Update the compressed boot Makefile for ARM to
remove files during clean.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Using the parent functions frame pointer to access our arguments is
completely wrong, whether or not we're building with frame pointers
or not.  What we should be using is the stack pointer to get at the
word above the registers we stacked ourselves.
Reported-by: NBosko Radivojevic <bosko.radivojevic@gmail.com>
Tested-by: NBosko Radivojevic <bosko.radivojevic@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

qnap_tsx1x_register_flash is only called by qnap_ts219_init and
qnap_ts41x_init which both live in .init.text, too.  So the move is OK.

This fixes the following warning in kirkwood_defconfig:
	WARNING: vmlinux.o(.text+0x9334): Section mismatch in reference from the function qnap_tsx1x_register_flash() to the variable .init.data:qnap_tsx1x_spi_slave_info
	The function qnap_tsx1x_register_flash() references
	the variable __initdata qnap_tsx1x_spi_slave_info.
	This is often because qnap_tsx1x_register_flash lacks a __initdata
	annotation or the annotation of qnap_tsx1x_spi_slave_info is wrong.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: NNicolas Pitre <nico@fluxnic.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

the different putc variants used an initialized local static variable
which is broken since

	5de813b6 (ARM: Eliminate decompressor -Dstatic= PIC hack)

This needs to be initialized at runtime and so needs to be global.
While at it give it a better name.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

We need mach/hardware.h for CLPS7111_VIRT_BASE.
Signed-off-by: NJeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

We need a waituart macro.
Signed-off-by: NJeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

mov rx, =<immediate> isn't valid, use #<immediate> instead.
Signed-off-by: NJeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

We need asm/memory.h for NS9XXX_CSxSTAT_PHYS (via mach/memory.h).
Signed-off-by: NJeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

IO_BASE shoule be IO_VIRT, and IO_START should be IO_PHYS. We also need
mach/hardware.h for these definitions.
Signed-off-by: NJeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Delete a wrong redundant right parenthesis in
arch/arm/mach-footbridge/common.c
Signed-off-by: NWan ZongShun <mcuos.com@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch is to fix nuc900 touchscreen clk definition bug,the .dev_id's
name should be 'nuc900-ts', it should be the same to pdev.name. or else,
the touchscreen driver will be not working well due to clock engine disabled.
Signed-off-by: NWan ZongShun <mcuos.com@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/r600: fix possible NULL pointer derefernce
  drm/radeon/kms: add quirk for ASUS HD 3600 board
  include/linux/vgaarb.h: add missing part of include guard
  drm/nouveau: Fix crashes during fbcon init on single head cards.
  drm/nouveau: fix pcirom vbios shadow breakage from acpi rom patch
  drm/radeon/kms: fix shared ddc harder
  drm/i915: enable low power render writes on GEN3 hardware.
  drm/i915: Define MI_ARB_STATE bits
  vmwgfx: return -EFAULT if copy_to_user fails
  fb: handle allocation failure in alloc_apertures()
  drm: radeon: check kzalloc() result
  drm/ttm: Fix build on architectures without AGP
  drm/radeon/kms: fix gtt MC base alignment on rs4xx/rs690/rs740 asics
  drm/radeon/kms: fix possible mis-detection of sideport on rs690/rs740
  drm/radeon/kms: fix legacy tv-out pal mode

Reported-by: NAlexander Y. Fomichev <git.user@gmail.com>
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Connector is actually DVI rather than HDMI.
Reported-by: NtrapDoor <trapdoor6@gmail.com>
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

vgaarb.h was missing the #define of the #ifndef at the top for the guard
to prevent multiple #include's from causing re-define errors
Signed-off-by: NDoug Goldstein <cardoe@gentoo.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: do not include cap/dentry releases in replayed messages
  ceph: reuse request message when replaying against recovering mds
  ceph: fix creation of ipv6 sockets
  ceph: fix parsing of ipv6 addresses
  ceph: fix printing of ipv6 addrs
  ceph: add kfree() to error path
  ceph: fix leak of mon authorizer
  ceph: fix message revocation

* 'linuxdocs' of git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs:
  documentation: fix almost duplicate filenames (IO/io-mapping.txt)

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (24 commits)
  bridge: Partially disable netpoll support
  tcp: fix crash in tcp_xmit_retransmit_queue
  IPv6: fix CoA check in RH2 input handler (mip6_rthdr_input())
  ibmveth: lost IRQ while closing/opening device leads to service loss
  rt2x00: Fix lockdep warning in rt2x00lib_probe_dev()
  vhost: avoid pr_err on condition guest can trigger
  ipmr: Don't leak memory if fib lookup fails.
  vhost-net: avoid flush under lock
  net: fix problem in reading sock TX queue
  net/core: neighbour update Oops
  net: skb_tx_hash() fix relative to skb_orphan_try()
  rfs: call sock_rps_record_flow() in tcp_splice_read()
  xfrm: do not assume that template resolving always returns xfrms
  hostap_pci: set dev->base_addr during probe
  axnet_cs: use spin_lock_irqsave in ax_interrupt
  dsa: Fix Kconfig dependencies.
  act_nat: not all of the ICMP packets need an IP header payload
  r8169: incorrect identifier for a 8168dp
  Phonet: fix skb leak in pipe endpoint accept()
  Bluetooth: Update sec_level/auth_type for already existing connections
  ...

If a single-threaded process does a file-descriptor operation, and some
other process accesses that same file descriptor via /proc, the current
rcu_dereference_check_fdtable() can give a false-positive RCU-lockdep
splat due to the reference count being increased by the /proc access after
the reference-count check in fget_light() but before the check in
rcu_dereference_check_fdtable().

This commit prevents this false positive by checking for a single-threaded
process.  To avoid #include hell, this commit uses the wrapper for
thread_group_empty(current) defined by rcu_my_thread_group_empty()
provided in a separate commit.
Located-by: NMiles Lane <miles.lane@gmail.com>
Located-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

System will crash sooner or later once the memory with the code of the
s3c-sdhci.ko module is reused for something else. I really have no idea
how the lack of remove function went unnoticed into the mainline code.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

My Collabora address is no longer enabled - update the MODULE_AUTHOR
fields of drivers to my current email address.
Signed-off-by: NAndres Salomon <dilinger@queued.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Borislav Petkov reported his 32bit numa system has problem:

[    0.000000] Reserving total of 4c00 pages for numa KVA remap
[    0.000000] kva_start_pfn ~ 32800 max_low_pfn ~ 375fe
[    0.000000] max_pfn = 238000
[    0.000000] 8202MB HIGHMEM available.
[    0.000000] 885MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 375fe000
[    0.000000]   low ram: 0 - 375fe000
[    0.000000] alloc (nid=8 100000 - 7ee00000) (1000000 - ffffffff) 1000 1000 => 34e7000
[    0.000000] alloc (nid=8 100000 - 7ee00000) (1000000 - ffffffff) 200 40 => 34c9d80
[    0.000000] alloc (nid=0 100000 - 7ee00000) (1000000 - ffffffffffffffff) 180 40 => 34e6140
[    0.000000] alloc (nid=1 80000000 - c7e60000) (1000000 - ffffffffffffffff) 240 40 => 80000000
[    0.000000] BUG: unable to handle kernel paging request at 40000000
[    0.000000] IP: [<c2c8cff1>] __alloc_memory_core_early+0x147/0x1d6
[    0.000000] *pdpt = 0000000000000000 *pde = f000ff53f000ff00
...
[    0.000000] Call Trace:
[    0.000000]  [<c2c8b4f8>] ? __alloc_bootmem_node+0x216/0x22f
[    0.000000]  [<c2c90c9b>] ? sparse_early_usemaps_alloc_node+0x5a/0x10b
[    0.000000]  [<c2c9149e>] ? sparse_init+0x1dc/0x499
[    0.000000]  [<c2c79118>] ? paging_init+0x168/0x1df
[    0.000000]  [<c2c780ff>] ? native_pagetable_setup_start+0xef/0x1bb

looks like it allocates too much high address for bootmem.

Try to cut limit with get_max_mapped()
Reported-by: NBorislav Petkov <borislav.petkov@amd.com>
Tested-by: NConny Seidel <conny.seidel@amd.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: <stable@kernel.org>		[2.6.34.x]
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit e534c7c5 ("numa: x86_64: use generic percpu var
numa_node_id() implementation") broke numa systems that don't have ram
on node0 when MEMORY_HOTPLUG is enabled, because cpu_up() will call
cpu_to_node() before per_cpu(numa_node) is setup for APs.

When Node0 doesn't have RAM, on x86, cpus already round it to nearest
node with RAM in x86_cpu_to_node_map.  and per_cpu(numa_node) is not set
up until in c_init for APs.

When later cpu_up() calling cpu_to_node() will get 0 again, and make it
online even there is no RAM on node0.  so later all APs can not booted up,
and later will have panic.

[    1.611101] On node 0 totalpages: 0
.........
[    2.608558] On node 0 totalpages: 0
[    2.612065] Brought up 1 CPUs
[    2.615199] Total of 1 processors activated (3990.31 BogoMIPS).
...
   93.225341] calling  loop_init+0x0/0x1a4 @ 1
[   93.229314] PERCPU: allocation failed, size=80 align=8, failed to populate
[   93.246539] Pid: 1, comm: swapper Tainted: G        W   2.6.35-rc4-tip-yh-04371-gd64e6c4-dirty #354
[   93.264621] Call Trace:
[   93.266533]  [<ffffffff81125e43>] pcpu_alloc+0x83a/0x8e7
[   93.270710]  [<ffffffff81125f15>] __alloc_percpu+0x10/0x12
[   93.285849]  [<ffffffff8140786c>] alloc_disk_node+0x94/0x16d
[   93.291811]  [<ffffffff81407956>] alloc_disk+0x11/0x13
[   93.306157]  [<ffffffff81503e51>] loop_alloc+0xa7/0x180
[   93.310538]  [<ffffffff8277ef48>] loop_init+0x9b/0x1a4
[   93.324909]  [<ffffffff8277eead>] ? loop_init+0x0/0x1a4
[   93.329650]  [<ffffffff810001f2>] do_one_initcall+0x57/0x136
[   93.345197]  [<ffffffff827486d0>] kernel_init+0x184/0x20e
[   93.348146]  [<ffffffff81034954>] kernel_thread_helper+0x4/0x10
[   93.365194]  [<ffffffff81c7cc3c>] ? restore_args+0x0/0x30
[   93.369305]  [<ffffffff8274854c>] ? kernel_init+0x0/0x20e
[   93.386011]  [<ffffffff81034950>] ? kernel_thread_helper+0x0/0x10
[   93.392047] loop: out of memory
...

Try to assign per_cpu(numa_node) early

[akpm@linux-foundation.org: tidy up code comment]
Signed-off-by: NYinghai <yinghai@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Acked-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Simply add a proper ID into the device table.
Signed-off-by: NAnton Vorontsov <avorontsov@mvista.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Dave Jiang <djiang@mvista.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since commit 5753c082 ("powerpc/85xx:
Kconfig cleanup"), there is no MPC85xx Kconfig symbol anymore, so the
driver became non-selectable.

This patch fixes the issue by switching to PPC_85xx symbol.
Signed-off-by: NAnton Vorontsov <avorontsov@mvista.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Dave Jiang <djiang@mvista.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We need lock_page_nosync() here because we have no reference to the
mapping when taking the page lock.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Reviewed-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The last change to improve the scalability moved the actual wake-up out of
the section that is protected by spin_lock(sma->sem_perm.lock).

This means that IN_WAKEUP can be in queue.status even when the spinlock is
acquired by the current task.  Thus the same loop that is performed when
queue.status is read without the spinlock acquired must be performed when
the spinlock is acquired.

Thanks to kamezawa.hiroyu@jp.fujitsu.com for noticing lack of the memory
barrier.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16255

[akpm@linux-foundation.org: clean up kerneldoc, checkpatch warning and whitespace]
Signed-off-by: NManfred Spraul <manfred@colorfullife.com>
Reported-by: NLuca Tettamanti <kronos.it@gmail.com>
Tested-by: NLuca Tettamanti <kronos.it@gmail.com>
Reported-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Maciej Rutecki <maciej.rutecki@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

this fixes a regression since the fbcon rework.
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

On nv50 it became impossible to attempt a PCI ROM shadow of the VBIOS,
which will break some setups.

This patch also removes the different ordering of shadow methods for
pre-nv50 chipsets.  The reason for the different ordering was paranoia,
but it should hopefully be OK to try shadowing PRAMIN first.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This fixes a regression caused by b2ea4aa6
due to the way shared ddc with multiple digital connectors was handled.

You generally have two cases where DDC lines are shared:
- HDMI + VGA
- HDMI + DVI-D

HDMI + VGA is easy to deal with because you can check the EDID for the
to see if the attached monitor is digital.  A shared DDC line with two
digital connectors is more complex.  You can't use the hdmi bits in the
EDID since they may not be there with DVI<->HDMI adapters.  In this case
all we can do is check the HPD pins to see which is connected as we have
no way of knowing using the EDID.

Reported-by: trapdoor6@gmail.com
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Having both IO-mapping.txt and io-mapping.txt in Documentation/
was confusing and/or bothersome to some people, so rename
IO-mapping.txt to bus-virt-phys-mapping.txt.  Also update
Documentation/00-INDEX for both of these files.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Kees Bakker <kees.bakker@xs4all.nl>
Cc: Keith Packard <keithp@keithp.com>

* git://git.infradead.org/users/cbou/battery-2.6.35:
  ds2782_battery: Fix ds2782_get_capacity return value

The new netpoll code in bridging contains use-after-free bugs
that are non-trivial to fix.

This patch fixes this by removing the code that uses skbs after
they're freed.

As a consequence, this means that we can no longer call bridge
from the netpoll path, so this patch also removes the controller
function in order to disable netpoll.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Thanks,
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A lot of 945GMs have had stability issues for a long time, this manifested as X hangs, blitter engine hangs, and lots of crashes.

one such report is at:
https://bugs.freedesktop.org/show_bug.cgi?id=20560

along with numerous distro bugzillas.

This only took a week of digging and hair ripping to figure out.

Tracked down and tested on a 945GM Lenovo T60,
previously running
x11perf -copypixwin500
or
x11perf -copywinpix500
repeatedly would cause the GPU to wedge within 4 or 5 tries, with random busy bits set.

After this patch no hangs were observed.

cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

The i915 memory arbiter has a register full of configuration
bits which are currently not defined in the driver header file.
Signed-off-by: NKeith Packard <keithp@keithp.com>
cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

copy_to_user() returns the number of bytes remaining to be copied, but
we want to return a negative error code.  This gets copied to user
space.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

If the kzalloc() fails we should return NULL.  All the places that call
alloc_apertures() check for this already.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NJames Simmons <jsimmons@infradead.org>
Acked-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

If kzalloc() fails exit with -ENOMEM.
Signed-off-by: NKulikov Vasiliy <segooon@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Make inclusion of <asm/agp.h> conditional on TTM_HAS_AGP.  The use
of the functions declared in it is already conditional.
Reported-by: NGeert Stappers <stappers@stappers.nl>
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Tested-by: NGeert Stappers <stappers@stappers.nl>
Signed-off-by: NDave Airlie <airlied@redhat.com>