Delete successive assignments to the same location.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression i;
@@

*i = ...;
 i = ...;
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

pata_legacy is incorrectly testing PATA_WINBOND_VLB_MODULE instead of
CONFIG_PATA_WINBOND_VLB_MODULE.  Fix it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: N"Robert P. J. Day" <rpjday@crashcourse.ca>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

SCSI commands may be issued between __scsi_add_device() and dev->sdev
assignment, so it's unsafe for ata_qc_complete() to dereference
dev->sdev->locked without checking whether it's NULL or not.  Fix it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: stable@kernel.org
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: GIC: don't disable software generated interrupts
  ARM: 6472/1: vexpress ct-ca9x4: only set twd_base if local timers are being used
  ARM: arch/arm/kernel/traps.c: Convert sprintf_symbol to %pS
  ARM: arch/arm/kernel/hw_breakpoint.c: Convert WARN_ON to WARN
  ARM: 6462/1: EP93xx: Document DMA M2P API
  ARM: 6470/1: atomic64: use generic implementation for OABI configurations
  ARM: 6469/1: perf-events: squash compiler warning
  ARM: 6468/1: backtrace: fix calculation of thread stack base
  ARM: Fix DMA coherent allocator alignment
  ARM: orion5x/kirkwood/mv78xx0: fix MPP configuration corner cases
  [ARM] TS-78xxx NAND resource type should be IORESOURCE_MEM
  ARM: pxa/saar: fix the building failure caused by typo
  ARM: pxa/cm-x2xx: remove duplicate call to pxa27x_init_irq
  ARM: pxa: fix the missing definition of IRQ_BOARD_END
  ARM: mmp: fix cpuid detection on mmp2
  [ARM] Kirkwood: restrict the scope of the PCIe reset workaround
  [ARM] Kirkwood: fix timer initialization for LaCie boards
  [ARM] Kirkwood: enhance TCLK detection

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: do not pass injected events back to the originating handler
  Input: pcf8574_keypad - fix error handling in pcf8574_kp_probe
  Input: acecad - fix a memory leak in usb_acecad_probe error path
  Input: atkbd - add 'terminal' parameter for IBM Terminal keyboards
  Input: i8042 - add Sony VAIOs to MUX blacklist
  kgdboc: reset input devices (keyboards) when exiting debugger
  Input: export input_reset_device() for use in KGDB
  Input: adp5588-keys - unify common header defines

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: (gpio-fan) Fix fan_ctrl_init error path
  hwmon: (ad7414) Return proper error code for ad7414_probe()
  hwmon: (adt7470) Return proper error code for adt7470_probe()

* 'for-linus' of git://git.kernel.dk/linux-2.6-block: (27 commits)
  block: remove unused copy_io_context()
  Documentation: remove anticipatory scheduler info
  block: remove REQ_HARDBARRIER
  ioprio: rcu_read_lock/unlock protect find_task_by_vpid call (V2)
  ioprio: fix RCU locking around task dereference
  block: ioctl: fix information leak to userland
  block: read i_size with i_size_read()
  cciss: fix proc warning on attempt to remove non-existant directory
  bio: take care not overflow page count when mapping/copying user data
  block: limit vec count in bio_kmalloc() and bio_alloc_map_data()
  block: take care not to overflow when calculating total iov length
  block: check for proper length of iov entries in blk_rq_map_user_iov()
  cciss: remove controllers supported by hpsa
  cciss: use usleep_range not msleep for small sleeps
  cciss: limit commands allocated on reset_devices
  cciss: Use kernel provided PCI state save and restore functions
  cciss: fix board status waiting code
  drbd: Removed checks for REQ_HARDBARRIER on incomming BIOs
  drbd: REQ_HARDBARRIER -> REQ_FUA transition for meta data accesses
  drbd: Removed the BIO_RW_BARRIER support form the receiver/epoch code
  ...

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, pvclock: Remove leftover scale_delta() function
  x86, apic: Remove double #include
  x86: Adjust section annotations in AMD Fam10 MMCONF enabling code
  x86, UV: Update node controller MMRs
  x86: Remove unnecessary casts of void ptr returning alloc function return values
  x86: Address gcc4.6 "set but not used" warnings in apic.h
  x86, mm: Fix section mismatch in tlb.c

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf, amd: Use kmalloc_node(,__GFP_ZERO) for northbridge structure allocation
  perf_events: Fix time tracking in samples
  perf trace: update usage
  perf trace: update Documentation with new perf trace variants
  perf trace: live-mode command-line cleanup
  perf trace record: handle commands correctly
  perf record: make the record options available outside perf record
  perf trace scripting: remove system-wide param from shell scripts
  perf trace scripting: fix some small memory leaks and missing error checks
  perf: Fix usages of profile_cpu in builtin-top.c to use cpu_list
  perf, ui: Eliminate stack-smashing protection compiler complaint

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (39 commits)
  drm/ttm: Be consistent on ttm_bo_init() failures
  drm/radeon/kms: Fix retrying ttm_bo_init() after it failed once.
  drm/radeon/kms: fix thermal sensor reporting on rv6xx
  drm/radeon/kms: fix bugs in ddc and cd path router code
  drm/radeon/kms: add support for clock/data path routers
  drm: vmwgfx: fix information leak to userland
  drivers/gpu: Use vzalloc
  drm/vmwgfx: Fix oops on failing bo pin
  drm/ttm: Remove the CAP_SYS_ADMIN requirement for bo pinning
  drm/ttm: Make sure a sync object doesn't disappear while we use it
  drm/radeon/kms: don't disable shared encoders on pre-DCE3 display blocks
  drivers/gpu/drm: Update WARN uses
  drivers/gpu/drm/vmwgfx: Fix k.alloc switched arguments
  DRM: ignore invalid EDID extensions
  drm/radeon/kms: make the connector code less verbose
  drm/ttm: remove failed ttm binding error printout
  drm/ttm: Add a barrier when unreserving
  drm/ttm: Remove mm init error printouts and checks
  drm/ttm: Remove pointless list_empty check
  drm/ttm: Use private locks for the default bo range manager
  ...

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: remove incorrect assert in xfs_vm_writepage
  xfs: use hlist_add_fake
  xfs: fix a few compiler warnings with CONFIG_XFS_QUOTA=n
  xfs: tell lockdep about parent iolock usage in filestreams
  xfs: move delayed write buffer trace
  xfs: fix per-ag reference counting in inode reclaim tree walking
  xfs: xfs_ioctl: fix information leak to userland
  xfs: remove experimental tag from the delaylog option

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  APPARMOR: Fix memory leak of apparmor_init()
  APPARMOR: Fix memory leak of alloc_namespace()

* 'for-2.6.37' of git://linux-nfs.org/~bfields/linux:
  locks: remove dead lease error-handling code
  locks: fix leak on merging leases
  nfsd4: fix 4.1 connection registration race

kobject_put is called from padata_free for the padata kobject.
The kobject's release function frees the padata instance,
so don't call kobject_put for the padata kobject from pcrypt.
Reported-and-tested-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for the MacBookAir3,1 and MacBookAir3,2 to the mbp-nvidia-bl
driver.
Signed-off-by: NEdgar (gimli) Hucek <gimli@dark-green.com>
Acked-by: NRichard Purdie <rpurdie@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Handle return value, strict_strtoul is declared with attribute
warn_unused_result.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Acked-by: NRichard Purdie <rpurdie@linux.intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This affects the get/set of the current Ambient Light Zone.  Reading
should return an integer between 1..3 (1 = Daylight, 2 = office, 3 =
dark).  Writing a value between 1..3 forces the backlight controller to
enter the corresponding Ambient Light Zone.  Writing 0 returns to normal
operation.

Fix valid range checking so we don't write invalid values to the
controller, and make sure we subtract 1, since this is what the register
definition (CFGR:BLV) requires.  Otherwise the values written don't work
correctly.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Acked-by: NRichard Purdie <rpurdie@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The intensity of the backlight can be varied from a range of
max_brightness to zero.  Though most, if not all the pwm based backlight
devices start flickering at lower brightness value.  And also for each
device there exists a brightness value below which the backlight appears
to be turned off though the value is not equal to zero.

If the range of brightness for a device is from zero to max_brightness.  A
graph is plotted for brightness Vs intensity for the pwm based backlight
device has to be a linear graph.

intensity
	  |   /
	  |  /
	  | /
	  |/
	  ---------
	 0	max_brightness

But pratically on measuring the above we note that the intensity of
backlight goes to zero(OFF) when the value in not zero almost nearing to
zero(some x%).  so the graph looks like

intensity
	  |    /
	  |   /
	  |  /
	  |  |
	  ------------
	 0   x	 max_brightness

In order to overcome this drawback knowing this x% i.e nothing but the low
threshold beyond which the backlight is off and will have no effect, the
brightness value is being offset by the low threshold value(retaining the
linearity of the graph).  Now the graph becomes

intensity
	  |     /
	  |    /
	  |   /
	  |  /
	  -------------
	   0	  max_brightness

With this for each and every digit increment in the brightness from zero
there is a change in the intensity of backlight.  Devices having this
behaviour can set the low threshold brightness(lth_brightness) and pass
the same as platform data else can have it as zero.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NArun Murthy <arun.murthy@stericsson.com>
Acked-by: NLinus Walleij <linus.walleij@stericsson.com>
Acked-by: NRichard Purdie <rpurdie@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Eliminate section mismatch warning by marking s6e63m0_probe() as __devinit.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NRichard Purdie <rpurdie@linux.intel.com>
Cc: InKi Dae <inki.dae@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

drivers/video/backlight/s6e63m0.c: unregister backlight device and remove sysfs attribute file in s6e63m0_remove

s6e63m0_probe() registered backlight device and create sysfs attribute
files, thus s6e63m0_remove() should unregister backlight device and remove
sysfs attribute files.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NRichard Purdie <rpurdie@linux.intel.com>
Cc: InKi Dae <inki.dae@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The LCD was turned on if the variable power was > 0, but that was
incorrect.  The LCD has to be turned on in NORMAL and UNBLANK case.
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
Acked-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The LCD was turned on if the variable power was > 0, but that was
incorrect.  The LCD has to be turned on in NORMAL and UNBLANK case.
Signed-off-by: NMarek Vasut <marek.vasut@gmail.com>
Acked-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

gamma_table is not writable, so set permissions to 0444.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Acked-by: NRichard Purdie <rpurdie@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In the event that none of the configs are set (CONFIG_LEDS_GPIO_PLATFORM,
CONFIG_LEDS_GPIO_OF, CONFIG_LEDS_GPIO_PLATFORM), we will return a bogus
value when initializing the module.
Signed-off-by: NDavidlohr Bueso <dave@gnu.org>
Acked-by: NRichard Purdie <rpurdie@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Create sub directory Documentation/leds and add short documentation for
LP5521 and LP5523 drivers.
Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Provide configuration and compilation support for LP5521 and LP5523
Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

LP5523 chip is nine channel led driver with programmable engines.  Driver
provides support for that chip for direct access via led class or via
programmable engines.
Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patchset provides support for LP5521 and LP5523 LED driver chips from
National Semicondutor.  Both drivers supports programmable engines and
naturally LED class features.

Documentation is provided as a part of the patchset.  I created "leds"
subdirectory under Documentation.  Perhaps the rest of the leds*
documentation should be moved there.

Datasheets are freely available at National Semiconductor www pages.

This patch:

LP5521 chip is three channel led driver with programmable engines.  Driver
provides support for that chip for direct access via led class or via
programmable engines.
Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, blinking LEDs can be awkward because it is not guaranteed that
all LEDs implement blinking.  The trigger that wants it to blink then
needs to implement its own timer solution.

Rather than require that, add led_blink_set() API that triggers can use.
This function will attempt to use hw blinking, but if that fails
implements a timer for it.  To stop blinking again, brightness_set() also
needs to be wrapped into API that will stop the software blink.

As a result of this, the timer trigger becomes a very trivial one, and
hopefully we can finally see triggers using blinking as well because it's
always easy to use.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Acked-by: NRichard Purdie <rpurdie@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

WARN_ONCE is a bit strong for a deprecation warning, given that it spews a
huge backtrace.
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Salman Qazi describes the following radix-tree bug:

In the following case, we get can get a deadlock:

0.  The radix tree contains two items, one has the index 0.
1.  The reader (in this case find_get_pages) takes the rcu_read_lock.
2.  The reader acquires slot(s) for item(s) including the index 0 item.
3.  The non-zero index item is deleted, and as a consequence the other item is
    moved to the root of the tree. The place where it used to be is queued for
    deletion after the readers finish.
3b. The zero item is deleted, removing it from the direct slot, it remains in
    the rcu-delayed indirect node.
4.  The reader looks at the index 0 slot, and finds that the page has 0 ref
    count
5.  The reader looks at it again, hoping that the item will either be freed or
    the ref count will increase. This never happens, as the slot it is looking
    at will never be updated. Also, this slot can never be reclaimed because
    the reader is holding rcu_read_lock and is in an infinite loop.

The fix is to re-use the same "indirect" pointer case that requires a slot
lookup retry into a general "retry the lookup" bit.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>
Reported-by: NSalman Qazi <sqazi@google.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The kernel syslog contains debugging information that is often useful
during exploitation of other vulnerabilities, such as kernel heap
addresses.  Rather than futilely attempt to sanitize hundreds (or
thousands) of printk statements and simultaneously cripple useful
debugging functionality, it is far simpler to create an option that
prevents unprivileged users from reading the syslog.

This patch, loosely based on grsecurity's GRKERNSEC_DMESG, creates the
dmesg_restrict sysctl.  When set to "0", the default, no restrictions are
enforced.  When set to "1", only users with CAP_SYS_ADMIN can read the
kernel syslog via dmesg(8) or other mechanisms.

[akpm@linux-foundation.org: explain the config option in kernel.txt]
Signed-off-by: NDan Rosenberg <drosenberg@vsecurity.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NEugene Teo <eugeneteo@kernel.org>
Acked-by: NKees Cook <kees.cook@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

/proc/pid/oom_adj was deprecated in August 2010 with the introduction of
the new oom killer heuristic.

This patch copies the Documentation/feature-removal-schedule.txt entry for
this tunable to the Documentation/ABI/obsolete directory so nobody misses
it.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Reported-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

nr_dirty and nr_congested are increased only when the page is dirty.  So
if all pages are clean, both them will be zero.  In this case, we should
not mark the zone congested.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Reviewed-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Acked-by: NMel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Per task latencytop accumulator prematurely terminates due to erroneous
placement of latency_record_count.  It should be incremented whenever a
new record is allocated instead of increment on every latencytop event.

Also fix search iterator to only search known record events instead of
blindly searching all pre-allocated space.
Signed-off-by: NKen Chen <kenchen@google.com>
Reviewed-by: NArjan van de Ven <arjan@infradead.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

70 hours into some stress tests of a 2.6.32-based enterprise kernel, we
ran into a NULL dereference in here:

	int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc,
	                                        unsigned long from)
	{
---->		struct inode *inode = page->mapping->host;

It looks like page->mapping was the culprit.  (xmon trace is below).
After closer examination, I realized that do_generic_file_read() does a
find_get_page(), and eventually locks the page before calling
block_is_partially_uptodate().  However, it doesn't revalidate the
page->mapping after the page is locked.  So, there's a small window
between the find_get_page() and ->is_partially_uptodate() where the page
could get truncated and page->mapping cleared.

We _have_ a reference, so it can't get reclaimed, but it certainly
can be truncated.

I think the correct thing is to check page->mapping after the
trylock_page(), and jump out if it got truncated.  This patch has been
running in the test environment for a month or so now, and we have not
seen this bug pop up again.

xmon info:

  1f:mon> e
  cpu 0x1f: Vector: 300 (Data Access) at [c0000002ae36f770]
      pc: c0000000001e7a6c: .block_is_partially_uptodate+0xc/0x100
      lr: c000000000142944: .generic_file_aio_read+0x1e4/0x770
      sp: c0000002ae36f9f0
     msr: 8000000000009032
     dar: 0
   dsisr: 40000000
    current = 0xc000000378f99e30
    paca    = 0xc000000000f66300
      pid   = 21946, comm = bash
  1f:mon> r
  R00 = 0025c0500000006d   R16 = 0000000000000000
  R01 = c0000002ae36f9f0   R17 = c000000362cd3af0
  R02 = c000000000e8cd80   R18 = ffffffffffffffff
  R03 = c0000000031d0f88   R19 = 0000000000000001
  R04 = c0000002ae36fa68   R20 = c0000003bb97b8a0
  R05 = 0000000000000000   R21 = c0000002ae36fa68
  R06 = 0000000000000000   R22 = 0000000000000000
  R07 = 0000000000000001   R23 = c0000002ae36fbb0
  R08 = 0000000000000002   R24 = 0000000000000000
  R09 = 0000000000000000   R25 = c000000362cd3a80
  R10 = 0000000000000000   R26 = 0000000000000002
  R11 = c0000000001e7b60   R27 = 0000000000000000
  R12 = 0000000042000484   R28 = 0000000000000001
  R13 = c000000000f66300   R29 = c0000003bb97b9b8
  R14 = 0000000000000001   R30 = c000000000e28a08
  R15 = 000000000000ffff   R31 = c0000000031d0f88
  pc  = c0000000001e7a6c .block_is_partially_uptodate+0xc/0x100
  lr  = c000000000142944 .generic_file_aio_read+0x1e4/0x770
  msr = 8000000000009032   cr  = 22000488
  ctr = c0000000001e7a60   xer = 0000000020000000   trap =  300
  dar = 0000000000000000   dsisr = 40000000
  1f:mon> t
  [link register   ] c000000000142944 .generic_file_aio_read+0x1e4/0x770
  [c0000002ae36f9f0] c000000000142a14 .generic_file_aio_read+0x2b4/0x770 (unreliable)
  [c0000002ae36fb40] c0000000001b03e4 .do_sync_read+0xd4/0x160
  [c0000002ae36fce0] c0000000001b153c .vfs_read+0xec/0x1f0
  [c0000002ae36fd80] c0000000001b1768 .SyS_read+0x58/0xb0
  [c0000002ae36fe30] c00000000000852c syscall_exit+0x0/0x40
  --- Exception: c00 (System Call) at 00000080a840bc54
  SP (fffca15df30) is in userspace
  1f:mon> di c0000000001e7a6c
  c0000000001e7a6c  e9290000      ld      r9,0(r9)
  c0000000001e7a70  418200c0      beq     c0000000001e7b30        # .block_is_partially_uptodate+0xd0/0x100
  c0000000001e7a74  e9440008      ld      r10,8(r4)
  c0000000001e7a78  78a80020      clrldi  r8,r5,32
  c0000000001e7a7c  3c000001      lis     r0,1
  c0000000001e7a80  812900a8      lwz     r9,168(r9)
  c0000000001e7a84  39600001      li      r11,1
  c0000000001e7a88  7c080050      subf    r0,r8,r0
  c0000000001e7a8c  7f805040      cmplw   cr7,r0,r10
  c0000000001e7a90  7d6b4830      slw     r11,r11,r9
  c0000000001e7a94  796b0020      clrldi  r11,r11,32
  c0000000001e7a98  419d00a8      bgt     cr7,c0000000001e7b40    # .block_is_partially_uptodate+0xe0/0x100
  c0000000001e7a9c  7fa55840      cmpld   cr7,r5,r11
  c0000000001e7aa0  7d004214      add     r8,r0,r8
  c0000000001e7aa4  79080020      clrldi  r8,r8,32
  c0000000001e7aa8  419c0078      blt     cr7,c0000000001e7b20    # .block_is_partially_uptodate+0xc0/0x100
Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Reviewed-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: <arunabal@in.ibm.com>
Cc: <sbest@us.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

clean_sort_range() should return a number of nonempty elements of range
array, but if the array is full clean_sort_range() returns 0.

The problem is that the number of nonempty elements is evaluated by
finding the first empty element of the array.  If there is no such element
it returns an initial value of local variable nr_range that is zero.

The fix is trivial: it changes initial value of nr_range to size of the
array.

The bug can lead to loss of information regarding all ranges, since
typically returned value of clean_sort_range() is considered as an actual
number of ranges in the array after a series of add/subtract operations.

Found by Analytical Verification project of Linux Verification Center
(linuxtesting.org), thanks to Alexander Kolosov.
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There was a signedness bug so "ret" was never less than zero and that
breaks the error handling.  Also in the original code it would overwrite
ret and the result is still negative but it's bogus number instead of the
correct error code.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Cc: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The original code had a null dereference if alloc_percpu() failed.  This
was introduced in commit 711d3d2c ("memcg: cpu hotplug aware percpu
count updates")
Signed-off-by: NDan Carpenter <error27@gmail.com>
Reviewed-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

i2c_smbus_read_byte_data() may return negative error code.  This is not
seen to als_sensing_range_store() as the result is stored in unsigned int.

Made it signed.
Signed-off-by: NVasiliy Kulikov <segooon@gmail.com>
Cc: Hong Liu <hong.liu@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Anantha Narayanan <anantha.narayanan@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>