounge.net> Signed-off-by: NSven Eckelmann <sven@narfation.org> Acked-by: NAntonio Quartulli <a@unstable.cc> Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Sven Eckelmann 提交于
[ Upstream commit 3d65b9accab4a7ed5038f6df403fbd5e298398c7 ] The batadv_hash_remove is a function which searches the hashtable for an entry using a needle, a hashtable bucket selection function and a compare function. It will lock the bucket list and delete an entry when the compare function matches it with the needle. It returns the pointer to the hlist_node which matches or NULL when no entry matches the needle. The batadv_tt_local_remove is not itself protected in anyway to avoid that any other function is modifying the hashtable between the search for the entry and the call to batadv_hash_remove. It can therefore happen that the entry either doesn't exist anymore or an entry was deleted which is not the same object as the needle. In such an situation, the reference counter (for the reference stored in the hashtable) must not be reduced for the needle. Instead the reference counter of the actually removed entry has to be reduced. Otherwise the reference counter will underflow and the object might be freed before all its references were dropped. The kref helpers reported this problem as: refcount_t: underflow; use-after-free. Fixes: ef72706a ("batman-adv: protect tt_local_entry from concurrent delete events") Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Sven Eckelmann 提交于
[ Upstream commit 4ba104f468bbfc27362c393815d03aa18fb7a20f ] The batadv_hash_remove is a function which searches the hashtable for an entry using a needle, a hashtable bucket selection function and a compare function. It will lock the bucket list and delete an entry when the compare function matches it with the needle. It returns the pointer to the hlist_node which matches or NULL when no entry matches the needle. The batadv_bla_del_claim is not itself protected in anyway to avoid that any other function is modifying the hashtable between the search for the entry and the call to batadv_hash_remove. It can therefore happen that the entry either doesn't exist anymore or an entry was deleted which is not the same object as the needle. In such an situation, the reference counter (for the reference stored in the hashtable) must not be reduced for the needle. Instead the reference counter of the actually removed entry has to be reduced. Otherwise the reference counter will underflow and the object might be freed before all its references were dropped. The kref helpers reported this problem as: refcount_t: underflow; use-after-free. Fixes: 23721387 ("batman-adv: add basic bridge loop avoidance code") Signed-off-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de> Signed-off-by: NSasha Levin <sashal@kernel.org>
-
由 Johannes Berg 提交于
commit 517879147493a5e1df6b89a50f708f1133fcaddb upstream. We need to dereference the directory to get its parent to be able to rename it, so it's clearly not safe to try to do this with ERR_PTR() pointers. Skip in this case. It seems that this is most likely what was causing the report by syzbot, but I'm not entirely sure as it didn't come with a reproducer this time. Cc: stable@vger.kernel.org Reported-by: syzbot+4ece1a28b8f4730547c9@syzkaller.appspotmail.com Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 05 5月, 2019 13 次提交
-
-
由 Jakub Kicinski 提交于
[ Upstream commit eb3d38d5adb520435d4e4af32529ccb13ccc9935 ] Fragments may contain data from other records so we have to account for that when we calculate the destination and max length of copy we can perform. Note that 'offset' is the offset within the message, so it can't be passed as offset within the frag.. Here skb_store_bits() would have realised the call is wrong and simply not copy data. Fixes: 4799ac81 ("tls: Add rx inline crypto offload") Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NJohn Hurley <john.hurley@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jakub Kicinski 提交于
[ Upstream commit 97e1caa517e22d62a283b876fb8aa5f4672c83dd ] There is no guarantee the record starts before the skb frags. If we don't check for this condition copy amount will get negative, leading to reads and writes to random memory locations. Familiar hilarity ensues. Fixes: 4799ac81 ("tls: Add rx inline crypto offload") Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NJohn Hurley <john.hurley@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Willem de Bruijn 提交于
[ Upstream commit 486efdc8f6ce802b27e15921d2353cc740c55451 ] Packet sockets in datagram mode take a destination address. Verify its length before passing to dev_hard_header. Prior to 2.6.14-rc3, the send code ignored sll_halen. This is established behavior. Directly compare msg_namelen to dev->addr_len. Change v1->v2: initialize addr in all paths Fixes: 6b8d95f1795c4 ("packet: validate address length if non-zero") Suggested-by: NDavid Laight <David.Laight@aculab.com> Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Xin Long 提交于
[ Upstream commit fbd019737d71e405f86549fd738f81e2ff3dd073 ] Ying triggered a call trace when doing an asconf testing: BUG: scheduling while atomic: swapper/12/0/0x10000100 Call Trace: <IRQ> [<ffffffffa4375904>] dump_stack+0x19/0x1b [<ffffffffa436fcaf>] __schedule_bug+0x64/0x72 [<ffffffffa437b93a>] __schedule+0x9ba/0xa00 [<ffffffffa3cd5326>] __cond_resched+0x26/0x30 [<ffffffffa437bc4a>] _cond_resched+0x3a/0x50 [<ffffffffa3e22be8>] kmem_cache_alloc_node+0x38/0x200 [<ffffffffa423512d>] __alloc_skb+0x5d/0x2d0 [<ffffffffc0995320>] sctp_packet_transmit+0x610/0xa20 [sctp] [<ffffffffc098510e>] sctp_outq_flush+0x2ce/0xc00 [sctp] [<ffffffffc098646c>] sctp_outq_uncork+0x1c/0x20 [sctp] [<ffffffffc0977338>] sctp_cmd_interpreter.isra.22+0xc8/0x1460 [sctp] [<ffffffffc0976ad1>] sctp_do_sm+0xe1/0x350 [sctp] [<ffffffffc099443d>] sctp_primitive_ASCONF+0x3d/0x50 [sctp] [<ffffffffc0977384>] sctp_cmd_interpreter.isra.22+0x114/0x1460 [sctp] [<ffffffffc0976ad1>] sctp_do_sm+0xe1/0x350 [sctp] [<ffffffffc097b3a4>] sctp_assoc_bh_rcv+0xf4/0x1b0 [sctp] [<ffffffffc09840f1>] sctp_inq_push+0x51/0x70 [sctp] [<ffffffffc099732b>] sctp_rcv+0xa8b/0xbd0 [sctp] As it shows, the first sctp_do_sm() running under atomic context (NET_RX softirq) invoked sctp_primitive_ASCONF() that uses GFP_KERNEL flag later, and this flag is supposed to be used in non-atomic context only. Besides, sctp_do_sm() was called recursively, which is not expected. Vlad tried to fix this recursive call in Commit c0786693 ("sctp: Fix oops when sending queued ASCONF chunks") by introducing a new command SCTP_CMD_SEND_NEXT_ASCONF. But it didn't work as this command is still used in the first sctp_do_sm() call, and sctp_primitive_ASCONF() will be called in this command again. To avoid calling sctp_do_sm() recursively, we send the next queued ASCONF not by sctp_primitive_ASCONF(), but by sctp_sf_do_prm_asconf() in the 1st sctp_do_sm() directly. Reported-by: NYing Xu <yinxu@redhat.com> Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 David Howells 提交于
[ Upstream commit b13023421b5179413421333f602850914f6a7ad8 ] In rxrpc_destroy_all_calls(), there are two phases: (1) make sure the ->calls list is empty, emitting error messages if not, and (2) wait for the RCU cleanup to happen on outstanding calls (ie. ->nr_calls becomes 0). To avoid taking the call_lock, the function prechecks ->calls and if empty, it returns to avoid taking the lock - this is wrong, however: it still needs to go and do the second phase and wait for ->nr_calls to become 0. Without this, the rxrpc_net struct may get deallocated before we get to the RCU cleanup for the last calls. This can lead to: Slab corruption (Not tainted): kmalloc-16k start=ffff88802b178000, len=16384 050: 6b 6b 6b 6b 6b 6b 6b 6b 61 6b 6b 6b 6b 6b 6b 6b kkkkkkkkakkkkkkk Note the "61" at offset 0x58. This corresponds to the ->nr_calls member of struct rxrpc_net (which is >9k in size, and thus allocated out of the 16k slab). Fix this by flipping the condition on the if-statement, putting the locked section inside the if-body and dropping the return from there. The function will then always go on to wait for the RCU cleanup on outstanding calls. Fixes: 2baec2c3 ("rxrpc: Support network namespacing") Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jakub Kicinski 提交于
[ Upstream commit 2dcb003314032c6efb13a065ffae60d164b2dd35 ] update_chksum() accesses nskb->sk before it has been set by complete_skb(), move the init up. Fixes: e8f69799 ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NSimon Horman <simon.horman@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Eric Dumazet 提交于
[ Upstream commit c1c477217882c610a2ba0268f5faf36c9c092528 ] Canonical way to fetch sk_user_data from an encap_rcv() handler called from UDP stack in rcu protected section is to use rcu_dereference_sk_user_data(), otherwise compiler might read it multiple times. Fixes: d00fa9ad ("il2tp: fix races with tunnel socket close") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: James Chapman <jchapman@katalix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Eric Dumazet 提交于
[ Upstream commit a622b40035d16196bf19b2b33b854862595245fc ] Before taking a refcount on a rcu protected structure, we need to make sure the refcount is not zero. syzbot reported : refcount_t: increment on 0; use-after-free. WARNING: CPU: 1 PID: 23533 at lib/refcount.c:156 refcount_inc_checked lib/refcount.c:156 [inline] WARNING: CPU: 1 PID: 23533 at lib/refcount.c:156 refcount_inc_checked+0x61/0x70 lib/refcount.c:154 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 23533 Comm: syz-executor.2 Not tainted 5.1.0-rc7+ #93 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 panic+0x2cb/0x65c kernel/panic.c:214 __warn.cold+0x20/0x45 kernel/panic.c:571 report_bug+0x263/0x2b0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:179 [inline] fixup_bug arch/x86/kernel/traps.c:174 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:272 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:291 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973 RIP: 0010:refcount_inc_checked lib/refcount.c:156 [inline] RIP: 0010:refcount_inc_checked+0x61/0x70 lib/refcount.c:154 Code: 1d 98 2b 2a 06 31 ff 89 de e8 db 2c 40 fe 84 db 75 dd e8 92 2b 40 fe 48 c7 c7 20 7a a1 87 c6 05 78 2b 2a 06 01 e8 7d d9 12 fe <0f> 0b eb c1 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 41 57 41 RSP: 0018:ffff888069f0fba8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 000000000000f353 RSI: ffffffff815afcb6 RDI: ffffed100d3e1f67 RBP: ffff888069f0fbb8 R08: ffff88809b1845c0 R09: ffffed1015d23ef1 R10: ffffed1015d23ef0 R11: ffff8880ae91f787 R12: ffff8880a8f26968 R13: 0000000000000004 R14: dffffc0000000000 R15: ffff8880a49a6440 l2tp_tunnel_inc_refcount net/l2tp/l2tp_core.h:240 [inline] l2tp_tunnel_get+0x250/0x580 net/l2tp/l2tp_core.c:173 pppol2tp_connect+0xc00/0x1c70 net/l2tp/l2tp_ppp.c:702 __sys_connect+0x266/0x330 net/socket.c:1808 __do_sys_connect net/socket.c:1819 [inline] __se_sys_connect net/socket.c:1816 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1816 Fixes: 54652eb1 ("l2tp: hold tunnel while looking up sessions in l2tp_netlink") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: Nsyzbot <syzkaller@googlegroups.com> Cc: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Willem de Bruijn 提交于
[ Upstream commit 95c169251bf734aa555a1e8043e4d88ec97a04ec ] A request for a flowlabel fails in process or user exclusive mode must fail if the caller pid or uid does not match. Invert the test. Previously, the test was unsafe wrt PID recycling, but indeed tested for inequality: fl1->owner != fl->owner Fixes: 4f82f457 ("net ip6 flowlabel: Make owner a union of struct pid* and kuid_t") Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Eric Dumazet 提交于
[ Upstream commit 6c0afef5fb0c27758f4d52b2210c61b6bd8b4470 ] syzbot was able to catch a use-after-free read in pid_nr_ns() [1] ip6fl_seq_show() seems to use RCU protection, dereferencing fl->owner.pid but fl_free() releases fl->owner.pid before rcu grace period is started. [1] BUG: KASAN: use-after-free in pid_nr_ns+0x128/0x140 kernel/pid.c:407 Read of size 4 at addr ffff888094012a04 by task syz-executor.0/18087 CPU: 0 PID: 18087 Comm: syz-executor.0 Not tainted 5.1.0-rc6+ #89 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_load4_noabort+0x14/0x20 mm/kasan/generic_report.c:131 pid_nr_ns+0x128/0x140 kernel/pid.c:407 ip6fl_seq_show+0x2f8/0x4f0 net/ipv6/ip6_flowlabel.c:794 seq_read+0xad3/0x1130 fs/seq_file.c:268 proc_reg_read+0x1fe/0x2c0 fs/proc/inode.c:227 do_loop_readv_writev fs/read_write.c:701 [inline] do_loop_readv_writev fs/read_write.c:688 [inline] do_iter_read+0x4a9/0x660 fs/read_write.c:922 vfs_readv+0xf0/0x160 fs/read_write.c:984 kernel_readv fs/splice.c:358 [inline] default_file_splice_read+0x475/0x890 fs/splice.c:413 do_splice_to+0x12a/0x190 fs/splice.c:876 splice_direct_to_actor+0x2d2/0x970 fs/splice.c:953 do_splice_direct+0x1da/0x2a0 fs/splice.c:1062 do_sendfile+0x597/0xd00 fs/read_write.c:1443 __do_sys_sendfile64 fs/read_write.c:1498 [inline] __se_sys_sendfile64 fs/read_write.c:1490 [inline] __x64_sys_sendfile64+0x15a/0x220 fs/read_write.c:1490 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458da9 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f300d24bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 0000000000458da9 RDX: 00000000200000c0 RSI: 0000000000000008 RDI: 0000000000000007 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000005a R11: 0000000000000246 R12: 00007f300d24c6d4 R13: 00000000004c5fa3 R14: 00000000004da748 R15: 00000000ffffffff Allocated by task 17543: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_kmalloc mm/kasan/common.c:497 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:470 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:505 slab_post_alloc_hook mm/slab.h:437 [inline] slab_alloc mm/slab.c:3393 [inline] kmem_cache_alloc+0x11a/0x6f0 mm/slab.c:3555 alloc_pid+0x55/0x8f0 kernel/pid.c:168 copy_process.part.0+0x3b08/0x7980 kernel/fork.c:1932 copy_process kernel/fork.c:1709 [inline] _do_fork+0x257/0xfd0 kernel/fork.c:2226 __do_sys_clone kernel/fork.c:2333 [inline] __se_sys_clone kernel/fork.c:2327 [inline] __x64_sys_clone+0xbf/0x150 kernel/fork.c:2327 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 7789: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:459 kasan_slab_free+0xe/0x10 mm/kasan/common.c:467 __cache_free mm/slab.c:3499 [inline] kmem_cache_free+0x86/0x260 mm/slab.c:3765 put_pid.part.0+0x111/0x150 kernel/pid.c:111 put_pid+0x20/0x30 kernel/pid.c:105 fl_free+0xbe/0xe0 net/ipv6/ip6_flowlabel.c:102 ip6_fl_gc+0x295/0x3e0 net/ipv6/ip6_flowlabel.c:152 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:293 The buggy address belongs to the object at ffff888094012a00 which belongs to the cache pid_2 of size 88 The buggy address is located 4 bytes inside of 88-byte region [ffff888094012a00, ffff888094012a58) The buggy address belongs to the page: page:ffffea0002500480 count:1 mapcount:0 mapping:ffff88809a483080 index:0xffff888094012980 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea00018a3508 ffffea0002524a88 ffff88809a483080 raw: ffff888094012980 ffff888094012000 000000010000001b 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888094012900: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ffff888094012980: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc >ffff888094012a00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ^ ffff888094012a80: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc ffff888094012b00: fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc Fixes: 4f82f457 ("net ip6 flowlabel: Make owner a union of struct pid * and kuid_t") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Reported-by: Nsyzbot <syzkaller@googlegroups.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Eric Dumazet 提交于
[ Upstream commit 0e2338749192ce0e52e7174c5352f627632f478a ] We had many syzbot reports that seem to be caused by use-after-free of struct fib6_info. ip6_dst_destroy(), fib6_drop_pcpu_from() and rt6_remove_exception() are writers vs rt->from, and use non consistent synchronization among themselves. Switching to xchg() will solve the issues with no possible lockdep issues. BUG: KASAN: user-memory-access in atomic_dec_and_test include/asm-generic/atomic-instrumented.h:747 [inline] BUG: KASAN: user-memory-access in fib6_info_release include/net/ip6_fib.h:294 [inline] BUG: KASAN: user-memory-access in fib6_info_release include/net/ip6_fib.h:292 [inline] BUG: KASAN: user-memory-access in fib6_drop_pcpu_from net/ipv6/ip6_fib.c:927 [inline] BUG: KASAN: user-memory-access in fib6_purge_rt+0x4f6/0x670 net/ipv6/ip6_fib.c:960 Write of size 4 at addr 0000000000ffffb4 by task syz-executor.1/7649 CPU: 0 PID: 7649 Comm: syz-executor.1 Not tainted 5.1.0-rc6+ #183 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 kasan_report.cold+0x5/0x40 mm/kasan/report.c:321 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 kasan_check_write+0x14/0x20 mm/kasan/common.c:108 atomic_dec_and_test include/asm-generic/atomic-instrumented.h:747 [inline] fib6_info_release include/net/ip6_fib.h:294 [inline] fib6_info_release include/net/ip6_fib.h:292 [inline] fib6_drop_pcpu_from net/ipv6/ip6_fib.c:927 [inline] fib6_purge_rt+0x4f6/0x670 net/ipv6/ip6_fib.c:960 fib6_del_route net/ipv6/ip6_fib.c:1813 [inline] fib6_del+0xac2/0x10a0 net/ipv6/ip6_fib.c:1844 fib6_clean_node+0x3a8/0x590 net/ipv6/ip6_fib.c:2006 fib6_walk_continue+0x495/0x900 net/ipv6/ip6_fib.c:1928 fib6_walk+0x9d/0x100 net/ipv6/ip6_fib.c:1976 fib6_clean_tree+0xe0/0x120 net/ipv6/ip6_fib.c:2055 __fib6_clean_all+0x118/0x2a0 net/ipv6/ip6_fib.c:2071 fib6_clean_all+0x2b/0x40 net/ipv6/ip6_fib.c:2082 rt6_sync_down_dev+0x134/0x150 net/ipv6/route.c:4057 rt6_disable_ip+0x27/0x5f0 net/ipv6/route.c:4062 addrconf_ifdown+0xa2/0x1220 net/ipv6/addrconf.c:3705 addrconf_notify+0x19a/0x2260 net/ipv6/addrconf.c:3630 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1753 call_netdevice_notifiers_extack net/core/dev.c:1765 [inline] call_netdevice_notifiers net/core/dev.c:1779 [inline] dev_close_many+0x33f/0x6f0 net/core/dev.c:1522 rollback_registered_many+0x43b/0xfd0 net/core/dev.c:8177 rollback_registered+0x109/0x1d0 net/core/dev.c:8242 unregister_netdevice_queue net/core/dev.c:9289 [inline] unregister_netdevice_queue+0x1ee/0x2c0 net/core/dev.c:9282 unregister_netdevice include/linux/netdevice.h:2658 [inline] __tun_detach+0xd5b/0x1000 drivers/net/tun.c:727 tun_detach drivers/net/tun.c:744 [inline] tun_chr_close+0xe0/0x180 drivers/net/tun.c:3443 __fput+0x2e5/0x8d0 fs/file_table.c:278 ____fput+0x16/0x20 fs/file_table.c:309 task_work_run+0x14a/0x1c0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x90a/0x2fa0 kernel/exit.c:876 do_group_exit+0x135/0x370 kernel/exit.c:980 __do_sys_exit_group kernel/exit.c:991 [inline] __se_sys_exit_group kernel/exit.c:989 [inline] __x64_sys_exit_group+0x44/0x50 kernel/exit.c:989 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458da9 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffeafc2a6a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 000000000000001c RCX: 0000000000458da9 RDX: 0000000000412a80 RSI: 0000000000a54ef0 RDI: 0000000000000043 RBP: 00000000004be552 R08: 000000000000000c R09: 000000000004c0d1 R10: 0000000002341940 R11: 0000000000000246 R12: 00000000ffffffff R13: 00007ffeafc2a7f0 R14: 000000000004c065 R15: 00007ffeafc2a800 Fixes: a68886a6 ("net/ipv6: Make from in rt6_info rcu protected") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: Nsyzbot <syzkaller@googlegroups.com> Cc: David Ahern <dsahern@gmail.com> Reviewed-by: NDavid Ahern <dsahern@gmail.com> Acked-by: NMartin KaFai Lau <kafai@fb.com> Acked-by: NWei Wang <weiwan@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Martin KaFai Lau 提交于
[ Upstream commit 886b7a50100a50f1cbd08a6f8ec5884dfbe082dc ] It is a followup after the fix in commit 9c69a1320515 ("route: Avoid crash from dereferencing NULL rt->from") rt6_do_redirect(): 1. NULL checking is needed on rt->from because a parallel fib6_info delete could happen that sets rt->from to NULL. (e.g. rt6_remove_exception() and fib6_drop_pcpu_from()). 2. fib6_info_hold() is not enough. Same reason as (1). Meaning, holding dst->__refcnt cannot ensure rt->from is not NULL or rt->from->fib6_ref is not 0. Instead of using fib6_info_hold_safe() which ip6_rt_cache_alloc() is already doing, this patch chooses to extend the rcu section to keep "from" dereference-able after checking for NULL. inet6_rtm_getroute(): 1. NULL checking is also needed on rt->from for a similar reason. Note that inet6_rtm_getroute() is using RTNL_FLAG_DOIT_UNLOCKED. Fixes: a68886a6 ("net/ipv6: Make from in rt6_info rcu protected") Signed-off-by: NMartin KaFai Lau <kafai@fb.com> Acked-by: NWei Wang <weiwan@google.com> Reviewed-by: NDavid Ahern <dsahern@gmail.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Shmulik Ladkani 提交于
[ Upstream commit d2f0c961148f65bc73eda72b9fa3a4e80973cb49 ] Previously, during fragmentation after forwarding, skb->skb_iif isn't preserved, i.e. 'ip_copy_metadata' does not copy skb_iif from given 'from' skb. As a result, ip_do_fragment's creates fragments with zero skb_iif, leading to inconsistent behavior. Assume for example an eBPF program attached at tc egress (post forwarding) that examines __sk_buff->ingress_ifindex: - the correct iif is observed if forwarding path does not involve fragmentation/refragmentation - a bogus iif is observed if forwarding path involves fragmentation/refragmentatiom Fix, by preserving skb_iif during 'ip_copy_metadata'. Signed-off-by: NShmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 04 5月, 2019 5 次提交
-
-
由 Kangjie Lu 提交于
[ Upstream commit 6d65561f3d5ec933151939c543d006b79044e7a6 ] skb_header_pointer may return NULL. The current code dereference its return values without a NULL check. The fix inserts the checks to avoid NULL pointer dereferences. Fixes: 202a8ff5 ("netfilter: add IPv6 segment routing header 'srh' match") Signed-off-by: NKangjie Lu <kjlu@umn.edu> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NSasha Levin (Microsoft) <sashal@kernel.org>
-
由 Arnd Bergmann 提交于
[ Upstream commit d1fa381033eb718df5c602f64b6e88676138dfc6 ] With NETFILTER_XT_TARGET_TEE=y and IP6_NF_IPTABLES=m, we get a link error when referencing the NF_DUP_IPV6 module: net/netfilter/xt_TEE.o: In function `tee_tg6': xt_TEE.c:(.text+0x14): undefined reference to `nf_dup_ipv6' The problem here is the 'select NF_DUP_IPV6 if IP6_NF_IPTABLES' that forces NF_DUP_IPV6 to be =m as well rather than setting it to =y as was intended here. Adding a soft dependency on IP6_NF_IPTABLES avoids that broken configuration. Fixes: 5d400a49 ("netfilter: Kconfig: Change select IPv6 dependencies") Cc: Máté Eckl <ecklm94@gmail.com> Cc: Taehee Yoo <ap420073@gmail.com> Link: https://patchwork.ozlabs.org/patch/999498/ Link: https://lore.kernel.org/patchwork/patch/960062/Reported-by: NRandy Dunlap <rdunlap@infradead.org> Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NSasha Levin (Microsoft) <sashal@kernel.org>
-
由 Xin Long 提交于
[ Upstream commit e166e4fdaced850bee3d5ee12a5740258fb30587 ] Since Commit 21d1196a ("ipv4: set transport header earlier"), skb->transport_header has been always set before entering INET netfilter. This patch is to set skb->transport_header for bridge before entering INET netfilter by bridge-nf-call-iptables. It also fixes an issue that sctp_error() couldn't compute a right csum due to unset skb->transport_header. Fixes: e6d8b64b ("net: sctp: fix and consolidate SCTP checksumming code") Reported-by: NLi Shuang <shuali@redhat.com> Suggested-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Acked-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NSasha Levin (Microsoft) <sashal@kernel.org>
-
由 Pablo Neira Ayuso 提交于
[ Upstream commit 05b7639da55f5555b9866a1f4b7e8995232a6323 ] Otherwise, we hit bogus ENOENT when removing elements. Fixes: e701001e ("netfilter: nft_rbtree: allow adjacent intervals with dynamic updates") Reported-by: NVáclav Zindulka <vaclav.zindulka@tlapnet.cz> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NSasha Levin (Microsoft) <sashal@kernel.org>
-
由 Björn Töpel 提交于
[ Upstream commit 044175a06706d516aa42874bb44dbbfc3c4d20eb ] When the umem is cleaned up, the task that created it might already be gone. If the task was gone, the xdp_umem_release function did not free the pages member of struct xdp_umem. It turned out that the task lookup was not needed at all; The code was a left-over when we moved from task accounting to user accounting [1]. This patch fixes the memory leak by removing the task lookup logic completely. [1] https://lore.kernel.org/netdev/20180131135356.19134-3-bjorn.topel@gmail.com/ Link: https://lore.kernel.org/netdev/c1cb2ca8-6a14-3980-8672-f3de0bb38dfd@suse.cz/ Fixes: c0c77d8f ("xsk: add user memory registration support sockopt") Reported-by: NJiri Slaby <jslaby@suse.cz> Signed-off-by: NBjörn Töpel <bjorn.topel@intel.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NSasha Levin (Microsoft) <sashal@kernel.org>
-
- 02 5月, 2019 9 次提交
-
-
由 Jakub Kicinski 提交于
[ Upstream commit 12c7686111326148b4b5db189130522a4ad1be4a ] When device refuses the offload in tls_set_device_offload_rx() it calls tls_sw_free_resources_rx() to clean up software context state. Unfortunately, tls_sw_free_resources_rx() does not free all the state tls_set_sw_offload() allocated - it leaks IV and sequence number buffers. All other code paths which lead to tls_sw_release_resources_rx() (which tls_sw_free_resources_rx() calls) free those right before the call. Avoid the leak by moving freeing of iv and rec_seq into tls_sw_release_resources_rx(). Fixes: 4799ac81 ("tls: Add rx inline crypto offload") Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jakub Kicinski 提交于
[ Upstream commit 62ef81d5632634d5e310ed25b9b940b2b6612b46 ] If device supports offload, but offload fails tls_set_device_offload_rx() will call tls_sw_free_resources_rx() which (unhelpfully) releases and reacquires the socket lock. For a small fix release and reacquire the device_offload_lock. Fixes: 4799ac81 ("tls: Add rx inline crypto offload") Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jakub Kicinski 提交于
[ Upstream commit 9188d5ca454fd665145904267e726e9e8d122f5c ] Unlike atomic_add(), refcount_add() does not deal well with a negative argument. TLS fallback code reallocates the skb and is very likely to shrink the truesize, leading to: [ 189.513254] WARNING: CPU: 5 PID: 0 at lib/refcount.c:81 refcount_add_not_zero_checked+0x15c/0x180 Call Trace: refcount_add_checked+0x6/0x40 tls_enc_skb+0xb93/0x13e0 [tls] Once wmem_allocated count saturates the application can no longer send data on the socket. This is similar to Eric's fixes for GSO, TCP: commit 7ec318fe ("tcp: gso: avoid refcount_t warning from tcp_gso_segment()") and UDP: commit 575b65bc ("udp: avoid refcount_t saturation in __udp_gso_segment()"). Unlike the GSO case, for TLS fallback it's likely that the skb has shrunk, so the "likely" annotation is the other way around (likely branch being "sub"). Fixes: e8f69799 ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NJohn Hurley <john.hurley@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Eric Dumazet 提交于
[ Upstream commit 0453c682459583910d611a96de928f4442205493 ] This patch adds a limit on the number of skbs that fuzzers can queue into loopback_queue. 1000 packets for rose loopback seems more than enough. Then, since we now have multiple cpus in most linux hosts, we also need to limit the number of skbs rose_loopback_timer() can dequeue at each round. rose_loopback_queue() can be drop-monitor friendly, calling consume_skb() or kfree_skb() appropriately. Finally, use mod_timer() instead of del_timer() + add_timer() syzbot report was : rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-...!: (10499 ticks this GP) idle=536/1/0x4000000000000002 softirq=103291/103291 fqs=34 rcu: (t=10500 jiffies g=140321 q=323) rcu: rcu_preempt kthread starved for 10426 jiffies! g140321 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=1 rcu: RCU grace-period kthread stack dump: rcu_preempt I29168 10 2 0x80000000 Call Trace: context_switch kernel/sched/core.c:2877 [inline] __schedule+0x813/0x1cc0 kernel/sched/core.c:3518 schedule+0x92/0x180 kernel/sched/core.c:3562 schedule_timeout+0x4db/0xfd0 kernel/time/timer.c:1803 rcu_gp_fqs_loop kernel/rcu/tree.c:1971 [inline] rcu_gp_kthread+0x962/0x17b0 kernel/rcu/tree.c:2128 kthread+0x357/0x430 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 NMI backtrace for cpu 0 CPU: 0 PID: 7632 Comm: kworker/0:4 Not tainted 5.1.0-rc5+ #172 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events iterate_cleanup_work Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 nmi_cpu_backtrace.cold+0x63/0xa4 lib/nmi_backtrace.c:101 nmi_trigger_cpumask_backtrace+0x1be/0x236 lib/nmi_backtrace.c:62 arch_trigger_cpumask_backtrace+0x14/0x20 arch/x86/kernel/apic/hw_nmi.c:38 trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline] rcu_dump_cpu_stacks+0x183/0x1cf kernel/rcu/tree.c:1223 print_cpu_stall kernel/rcu/tree.c:1360 [inline] check_cpu_stall kernel/rcu/tree.c:1434 [inline] rcu_pending kernel/rcu/tree.c:3103 [inline] rcu_sched_clock_irq.cold+0x500/0xa4a kernel/rcu/tree.c:2544 update_process_times+0x32/0x80 kernel/time/timer.c:1635 tick_sched_handle+0xa2/0x190 kernel/time/tick-sched.c:161 tick_sched_timer+0x47/0x130 kernel/time/tick-sched.c:1271 __run_hrtimer kernel/time/hrtimer.c:1389 [inline] __hrtimer_run_queues+0x33e/0xde0 kernel/time/hrtimer.c:1451 hrtimer_interrupt+0x314/0x770 kernel/time/hrtimer.c:1509 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1035 [inline] smp_apic_timer_interrupt+0x120/0x570 arch/x86/kernel/apic/apic.c:1060 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807 RIP: 0010:__sanitizer_cov_trace_pc+0x0/0x50 kernel/kcov.c:95 Code: 89 25 b4 6e ec 08 41 bc f4 ff ff ff e8 cd 5d ea ff 48 c7 05 9e 6e ec 08 00 00 00 00 e9 a4 e9 ff ff 90 90 90 90 90 90 90 90 90 <55> 48 89 e5 48 8b 75 08 65 48 8b 04 25 00 ee 01 00 65 8b 15 c8 60 RSP: 0018:ffff8880ae807ce0 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13 RAX: ffff88806fd40640 RBX: dffffc0000000000 RCX: ffffffff863fbc56 RDX: 0000000000000100 RSI: ffffffff863fbc1d RDI: ffff88808cf94228 RBP: ffff8880ae807d10 R08: ffff88806fd40640 R09: ffffed1015d00f8b R10: ffffed1015d00f8a R11: 0000000000000003 R12: ffff88808cf941c0 R13: 00000000fffff034 R14: ffff8882166cd840 R15: 0000000000000000 rose_loopback_timer+0x30d/0x3f0 net/rose/rose_loopback.c:91 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:293 do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1027 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: Nsyzbot <syzkaller@googlegroups.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Zhu Yanjun 提交于
[ Upstream commit 4b9fc7146249a6e0e3175d0acc033fdcd2bfcb17 ] Before the commit 490ea596 ("RDS: IB: move FMR code to its own file"), when the dirty_count is greater than 9/10 of max_items of 8K pool, 1M pool is used, Vice versa. After the commit 490ea596 ("RDS: IB: move FMR code to its own file"), the above is removed. When we make the following tests. Server: rds-stress -r 1.1.1.16 -D 1M Client: rds-stress -r 1.1.1.14 -s 1.1.1.16 -D 1M The following will appear. " connecting to 1.1.1.16:4000 negotiated options, tasks will start in 2 seconds Starting up..header from 1.1.1.166:4001 to id 4001 bogus .. tsks tx/s rx/s tx+rx K/s mbi K/s mbo K/s tx us/c rtt us cpu % 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 ... " So this exchange between 8K and 1M pool is added back. Fixes: commit 490ea596 ("RDS: IB: move FMR code to its own file") Signed-off-by: NZhu Yanjun <yanjun.zhu@oracle.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 ZhangXiaoxu 提交于
[ Upstream commit 19fad20d15a6494f47f85d869f00b11343ee5c78 ] There is a UBSAN report as below: UBSAN: Undefined behaviour in net/ipv4/tcp_input.c:2877:56 signed integer overflow: 2147483647 * 1000 cannot be represented in type 'int' CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.1.0-rc4-00058-g582549e #1 Call Trace: <IRQ> dump_stack+0x8c/0xba ubsan_epilogue+0x11/0x60 handle_overflow+0x12d/0x170 ? ttwu_do_wakeup+0x21/0x320 __ubsan_handle_mul_overflow+0x12/0x20 tcp_ack_update_rtt+0x76c/0x780 tcp_clean_rtx_queue+0x499/0x14d0 tcp_ack+0x69e/0x1240 ? __wake_up_sync_key+0x2c/0x50 ? update_group_capacity+0x50/0x680 tcp_rcv_established+0x4e2/0xe10 tcp_v4_do_rcv+0x22b/0x420 tcp_v4_rcv+0xfe8/0x1190 ip_protocol_deliver_rcu+0x36/0x180 ip_local_deliver+0x15b/0x1a0 ip_rcv+0xac/0xd0 __netif_receive_skb_one_core+0x7f/0xb0 __netif_receive_skb+0x33/0xc0 netif_receive_skb_internal+0x84/0x1c0 napi_gro_receive+0x2a0/0x300 receive_buf+0x3d4/0x2350 ? detach_buf_split+0x159/0x390 virtnet_poll+0x198/0x840 ? reweight_entity+0x243/0x4b0 net_rx_action+0x25c/0x770 __do_softirq+0x19b/0x66d irq_exit+0x1eb/0x230 do_IRQ+0x7a/0x150 common_interrupt+0xf/0xf </IRQ> It can be reproduced by: echo 2147483647 > /proc/sys/net/ipv4/tcp_min_rtt_wlen Fixes: f6722583 ("tcp: track min RTT using windowed min-filter") Signed-off-by: NZhangXiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Eric Dumazet 提交于
[ Upstream commit 20ff83f10f113c88d0bb74589389b05250994c16 ] Before calling __ip_options_compile(), we need to ensure the network header is a an IPv4 one, and that it is already pulled in skb->head. RAW sockets going through a tunnel can end up calling ipv4_link_failure() with total garbage in the skb, or arbitrary lengthes. syzbot report : BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:355 [inline] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 Write of size 69 at addr ffff888096abf068 by task syz-executor.4/9204 CPU: 0 PID: 9204 Comm: syz-executor.4 Not tainted 5.1.0-rc5+ #77 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 memcpy+0x38/0x50 mm/kasan/common.c:133 memcpy include/linux/string.h:355 [inline] __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 __icmp_send+0x725/0x1400 net/ipv4/icmp.c:695 ipv4_link_failure+0x29f/0x550 net/ipv4/route.c:1204 dst_link_failure include/net/dst.h:427 [inline] vti6_xmit net/ipv6/ip6_vti.c:514 [inline] vti6_tnl_xmit+0x10d4/0x1c0c net/ipv6/ip6_vti.c:553 __netdev_start_xmit include/linux/netdevice.h:4414 [inline] netdev_start_xmit include/linux/netdevice.h:4423 [inline] xmit_one net/core/dev.c:3292 [inline] dev_hard_start_xmit+0x1b2/0x980 net/core/dev.c:3308 __dev_queue_xmit+0x271d/0x3060 net/core/dev.c:3878 dev_queue_xmit+0x18/0x20 net/core/dev.c:3911 neigh_direct_output+0x16/0x20 net/core/neighbour.c:1527 neigh_output include/net/neighbour.h:508 [inline] ip_finish_output2+0x949/0x1740 net/ipv4/ip_output.c:229 ip_finish_output+0x73c/0xd50 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:278 [inline] ip_output+0x21f/0x670 net/ipv4/ip_output.c:405 dst_output include/net/dst.h:444 [inline] NF_HOOK include/linux/netfilter.h:289 [inline] raw_send_hdrinc net/ipv4/raw.c:432 [inline] raw_sendmsg+0x1d2b/0x2f20 net/ipv4/raw.c:663 inet_sendmsg+0x147/0x5d0 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:661 sock_write_iter+0x27c/0x3e0 net/socket.c:988 call_write_iter include/linux/fs.h:1866 [inline] new_sync_write+0x4c7/0x760 fs/read_write.c:474 __vfs_write+0xe4/0x110 fs/read_write.c:487 vfs_write+0x20c/0x580 fs/read_write.c:549 ksys_write+0x14f/0x2d0 fs/read_write.c:599 __do_sys_write fs/read_write.c:611 [inline] __se_sys_write fs/read_write.c:608 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:608 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458c29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f293b44bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458c29 RDX: 0000000000000014 RSI: 00000000200002c0 RDI: 0000000000000003 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f293b44c6d4 R13: 00000000004c8623 R14: 00000000004ded68 R15: 00000000ffffffff The buggy address belongs to the page: page:ffffea00025aafc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x1fffc0000000000() raw: 01fffc0000000000 0000000000000000 ffffffff025a0101 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888096abef80: 00 00 00 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 f2 ffff888096abf000: f2 f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888096abf080: 00 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 ^ ffff888096abf100: 00 00 00 00 f1 f1 f1 f1 00 00 f3 f3 00 00 00 00 ffff888096abf180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Fixes: ed0de45a1008 ("ipv4: recompile ip options in ipv4_link_failure") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Stephen Suryaputra <ssuryaextr@gmail.com> Acked-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Eric Dumazet 提交于
commit 032be5f19a94de51093851757089133dcc1e92aa upstream. After commit 5271953c ("rxrpc: Use the UDP encap_rcv hook"), rxrpc_input_packet() is directly called from lockless UDP receive path, under rcu_read_lock() protection. It must therefore use RCU rules : - udp_sk->sk_user_data can be cleared at any point in this function. rcu_dereference_sk_user_data() is what we need here. - Also, since sk_user_data might have been set in rxrpc_open_socket() we must observe a proper RCU grace period before kfree(local) in rxrpc_lookup_local() v4: @local can be NULL in xrpc_lookup_local() as reported by kbuild test robot <lkp@intel.com> and Julia Lawall <julia.lawall@lip6.fr>, thanks ! v3,v2 : addressed David Howells feedback, thanks ! syzbot reported : kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 19236 Comm: syz-executor703 Not tainted 5.1.0-rc6 #79 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__lock_acquire+0xbef/0x3fb0 kernel/locking/lockdep.c:3573 Code: 00 0f 85 a5 1f 00 00 48 81 c4 10 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 ea 03 <80> 3c 02 00 0f 85 4a 21 00 00 49 81 7d 00 20 54 9c 89 0f 84 cf f4 RSP: 0018:ffff88809d7aef58 EFLAGS: 00010002 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000026 RSI: 0000000000000000 RDI: 0000000000000001 RBP: ffff88809d7af090 R08: 0000000000000001 R09: 0000000000000001 R10: ffffed1015d05bc7 R11: ffff888089428600 R12: 0000000000000000 R13: 0000000000000130 R14: 0000000000000001 R15: 0000000000000001 FS: 00007f059044d700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004b6040 CR3: 00000000955ca000 CR4: 00000000001406f0 Call Trace: lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4211 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x95/0xcd kernel/locking/spinlock.c:152 skb_queue_tail+0x26/0x150 net/core/skbuff.c:2972 rxrpc_reject_packet net/rxrpc/input.c:1126 [inline] rxrpc_input_packet+0x4a0/0x5536 net/rxrpc/input.c:1414 udp_queue_rcv_one_skb+0xaf2/0x1780 net/ipv4/udp.c:2011 udp_queue_rcv_skb+0x128/0x730 net/ipv4/udp.c:2085 udp_unicast_rcv_skb.isra.0+0xb9/0x360 net/ipv4/udp.c:2245 __udp4_lib_rcv+0x701/0x2ca0 net/ipv4/udp.c:2301 udp_rcv+0x22/0x30 net/ipv4/udp.c:2482 ip_protocol_deliver_rcu+0x60/0x8f0 net/ipv4/ip_input.c:208 ip_local_deliver_finish+0x23b/0x390 net/ipv4/ip_input.c:234 NF_HOOK include/linux/netfilter.h:289 [inline] NF_HOOK include/linux/netfilter.h:283 [inline] ip_local_deliver+0x1e9/0x520 net/ipv4/ip_input.c:255 dst_input include/net/dst.h:450 [inline] ip_rcv_finish+0x1e1/0x300 net/ipv4/ip_input.c:413 NF_HOOK include/linux/netfilter.h:289 [inline] NF_HOOK include/linux/netfilter.h:283 [inline] ip_rcv+0xe8/0x3f0 net/ipv4/ip_input.c:523 __netif_receive_skb_one_core+0x115/0x1a0 net/core/dev.c:4987 __netif_receive_skb+0x2c/0x1c0 net/core/dev.c:5099 netif_receive_skb_internal+0x117/0x660 net/core/dev.c:5202 napi_frags_finish net/core/dev.c:5769 [inline] napi_gro_frags+0xade/0xd10 net/core/dev.c:5843 tun_get_user+0x2f24/0x3fb0 drivers/net/tun.c:1981 tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2027 call_write_iter include/linux/fs.h:1866 [inline] do_iter_readv_writev+0x5e1/0x8e0 fs/read_write.c:681 do_iter_write fs/read_write.c:957 [inline] do_iter_write+0x184/0x610 fs/read_write.c:938 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1002 do_writev+0x15e/0x370 fs/read_write.c:1037 __do_sys_writev fs/read_write.c:1110 [inline] __se_sys_writev fs/read_write.c:1107 [inline] __x64_sys_writev+0x75/0xb0 fs/read_write.c:1107 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 5271953c ("rxrpc: Use the UDP encap_rcv hook") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: Nsyzbot <syzkaller@googlegroups.com> Acked-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tetsuo Handa 提交于
commit dd3ac9a684358b8c1d5c432ca8322aaf5e4f28ee upstream. syzbot is reporting uninitialized value at rds_connect() [1] and rds_bind() [2]. This is because syzbot is passing ulen == 0 whereas these functions expect that it is safe to access sockaddr->family field in order to determine minimal address length for validation. [1] https://syzkaller.appspot.com/bug?id=f4e61c010416c1e6f0fa3ffe247561b60a50ad71 [2] https://syzkaller.appspot.com/bug?id=a4bf9e41b7e055c3823fdcd83e8c58ca7270e38fReported-by: Nsyzbot <syzbot+0049bebbf3042dbd2e8f@syzkaller.appspotmail.com> Reported-by: Nsyzbot <syzbot+915c9f99f3dbc4bd6cd1@syzkaller.appspotmail.com> Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-