No need to cater for old A revisions.
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487172099-24873-4-git-send-email-jani.nikula@intel.com

No need to cater for old A revisions.
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487172099-24873-3-git-send-email-jani.nikula@intel.com

No need to cater for old A revisions.
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487172099-24873-2-git-send-email-jani.nikula@intel.com

MIPI Video Mode for high res panels (requiring dual link), need a
8X/3 divider to be programmed as 0x2. Modifying the same
in this patch.
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NVidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486551058-22596-3-git-send-email-vidya.srinivas@intel.com

Panel GPIO control should be done based on platform. Add a check
to restrict VLV and CHT specific GPIO confirguration, so that
they dont apply to other platforms.

The VBT spec fails to mention the PMIC backlight control option is valid
only for VLV/CHT, and the field may be set to "PMIC" for BXT even if
PMIC is not desired or possible.
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NVidya Srinivas <vidya.srinivas@intel.com>
[Jani: amended commit message a bit and fixed indentation.]
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486551058-22596-2-git-send-email-vidya.srinivas@intel.com

The max link parameters should be set/reset only on HPD or
connected boot case or on system resume.

Add a flag reset_link_params to intel_dp to decide when
to reset the max link parameters. This prevents the parameters
from getting reset/overwritten through all other
connector->funcs->detect() calls. This is important when link
training fails and the max link params are modified to the
lower fallback values.

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486515251-23469-1-git-send-email-manasi.d.navare@intel.com

Make checkpatch happy and make the use of u32/u64 consistent throughout
i915_gem_gtt.[ch]
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-23-chris@chris-wilson.co.uk

Use an invalid filp so that the aliasing_ppgtt can be clearly
identified.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-22-chris@chris-wilson.co.uk

As the aliasing GTT is only accessed via the global GTT, we will never
use more of it than we expose via the Global GTT and so we only need to
preallocate sufficient space within the ppgtt for the full GTT. Equally,
if the aliasing GTT is smaller than the global GTT, we have a serious
issue and must bail.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-21-chris@chris-wilson.co.uk

Once upon a time, back in the UMS days, we supported userspace
initialising the GTT and sharing portions of the GTT with other users.
Now, we own the GTT (both global and per-process) and the tables always
start at 0 - so we can remove i915_address_space.start and forget about
this old complication.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-20-chris@chris-wilson.co.uk

We never assign or use the ppgtt->enable() callback, so remove it.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-19-chris@chris-wilson.co.uk

The tracepoints are now entirely synonymous with binding and unbinding the
VMA (and the tracepoints there).
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-18-chris@chris-wilson.co.uk

We want to reload the PDP (and flush the TLB) when the addresses are
changed.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-17-chris@chris-wilson.co.uk

The barrier here is not required - we apply the barrier before the range
is ever reused by the GPU instead.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-16-chris@chris-wilson.co.uk

We only operate on known extents (both for alloc/clear) and so we can use
both the knowledge of the bind/unbind range along with the knowledge of
the existing pagetable to avoid having to allocate temporary and
auxiliary bitmaps.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-15-chris@chris-wilson.co.uk

We only operate on known extents (both for alloc/clear) and so we can use
both the knowledge of the bind/unbind range along with the knowledge of
the existing pagetable to avoid having to allocate temporary and
auxiliary bitmaps.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-14-chris@chris-wilson.co.uk

We only operate on known extents (both for alloc/clear) and so we can use
both the knowledge of the bind/unbind range along with the knowledge of
the existing pagetable to avoid having to allocate temporary and
auxiliary bitmaps.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-13-chris@chris-wilson.co.uk

We only operate on known extents (both for alloc/clear) and so we can use
both the knowledge of the bind/unbind range along with the knowledge of
the existing pagetable to avoid having to allocate temporary and
auxiliary bitmaps.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99295Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Reviewed-by: NMichał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-12-chris@chris-wilson.co.uk

Stop passing around unused parameters makes the code more compact.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-11-chris@chris-wilson.co.uk

Upon creation of the va range, it is initialised to point at scratch.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-10-chris@chris-wilson.co.uk

The hardware does not cope very well with us changing the PD within an
active context (the context must be idle for it to re-read the PD). As
we only check whether the page is idle before changing the entry (and on
through the PD tree), we cannot reliably replace PD entries on
gen6/gen7. To fully avoid changing the tree at runtime, preallocate it
on init.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-9-chris@chris-wilson.co.uk

In the future, we need to call allocate_va_range on the aliasing-ppgtt
which means moving the call down from the vma into the vm (which is
more appropriate for calling the vm function).
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-8-chris@chris-wilson.co.uk

As these are now both plain and simple kmap_atomic/kunmap_atomic pairs,
we can remove the wrappers for a small gain of clarity (in particular,
not hiding the atomic critical sections!).
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-7-chris@chris-wilson.co.uk

We flush the entire page every time we update a few bytes, making the
update of a page table many, many times slower than is required. If we
create a WC map of the page for our updates, we can avoid the clflush
but incur additional cost for creating the pagetable. We amoritize that
cost by reusing page vmappings, and only changing the page protection in
batches.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>

Similar to how we already split the bind_vma for ggtt/aliasing_gtt, also
split up the unbind for symmetry.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-5-chris@chris-wilson.co.uk

The aliasing_ppgtt is a regular ppgtt, and we can use the regular
i915_ppgtt_put() to properly tear it down.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-4-chris@chris-wilson.co.uk

Improve the sg iteration and in hte process eliminate a bug in
miscomputing the pml4 length as orig_nents<<PAGE_SHIFT is no longer the
full length of the sg table.

v2: Check for the end of the fourth level page table (the final pdpe)
and move onto the next.
v3: Assert that 3lvl insert_pte_entries doesn't overflow its smaller set
of PDP.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-3-chris@chris-wilson.co.uk

Inline the address computation to avoid the vfunc call for every page.
We still have to pay the high overhead of sg_page_iter_next(), but now
at least GCC can optimise the inner most loop, giving a significant
boost to some thrashing Unreal Engine workloads.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-2-chris@chris-wilson.co.uk

The predominant VMA class is normal GTT, so allow gcc to emphasize that
path and avoid unnecessary stack movement.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170215084357.19977-1-chris@chris-wilson.co.uk

If there is no OPREGION_ASLE_EXT then a VBT stored in mailbox #4 may
use the ASLE_EXT parts of the opregion. Adjust the vbt_size calculation
for a vbt in mailbox #4 for this.

This fixes the driver not finding the VBT on a jumper ezpad mini3
cherrytrail tablet and on a ACER SW5_017 machine.

Cc: stable@vger.kernel.org
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487088758-30050-1-git-send-email-jani.nikula@intel.com

intel_ring_workarounds_emit is exactly the same code.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170214150017.16058-1-tvrtko.ursulin@linux.intel.com

Currently we apply the jump to rpe if we are below it and the GPU needs
more power. For some GPUs, the rpe is 75% of the maximum range causing
us to dramatically overshoot low power applications *and* unable to
reach the low frequency that can most efficiently deliver their
workload.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210150348.22146-3-chris@chris-wilson.co.ukReviewed-by: NRadoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>

If we receive a DOWN_TIMEOUT rps interrupt, we respond by reducing the
GPU clocks significantly. Before we do, double check that the frequency
we pick is actually a decrease.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210150348.22146-2-chris@chris-wilson.co.ukReviewed-by: NRadoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>

When the RPS tuning was applied to Baytrail, in commit 8fb55197
("drm/i915: Agressive downclocking on Baytrail"), concern was given that
it might cause Cherryview excess wakeups of the common power well.
However, the static thresholds perform poorly for Kodi, and the GPU is
unable to deliver the video frames on time. Enabling the dynamic, finer
thresholds used on all other platforms (including Skylake and Broxton
that also have the same multiple powerwell concerns) allows the GPU to
pick a more appropriate frequency and not drop frames.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170210150348.22146-1-chris@chris-wilson.co.ukReviewed-by: NRadoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>

Once upon a time before we had automated GPU state capture upon hangs,
we had intel_gpu_dump. Now we come almost full circle and reinstate that
view of the current GPU queues and registers by using the error capture
facility to snapshot the GPU state when debugfs/.../i915_gpu_info is
opened - which should provided useful debugging to both the error
capture routines (without having to cause a hang and avoid the error
state being eaten by igt) and generally.

v2: Rename drm_i915_error_state to i915_gpu_state to alleviate some name
collisions between the error state dump and inspecting the gpu state.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170214164611.11381-1-chris@chris-wilson.co.uk

We no longer need to take the struct_mutex for freeing objects, and on
the finalisation paths here the mutex is not been used for serialisation
of the pointer access, so remove the BKL wart.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170214133420.7977-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

In general, the compiler should not be able to detect if we do any
passes through the test loops:

	In file included from drivers/gpu/drm/i915/i915_gem.c:5029:
	drivers/gpu/drm/i915/selftests/i915_gem_coherency.c: In function 'igt_gem_coherency':
	drivers/gpu/drm/i915/selftests/i915_gem_coherency.c:274: error: 'err' may be used uninitialized in this function
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170214143509.15719-1-chris@chris-wilson.co.ukReviewed-by: NMatthew Auld <matthew.auld@intel.com>

gcc-4.7 spotted that

In file included from drivers/gpu/drm/i915/i915_gem_gtt.c:3791:0:
drivers/gpu/drm/i915/selftests/i915_gem_gtt.c: In function ‘pot_hole’:
drivers/gpu/drm/i915/selftests/i915_gem_gtt.c:594:6: error: ‘err’ may be used uninitialized in this function [-Werror=maybe-uninitialized]

So set it to 0 should we ever skip over a hole smaller than a few pages.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170214113756.27834-1-chris@chris-wilson.co.ukReviewed-by: NMatthew Auld <matthew.auld@intel.com>

When using the mock_ppgtt selftest, the GTT is large enough to cause an
overflow in pot_hole() when adding 2 pages to the address. Avoid the
overflow by computing the final valid address and iterating up to that
address.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170214092344.12330-1-chris@chris-wilson.co.ukReviewed-by: NMatthew Auld <matthew.auld@intel.com>

With latest Punit FW, vgg input voltag drop falling to minimum is fixed.
So reverting the WA patch & moving to turbo freq opreation range to [RPn -> RP0]

This is not a 1:1 revert of the commit 5b7c91b7.
You can refer to commit 5b5929cb ("drm/i915/chv: remove
pre-production hardware workarounds") as the reason for the discrepancy

commit 5b7c91b7
Author: Deepak S <deepak.s@linux.intel.com>
Date:   Sat May 9 18:15:46 2015 +0530

    drm/i915/chv: Set min freq to efficient frequency on chv

v2: Fix inconsistent return type. (Chris)
v3: drop pre-production hw case (Ville)
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDeepak S <deepak.s@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471007801-86075-1-git-send-email-deepak.s@linux.intel.comReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>