With 32 bit compilation several of the fields become misaligned here.
Fixing this is an ABI break for 32 bit rxe and it is in well used
portions of the rxe ABI.

To handle this we bump the ABI version, as expected. However the user
space driver doesn't handle it properly today, so all existing user
space continues to work.

Updated userspace will start to require the necessary kernel version.

We don't expect there to be any 32 bit users of rxe. Most likely cases,
such as ARM 32 already generally don't work because rxe does not handle
the CPU cache properly on its shared with userspace pages.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

rss_caps in struct mlx4_uverbs_ex_query_device_resp is misaligned on
32 bit compared to 64 bit, add explicit padding.

The rss caps were introduced recently and are very rarely used in user
space, mainly for DPDK.

We don't expect there to be a real 32 bit user, so this change is done
without compat considerations.

Fixes: 09d208b2 ("IB/mlx4: Add report for RSS capabilities by vendor channel")
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

struct qedr_alloc_ucontext_resp is a different length in 32 and 64
bit compiles due to implicit compiler padding.

The structs alloc_pd_uresp, create_cq_uresp and create_qp_uresp are
not padded by the compiler, but in user space the compiler pads them
due to the way the core and driver structs are concatenated. Make
this padding explicit and consistent for future sanity.

The kernel driver can already handle the user buffer being smaller
than required and copies correctly, so no compat or ABI break happens
from introducing the explicit padding.
Acked-by: NMichal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The rdma_ucm_event_resp is a different length on 32 and 64 bit compiles.

The kernel requires it to be the expected length or longer so 32 bit
builds running on a 64 bit kernel will not work.

Retain full compat by having all kernels accept a struct with or without
the trailing reserved field.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

To help automatic detection we want pahole to report the same struct
layouts for 32 and 64 bit compiles. These cases are all implicit
padding added at the end of embedded structs as part of a union.

The added reserved fields have no impact on the ABI.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The udata's for alloc_pd cannot contain u64s due to alignment
constraints. Switch the two never-used u64's to arrays of u32 to reduce
the required struct alignment to 4 bytes.

These reserved fields are totally unnecessary, never written and never
read.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This is useful to rdma ULPs.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Currently CM request for RoCE follows following flow.
rdma_create_id()
rdma_resolve_addr()
rdma_resolve_route()
For RC QPs:
rdma_connect()
->cma_connect_ib()
  ->ib_send_cm_req()
    ->cm_init_av_by_path()
      ->ib_init_ah_attr_from_path()
For UD QPs:
rdma_connect()
->cma_resolve_ib_udp()
  ->ib_send_cm_sidr_req()
    ->cm_init_av_by_path()
      ->ib_init_ah_attr_from_path()

In both the flows, route is already resolved before sending CM requests.
Therefore, code is refactored to avoid resolving route second time in
ib_cm layer.
ib_init_ah_attr_from_path() is extended to resolve route when it is not
yet resolved for RoCE link layer. This is achieved by caller setting
route_resolved field in path record whenever it has route already
resolved.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

ib_query_gid() in commit [1] refers to RoCE GID table capability of
the HCA using rdma_cap_roce_gid_table().
ib_core maintains the GID table cache regardless of the HCA provider
drivers capability to maintain RoCE GID table.
Therefore, whether to return a GID table entry from the software cache or
from HCA should be done based on whether the port is RoCE or not.

[1] commit 03db3a2d ("IB/core: Add RoCE GID table management")
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The restrack clean routine had simple, but powerful WARN_ON check
to see if all resources are cleared prior to releasing device.

The WARN_ON check performed very well, but lack of information
which device caused to resource leak, the object type and origin
made debug to be fun and challenging at the same time.

The fact that all dumps were the same because restrack_clean() is
called in dealloc() didn't help either.

So let's fix spelling error and convert WARN_ON to be more debug
friendly. The dmesg cut below gives example of how the output
will look output for the case fixed in patch [1]

[  438.421372] restrack: ------------[ cut here ]------------
[  438.423448] restrack: BUG: RESTRACK detected leak of resources on mlx5_2
[  438.425600] restrack: Kernel PD object allocated by mlx5_ib is not freed
[  438.427753] restrack: Kernel CQ object allocated by mlx5_ib is not freed
[  438.429660] restrack: ------------[ cut here ]------------

[1] https://patchwork.kernel.org/patch/10298695/

Cc: Michal Kalderon <Michal.Kalderon@cavium.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Upon detecting both kernel and user space support record doorbell,
the kernel needs to enable this capability in hardware by db_en,
and it should take place before cq context configuration in
hns_roce_cq_alloc. Currently, db_en is configured after cq alloc
and db_map_user has similar problem.
Reported-by: NXiping Zhang <zhangxiping3@huawei.com>
Fixes: 9b44703d ("RDMA/hns: Support cq record doorbell for the user space")
Signed-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Open coding a loose value is not acceptable for describing the uABI in
RDMA. Provide the missing struct.
Acked-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Code includes wmb() followed by writel(). writel() already has a barrier on
some architectures like arm64.

This ends up CPU observing two barriers back to back before executing the
register write.

Since code already has an explicit barrier call, changing writel() to
writel_relaxed().
Signed-off-by: NSinan Kaya <okaya@codeaurora.org>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Enable the ioctl() uAPI for IB by default if the standard write()
uAPI (INFINIBAND_USER_ACCESS) is enabled. Verbs that are
also available under the old write() uAPI are put inside a new
INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI Kconfig.
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Previously, adding driver specific attributes required drivers to
declare all the hierarchy - object tree, object, methods and the
attributes themselves. A common use case is adding a few attributes to
an existing common method.
In order to simplify the driver's code, we add some macros to do all
these declarations automatically.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Currently, all objects are declared in uverbs_std_types. This could lead
to a huge file once we implement all objects, methods and handlers.
Moving each object to its own file to keep the files smaller and more
readable. uverbs_std_types.c will only contain the parsing tree
definition and objects without any methods.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The ioctl() based uverbs is based on merging feature trees. This teaches
the generic parser how to parse methods according to the provider's
support. In order to support merging with the common objects, exporting
the common-object-tree to the provider drivers.
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Previously, we've used UVERBS_ATTR_SPEC_F_MIN_SZ for extending existing
attributes. The behavior of this flag was the kernel accepts anything
bigger than the minimum size it specified. This is unsafe, since in
order to safely extend an attribute, we need to make sure unknown size
is zeroed. Replacing UVERBS_ATTR_SPEC_F_MIN_SZ with
UVERBS_ATTR_SPEC_F_MIN_SZ_OR_ZERO, which essentially checks that the
unknown size is zero. In addition, attributes are now decorated with
UVERBS_ATTR_TYPE and UVERBS_ATTR_STRUCT, so we can provide the minimum
and known length.

Users of this flag needs to use copy_from_or_zero functions/macros.
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Downstream patches extend uverbs_attr_spec with new fields.
In order to save space, we move the type and flags fields to
the various attribute flavors contained in the union.
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Extending uverbs_ioctl header with driver_id and another reserved
field. driver_id should be used in order to identify the driver.
Since every driver could have its own parsing tree, this is necessary
for strace support.
Downstream patches take off the EXPERIMENTAL flag from the ioctl() IB
support and thus we add some reserved fields for future usage.
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Use macros to make names consistent in ioctl() uAPI:
The ioctl() uAPI works with object-method hierarchy. The method part
also states which handler should be executed when this method is called
from user-space. Therefore, we need to tie method, method's id, method's
handler and the object owning this method together.
Previously, this was done through explicit developer chosen names.
This makes grepping the code harder. Changing the method's name,
method's handler and object's name to be automatically generated based
on the ids.

The headers are split in a way so they be included and used by
user-space. One header strictly contains structures that are used
directly by user-space applications, where another header is used for
internal library (i.e. libibverbs) to form the ioctl() commands.
Other header simply contains the required general command structure.
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

According to the SRP standard the INITIATOR and TARGET PORT IDENTIFIER
fields from the login request specify the I_T nexus. Whether or not an
SRP target closes an existing connection for an I_T nexus when a login
request is received depends on the value of the MULTICHANNEL field in
the login request. The SRP initiator derives the value of the
INITIATOR and TARGET PORT IDENTIFIER fields from the .id_ext,
.ioc_guid, .initiator_ext .sgid members of the srp_target_port
structure. This means that the .rdma_cm.dst check must be removed from
srp_conn_unique(). This patch avoids that for target ports that have
multiple addresses, e.g. an IPv4 and an IPv6 address, and if a
connection is established to both target port addresses, that the
initiator logs in alternatingly every 10 seconds to the other target
port address. An SRP target must namely terminate all but one
connections for a given I_T nexus if the MULTICHANNEL field has not
been set in the login request.

Fixes: 19f31343 ("IB/srp: Add RDMA/CM support")
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Enable RAW QP to be able to configure burst control by modify_qp. By
using burst control with rate limiting, user can achieve best
performance and accuracy. The burst control information is passed by
user through udata.

This patch also reports burst control capability for mlx5 related
hardwares, burst control is only marked as supported when both
packet_pacing_burst_bound and packet_pacing_typical_size are
supported.
Signed-off-by: NBodong Wang <bodong@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add two new parameters: max_burst_sz and typical_pkt_size (both
in bytes) to rate limit configurations.

max_burst_sz: The device will schedule bursts of packets for an
SQ connected to this rate, smaller than or equal to this value.
Value 0x0 indicates packet bursts will be limited to the device
defaults. This field should be used if bursts of packets must be
strictly kept under a certain value.

typical_pkt_size: When the rate limit is intended for a stream of
similar packets, stating the typical packet size can improve the
accuracy of the rate limiter. The expected packet size will be
the same for all SQs associated with the same rate limit index.

Ethernet driver is updated according to this change, but these two
parameters will be kept as 0 due to lacking of proper way to get the
configurations from user space which requires to change
ndo_set_tx_maxrate interface.
Signed-off-by: NBodong Wang <bodong@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The data in resp will be copied from kernel to userspace, thus it needs to
be initialized to zeros to avoid copying uninited stack memory.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Fixes: e088a685 ("RDMA/hns: Support rq record doorbell for the user space")
Signed-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

ib_peek_cq() verb doesn't seem be implemented in current code.
There is some past reference to it at [1] about it being unimplemented.

Lot of user documentation created out of kdoc refers to this
unimplemented API. Therefore, remove unimplemented API.

[1] http://lists.openfabrics.org/pipermail/ofw/2008-May/002465.htmlSigned-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Use rdma_is_port_valid() which performs port validity check instead of
open coding the same check.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

What is going on here is a bit subtle, in the kernel there is no
problem because the struct is copied using copy_from_user, so it
can safely have an 8 byte alignment, however in userspace it must
be constructed by concatenation with the ib_uverbs_alloc_pd_resp
struct. This is due to the required memory layout to execute the
command.

Since ibv_uverbs_alloc_pd_resp is only 4 bytes long, this causes
misalignment, and the user space will experience an unexpected padding.
Currently it works around this via pointer maths.

Make everything more robust by having the compiler reduce the alignment
of the struct to 4. The userspace has assertions to ensure this
works properly in all situations.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Before commit f1b65df5 ("IB/mlx5: Add support for active_width and
active_speed in RoCE"), the mlx5_ib driver set the default active_width
and active_speed to IB_WIDTH_4X and IB_SPEED_QDR.

When the RoCE port is down, the RoCE port does not negotiate the active
width with the remote side, causing the active width to be zero. When
running userspace ibstat to view the port status, ibstat will panic as it
reads an invalid width from sys file.

This patch restores the original behavior.

Fixes: f1b65df5 ("IB/mlx5: Add support for active_width and active_speed in RoCE").
Signed-off-by: NHonggang Li <honli@redhat.com>
Reviewed-by: NHal Rosenstock <hal@mellanox.com>
Reviewed-by: NNoa Osherovich <noaos@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Before commit f1b65df5 ("IB/mlx5: Add support for active_width and
active_speed in RoCE"), the mlx5_ib driver set default active_width and
active_speed to IB_WIDTH_4X and IB_SPEED_QDR.

Now, the active_width and active_speed are zeros if the RoCE port
is in DOWN state. The speed string should be set to " SDR" instead of
a blank string when active_speed is zero.
Signed-off-by: NHonggang Li <honli@redhat.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The restrack code relies on the fact that object structures are zeroed at
the allocation stage, the mlx4 CQ wasn't allocated with kzalloc and it
caused to the following crash.

[  137.392209] general protection fault: 0000 [#1] SMP KASAN PTI
[  137.392972] CPU: 0 PID: 622 Comm: ibv_rc_pingpong Tainted: G        W        4.16.0-rc1-00099-g00313983 #11
[  137.395079] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014
[  137.396866] RIP: 0010:rdma_restrack_del+0xc8/0xf0
[  137.397762] RSP: 0018:ffff8801b54e7968 EFLAGS: 00010206
[  137.399008] RAX: 0000000000000000 RBX: ffff8801d8bcbae8 RCX: ffffffffb82314df
[  137.400055] RDX: dffffc0000000000 RSI: dffffc0000000000 RDI: 70696b533d454741
[  137.401103] RBP: ffff8801d90c07a0 R08: ffff8801d8bcbb00 R09: 0000000000000000
[  137.402470] R10: 0000000000000001 R11: ffffed0036a9cf52 R12: ffff8801d90c0ad0
[  137.403318] R13: ffff8801d853fb20 R14: ffff8801d8bcbb28 R15: 0000000000000014
[  137.404736] FS:  00007fb415d43740(0000) GS:ffff8801e5c00000(0000) knlGS:0000000000000000
[  137.406074] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  137.407101] CR2: 00007fb41557df20 CR3: 00000001b580c001 CR4: 00000000003606b0
[  137.408308] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  137.409352] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  137.410385] Call Trace:
[  137.411058]  ib_destroy_cq+0x23/0x60
[  137.411460]  uverbs_free_cq+0x37/0xa0
[  137.412040]  remove_commit_idr_uobject+0x38/0xf0
[  137.413042]  _rdma_remove_commit_uobject+0x5c/0x160
[  137.413782]  ? lookup_get_idr_uobject+0x39/0x50
[  137.414737]  rdma_remove_commit_uobject+0x3b/0x70
[  137.415742]  ib_uverbs_destroy_cq+0x114/0x1d0
[  137.416260]  ? ib_uverbs_req_notify_cq+0x160/0x160
[  137.417073]  ? kernel_text_address+0x5c/0x90
[  137.417805]  ? __kernel_text_address+0xe/0x30
[  137.418766]  ? unwind_get_return_address+0x2f/0x50
[  137.419558]  ib_uverbs_write+0x453/0x6a0
[  137.420220]  ? show_ibdev+0x90/0x90
[  137.420653]  ? __kasan_slab_free+0x136/0x180
[  137.421155]  ? kmem_cache_free+0x78/0x1e0
[  137.422192]  ? remove_vma+0x83/0x90
[  137.422614]  ? do_munmap+0x447/0x6c0
[  137.423045]  ? vm_munmap+0xb0/0x100
[  137.423481]  ? SyS_munmap+0x1d/0x30
[  137.424120]  ? do_syscall_64+0xeb/0x250
[  137.424984]  ? entry_SYSCALL_64_after_hwframe+0x21/0x86
[  137.425611]  ? lru_add_drain_all+0x270/0x270
[  137.426116]  ? lru_add_drain_cpu+0xa3/0x170
[  137.426616]  ? lru_add_drain+0x11/0x20
[  137.427058]  ? free_pages_and_swap_cache+0xa6/0x120
[  137.427672]  ? tlb_flush_mmu_free+0x78/0x90
[  137.428168]  ? arch_tlb_finish_mmu+0x6d/0xb0
[  137.428680]  __vfs_write+0xc4/0x350
[  137.430917]  ? kernel_read+0xa0/0xa0
[  137.432758]  ? remove_vma+0x90/0x90
[  137.434781]  ? __kasan_slab_free+0x14b/0x180
[  137.437486]  ? remove_vma+0x83/0x90
[  137.439836]  ? kmem_cache_free+0x78/0x1e0
[  137.442195]  ? percpu_counter_add_batch+0x1d/0x90
[  137.444389]  vfs_write+0xf7/0x280
[  137.446030]  SyS_write+0xa1/0x120
[  137.447867]  ? SyS_read+0x120/0x120
[  137.449670]  ? mm_fault_error+0x180/0x180
[  137.451539]  ? _cond_resched+0x16/0x50
[  137.453697]  ? SyS_read+0x120/0x120
[  137.455883]  do_syscall_64+0xeb/0x250
[  137.457686]  entry_SYSCALL_64_after_hwframe+0x21/0x86
[  137.459595] RIP: 0033:0x7fb415637b94
[  137.461315] RSP: 002b:00007ffdebea7d88 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[  137.463879] RAX: ffffffffffffffda RBX: 00005565022d1bd0 RCX: 00007fb415637b94
[  137.466519] RDX: 0000000000000018 RSI: 00007ffdebea7da0 RDI: 0000000000000003
[  137.469543] RBP: 00007ffdebea7d98 R08: 0000000000000000 R09: 00005565022d40c0
[  137.472479] R10: 00000000000009cf R11: 0000000000000246 R12: 00005565022d2520
[  137.475125] R13: 00000000000003e8 R14: 0000000000000000 R15: 00007ffdebea7fd0
[  137.477760] Code: f7 e8 dd 0d 0b ff 48 c7 43 40 00 00 00 00 48 89 df e8 0d 0b 0b ff 48 8d 7b 28 c6 03 00 e8 41 0d 0b ff 48 8b 7b 28 48 85 ff 74 06 <f0> ff 4f 48 74 10 5b 48 89 ef 5d 41 5c 41 5d 41 5e e9 32 b0 ee
[  137.483375] RIP: rdma_restrack_del+0xc8/0xf0 RSP: ffff8801b54e7968
[  137.486436] ---[ end trace 81835a1ea6722eed ]---
[  137.488566] Kernel panic - not syncing: Fatal exception
[  137.491162] Kernel Offset: 0x36000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)

Fixes: 00313983 ("RDMA/nldev: provide detailed CM_ID information")
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

As a default, for Ethernet packets, the device scatters only the payload
of ingress packets. The scatter FCS feature lets the user to get the FCS
(Ethernet's frame check sequence) in the received WR's buffer as a 4
Bytes trailer following the packet's payload.
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NGuy Levi <guyle@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Report to the user area the TSO device capabilities, it includes the
max_tso size and the QP types that support it.

The TSO is applicable only when when of the ports is ETH and the device
supports it.

uresp logic around rss_caps is updated to fix a till-now harmless bug
computing the length of the structure to copy. The code did not handle the
implicit padding before rss_caps correctly. This is necessay to copy
tss_caps successfully.
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

There is no explicit tear-down sequence initiated on
connections if the Control QP OP, Modify QP to close,
fails. Fix this by triggering a driver generated
Asynchronous Event (AE) on Modify QP failures and
tear-down the connection on receipt of the AE.

This fix can be generalized to other Modify QP failures
(i.e. RTS->TERM, IDLE->RTS, etc) as any modify failure
will require a connection tear-down.

Fixes: d3749841 ("i40iw: add files for iwarp interface")
Signed-off-by: NHenry Orosco <henry.orosco@intel.com>
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The flush CQP OP can be used to optionally generate
Asynchronous Events (AEs) in addition to QP flush.
Consolidate all HW AE generation code under a new
function i40iw_gen_ae which use the flush CQP OP
to only generate AEs.
Signed-off-by: NHenry Orosco <henry.orosco@intel.com>
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Open coding a loose value is not acceptable for describing the uABI in
RDMA. Provide the missing struct.
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Open coding a loose value is not acceptable for describing the uABI in
RDMA. Provide the missing struct.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

All of these defines are part of the uABI for the driver, this
header duplicates providers/i40iw/i40iw-abi.h in rdma-core.
Acked-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

MLX4_USER_DEV_CAP_LARGE_CQE (via mlx4_ib_alloc_ucontext_resp.dev_caps)
and MLX4_IB_QUERY_DEV_RESP_MASK_CORE_CLOCK_OFFSET (via
mlx4_uverbs_ex_query_device_resp.comp_mask) are copied directly to
userspace and form part of the uAPI.

Move them to the uapi header where they belong.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Open coding pointer math is not acceptable for describing the uABI in
RDMA. Provide structs for all the cases.

The udata is casted to the struct as close to the verbs entry point
as possible for maximum clarity. Function signatures and so forth
are revised to allow for this.
Tested-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>