The find_map helper is already there, so let's use it.

Also we're going to introduce wider search in following patch, so it'll
be easier to make this change on single place.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NNoel Grandin <noelgrandin@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-4-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Replacing them with perf_evsel__(enable|disable).
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Noel Grandin <noelgrandin@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-2-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

perf evlist: Make perf_evlist__open() open evsels with their cpus and threads (like perf record does)

'perf record' uses perf_evsel__open() to open events and passes the
evsel->cpus and evsel->threads.  Many tests and some tools instead use
perf_evlist__open() which passes instead evlist->cpus and
evlist->threads.

Make perf_evlist__open() follow the 'perf record' behaviour so that a
consistent approach is taken.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Noel Grandin <noelgrandin@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-3-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Currently perf report only shows a help message "For a higher level
overview, try: perf report --sort comm,dso" unconditionally (even if
the sort keys were used).  Add more help tips and show randomly.

Load tips from ${prefix}/share/doc/perf-tip/tips.txt file.

  $ perf report | tail
      0.10%  swapper  [kernel.vmlinux]   [k] irq_exit
      0.09%  swapper  [kernel.vmlinux]   [k] flush_smp_call_function_queue
      0.08%  swapper  [kernel.vmlinux]   [k] native_write_msr_safe
      0.03%  swapper  [kernel.vmlinux]   [k] group_sched_in
      0.01%  perf     [kernel.vmlinux]   [k] native_write_msr_safe

  #
  # (Tip: Search options using a keyword: perf report -h <keyword>)
  #
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1452166913-27046-1-git-send-email-namhyung@kernel.org
[ Renamed it to perf_tip() and the parameter dirname to dirpath to fix the build on older distros ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

These are necessary for multi threaded sample processing:

 - hists__get__get_rotate_entries_in()
 - hists__collapse_insert_entry()
 - __hists__init()
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Noel Grandin <noelgrandin@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-14-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Using perf_hpp__register_sort_field interface instead of directly adding
the entry.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Noel Grandin <noelgrandin@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-13-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We currently set 'overhead' and 'overhead_children' as default sort keys
within perf_hpp__init function by directly adding into the sort list.

This patch adds 'overhead' and 'overhead_children' in text form into
sort_keys and let them be added by standard sort dimension interface.

We need to eliminate dirrect sort_list additions to be able to add
support for hists specific sort keys.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Noel Grandin <noelgrandin@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-12-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It's no longer needed.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Noel Grandin <noelgrandin@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-11-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Besides lockdep we use all the 'tools/lib' code in perf, so include it
completely in tags.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Noel Grandin <noelgrandin@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-10-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding code to align event names, so we get aligned output in case of
multiple events with different names.

Before:
  $ perf script
  :13757 13757 163918.230829: cpu/mem-snp-none/P: ffff88085f20d010
  :13757 13757 163918.230832: cpu/mem-loads,ldlat=30/P:     7f5a5f719f00
  :13757 13757 163918.230835: cpu/mem-loads,ldlat=30/P:     7f5a5f719f00
  :13758 13758 163918.230838: cpu/mem-snp-none/P: ffff88085f4ad810
  :13758 13758 163918.154093: cpu/mem-stores/P: ffff88085bb53f28
  :13757 13757 163918.155264: cpu/mem-snp-hitm/P:           601080
  ...

After:
  $ perf script
  :13757 13757 163918.228831:       cpu/mem-snp-none/P: ffffffff81a841c0
  :13757 13757 163918.228834: cpu/mem-loads,ldlat=30/P:     7f5a5f719f08
  :13757 13757 163918.228837: cpu/mem-loads,ldlat=30/P:     7f5a5f719f08
  :13758 13758 163918.228837:       cpu/mem-snp-none/P: ffff88085f4ad800
  :13758 13758 163918.154093:         cpu/mem-stores/P: ffff88085bb53f28
  :13757 13757 163918.155264:       cpu/mem-snp-hitm/P:           601080
  ...
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Noel Grandin <noelgrandin@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-9-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

These lost headers are found in arm64 cross buildings, failing to build
perf using tarballs generated using:

 $ make perf-targz-src-pkg
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452263041-225488-3-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The trace command still appears in help message when you run simple
'perf' command.

It's because the generate-cmdlist.sh does not care about the
HAVE_LIBAUDIT_SUPPORT dependency of trace command and puts it into
generated common_cmds array.

Wrapping trace command under HAVE_LIBAUDIT_SUPPORT dependency, which
will exclude it from common_cmds array if HAVE_LIBAUDIT_SUPPORT is not
set.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Noel Grandin <noelgrandin@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-8-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The event group view feature is to see related events together.  To use
the group view, events should be recorded as a group with a dedicated
syntax of surrounding events by braces (-e '{ evt1, evt2, ... }').

Also 'perf report' also requires the --group option to enable it.
However it's almost always beneficial to use the group view to see the
group events as it's more expressive.  And I think it's more natural to
see events together if they are recorded as a group.

Thus this patch changes the default value to enable it.  If users don't
want to see like it and keep the original behavior, they can set the
report.group config variable to false and/or use --no-group option in
the 'perf report' command line.
Requested-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1448807057-3506-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It missed to decay periods in callchains when decaying hist entries.
This resulted in more than 100 percent overhead in callchains in the
fractal style output.
Reported-by: NArnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1451963160-17196-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

So that lib/find_bit.c doesn't requires anything inside tools/perf/

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: George Spelvin <linux@horizon.com
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lkml.kernel.org/n/tip-7lxe7jgohaac5faodndhdmvk@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Need to move the bitmap.[ch] things from tools/perf/ to tools/lib, will
be done in the next patches.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: George Spelvin <linux@horizon.com
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lkml.kernel.org/n/tip-5fys65wkd7gu8j7a7xgukc5t@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The commit that introduced it should've moved it to the same place, plus
the 'tools/' prefix, but instead moved it to a bogus tools/lib/util/
directory, being the only file there.

Move it to tools/lib/find_bit.c, picking the name for the file where
these routines live since:

 8f6f19dd ("lib: move find_last_bit to lib/find_next_bit.c")

Next step is to make tools/lib/find_bit.c to differ from lib/find_bit.c
just in removing what is not used by tools/.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: George Spelvin <linux@horizon.com
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lkml.kernel.org/n/tip-p391cex5mqvahp4pwrton87n@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Before:

  $ perf test -v cqm
  48: Test intel cqm nmi context read                          :
  --- start ---
  test child forked, pid 1681
  parse_events failed
  test child finished with -2
  ---- end ----
  Test intel cqm nmi context read: Skip
  $

After:

  $ perf test -v cqm
  48: Test intel cqm nmi context read                          :
  --- start ---
  test child forked, pid 1681
  parse_events failed, is "intel_cqm/llc_occupancy/" available?
  test child finished with -2
  ---- end ----
  Test intel cqm nmi context read: Skip
  $

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-eidpiv5x4nkbsx37xwikbnir@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We were asking for a 4kHz sample_freq, making the test fail needlessly
when the system reduced /proc/sys/kernel/perf_event_max_sample_rate
below that.

Before:

  # perf test -vv dummy
  23: Test using a dummy software event to keep tracking       :
  --- start ---
  test child forked, pid 32421
  ------------------------------------------------------------
  perf_event_attr:
    type                             1
    size                             112
    config                           0x9
    { sample_period, sample_freq }   4000
    sample_type                      IP|TID|ID|PERIOD
  <SNIP>
  sys_perf_event_open failed, error -22
  Unable to open dummy and cycles event
  test child finished with -2
  ---- end ----
  Test using a dummy software event to keep tracking: Skip
  #
  [root@zoo ~]# cat /proc/sys/kernel/perf_event_max_sample_rate
  1000

After:

  [root@zoo ~]# perf test dummy
  23: Test using a dummy software event to keep tracking       : Ok

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-487iquegrs2379e5n0pi0tcp@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fixing this problem, introduced recently:

  $ perf test python
  16: Try 'import perf' in python, checking link problems      : FAILED!

In verbose mode we find out what is missing:

  $ perf test -v python
  16: Try 'import perf' in python, checking link problems      :
  --- start ---
  test child forked, pid 24894
  Traceback (most recent call last):
    File "<stdin>", line 1, in <module>
  ImportError: /tmp/build/perf/python/perf.so: undefined symbol: find_next_bit
  test child finished with -1
  ---- end ----
  Try 'import perf' in python, checking link problems: FAILED!
  $

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: f77b57ad ("perf cpu_map: Add cpu_map__new_event function")
Link: http://lkml.kernel.org/n/tip-rajx0zkz6czdrnvvwf0jp76p@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We're not looking at PERF_RECORD_SAMPLE entries and now by default we
use PERF_COUNT_SW_DUMMY, so just remove that setting.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-cly7cnotktv5rqao13pkorem@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

As we're test just the !PERF_RECORD_SAMPLE records.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qp8radcz3il4q9wbnseh337d@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

For case where all we need is an evlist with just an "dummy" evsel,
like in some 'perf test' entries.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-q52le0pblm2k3ncvyilelr9z@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We were asking for a 4kHz sample_freq, making the test fail needlessly
when the system reduced /proc/sys/kernel/perf_event_max_sample_rate
below that.

In this test we only look at the PERF_SAMPLE_TIME fields in PERF_RECORD_
meta events, no need to set sample_freq.

Thanks to Namhyung for suggesting that max_sample_rate could be the
reason for the test failure, seeing the 'perf test -vv' output I sent.

Before:

  # echo 1000 > /proc/sys/kernel/perf_event_max_sample_rate
  # perf test TSC
  45: Test converting perf time to TSC   : FAILED!

After:

  # perf test TSC
  45: Test converting perf time to TSC   : Ok
  # cat /proc/sys/kernel/perf_event_max_sample_rate
  1000

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-lcob05qhawkuvsyuu9g1fld5@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch fixes a bug in __perf_pmu__new_alias() whereby the
alias->snapshot field was not initialized to false. This led to random
alias->snapshot value for an alias and was breaking some measurements
such as:

  $ perf stat -a -e uncore_imc/data_reads/ -I 1000 sleep 100

Because the event ended up being treated as snapshot mode, when it is
not.
Signed-off-by: NStephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1452106201-13073-1-git-send-email-eranian@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding stat-cpi.py as an example of how to do stat scripting.

It computes the CPI metrics from cycles and instructions events.

The CPI is based performance metric showing the Cycles Per Instructions
ratio, which helps to identify cycles-hungry code.

Following stat record/report/script combinations could be used:

- get CPI for given workload

    $ perf stat -e cycles,instructions record ls

    SNIP

     Performance counter stats for 'ls':

             2,904,431      cycles
             3,346,878      instructions              #    1.15  insns per cycle

           0.001782686 seconds time elapsed

    $ perf script -s ./scripts/python/stat-cpi.py
           0.001783: cpu -1, thread -1 -> cpi 0.867803 (2904431/3346878)

    $ perf stat -e cycles,instructions record ls | perf script -s ./scripts/python/stat-cpi.py

    SNIP

           0.001730: cpu -1, thread -1 -> cpi 0.869026 (2928292/3369627)

- get CPI systemwide:

    $ perf stat -e cycles,instructions -a -I 1000 record sleep 3
    #           time             counts unit events
         1.000158618        594,274,711      cycles                     (100.00%)
         1.000158618        441,898,250      instructions
         2.000350973        567,649,705      cycles                     (100.00%)
         2.000350973        432,669,206      instructions
         3.000559210        561,940,430      cycles                     (100.00%)
         3.000559210        420,403,465      instructions
         3.000670798            780,105      cycles                     (100.00%)
         3.000670798            326,516      instructions

    $ perf script -s ./scripts/python/stat-cpi.py
           1.000159: cpu -1, thread -1 -> cpi 1.344823 (594274711/441898250)
           2.000351: cpu -1, thread -1 -> cpi 1.311972 (567649705/432669206)
           3.000559: cpu -1, thread -1 -> cpi 1.336669 (561940430/420403465)
           3.000671: cpu -1, thread -1 -> cpi 2.389178 (780105/326516)

    $ perf stat -e cycles,instructions -a -I 1000 record sleep 3 | perf script -s ./scripts/python/stat-cpi.py
           1.000202: cpu -1, thread -1 -> cpi 1.035091 (940778881/908885530)
           2.000392: cpu -1, thread -1 -> cpi 1.442600 (627493992/434974455)
           3.000545: cpu -1, thread -1 -> cpi 1.353612 (741463930/547766890)
           3.000622: cpu -1, thread -1 -> cpi 2.642110 (784083/296764)
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: NKan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452077397-31958-4-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

If no script is specified for stat data, display stat events in raw
form.

  $ perf stat record ls

  SNIP

   Performance counter stats for 'ls':

            0.851585      task-clock (msec)         #    0.717 CPUs utilized
                   0      context-switches          #    0.000 K/sec
                   0      cpu-migrations            #    0.000 K/sec
                 114      page-faults               #    0.134 M/sec
           2,620,918      cycles                    #    3.078 GHz
     <not supported>      stalled-cycles-frontend
     <not supported>      stalled-cycles-backend
           2,714,111      instructions              #    1.04  insns per cycle
             542,434      branches                  #  636.970 M/sec
              15,946      branch-misses             #    2.94% of all branches

         0.001186954 seconds time elapsed

  $ perf script
  CPU   THREAD             VAL             ENA             RUN            TIME EVENT
   -1    26185          851585          851585          851585         1186954 task-clock
   -1    26185               0          851585          851585         1186954 context-switches
   -1    26185               0          851585          851585         1186954 cpu-migrations
   -1    26185             114          851585          851585         1186954 page-faults
   -1    26185         2620918          853340          853340         1186954 cycles
   -1    26185               0               0               0         1186954 stalled-cycles-frontend
   -1    26185               0               0               0         1186954 stalled-cycles-backend
   -1    26185         2714111          853340          853340         1186954 instructions
   -1    26185          542434          853340          853340         1186954 branches
   -1    26185           15946          853340          853340         1186954 branch-misses
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: NKan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452077397-31958-3-git-send-email-jolsa@kernel.org
[ Rename 'time' parameter to 'tstamp' to fix build on older distros ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We can't convert u16 cpu_map_entries::cpu[x] value directly to int,
because it could hold -1, which would be converted as 65535.

Adding special treatment for -1, which is not real cpu number, to be
converted to (int -1).
Reported-by: NArnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452077397-31958-2-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add support to get stat events data in perf python scripts.

The python script shall implement the following new interface to process
stat data:

  def stat__<event_name>_[<modifier>](cpu, thread, time, val, ena, run):

    - is called for every stat event for given counter,
      if user monitors 'cycles,instructions:u" following
      callbacks should be defined:

      def stat__cycles(cpu, thread, time, val, ena, run):
      def stat__instructions_u(cpu, thread, time, val, ena, run):

  def stat__interval(time):

    - is called for every interval with its time,
      in non interval mode it's called after last
      stat event with total measured time in ns

The rest of the current interface stays untouched..

Please check example CPI metrics script in following patch
with command line examples in changelogs.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NKan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452028152-26762-8-git-send-email-jolsa@kernel.org
[ Rename 'time' parameters to 'tstamp', to fix the build in older distros ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Implement struct scripting_ops::(process_stat|process_stat_interval)
handlers - calling scripting handlers from stat events handlers.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NKan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452028152-26762-6-git-send-email-jolsa@kernel.org
[ Rename 'time' parameters to 'tstamp', to fix the build in older distros ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Python and perl scripting code will define those callbacks and get stat
data.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NKan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452028152-26762-5-git-send-email-jolsa@kernel.org
[ Rename 'time' parameters to 'tstamp', to fix the build in older distros ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding processing of stat config event and initialize stat_config
object.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NKan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452028152-26762-4-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding processing of cpu/threads maps. Configuring session's evlist with
these maps.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NKan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452028152-26762-3-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

For pipe sessions we need to keep sample_type zero, because script's
perf_evsel__check_attr is triggered by sample_type != 0, and the check
would fail on stat session.

I was tempted to keep it zero unconditionally, but the pipe session is
sufficient. In perf.data session we are guarded by HEADER_STAT feature.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452028152-26762-2-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1451991518-25673-3-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When a perf.data file has multiple events, it's likely to be similar
(tracepoint) events.  In that case, they might have same field name so
add all of them to sort keys instead of bailing out.
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1451991518-25673-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Using FEATURE-DUMP in bpf subproject for features detection in case bpf
is built via perf. Keeping the current features detection otherwise.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NWang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama <pi3orama@163.com>
Link: http://lkml.kernel.org/r/1450893514-9158-6-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Changing the contents of the FEATURE-DUMP file, so it looks like:

  feature-backtrace=1
  feature-dwarf=0
  feature-fortify-source=1
  feature-sync-compare-and-swap=0

This way it could get included in sub projects, so they won't be forced
to redo features detection.

Also now storing the complete set of features.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NWang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama <pi3orama@163.com>
Link: http://lkml.kernel.org/r/1450893514-9158-5-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The feature_assign macro generates feature value
assignment for name, like:

  $(call feature_assign,dwarf) == feature-dwarf=1

This will be used more in following patches.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NWang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama <pi3orama@163.com>
Link: http://lkml.kernel.org/r/1450893514-9158-4-git-send-email-jolsa@kernel.org
[ Rename it to feature_assign, the original shorter name was misleading, to say the least ;-) ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We decide what dwarf unwind to choose way after the Makefile.feature
makefile is included. The $(dwarf-post-unwind) is not even set at that
time. For the same reason it was never included in FEATURE-DUMP file.

Moving it into perf VF=1 verbose display.

  $ make VF=1
    BUILD:   Doing 'make -j4' parallel build
  Auto-detecting system features:
  ...                         dwarf: [ on  ]
  ...
  ...                 LIBUNWIND_DIR:
  ...                     LIBDW_DIR:
  ...     DWARF post unwind library: libunwind
  ...
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NWang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama <pi3orama@163.com>
Link: http://lkml.kernel.org/r/1450893514-9158-3-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>