Using == to check for 180 degree rotation only works as long as the
reflection bits aren't set. That will change soon enough for CHV, so
let's stop doing things the wrong way.

v2: Drop the BIT()
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479142440-25283-2-git-send-email-ville.syrjala@linux.intel.com

Because it's shorter, easier to read, newer and cooler. And I don't
think anybody else has pending FBC patches right now, so the conflicts
should be minimal.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478883461-20201-8-git-send-email-paulo.r.zanoni@intel.com

Use drm_atomic_get_existing_crtc_state() instead of looping through
the CRTC states and checking if the FBC CRTC is there.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478883461-20201-6-git-send-email-paulo.r.zanoni@intel.com

It only has two checks now, so it makes sense to just move the code to
the caller.

Also take this opportunity to make no_fbc_reason make more sense: now
we'll only list "no suitable CRTC for FBC" instead of maybe giving a
reason why the last CRTC we checked was not selected, and we'll more
consistently set the reason (e.g., if no primary planes are visible).
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478883461-20201-5-git-send-email-paulo.r.zanoni@intel.com

Extract that part of the code to a new function and call this function
only once during intel_fbc_choose_crtc() instead of once per plane.
Those checks are independent from planes/CRTCs.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478883461-20201-4-git-send-email-paulo.r.zanoni@intel.com

Much simpler. Thanks to Ville for pointing this.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478883461-20201-3-git-send-email-paulo.r.zanoni@intel.com

We can just call it earlier, so do it. The goal of the loop is to get
the plane's CRTC state, and we don't need it in order to call
intel_fbc_can_choose().
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478883461-20201-2-git-send-email-paulo.r.zanoni@intel.com

When supplying a view to vma_compare() it is required that the supplied
i915_address_space is the global GTT. I tested the VMA instead (which is
the current position in the rbtree and maybe from any address space).

(This reapplies commit a44342ac ("drm/i915: Fix test on inputs for
vma_compare()") as it was lost in the vma split)
Reported-by: NMatthew Auld <matthew.auld@intel.com>
Tested-by: NMatthew Auld <matthew.auld@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98579
Fixes: db6c2b41 ("drm/i915: Store the vma in an rbtree...")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161103200852.23431-1-chris@chris-wilson.co.ukReviewed-by: NMatthew Auld <matthew.auld@intel.com>
Reported-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Fixes: b42fe9ca ("drm/i915: Split out i915_vma.c")
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

The previous spec version said "double Ytile planes minimum lines",
and I interpreted this as referring to what the spec calls "Y tile
minimum", but in fact it was referring to what the spec calls "Minimum
Scanlines for Y tile". I noticed that Mahesh Kumar had a different
interpretation, so I sent and email to the spec authors and got
clarification on the correct meaning. Also, BSpec was updated and
should be clear now.

Fixes: ee3d532f ("drm/i915/gen9: unconditionally apply the memory bandwidth WA")
Cc: stable@vger.kernel.org
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478636531-6081-1-git-send-email-paulo.r.zanoni@intel.com

My heuristic for detecting type 1 DVI DP++ adaptors based on the VBT
port information apparently didn't survive the reality of buggy VBTs.
In this particular case we have a machine with a natice HDMI port, but
the VBT tells us it's a DP++ port based on its capabilities.

The dvo_port information in VBT does claim that we're dealing with a
HDMI port though, but we have other machines which do the same even
when they actually have DP++ ports. So that piece of information alone
isn't sufficient to tell the two apart.

After staring at a bunch of VBTs from various machines, I have to
conclude that the only other semi-reliable clue we can use is the
presence of the AUX channel in the VBT. On this particular machine
AUX channel is specified as zero, whereas on some of the other machines
which listed the DP++ port as HDMI have a non-zero AUX channel.

I've also seen VBTs which have dvo_port a DP but have a zero AUX
channel. I believe those we need to treat as DP ports, so we'll limit
the AUX channel check to just the cases where dvo_port is HDMI.

If we encounter any more serious failures with this heuristic I think
we'll have to have to throw it out entirely. But that could mean that
there is a risk of type 1 DVI dongle users getting greeted by a
black screen, so I'd rather not go there unless absolutely necessary.

v2: Remove the duplicate PORT_A check (Daniel)
    Fix some typos in the commit message

Cc: Daniel Otero <daniel.otero@outlook.com>
Cc: stable@vger.kernel.org
Tested-by: NDaniel Otero <daniel.otero@outlook.com>
Fixes: d6199256 ("drm/i915: Determine DP++ type 1 DVI adaptor presence based on VBT")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97994Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478884464-14251-1-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The term "preliminary hardware support" has always caused confusion both
among users and developers. It has always been about preliminary driver
support for new hardware, and not so much about preliminary hardware. Of
course, initially both the software and hardware are in early stages,
but the distinction becomes more clear when the user picks up production
hardware and an older kernel to go with it, with just the early support
we had for the hardware at the time the kernel was released. The user
has to specifically enable the alpha quality *driver* support for the
hardware in that specific kernel version.

Rename preliminary_hw_support to alpha_support to emphasize that the
module parameter, config option, and flag are about software, not about
hardware. Improve the language in help texts and debug logging as well.

This appears to be a good time to do the change, as there are currently
no platforms with preliminary^W alpha support.

Cc: Rob Clark <robdclark@gmail.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477909108-18696-1-git-send-email-jani.nikula@intel.com

Update i915_driver_load kerneldoc to match code.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478784994-2494-2-git-send-email-joonas.lahtinen@linux.intel.com

When we release the shmem backing storage, we make sure that the pages
are coherent with the cpu cache. However, our clflush routine was
skipping the flush as the object had no pages at release time. Fix this by
explicitly flushing the sg_table we are decoupling.

Fixes: 03ac84f1 ("drm/i915: Pass around sg_table to get_pages/put_pages backend")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161111145809.9701-2-chris@chris-wilson.co.uk

In order to walk the list of all timelines, we currently require the
struct_mutex. We are sometimes called prior to the struct_mutex being
taken by the caller (i.e !I915_WAIT_LOCKED) in which case we can only
trust the global execution timelines (as these are owned by the device).
This means in the unlocked phase we can only wait upon the currently
executing requests and not all queued.

[  175.743243] general protection fault: 0000 [#1] SMP
[  175.743263] Modules linked in: nls_iso8859_1 intel_rapl x86_pkg_temp_thermal coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel iwlwifi aesni_intel aes_x86_64 lrw snd_soc_rt5640 gf128mul snd_soc_rl6231 snd_soc_core glue_helper snd_compress snd_pcm_dmaengine snd_hda_codec_hdmi ablk_helper snd_hda_codec_realtek cryptd snd_hda_codec_generic serio_raw cfg80211 snd_hda_intel snd_hda_codec ir_lirc_codec snd_hda_core lirc_dev snd_hwdep snd_pcm lpc_ich mei_me mei snd_seq_midi shpchp snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device snd_timer rc_rc6_mce acpi_als nuvoton_cir kfifo_buf rc_core snd industrialio snd_soc_sst_acpi soundcore snd_soc_sst_match i2c_designware_platform 8250_dw i2c_designware_core dw_dmac spi_pxa2xx_platform mac_hid acpi_pad parport_pc ppdev lp parport
[  175.743509]  autofs4 i915 e1000e psmouse ptp pps_core xhci_pci ehci_pci ahci xhci_hcd ehci_hcd libahci video sdhci_acpi sdhci i2c_hid hid
[  175.743560] CPU: 2 PID: 2386 Comm: wtdg_monitor.sh Tainted: G     U          4.9.0-rc4-nightly+ #2
[  175.743581] Hardware name:                  /NUC5i7RYB, BIOS RYBDWi35.86A.0358.2016.0606.1423 06/06/2016
[  175.743603] task: ffff88024509ba80 task.stack: ffffc9007bd18000
[  175.743618] RIP: 0010:[<ffffffffa01af29b>]  [<ffffffffa01af29b>] i915_gem_wait_for_idle+0x3b/0x140 [i915]
[  175.743660] RSP: 0000:ffffc9007bd1b9b8  EFLAGS: 00010297
[  175.743674] RAX: ffff88024489d248 RBX: 0000000000000000 RCX: 0000000000000000
[  175.743691] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880244898000
[  175.743708] RBP: ffffc9007bd1b9f0 R08: 0000000000000000 R09: 0000000000000001
[  175.743724] R10: 00000028eaf42792 R11: 0000000000000001 R12: dead000000000100
[  175.743741] R13: dead000000000148 R14: ffffc9007bd1ba5f R15: 0000000000000005
[  175.743758] FS:  00007f2638330700(0000) GS:ffff880256d00000(0000) knlGS:0000000000000000
[  175.743777] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  175.743791] CR2: 00007f885c8cea40 CR3: 00000002416b5000 CR4: 00000000003406e0
[  175.743808] Stack:
[  175.743816]  ffff88024489d248 000000004509ba80 ffff880244898000 ffff88024509ba80
[  175.743840]  00000000ffff8b69 ffffc9007bd1ba5f ffffc9007bd1ba5e ffffc9007bd1ba28
[  175.743863]  ffffffffa01b661d 00000000ffffffff 0000000000000000 ffff880244898000
[  175.743886] Call Trace:
[  175.743906]  [<ffffffffa01b661d>] i915_gem_shrinker_lock_uninterruptible.constprop.5+0x5d/0xc0 [i915]
[  175.743937]  [<ffffffffa01b6cd0>] i915_gem_shrinker_oom+0x30/0x1b0 [i915]
[  175.743955]  [<ffffffff8109ca79>] notifier_call_chain+0x49/0x70
[  175.743971]  [<ffffffff8109cd9d>] __blocking_notifier_call_chain+0x4d/0x70
[  175.743988]  [<ffffffff8109cdd6>] blocking_notifier_call_chain+0x16/0x20
[  175.744005]  [<ffffffff811885dc>] out_of_memory+0x22c/0x480
[  175.744020]  [<ffffffff81205542>] __alloc_pages_slowpath+0x851/0x8ec
[  175.744037]  [<ffffffff8118ca51>] __alloc_pages_nodemask+0x2c1/0x310
[  175.744054]  [<ffffffff811d8ea8>] alloc_pages_current+0x88/0x120
[  175.744070]  [<ffffffff811833a4>] __page_cache_alloc+0xb4/0xc0
[  175.744086]  [<ffffffff811865ca>] filemap_fault+0x29a/0x500
[  175.744101]  [<ffffffff81299aa6>] ext4_filemap_fault+0x36/0x50
[  175.744117]  [<ffffffff811b3d4a>] __do_fault+0x6a/0xe0
[  175.744131]  [<ffffffff811b97ee>] handle_mm_fault+0xd0e/0x1330
[  175.744147]  [<ffffffff8106738c>] __do_page_fault+0x23c/0x4d0
[  175.744162]  [<ffffffff81067650>] do_page_fault+0x30/0x80
[  175.744177]  [<ffffffff817ffbe8>] page_fault+0x28/0x30
[  175.744191] Code: 41 57 41 56 41 55 41 54 53 48 83 ec 10 4c 8b a7 48 52 00 00 89 75 d4 48 89 45 c8 49 39 c4 74 78 4d 8d 6c 24 48 41 bf 05 00 00 00 <49> 8b 5d 00 48 85 db 74 50 8b 83 20 01 00 00 85 c0 74 15 48 8b
[  175.744320] RIP  [<ffffffffa01af29b>] i915_gem_wait_for_idle+0x3b/0x140 [i915]
[  175.744351]  RSP <ffffc9007bd1b9b8>

Fixes: 80b204bc ("drm/i915: Enable multiple timelines")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161111145809.9701-1-chris@chris-wilson.co.uk

Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478270568-7902-2-git-send-email-tvrtko.ursulin@linux.intel.com

After this patch only conversion of INTEL_INFO(p)->gen to
INTEL_GEN(dev_priv) remains before the __I915__ macro can
be removed.

v2: Tidy vlv_compute_wm. (David Weinehall)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@linux.intel.com>

A small selection of macros which can only accept dev_priv from
now on and a resulting trickle of fixups.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@linux.intel.com>

A small selection of macros which can only accept dev_priv from
now on and a resulting trickle of fixups.

v2: Keep original order. (Ville Syrjala)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@linux.intel.com>

A small selection of macros which can only accept dev_priv from
now on and a resulting trickle of fixups.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@linux.intel.com>

As a side product, had to split two other files;
- i915_gem_fence_reg.h
- i915_gem_object.h (only parts that needed immediate untanglement)

I tried to move code in as big chunks as possible, to make review
easier. i915_vma_compare was moved to a header temporarily.

v2:
- Use i915_gem_fence_reg.{c,h}

v3:
- Rebased

v4:
- Fix building when DEBUG_GEM is enabled by reordering a bit.

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478861034-30643-1-git-send-email-joonas.lahtinen@linux.intel.com

Merge tag 'gvt-next-kvmgt-framework' of https://github.com/01org/gvt-linux into drm-intel-next-queued

Zhenyu Wang writes:

gvt-next-kvmgt-framework

This adds initial KVMGT framework based on GVT-g MPT(Mediated Passthrough) interface.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

At the moment we allocate enough sg table entries assuming we
will not be able to do any coalescing. But since in practice
we most often can, and more so very effectively, this ends up
wasting a lot of memory.

A simple and effective way of trimming the over-allocated
entries is to copy the table over to a new one allocated to the
exact size.

Experiments on my freshly logged and idle desktop (KDE) showed
that by doing this we can save approximately 1 MiB of RAM, or
when running a typical benchmark like gl_manhattan I have
even seen a 6 MiB saving.

More complicated techniques such as only copying the last used
page and freeing the rest are left to the reader.

v2:
 * Update commit message.
 * Use temporary sg_table on stack. (Chris Wilson)

v3:
 * Commit message update.
 * Comment added.
 * Replace memcpy with copy assignment.
   (Chris Wilson)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478704423-7447-1-git-send-email-tvrtko.ursulin@linux.intel.com

KVMGT is the MPT implementation based on VFIO/KVM. It provides
a kvmgt_mpt ops to gvt for vGPU access mediation, e.g. to
mediate and emulate the MMIO accesses, to inject interrupts
to vGPU user, to intercept the GTT writing and replace it with
DMA-able address, to write-protect guest PPGTT table for
shadowing synchronization, etc. This patch provides the MPT
implementation for GVT, not yet functional due to theabsence
of mdev.

It's built as kvmgt.ko, depends on vfio.ko, kvm.ko and mdev.ko,
and being required by i915.ko. To not introduce hard dependency
in i915.ko, we used indirect symbol reference. But that means
users have to include kvmgt.ko into init ramdisk if their
i915.ko is included.
Signed-off-by: NKevin Tian <kevin.tian@intel.com>
Signed-off-by: NXiaoguang Chen <xiaoguang.chen@intel.com>
Signed-off-by: NJike Song <jike.song@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

There are currently 4 methods in intel_gvt_io_emulation_ops
to emulate CFG/MMIO reading/writing for intel vGPU. A possibly
better scope is: add 3 more methods for vgpu create/destroy/reset
respectively, and rename the ops to 'intel_gvt_ops', then pass
it to the MPT module (say the future kvmgt) to use: they are
all methods for external usage.
Signed-off-by: NJike Song <jike.song@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Hypervisors are different, the MPT ops is a only superset of
all possibly supported hypervisors. There might be other way
out of the MPT to achieve same target. e.g. vfio-based kvmgt
won't provide map_gfn_to_mfn method to establish guest EPT
mapping for aperture, since it will be done in QEMU/KVM, MMIO
is also trapped elsewhere, etc.
Signed-off-by: NJike Song <jike.song@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

GVT host needs init/exit hooks to do some initialization/cleanup
work, e.g.: vfio mdev host device register/unregister.
Signed-off-by: NJike Song <jike.song@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Current GVT contains some obsolete logic originally cooked to
support the old, non-vfio kvmgt, which is actually workarounds.
We don't support that anymore, so it's safe to remove it and
make a better framework.
Signed-off-by: NJike Song <jike.song@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

By providing predefined vGPU types, users can choose which type a vgpu
to create and use, without specifying detailed parameters.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NJike Song <jike.song@intel.com>

kmap_atomic doesn't allow sleep until unmapped. However,
it's necessary to allow sleep during reading/writing guest
memory, so use kmap instead.
Signed-off-by: NBing Niu <bing.niu@intel.com>
Signed-off-by: NXiaoguang Chen <xiaoguang.chen@intel.com>
Signed-off-by: NJike Song <jike.song@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

On guest writing a PPGTT entry, if it contains value and the old
entry is valid, gvt will read it and find & free the corresponding
old data for it. However, with the KVM write protection provided
by page_track, the guest entry will be written with new value
before gvt handling. To avoid that, we should use the shadow
entry instead.
Signed-off-by: NBing Niu <bing.niu@intel.com>
Signed-off-by: NJike Song <jike.song@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Paulo Bonzini writes:

The three KVM patches that KVMGT needs.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

When we need to reset the global seqno on wraparound, we have to wait
until the current rbtrees are drained (or otherwise the next waiter will
be out of sequence). The current mechanism to kick and spin until
complete, may exit too early as it would break if the target thread was
currently running. Instead, we must wake up the threads, but keep
spinning until the trees have been deleted.

In order to appease Tvrtko, busy spin rather than yield().
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161108143719.32215-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

This gets rid of a warning that the connectors are used without locking
when doing a nonblocking modeset.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-11-git-send-email-maarten.lankhorst@linux.intel.com

All of this state should be updated as soon as possible. It shouldn't be
done later because then future updates may not depend on it.

Changes since v1:
- Move the modeset update to before drm_atomic_state_get. (Ville)
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-10-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

The only user was i915, which is now gone.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Dave Airlie <airlied@redhat.com> #irc
Cc: dri-devel@lists.freedesktop.org
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-9-git-send-email-maarten.lankhorst@linux.intel.com

drm_select_eld requires mode_config.mutex and connection_mutex
because it looks at the connector list and at the legacy encoders.

This is not required, because when we call audio_codec_enable we know
which connector it was called for, so pass the state.

This also removes having to look at crtc->config.

Changes since v1:
- Use intel_crtc->pipe instead of drm_crtc_index. (Ville)
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-8-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

This is the last connector still looking at crtc->config. Fix this.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-7-git-send-email-maarten.lankhorst@linux.intel.com

The newly added assert_kernel_context_is_current introduces a warning
when built with W=1:

drivers/gpu/drm/i915/i915_gem.c: In function ‘assert_kernel_context_is_current’:
drivers/gpu/drm/i915/i915_gem.c:4417:63: error: suggest braces around empty body in an ‘else’ statement [-Werror=empty-body]

Changing the GEM_BUG_ON() macro from an empty definition to "do { } while (0)"
makes the macro more robust to use and avoids the warning.

Fixes: 3033acab ("drm/i915: Queue the idling context switch after all other timelines")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161108135834.2166677-1-arnd@arndb.de

gvt-next-2016-11-07

- Fix regression from e95433c7
- Some MMIO handler fixes
- Add better handling for guest reset control
- stratch page table tree for shadow ppgtt
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

The code to determine the primary plane offset for gen2/3 looks
different than the code for gen4+, but in fact it's doing the same
thing. Let's make it uniform. Allows us to eliminate the 'obj' from
the list of local variables as well.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478550057-24864-6-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>