Bring back the functionality whereby an asymmetric key can be matched with a
partial match on one of its IDs.

Whilst we're at it, allow for the possibility of having an increased number of
IDs.
Reported-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Module signing matches keys by comparing against the key description exactly.
However, the way the key description gets constructed got changed to be
composed of the subject name plus the certificate serial number instead of the
subject name and the subjectKeyId.  I changed this to avoid problems with
certificates that don't *have* a subjectKeyId.

Instead, if available, use the raw subjectKeyId to form the key description
and only use the serial number if the subjectKeyId doesn't exist.
Reported-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>

If hexlen is odd then function returns an error.
Use IS_ERR to check for error, otherwise invalid pointer
is used and kernel gives oops:

[  132.816522] BUG: unable to handle kernel paging request at
ffffffffffffffea
[  132.819902] IP: [<ffffffff812bfc20>] asymmetric_key_id_same+0x14/0x36
[  132.820302] PGD 1a12067 PUD 1a14067 PMD 0
[  132.820302] Oops: 0000 [#1] SMP
[  132.820302] Modules linked in: bridge(E) stp(E) llc(E) evdev(E)
serio_raw(E) i2c_piix4(E) button(E) fuse(E)
[  132.820302] CPU: 0 PID: 2993 Comm: cat Tainted: G            E
3.16.0-kds+ #2847
[  132.820302] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[  132.820302] task: ffff88004249a430 ti: ffff880056640000 task.ti:
ffff880056640000
[  132.820302] RIP: 0010:[<ffffffff812bfc20>]  [<ffffffff812bfc20>]
asymmetric_key_id_same+0x14/0x36
[  132.820302] RSP: 0018:ffff880056643930  EFLAGS: 00010246
[  132.820302] RAX: 0000000000000000 RBX: ffffffffffffffea RCX:
ffff880056643ae0
[  132.820302] RDX: 000000000000005e RSI: ffffffffffffffea RDI:
ffff88005bac9300
[  132.820302] RBP: ffff880056643948 R08: 0000000000000003 R09:
00000007504aa01a
[  132.820302] R10: 0000000000000000 R11: 0000000000000000 R12:
ffff88005d68ca40
[  132.820302] R13: 0000000000000101 R14: 0000000000000000 R15:
ffff88005bac5280
[  132.820302] FS:  00007f67a153c740(0000) GS:ffff88005da00000(0000)
knlGS:0000000000000000
[  132.820302] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  132.820302] CR2: ffffffffffffffea CR3: 000000002e663000 CR4:
00000000000006f0
[  132.820302] Stack:
[  132.820302]  ffffffff812bfc66 ffff880056643ae0 ffff88005bac5280
ffff880056643958
[  132.820302]  ffffffff812bfc9d ffff880056643980 ffffffff812971d9
ffff88005ce930c1
[  132.820302]  ffff88005ce930c0 0000000000000000 ffff8800566439c8
ffffffff812fb753
[  132.820302] Call Trace:
[  132.820302]  [<ffffffff812bfc66>] ? asymmetric_match_key_ids+0x24/0x42
[  132.820302]  [<ffffffff812bfc9d>] asymmetric_key_cmp+0x19/0x1b
[  132.820302]  [<ffffffff812971d9>] keyring_search_iterator+0x74/0xd7
[  132.820302]  [<ffffffff812fb753>] assoc_array_subtree_iterate+0x67/0xd2
[  132.820302]  [<ffffffff81297165>] ? key_default_cmp+0x20/0x20
[  132.820302]  [<ffffffff812fbaa1>] assoc_array_iterate+0x19/0x1e
[  132.820302]  [<ffffffff81297332>] search_nested_keyrings+0xf6/0x2b6
[  132.820302]  [<ffffffff810728da>] ? sched_clock_cpu+0x91/0xa2
[  132.820302]  [<ffffffff810860d2>] ? mark_held_locks+0x58/0x6e
[  132.820302]  [<ffffffff810a137d>] ? current_kernel_time+0x77/0xb8
[  132.820302]  [<ffffffff81297871>] keyring_search_aux+0xe1/0x14c
[  132.820302]  [<ffffffff812977fc>] ? keyring_search_aux+0x6c/0x14c
[  132.820302]  [<ffffffff8129796b>] keyring_search+0x8f/0xb6
[  132.820302]  [<ffffffff812bfc84>] ? asymmetric_match_key_ids+0x42/0x42
[  132.820302]  [<ffffffff81297165>] ? key_default_cmp+0x20/0x20
[  132.820302]  [<ffffffff812ab9e3>] asymmetric_verify+0xa4/0x214
[  132.820302]  [<ffffffff812ab90e>] integrity_digsig_verify+0xb1/0xe2
[  132.820302]  [<ffffffff812abe41>] ? evm_verifyxattr+0x6a/0x7a
[  132.820302]  [<ffffffff812b0390>] ima_appraise_measurement+0x160/0x370
[  132.820302]  [<ffffffff81161db2>] ? d_absolute_path+0x5b/0x7a
[  132.820302]  [<ffffffff812ada30>] process_measurement+0x322/0x404
Reported-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity into next

Restructure to keyword=value pairs without spaces.  Drop superfluous words in
text.  Make invalid_context a keyword.  Change result= keyword to seresult=.
Signed-off-by: NRichard Guy Briggs <rgb@redhat.com>
[Minor rewrite to the patch subject line]
Signed-off-by: NPaul Moore <pmoore@redhat.com>

Convert audit_log() call to WARN_ONCE().

Rename "type=" to nlmsg_type=" to avoid confusion with the audit record
type.

Added "protocol=" to help track down which protocol (NETLINK_AUDIT?) was used
within the netlink protocol family.
Signed-off-by: NRichard Guy Briggs <rgb@redhat.com>
[Rewrote the patch subject line]
Signed-off-by: NPaul Moore <pmoore@redhat.com>

Merge tag 'keys-next-20140922' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs into next

As it stands, the code to generate an asymmetric key ID prechecks the hex
string it is given whilst determining the length, before it allocates the
buffer for hex2bin() to translate into - which mean that checking the result of
hex2bin() is redundant.

Unfortunately, hex2bin() is marked as __must_check, which means that the
following warning may be generated if the return value isn't checked:

	crypto/asymmetric_keys/asymmetric_type.c: In function
	asymmetric_key_hex_to_key_id:
	crypto/asymmetric_keys/asymmetric_type.c:110: warning: ignoring return
	value of hex2bin, declared with attribute warn_unused_result

The warning can't be avoided by casting the result to void.

Instead, use strlen() to check the length of the string and ignore the fact
that the string might not be entirely valid hex until after the allocation has
been done - in which case we can use the result of hex2bin() for this.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

This patch fixes the detection of the 'open_writers' violation for mmaped
files.

before) an 'open_writers' violation is detected if the policy contains
        a rule with the criteria: func=FILE_CHECK mask=MAY_READ

after) an 'open_writers' violation is detected if the current event
       matches one of the policy rules.

With the old behaviour, the 'open_writers' violation is not detected
in the following case:

policy:
measure func=FILE_MMAP mask=MAY_EXEC

steps:
1) open a shared library for writing
2) execute a binary that links that shared library
3) during the binary execution, modify the shared library and save
   the change

result:
the 'open_writers' violation measurement is not present in the IMA list.

Only binaries executed are protected from writes. For libraries mapped
in memory there is the flag MAP_DENYWRITE for this purpose, but according
to the output of 'man mmap', the mmap flag is ignored.

Since ima_rdwr_violation_check() is now called by process_measurement()
the information about if the inode must be measured is already provided
by ima_get_action(). Thus the unnecessary function ima_must_measure()
has been removed.

Changes in v3 (Dmitry Kasatkin):
- Violation for MMAP_CHECK function are verified since this patch
- Changed patch description a bit
Signed-off-by: NRoberto Sassu <roberto.sassu@polito.it>
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

This patch fixes a race condition between two functions that try to access
the same inode. Since the i_mutex lock is held and released separately
in the two functions, there may be the possibility that a violation is
not correctly detected.

Suppose there are two processes, A (reader) and B (writer), if the
following sequence happens:

A: ima_rdwr_violation_check()
B: ima_rdwr_violation_check()
B: process_measurement()
B: starts writing the inode
A: process_measurement()

the ToMToU violation (a reader may be accessing a content different from
that measured, due to a concurrent modification by a writer) will not be
detected. To avoid this issue, the violation check and the measurement
must be done atomically.

This patch fixes the problem by moving the violation check inside
process_measurement() when the i_mutex lock is held. Differently from
the old code, the violation check is executed also for the MMAP_CHECK
hook (other than for FILE_CHECK). This allows to detect ToMToU violations
that are possible because shared libraries can be opened for writing
while they are in use (according to the output of 'man mmap', the mmap()
flag MAP_DENYWRITE is ignored).

Changes in v5 (Roberto Sassu):
* get iint if action is not zero
* exit process_measurement() after the violation check if action is zero
* reverse order process_measurement() exit cleanup (Mimi)

Changes in v4 (Dmitry Kasatkin):
* iint allocation is done before calling ima_rdrw_violation_check()
  (Suggested-by Mimi)
* do not check for violations if the policy does not contain 'measure'
  rules (done by Roberto Sassu)

Changes in v3 (Dmitry Kasatkin):
* no violation checking for MMAP_CHECK function in this patch
* remove use of filename from violation
* removes checking if ima is enabled from ima_rdrw_violation_check
* slight style change
Suggested-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NRoberto Sassu <roberto.sassu@polito.it>
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

This patch introduces the new variable 'ima_policy_flag', whose bits
are set depending on the action of the current policy rules. Only the
flags IMA_MEASURE, IMA_APPRAISE and IMA_AUDIT are set.

The new variable will be used to improve performance by skipping the
unnecessary execution of IMA code if the policy does not contain rules
with the above actions.

Changes in v6 (Roberto Sassu)
* do not check 'ima_initialized' before calling ima_update_policy_flag()
  in ima_update_policy() (suggested by Dmitry)
* calling ima_update_policy_flag() moved to init_ima to co-locate with
  ima_initialized (Dmitry)
* add/revise comments (Mimi)

Changes in v5 (Roberto Sassu)
* reset IMA_APPRAISE flag in 'ima_policy_flag' if 'ima_appraise' is set
  to zero (reported by Dmitry)
* update 'ima_policy_flag' only if IMA initialization is successful
  (suggested by Mimi and Dmitry)
* check 'ima_policy_flag' instead of 'ima_initialized'
  (suggested by Mimi and Dmitry)
Signed-off-by: NRoberto Sassu <roberto.sassu@polito.it>
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

This patch modifies ima_add_boot_aggregate() to return an error code.
This way we can determine if all the initialization procedures have
been executed successfully.
Signed-off-by: NRoberto Sassu <roberto.sassu@polito.it>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

The kernel boot parameter "ima_appraise" currently defines 'off',
'enforce' and 'fix' modes.  When designing a policy and labeling
the system, access to files are either blocked in the default
'enforce' mode or automatically fixed in the 'fix' mode.  It is
beneficial to be able to run the system in a logging only mode,
without fixing it, in order to properly analyze the system. This
patch adds a 'log' mode to run the system in a permissive mode and
log the appraisal results.
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

ima_init() is used as a single place for all initializations.
Experimental keyring patches used the 'late_initcall' which was
co-located with the late_initcall(init_ima). When the late_initcall
for the keyring initialization was abandoned, initialization moved
to init_ima, though it would be more logical to move it to ima_init,
where the rest of the initialization is done. This patch moves the
keyring initialization to ima_init() as a preparatory step for
loading the keys which will be added to ima_init() in following
patches.
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Changes for next to improve the matching of asymmetric keys and to improve the
handling of PKCS#7 certificates:

 (1) Provide a method to preparse the data supplied for matching a key.  This
     permits they key type to extract out the bits it needs for matching once
     only.

     Further, the type of search (direct lookup or iterative) can be set and
     the function used to actually check the match can be set by preparse
     rather than being hard coded for the type.

 (2) Improves asymmetric keys identification.

     Keys derived from X.509 certs now get labelled with IDs derived from their
     issuer and certificate number (required to match PKCS#7) and from their
     SKID and subject (required to match X.509).

     IDs are now binary and match criterion preparsing is provided so that
     criteria can be turned into binary blobs to make matching faster.

 (3) Improves PKCS#7 message handling to permit PKCS#7 messages without X.509
     cert lists to be matched to trusted keys, thereby allowing minimally sized
     PKCS#7 certs to be used.

 (4) Improves PKCS#7 message handling to better handle certificate chains that
     are broken due to unsupported crypto that can otherwise by used to
     intersect a trust keyring.

These must go on top of the PKCS#7 parser cleanup fixes.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

The X.509 certificate list in a PKCS#7 message is optional.  To save space, we
can omit the inclusion of any X.509 certificates if we are sure that we can
look the relevant public key up by the serial number and issuer given in a
signed info block.

This also supports use of a signed info block for which we can't find a
matching X.509 cert in the certificate list, though it be populated.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>

Provide better handling of unsupported crypto when verifying a PKCS#7 message.
If we can't bridge the gap between a pair of X.509 certs or between a signed
info block and an X.509 cert because it involves some crypto we don't support,
that's not necessarily the end of the world as there may be other ways points
at which we can intersect with a ring of trusted keys.

Instead, only produce ENOPKG immediately if all the signed info blocks in a
PKCS#7 message require unsupported crypto to bridge to the first X.509 cert.
Otherwise, we defer the generation of ENOPKG until we get ENOKEY during trust
validation.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>

Make use of the new match string preparsing to overhaul key identification
when searching for asymmetric keys.  The following changes are made:

 (1) Use the previously created asymmetric_key_id struct to hold the following
     key IDs derived from the X.509 certificate or PKCS#7 message:

	id: serial number + issuer
	skid: subjKeyId + subject
	authority: authKeyId + issuer

 (2) Replace the hex fingerprint attached to key->type_data[1] with an
     asymmetric_key_ids struct containing the id and the skid (if present).

 (3) Make the asymmetric_type match data preparse select one of two searches:

     (a) An iterative search for the key ID given if prefixed with "id:".  The
     	 prefix is expected to be followed by a hex string giving the ID to
     	 search for.  The criterion key ID is checked against all key IDs
     	 recorded on the key.

     (b) A direct search if the key ID is not prefixed with "id:".  This will
     	 look for an exact match on the key description.

 (4) Make x509_request_asymmetric_key() take a key ID.  This is then converted
     into "id:<hex>" and passed into keyring_search() where match preparsing
     will turn it back into a binary ID.

 (5) X.509 certificate verification then takes the authority key ID and looks
     up a key that matches it to find the public key for the certificate
     signature.

 (6) PKCS#7 certificate verification then takes the id key ID and looks up a
     key that matches it to find the public key for the signed information
     block signature.

Additional changes:

 (1) Multiple subjKeyId and authKeyId values on an X.509 certificate cause the
     cert to be rejected with -EBADMSG.

 (2) The 'fingerprint' ID is gone.  This was primarily intended to convey PGP
     public key fingerprints.  If PGP is supported in future, this should
     generate a key ID that carries the fingerprint.

 (3) Th ca_keyid= kernel command line option is now converted to a key ID and
     used to match the authority key ID.  Possibly this should only match the
     actual authKeyId part and not the issuer as well.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>

Implement the first step in using binary key IDs for asymmetric keys rather
than hex string keys.

The previously added match data preparsing will be able to convert hex
criterion strings into binary which can then be compared more rapidly.

Further, we actually want more then one ID string per public key.  The problem
is that X.509 certs refer to other X.509 certs by matching Issuer + AuthKeyId
to Subject + SubjKeyId, but PKCS#7 messages match against X.509 Issuer +
SerialNumber.

This patch just provides facilities for a later patch to make use of.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>

Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>

Make the key matching functions pointed to by key_match_data::cmp return bool
rather than int.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>

A previous patch added a ->match_preparse() method to the key type.  This is
allowed to override the function called by the iteration algorithm.
Therefore, we can just set a default that simply checks for an exact match of
the key description with the original criterion data and allow match_preparse
to override it as needed.

The key_type::match op is then redundant and can be removed, as can the
user_match() function.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>

Remove key_type::def_lookup_type as it's no longer used.  The information now
defaults to KEYRING_SEARCH_LOOKUP_DIRECT but may be overridden by
type->match_preparse().
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>

Preparse the match data.  This provides several advantages:

 (1) The preparser can reject invalid criteria up front.

 (2) The preparser can convert the criteria to binary data if necessary (the
     asymmetric key type really wants to do binary comparison of the key IDs).

 (3) The preparser can set the type of search to be performed.  This means
     that it's not then a one-off setting in the key type.

 (4) The preparser can set an appropriate comparator function.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>

Provide a function to convert a buffer of binary data into an unterminated
ascii hex string representation of that data.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>

Merge in keyrings fixes for next:

 (1) Insert some missing 'static' annotations.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Merge in keyrings fixes, at least some of which later patches depend on:

 (1) Reinstate the production of EPERM for key types beginning with '.' in
     requests from userspace.

 (2) Tidy up the cleanup of PKCS#7 message signed information blocks and fix a
     bug this made more obvious.
Signed-off-by: NDavid Howells <dhowells@redhat.coM>

Fix the parser cleanup code to drain parsed out X.509 certs in the case that
the decode fails and we jump to error_decode.

The function is rearranged so that the same cleanup code is used in the success
case as the error case - just that the message descriptor under construction is
only released if it is still pointed to by the context struct at that point.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>

The code to free a signed info block is repeated several times, so move the
code to do it into a function of its own.  This gives us a place to add clean
ups for stuff that gets added to pkcs7_signed_info.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>

Reinstate the generation of EPERM for a key type name beginning with a '.' in
a userspace call.  Types whose name begins with a '.' are internal only.

The test was removed by:

	commit a4e3b8d7
	Author: Mimi Zohar <zohar@linux.vnet.ibm.com>
	Date:   Thu May 22 14:02:23 2014 -0400
	Subject: KEYS: special dot prefixed keyring name bug fix

I think we want to keep the restriction on type name so that userspace can't
add keys of a special internal type.

Note that removal of the test causes several of the tests in the keyutils
testsuite to fail.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
cc: Mimi Zohar <zohar@linux.vnet.ibm.com>

Add a missing static (found by checker).
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>

Fix missing statics (found by checker).
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NVivek Goyal <vgoyal@redhat.com>

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity into next

While SELinux largely ignores namespaces, for good reason, there are
some places where it needs to at least be aware of namespaces in order
to function correctly.  Network namespaces are one example.  Basic
awareness of network namespaces are necessary in order to match a
network interface's index number to an actual network device.

This patch corrects a problem with network interfaces added to a
non-init namespace, and can be reproduced with the following commands:

 [NOTE: the NetLabel configuration is here only to active the dynamic
        networking controls ]

 # netlabelctl unlbl add default address:0.0.0.0/0 \
   label:system_u:object_r:unlabeled_t:s0
 # netlabelctl unlbl add default address:::/0 \
   label:system_u:object_r:unlabeled_t:s0
 # netlabelctl cipsov4 add pass doi:100 tags:1
 # netlabelctl map add domain:lspp_test_netlabel_t \
   protocol:cipsov4,100

 # ip link add type veth
 # ip netns add myns
 # ip link set veth1 netns myns
 # ip a add dev veth0 10.250.13.100/24
 # ip netns exec myns ip a add dev veth1 10.250.13.101/24
 # ip l set veth0 up
 # ip netns exec myns ip l set veth1 up

 # ping -c 1 10.250.13.101
 # ip netns exec myns ping -c 1 10.250.13.100
Reported-by: NJiri Jaburek <jjaburek@redhat.com>
Signed-off-by: NPaul Moore <pmoore@redhat.com>

The kernel print macros use the KBUILD_MODNAME, which is initialized
to the module name. The current integrity/Makefile makes every file
as its own module, so pr_xxx messages are prefixed with the file name
instead of the module.  Similar to the evm/Makefile and ima/Makefile,
this patch fixes the integrity/Makefile to use the single name
'integrity'.
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

The integrity subsystem has lots of options and takes more than
half of the security menu.  This patch consolidates the options
under "integrity", which are hidden if not enabled.  This change
does not affect existing configurations.  Re-configuration is not
needed.

Changes v4:
- no need to change "integrity subsystem" to menuconfig as
options are hidden, when not enabled. (Mimi)
- add INTEGRITY Kconfig help description

Changes v3:
- dependency to INTEGRITY removed when behind 'if INTEGRITY'

Changes v2:
- previous patch moved integrity out of the 'security' menu.
  This version keeps integrity as a security option (Mimi).
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

For better visual appearance it is better to co-locate
asymmetric key options together with signature support.
Signed-off-by: NDmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>