These functions are too short and removing them makes the code more
readable.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Several error paths do not free up resources. This simplifies the code
and fixes this.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

If the probe fails (e.g. port already in use), rmmod causes null deref.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Fix all checkpatch reported issues for:

 * CHECK: "braces {} should be used on all arms of this statement".
 * CHECK: "Unbalanced braces around else statement".

Make sure all if/else statements are balanced in terms of braces. Most
cases in code are, but a few were left unbalanced, so put them all
consistent with the recommended style.
Signed-off-by: NRicardo Silva <rjpdasilva@gmail.com>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Fix all checkpatch reported issues for "CHECK: Prefer
kzalloc(sizeof(*<p>)...) over kzalloc(sizeof(struct <P>)...)".

Other similar case in the code already using recommended style, so make
it all consistent with the recommended practice.
Signed-off-by: NRicardo Silva <rjpdasilva@gmail.com>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Fix all checkpatch reported issues for "CHECK: Prefer using '"%s...",
__func__' to using '<func_name>', ..."

Use recommended style. Additionally, __func__ was already used in
similar cases throughout the code, so make it all consistent.
Signed-off-by: NRicardo Silva <rjpdasilva@gmail.com>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Fix all checkpatch reported issues for "CHECK: Comparison to NULL could
be written...".

Do these comparisons using the recommended coding style and consistent
with other similar cases in the file, which already used the recommended
way.
Signed-off-by: NRicardo Silva <rjpdasilva@gmail.com>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Fix style issues reported by checkpatch, affecting whitespace only:

 * CHECK: "Please don't use multiple blank lines".
   Two of these still triggering and left untouched because used for
   separating logical blocks (vars from functions, etc.).

 * CHECK: "spaces preferred around that '<operator>'".
   All fixed.

 * CHECK: "Alignment should match open parenthesis".
   All fixed except one on line 1161, left untouched for readability.

Move towards recommended coding style without compromising readability.
Signed-off-by: NRicardo Silva <rjpdasilva@gmail.com>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The key_addr member is only assigned, never used. So, remove it.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Just some debug statements to change.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Changing the protocol does not imply that the keymap changes.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The REP_DELAY setting on the input device is independent of hardware.
This change should not change how to driver works (as it does a
keydown/keyup and has no real repeat handling).
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Remove some stuff from lirc_dev.h which is not used anywhere.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Remove superfluous includes and defines.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Most drivers return both values when the device is gone.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The "debug" parameter isn't actually used anywhere.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

device_add() and friends already manage the references to the parent
device so these calls aren't necessary.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

These two functions only make the logic in lirc_register_driver()
harder to follow.

(Note that almost no other driver calls kobject_set_name() on their cdev
so I simply removed that part).
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Always let the kernel decide what minor the lirc chardev gets.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Merging the two means that lirc_allocate_buffer() is called before
device_add() and cdev_add() which makes more sense. This also
simplifies the locking slightly because lirc_allocate_buffer() will
always be called with lirc_dev_lock held.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Every caller of lirc_register_driver() passes their own fops and there
are no users of lirc_dev_fop_write() in the kernel tree. Thus we can
make fops mandatory and remove lirc_dev_fop_write().
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

out_sysfs is misleading, sysfs only comes into play after device_add().
Also, calling device_init() before the rest of struct dev is filled out
is clearer.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

There are no drivers which use this functionality.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Since there are no users of this functionality, it can be removed
altogether.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

drv->set_use_inc and drv->set_use_dec are already optional so we can
remove all dummy functions.
Signed-off-by: NDavid Härdeman <david@hardeman.nu>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Once IR blasting or mceusb device commands fail with mce_async_callback()
TX -EPIPE error, all subsequent TX to device then fail with the same error.
...
[  249.986174] mceusb 1-1.2:1.0: requesting 38000 HZ carrier
[  249.986210] mceusb 1-1.2:1.0: send request called (size=0x4)
[  249.986256] mceusb 1-1.2:1.0: send request complete (res=0)
[  249.986403] mceusb 1-1.2:1.0: Error: request urb status = -32 (TX HALT)
[  249.999885] mceusb 1-1.2:1.0: send request called (size=0x3)
[  249.999929] mceusb 1-1.2:1.0: send request complete (res=0)
[  250.000013] mceusb 1-1.2:1.0: Error: request urb status = -32 (TX HALT)
[  250.019830] mceusb 1-1.2:1.0: send request called (size=0x21)
[  250.019868] mceusb 1-1.2:1.0: send request complete (res=0)
[  250.020007] mceusb 1-1.2:1.0: Error: request urb status = -32 (TX HALT)
...

Fault simulation/injection is by executing the following USB operation
in a mceusb instrumented driver, prior to TX I/O.
    retval = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
	USB_REQ_SET_FEATURE, USB_RECIP_ENDPOINT,
	USB_ENDPOINT_HALT, usb_pipeendpoint(ir->pipe_out),
	NULL, 0, USB_CTRL_SET_TIMEOUT);
    dev_dbg(ir->dev, "set halt retval, %d", retval);

After setting halt state for the TX endpoint, perform an lirc "irsend"
to generate TX traffic to device. After the TX HALT, the patch restores
subsequent TX to working state.
...
[  508.009638] mceusb 1-1.2:1.0: send request called (size=0x3)
[  508.009697] mceusb 1-1.2:1.0: send request complete (res=0)
[  508.009847] mce_async_callback()
[  508.009864] mceusb 1-1.2:1.0: Error: request urb status = -32 (TX HALT)
[  508.009890] mceusb 1-1.2:1.0: kevent 0 scheduled
[  508.021552] mceusb 1-1.2:1.0: send request called (size=0x21)
[  508.021598] mceusb 1-1.2:1.0: send request complete (res=0)
[  508.021963] mce_async_callback()
[  508.021981] mceusb 1-1.2:1.0: tx data: 84 b0 0c 8c 0c 84 8c 0c 8c 0c 84 8c 0c 8c 0c 84 98 0c 98 0c 84 98 0c 8c 0c 84 8c 0c 8c 0c 81 8c 80 (length=33)
[  508.021997] mceusb 1-1.2:1.0: Raw IR data, 0 pulse/space samples
[  508.066627] mceusb 1-1.2:1.0: send request called (size=0x3)
[  508.066669] mceusb 1-1.2:1.0: send request complete (res=0)
[  508.066841] mce_async_callback()
[  508.066858] mceusb 1-1.2:1.0: tx data: 9f 08 03 (length=3)
...
Signed-off-by: NA Sun <as1033x@comcast.net>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

RX -EPIPE failure with infinite loop and flooding of
[ 2851.966506] mceusb 1-1.2:1.0: Error: urb status = -32
log message at 8000 messages per second.
Bug trigger appears to be normal, but heavy, IR receiver use.
Driver and Linux host become unusable after error.
Also seen at https://sourceforge.net/p/lirc/mailman/message/34886165/

Fix:

Message reports RX usb halt (stall) condition requiring usb_clear_halt()
call in non-interrupt context to recover. Add driver workqueue call to
perform this recovery based on method in use for the usbnet device driver.
Signed-off-by: NA Sun <as1033x@comcast.net>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

On the Amlogic SoCs, the bootloader firmware can handle the IR hardware
in order to Wake up or Power back the system when in suspend on
shutdown mode.

This patch switches the hardware configuration in a state usable by the
firmware to permit powering the system back.

Some vendor bootloader firmware were modified to switch to this
configuration but it may not be the case for all available products.

This patch was originally posted at [1].

[1] https://github.com/LibreELEC/linux-amlogic/pull/27Signed-off-by: NAlex Deryskyba <alex@codesnake.com>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This patch fixes meson-it driver by storing event without processing
to avoid losing key pressed events when system is loaded and events
are occurring too fast.

This issue was reported at [1]

[1] https://github.com/LibreELEC/linux-amlogic/pull/42Signed-off-by: NJonas Karlman <jonas@kwiboo.se>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The Kconfig format is strict enough where if the indentation isn't
correct then the "make menuconfig" will break.

Fix the indentation to match all the other entries.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Switch the interrupt description to the default which is the of node
name. This is more in line with the interrupt descriptions in
other meson drivers.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

We don't need the memory barriers here and an interrupt handler should
be as fast as possible. Therefore switch to readl_relaxed.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Switch to the managed versions of rc_allocate_device/rc_register_device,
thus simplifying the code.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Make use of the bitfield macros thus partially hiding the complexity
of dealing with bitfields.

The patch also includes a minor fix to REG0_RATE_MASK, so far it was
set to bit 0..10, but according to the spec it's bit 0..11.

[mchehab@s-opensource.com: readd REG1_MODE_SHIFT and REG2_MODE_SHIFT
 that got removed on the original patch, as this will be used on
 another patch]
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The irq number is used in the probe function only, therefore just use
a local variable.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Signed-off-by: NAndi Shyti <andi.shyti@samsung.com>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Some dev_dbg messages are misleading. Some dev_dbg messages have
inconsistent formatting. mceusb_dev_printdata() prints incorrect range
of bytes (0 to len) in buffer which the driver will actually process next.
Signed-off-by: NA Sun <as1033x@comcast.net>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Intermittent RX truncation and loss of IR received data. This resulted
in receive stream synchronization errors where driver attempted to
incorrectly parse IR data (eg 0x90 below) as command response.

[ 3969.139898] mceusb 1-1.2:1.0: processed IR data
[ 3969.151315] mceusb 1-1.2:1.0: rx data: 00 90 (length=2)
[ 3969.151321] mceusb 1-1.2:1.0: Unknown command 0x00 0x90
[ 3969.151336] mceusb 1-1.2:1.0: rx data: 98 0a 8d 0a 8e 0a 8e 0a 8e 0a 8e 0a 9a 0a 8e 0a 0b 3a 8e 00 80 41 59 00 00 (length=25)
[ 3969.151341] mceusb 1-1.2:1.0: Raw IR data, 24 pulse/space samples
[ 3969.151348] mceusb 1-1.2:1.0: Storing space with duration 500000

Bug trigger appears to be normal, but heavy, IR receiver use.
Signed-off-by: NA Sun <as1033x@comcast.net>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Trivial fix to spelling mistake in dev_err message
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Initialize scalar variables _pid_ and _ver_ to avoid a possible misbehavior.

Addresses-Coverity-ID: 1324239
Addresses-Coverity-ID: 1324240
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>