fs_changed() is a macro used by reiserfs to check whether its tree has been
rebalanced. It has been designed to check parallel changes on the tree after
calling a sleeping function, which released the Bkl.

fs_changed() also calls cond_resched(), so that if rescheduling is needed,
we are in the best place to do that, since we check if the tree has changed
just after (because of the bkl release on schedule()).

Even if we are not anymore using the Bkl, we still want to release the lock
while we reschedule, so that other waiters for the lock can acquire it safely,
because of the following __fs_changed() check.

[ Impact: release the reiserfs write lock when it is not needed ]

Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Sometimes we don't want to recursively hold the per superblock write
lock because we want to be sure it is actually released when we come
to sleep.

This patch introduces the necessary tools for that.

reiserfs_write_lock_once() does the same job than reiserfs_write_lock()
except that it won't try to acquire recursively the lock if the current
task already owns it. Also the lock_depth before the call of this function
is returned.

reiserfs_write_unlock_once() unlock only if reiserfs_write_lock_once()
returned a depth equal to -1, ie: only if it actually locked.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Alessio Igor Bogani <abogani@texware.it>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Alexander Beregalov <a.beregalov@gmail.com>
Cc: Chris Mason <chris.mason@oracle.com>
LKML-Reference: <1239680065-25013-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch is an attempt to remove the Bkl based locking scheme from
reiserfs and is intended.

It is a bit inspired from an old attempt by Peter Zijlstra:

   http://lkml.indiana.edu/hypermail/linux/kernel/0704.2/2174.html

The bkl is heavily used in this filesystem to prevent from
concurrent write accesses on the filesystem.

Reiserfs makes a deep use of the specific properties of the Bkl:

- It can be acqquired recursively by a same task
- It is released on the schedule() calls and reacquired when schedule() returns

The two properties above are a roadmap for the reiserfs write locking so it's
very hard to simply replace it with a common mutex.

- We need a recursive-able locking unless we want to restructure several blocks
  of the code.
- We need to identify the sites where the bkl was implictly relaxed
  (schedule, wait, sync, etc...) so that we can in turn release and
  reacquire our new lock explicitly.
  Such implicit releases of the lock are often required to let other
  resources producer/consumer do their job or we can suffer unexpected
  starvations or deadlocks.

So the new lock that replaces the bkl here is a per superblock mutex with a
specific property: it can be acquired recursively by a same task, like the
bkl.

For such purpose, we integrate a lock owner and a lock depth field on the
superblock information structure.

The first axis on this patch is to turn reiserfs_write_(un)lock() function
into a wrapper to manage this mutex. Also some explicit calls to
lock_kernel() have been converted to reiserfs_write_lock() helpers.

The second axis is to find the important blocking sites (schedule...(),
wait_on_buffer(), sync_dirty_buffer(), etc...) and then apply an explicit
release of the write lock on these locations before blocking. Then we can
safely wait for those who can give us resources or those who need some.
Typically this is a fight between the current writer, the reiserfs workqueue
(aka the async commiter) and the pdflush threads.

The third axis is a consequence of the second. The write lock is usually
on top of a lock dependency chain which can include the journal lock, the
flush lock or the commit lock. So it's dangerous to release and trying to
reacquire the write lock while we still hold other locks.

This is fine with the bkl:

      T1                       T2

lock_kernel()
    mutex_lock(A)
    unlock_kernel()
    // do something
                            lock_kernel()
                                mutex_lock(A) -> already locked by T1
                                schedule() (and then unlock_kernel())
    lock_kernel()
    mutex_unlock(A)
    ....

This is not fine with a mutex:

      T1                       T2

mutex_lock(write)
    mutex_lock(A)
    mutex_unlock(write)
    // do something
                           mutex_lock(write)
                              mutex_lock(A) -> already locked by T1
                              schedule()

    mutex_lock(write) -> already locked by T2
    deadlock

The solution in this patch is to provide a helper which releases the write
lock and sleep a bit if we can't lock a mutex that depend on it. It's another
simulation of the bkl behaviour.

The last axis is to locate the fs callbacks that are called with the bkl held,
according to Documentation/filesystem/Locking.

Those are:

- reiserfs_remount
- reiserfs_fill_super
- reiserfs_put_super

Reiserfs didn't need to explicitly lock because of the context of these callbacks.
But now we must take care of that with the new locking.

After this patch, reiserfs suffers from a slight performance regression (for now).
On UP, a high volume write with dd reports an average of 27 MB/s instead
of 30 MB/s without the patch applied.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: NIngo Molnar <mingo@elte.hu>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Bron Gondwana <brong@fastmail.fm>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
LKML-Reference: <1239070789-13354-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Several code paths in reiserfs have a construct like:

 if (is_direntry_le_ih(ih = B_N_PITEM_HEAD(src, item_num))) ...

which, in addition to being ugly, end up causing compiler warnings with
gcc 4.4.0.  Previous compilers didn't issue a warning.

fs/reiserfs/do_balan.c:1273: warning: operation on `aux_ih' may be undefined
fs/reiserfs/lbalance.c:393: warning: operation on `ih' may be undefined
fs/reiserfs/lbalance.c:421: warning: operation on `ih' may be undefined
fs/reiserfs/lbalance.c:777: warning: operation on `ih' may be undefined

I believe this is due to the ih being passed to macros which evaluate the
argument more than once.  This is old code and we haven't seen any
problems with it, but this patch eliminates the warnings.

It converts the multiple evaluation macros to static inlines and does a
preassignment for the cases that were causing the warnings because that
code is just ugly.
Reported-by: NChris Mason <mason@oracle.com>
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch is a simple s/p_._//g to the reiserfs code.  This is the
fifth in a series of patches to rip out some of the awful variable
naming in reiserfs.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch is a simple s/p_s_tb/tb/g to the reiserfs code.  This is the
fourth in a series of patches to rip out some of the awful variable
naming in reiserfs.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch is a simple s/p_s_inode/inode/g to the reiserfs code.  This
is the third in a series of patches to rip out some of the awful
variable naming in reiserfs.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch is a simple s/p_s_bh/bh/g to the reiserfs code.  This is the
second in a series of patches to rip out some of the awful variable
naming in reiserfs.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch is a simple s/p_s_sb/sb/g to the reiserfs code.  This is the
first in a series of patches to rip out some of the awful variable
naming in reiserfs.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some time ago, some changes were made to make security inode attributes
be atomically written during inode creation.  ReiserFS fell behind in
this area, but with the reworking of the xattr code, it's now fairly
easy to add.

The following patch adds the ability for security attributes to be added
automatically during inode creation.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The current reiserfs xattr implementation open codes reiserfs_readdir
and frees the path before calling the filldir function.  Typically, the
filldir function is something that modifies the file system, such as a
chown or an inode deletion that also require reading of an inode
associated with each direntry.  Since the file system is modified, the
path retained becomes invalid for the next run.  In addition, it runs
backwards in attempt to minimize activity.

This is clearly suboptimal from a code cleanliness perspective as well
as performance-wise.

This patch implements a generic reiserfs_for_each_xattr that uses the
generic readdir and a specific filldir routine that simply populates an
array of dentries and then performs a specific operation on them.  When
all files have been operated on, it then calls the operation on the
directory itself.

The result is a noticable code reduction and better performance.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Deadlocks are possible in the xattr code between the journal lock and the
xattr sems.

This patch implements journalling for xattr operations. The benefit is
twofold:
 * It gets rid of the deadlock possibility by always ensuring that xattr
   write operations are initiated inside a transaction.
 * It corrects the problem where xattr backing files aren't considered any
   differently than normal files, despite the fact they are metadata.

I discussed the added journal load with Chris Mason, and we decided that
since xattrs (versus other journal activity) is fairly rare, the introduction
of larger transactions to support journaled xattrs wouldn't be too big a deal.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With the switch to using inode->i_mutex locking during lookups/creation
in the xattr root, the per-super xattr lock is no longer needed.

This patch removes it.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Although reiserfs can currently handle severe errors such as journal failure,
it cannot handle less severe errors like metadata i/o failure. The following
patch adds a reiserfs_error() function akin to the one in ext3.

Subsequent patches will use this new error handler to handle errors more
gracefully in general.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch kills off reiserfs_journal_abort as it is never called, and
combines __reiserfs_journal_abort_{soft,hard} into one function called
reiserfs_abort_journal, which performs the same work. It is silent
as opposed to the old version, since the message was always issued
after a regular 'abort' message.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ReiserFS panics can be somewhat inconsistent.
In some cases:
 * a unique identifier may be associated with it
 * the function name may be included
 * the device may be printed separately

This patch aims to make warnings more consistent. reiserfs_warning() prints
the device name, so printing it a second time is not required. The function
name for a warning is always helpful in debugging, so it is now automatically
inserted into the output. Hans has stated that every warning should have
a unique identifier. Some cases lack them, others really shouldn't have them.
reiserfs_warning() now expects an id associated with each message. In the
rare case where one isn't needed, "" will suffice.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

uniqueness2type and type2uniquness issue a warning when the value is
unknown. When called from reiserfs_warning, this causes a re-entrancy
problem and deadlocks on the error buffer lock.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ReiserFS warnings can be somewhat inconsistent.
In some cases:
 * a unique identifier may be associated with it
 * the function name may be included
 * the device may be printed separately

This patch aims to make warnings more consistent. reiserfs_warning() prints
the device name, so printing it a second time is not required. The function
name for a warning is always helpful in debugging, so it is now automatically
inserted into the output. Hans has stated that every warning should have
a unique identifier. Some cases lack them, others really shouldn't have them.
reiserfs_warning() now expects an id associated with each message. In the
rare case where one isn't needed, "" will suffice.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch makes leaf_paste_entries more consistent with respect to the
other leaf operations.  Using buffer_info instead of buffer_head
directly allows us to get a superblock pointer for use in error
handling.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes up the reiserfs code such that transaction ids are
always unsigned ints.  In places they can currently be signed ints or
unsigned longs.

The former just causes an annoying clm-2200 warning and may join a
transaction when it should wait.

The latter is just for correctness since the disk format uses a 32-bit
transaction id.  There aren't any runtime problems that result from it
not wrapping at the correct location since the value is truncated
correctly even on big endian systems.  The 0 value might make it to
disk, but the mount-time checks will bump it to 10 itself.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The following patch adds the fields for tracking mount counts and last
fsck timestamps to the superblock.  It also increments the mount count
on every read-write mount.

Reiserfsprogs 3.6.21 added support for these fields.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Only REISERFS_IOC_* definitions are required for user space
rest should be in #ifdef __KERNEL__ as pointed by Arnd Bergmann.
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>

fix the following 'make headers_check' warnings:

  usr/include/linux/reiserfs_fs.h:687: extern's make no sense in userspace
  usr/include/linux/reiserfs_fs.h:995: extern's make no sense in userspace
  usr/include/linux/reiserfs_fs.h:997: extern's make no sense in userspace
  usr/include/linux/reiserfs_fs.h:1467: extern's make no sense in userspace
  usr/include/linux/reiserfs_fs.h:1760: extern's make no sense in userspace
  usr/include/linux/reiserfs_fs.h:1764: extern's make no sense in userspace
  usr/include/linux/reiserfs_fs.h:1766: extern's make no sense in userspace
  usr/include/linux/reiserfs_fs.h:1769: extern's make no sense in userspace
  usr/include/linux/reiserfs_fs.h:1771: extern's make no sense in userspace
  usr/include/linux/reiserfs_fs.h:1805: extern's make no sense in userspace
  usr/include/linux/reiserfs_fs.h:1948: extern's make no sense in userspace
  usr/include/linux/reiserfs_fs.h:1949: extern's make no sense in userspace
  usr/include/linux/reiserfs_fs.h:1950: extern's make no sense in userspace
  usr/include/linux/reiserfs_fs.h:1951: extern's make no sense in userspace
  usr/include/linux/reiserfs_fs.h:1962: extern's make no sense in userspace
  usr/include/linux/reiserfs_fs.h:1963: extern's make no sense in userspace
  usr/include/linux/reiserfs_fs.h:1964: extern's make no sense in userspace
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>

__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Quota files cannot have tails because quota_write and quota_read functions do
not support them.  So far when quota files did have tail, we just refused to
turn quotas on it.  Sadly this check has been wrong and so there are now
plenty installations where quota files don't have NOTAIL flag set and so now
after fixing the check, they suddently fail to turn quotas on.  Since it's
easy to unpack the tail from kernel, do this from reiserfs_quota_on() which
solves the problem and is generally nicer to users anyway.
Signed-off-by: NJan Kara <jack@suse.cz>
Reported-by: <urhausen@urifabi.net>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since this header is exported to userspace and all the other types in the
header have been scrubbed, this brings the last straggler in line.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Another nice little cleanup by using the new methods.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Cc: Neil Brown <neilb@suse.de>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Chris Mason <mason@suse.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: "Vladimir V. Saveliev" <vs@namesys.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The task_struct->pid member is going to be deprecated, so start
using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in
the kernel.

The first thing to start with is the pid, printed to dmesg - in
this case we may safely use task_pid_nr(). Besides, printks produce
more (much more) than a half of all the explicit pid usage.

[akpm@linux-foundation.org: git-drm went and changed lots of stuff]
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Implement support for file systems larger than 8 TiB.

The reiserfs superblock contains a 16 bit value for counting the number of
bitmap blocks.  The rest of the disk format supports file systems up to 2^32
blocks, but the bitmap block limitation artificially limits this to 8 TiB with
a 4KiB block size.

Rather than trust the superblock's 16-bit bitmap block count, we calculate it
dynamically based on the number of blocks in the file system.  When an
incorrect value is observed in the superblock, it is zeroed out, ensuring that
older kernels will not be able to mount the file system.

Userspace support has already been implemented and shipped in reiserfsprogs
3.6.20.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Do a quick signedness check for block numbers.  There are a number of places
where signed integers are used for block numbers, which limits the usable file
system size to 8 TiB.  The disk format, excepting a problem which will be
fixed in the following patch, supports file systems up to 16 TiB in size.
This patch cleans up those sites so that we can enable the full usable size.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- remove the following no longer used functions:
  - bitmap.c: reiserfs_claim_blocks_to_be_allocated()
  - bitmap.c: reiserfs_release_claimed_blocks()
  - bitmap.c: reiserfs_can_fit_pages()

- make the following functions static:
  - inode.c: restart_transaction()
  - journal.c: reiserfs_async_progress_wait()
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NVladimir V. Saveliev <vs@namesys.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

	#x blocks expansion of macro argument, but it won't do you any
good if it's already been expanded...  As it is, RFALSE(cond, ....)
ended up with stringified _expanded_ cond.  Real fun when cond contains
something like le32_to_cpu() and you are on a big-endian box...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Many struct inode_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Rename Reiserfs's struct path to struct treepath to prevent name collision
between it and struct path from fs/namei.c.
Signed-off-by: NJosef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch moves the bitmap loading code from super.c to bitmap.c

The code is also restructured somewhat.  The only difference between new
format bitmaps and old format bitmaps is where they are.  That's a two liner
before loading the block to use the correct one.  There's no need for an
entirely separate code path.

The load path is generally the same, with the pattern being to throw out a
bunch of requests and then wait for them, then cache the metadata from the
contents.

Again, like the previous patches, the purpose is to set up for later ones.

Update: There was a bug in the previously posted version of this that resulted
in corruption.  The problem was that bitmap 0 on new format file systems must
be treated specially, and wasn't.  A stupid bug with an easy fix.

This is hopefully the last fix for the disaster that is the reiserfs bitmap
patch set.

If a bitmap block was full, first_zero_hint would end up at zero since it
would never be changed from it's zeroed out value.  This just sets it
beyond the end of the bitmap block.  If any bits are freed, it will be
reset to a valid bit.  When info->free_count = 0, then we already know it's
full.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Move the ReiserFS device ioctl compat stuff from fs/compat_ioctl.c to the
ReiserFS driver so that the ReiserFS header file doesn't need to be included.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Move common FS-specific ioctls from linux/ext2_fs.h to linux/fs.h as FS_IOC_*
and FS_IOC32_* and have the users of them use those as a base.

Also move the GETFLAGS/SETFLAGS flags to linux/fs.h as FS_*_FL macros, and then
have the other users use them as a base.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Signed-off-by: NJeff Garzik <jeff@garzik.org>