If mds does not, return -EOPNOTSUPP.

Link: http://tracker.ceph.com/issues/23491Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

This patch adds the infrastructure required to support cephfs quotas as it
is currently implemented in the ceph fuse client.  Cephfs quotas can be
set on any directory, and can restrict the number of bytes or the number
of files stored beneath that point in the directory hierarchy.

Quotas are set using the extended attributes 'ceph.quota.max_files' and
'ceph.quota.max_bytes', and can be removed by setting these attributes to
'0'.

Link: http://tracker.ceph.com/issues/22372Signed-off-by: NLuis Henriques <lhenriques@suse.com>
Reviewed-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The script “checkpatch.pl” pointed information out like the following.

Comparison to NULL could be written ...

Thus fix the affected source code places.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Reviewed-by: NYan, Zheng <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Previously we were returning values for quota, layout
xattrs without any kind of update -- the user just got
whatever happened to be in our cache.

Clearly this extra round trip has a cost, but reads of
these xattrs are fairly rare, happening on admin
intervention rather than in normal operation.

Link: http://tracker.ceph.com/issues/17939Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

The ceph_inode_xattr needs to be released when removing an xattr.  Easily
reproducible running the 'generic/020' test from xfstests or simply by
doing:

  attr -s attr0 -V 0 /mnt/test && attr -r attr0 /mnt/test

While there, also fix the error path.

Here's the kmemleak splat:

unreferenced object 0xffff88001f86fbc0 (size 64):
  comm "attr", pid 244, jiffies 4294904246 (age 98.464s)
  hex dump (first 32 bytes):
    40 fa 86 1f 00 88 ff ff 80 32 38 1f 00 88 ff ff  @........28.....
    00 01 00 00 00 00 ad de 00 02 00 00 00 00 ad de  ................
  backtrace:
    [<ffffffff81560199>] kmemleak_alloc+0x49/0xa0
    [<ffffffff810f3e5b>] kmem_cache_alloc+0x9b/0xf0
    [<ffffffff812b157e>] __ceph_setxattr+0x17e/0x820
    [<ffffffff812b1c57>] ceph_set_xattr_handler+0x37/0x40
    [<ffffffff8111fb4b>] __vfs_removexattr+0x4b/0x60
    [<ffffffff8111fd37>] vfs_removexattr+0x77/0xd0
    [<ffffffff8111fdd1>] removexattr+0x41/0x60
    [<ffffffff8111fe65>] path_removexattr+0x75/0xa0
    [<ffffffff81120aeb>] SyS_lremovexattr+0xb/0x10
    [<ffffffff81564b20>] entry_SYSCALL_64_fastpath+0x13/0x94
    [<ffffffffffffffff>] 0xffffffffffffffff

Cc: stable@vger.kernel.org
Signed-off-by: NLuis Henriques <lhenriques@suse.com>
Reviewed-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Fixes the following sparse warning:

fs/ceph/xattr.c:19:28: warning:
 symbol 'ceph_other_xattr_handler' was not declared. Should it be static?
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

current_fs_time() uses struct super_block* as an argument.
As per Linus's suggestion, this is changed to take struct
inode* as a parameter instead. This is because the function
is primarily meant for vfs inode timestamps.
Also the function was renamed as per Arnd's suggestion.

Change all calls to current_fs_time() to use the new
current_time() function instead. current_fs_time() will be
deleted.
Signed-off-by: NDeepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This patch adds codes that decode pool namespace information in
cap message and request reply. Pool namespace is saved in i_layout,
it will be passed to libceph when doing read/write.
Signed-off-by: NYan, Zheng <zyan@redhat.com>

Define new ceph_file_layout structure and rename old ceph_file_layout
to ceph_file_layout_legacy. This is preparation for adding namespace
to ceph_file_layout structure.
Signed-off-by: NYan, Zheng <zyan@redhat.com>

preparation for similar switch in ->setxattr() (see the next commit for
rationale).
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Setxattr with NULL value and XATTR_REPLACE flag should be equivalent
to removexattr. But current MDS does not support deleting vxattrs through
MDS_OP_SETXATTR request. The workaround is sending MDS_OP_RMXATTR request
if setxattr actually removs xattr.
Signed-off-by: NYan, Zheng <zyan@redhat.com>

This is a major sync up, up to ~Jewel.  The highlights are:

- per-session request trees (vs a global per-client tree)
- per-session locking (vs a global per-client rwlock)
- homeless OSD session
- no ad-hoc global per-client lists
- support for pool quotas
- foundation for watch/notify v2 support
- foundation for map check (pool deletion detection) support

The switchover is incomplete: lingering requests can be setup and
teared down but aren't ever reestablished.  This functionality is
restored with the introduction of the new lingering infrastructure
(ceph_osd_linger_request, linger_work, etc) in a later commit.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

when removing a xattr, generic_removexattr() calls __ceph_setxattr()
with NULL value and XATTR_REPLACE flag. __ceph_removexattr() is not
used any more.
Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add a catch-all xattr handler at the end of ceph_xattr_handlers.  Check
for valid attribute names there, and remove those checks from
__ceph_{get,set,remove}xattr instead.  No "system.*" xattrs need to be
handled by the catch-all handler anymore.

The set xattr handler is called with a NULL value to indicate that the
attribute should be removed; __ceph_setxattr already handles that case
correctly (ceph_set_acl could already calling __ceph_setxattr with a NULL
value).

Move the check for snapshots from ceph_{set,remove}xattr into
__ceph_{set,remove}xattr.  With that, ceph_{get,set,remove}xattr can be
replaced with the generic iops.
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Create a variant of ceph_setattr that takes an inode instead of a
dentry.  Change __ceph_setxattr (and also __ceph_removexattr) to take an
inode instead of a dentry.  Use those in ceph_set_acl so that we no
longer need a dentry there.
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: N"Yan, Zheng" <zyan@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

When security is enabled, security module can call filesystem's
getxattr/setxattr callbacks during d_instantiate(). For cephfs,
d_instantiate() is usually called by MDS' dispatch thread, while
handling MDS reply. If the MDS reply does not include xattrs and
corresponding caps, getxattr/setxattr need to send a new request
to MDS and waits for the reply. This makes MDS' dispatch sleep,
nobody handles later MDS replies.

The fix is make sure lookup/atomic_open reply include xattrs and
corresponding caps. So getxattr can be handled by cached xattrs.
This requires some modification to both MDS and request message.
(Client tells MDS what caps it wants; MDS encodes proper caps in
the reply)

Smack security module may call setxattr during d_instantiate().
Unlike getxattr, we can't force MDS to issue CEPH_CAP_XATTR_EXCL
to us. So just make setxattr return error when called by MDS'
dispatch thread.
Signed-off-by: NYan, Zheng <zyan@redhat.com>

It's uselese because MDS reply does not carry any vxattr.
Signed-off-by: NYan, Zheng <zyan@redhat.com>

CURRENT_TIME macro is not appropriate for filesystems as it
doesn't use the right granularity for filesystem timestamps.
Use current_fs_time() instead.
Signed-off-by: NDeepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: NYan, Zheng <zyan@redhat.com>

Signed-off-by: NYan, Zheng <zyan@redhat.com>

When ceph inode's i_head_snapc is NULL, __ceph_mark_dirty_caps()
accesses snap realm's cached_context. So we need take read lock
of snap_rwsem.
Signed-off-by: NYan, Zheng <zyan@redhat.com>

Currently, there is no check for the kstrdup() for r_path2,
r_path1 and snapdir_name as various locations as there is a
possibility of failure during memory pressure. Therefore,
returning ENOMEM where the checks have been missed.
Signed-off-by: NSanidhya Kashyap <sanidhya.gatech@gmail.com>
Signed-off-by: NYan, Zheng <zyan@redhat.com>

that's the bulk of filesystem drivers dealing with inodes of their own
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

make sure 'value' is not null. otherwise __ceph_setxattr will remove
the extended attribute.
Signed-off-by: NYan, Zheng <zyan@redhat.com>
Reviewed-by: NSage Weil <sage@redhat.com>

Current code uses page array to present MDS request data. Pages in the
array are allocated/freed by caller of ceph_mdsc_do_request(). If request
is interrupted, the pages can be freed while they are still being used by
the request message.

The fix is use pagelist to present MDS request data. Pagelist is
reference counted.
Signed-off-by: NYan, Zheng <zyan@redhat.com>
Reviewed-by: NSage Weil <sage@redhat.com>

only regular file and directory have vxattrs.
Signed-off-by: NYan, Zheng <zyan@redhat.com>

Following sequence of events can happen.
  - Client releases an inode, queues cap release message.
  - A 'lookup' reply brings the same inode back, but the reply
    doesn't contain xattrs because MDS didn't receive the cap release
    message and thought client already has up-to-data xattrs.

The fix is force sending a getattr request to MDS if xattrs_version
is 0. The getattr mask is set to CEPH_STAT_CAP_XATTR, so MDS knows client
does not have xattr.
Signed-off-by: NYan, Zheng <zyan@redhat.com>

struct ceph_xattr -> struct ceph_inode_xattr
Reported-by: NToralf Förster <toralf.foerster@gmx.de>
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

xattrs array of pointers is allocated with kcalloc() - no need to
memset() it to 0 right after that.
Signed-off-by: NIlya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: NAlex Elder <elder@linaro.org>

This avoids 'cp -a' modifying layout of new files/directories.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>

If buffer size is zero, return the size of layout vxattr. If buffer
size is not zero, check if it is large enough for layout vxattr.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>

The fsync(dirfd) only covers namespace operations, not inode updates.
We do not need to cover setattr variants or O_TRUNC.
Reported-by: NAl Viro <viro@xeniv.linux.org.uk>
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NYan, Zheng <zheng.z.yan@intel.com>

Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>

For the setxattr request, introduce a new flag CEPH_XATTR_REMOVE
to distinguish null value case from the zero-length value case.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>

return -EEXIST if XATTR_CREATE is set and xattr alread exists.
return -ENODATA if XATTR_REPLACE is set but xattr does not exist.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>

The previous ceph-client merge resulted in ceph not even building,
because there was a merge conflict that wasn't visible as an actual data
conflict: commit 7221fe4c ("ceph: add acl for cephfs") added support
for POSIX ACL's into Ceph, but unluckily we also had the VFS tree change
a lot of the POSIX ACL helper functions to be much more helpful to
filesystems (see for example commits 2aeccbe9 "fs: add generic
xattr_acl handlers", 5bf3258f "fs: make posix_acl_chmod more useful"
and 37bc1539 "fs: make posix_acl_create more useful")

The reason this conflict wasn't obvious was many-fold: because it was a
semantic conflict rather than a data conflict, it wasn't visible in the
git merge as a conflict.  And because the VFS tree hadn't been in
linux-next, people hadn't become aware of it that way.  And because I
was at jury duty this morning, I was using my laptop and as a result not
doing constant "allmodconfig" builds.

Anyway, this fixes the build and generally removes a fair chunk of the
Ceph POSIX ACL support code, since the improved helpers seem to match
really well for Ceph too.  But I don't actually have any way to *test*
the end result, and I was really hoping for some ACK's for this.  Oh,
well.

Not compiling certainly doesn't make things easier to test, so I'm
committing this without the acks after having waited for four hours...
Plus it's what I would have done for the merge had I noticed the
semantic conflict..
Reported-by: NDave Jones <davej@redhat.com>
Cc: Sage Weil <sage@inktank.com>
Cc: Guangliang Zhao <lucienchao@gmail.com>
Cc: Li Wang <li.wang@ubuntykylin.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NGuangliang Zhao <lucienchao@gmail.com>
Reviewed-by: NLi Wang <li.wang@ubuntykylin.com>
Reviewed-by: NZheng Yan <zheng.z.yan@intel.com>

[ 1121.231883] BUG: sleeping function called from invalid context at kernel/rwsem.c:20
[ 1121.231935] in_atomic(): 1, irqs_disabled(): 0, pid: 9831, name: mv
[ 1121.231971] 1 lock held by mv/9831:
[ 1121.231973]  #0:  (&(&ci->i_ceph_lock)->rlock){+.+...},at:[<ffffffffa02bbd38>] ceph_getxattr+0x58/0x1d0 [ceph]
[ 1121.231998] CPU: 3 PID: 9831 Comm: mv Not tainted 3.10.0-rc6+ #215
[ 1121.232000] Hardware name: To Be Filled By O.E.M. To Be Filled By
O.E.M./To be filled by O.E.M., BIOS 080015  11/09/2011
[ 1121.232027]  ffff88006d355a80 ffff880092f69ce0 ffffffff8168348c ffff880092f69cf8
[ 1121.232045]  ffffffff81070435 ffff88006d355a20 ffff880092f69d20 ffffffff816899ba
[ 1121.232052]  0000000300000004 ffff8800b76911d0 ffff88006d355a20 ffff880092f69d68
[ 1121.232056] Call Trace:
[ 1121.232062]  [<ffffffff8168348c>] dump_stack+0x19/0x1b
[ 1121.232067]  [<ffffffff81070435>] __might_sleep+0xe5/0x110
[ 1121.232071]  [<ffffffff816899ba>] down_read+0x2a/0x98
[ 1121.232080]  [<ffffffffa02baf70>] ceph_vxattrcb_layout+0x60/0xf0 [ceph]
[ 1121.232088]  [<ffffffffa02bbd7f>] ceph_getxattr+0x9f/0x1d0 [ceph]
[ 1121.232093]  [<ffffffff81188d28>] vfs_getxattr+0xa8/0xd0
[ 1121.232097]  [<ffffffff8118900b>] getxattr+0xab/0x1c0
[ 1121.232100]  [<ffffffff811704f2>] ? final_putname+0x22/0x50
[ 1121.232104]  [<ffffffff81155f80>] ? kmem_cache_free+0xb0/0x260
[ 1121.232107]  [<ffffffff811704f2>] ? final_putname+0x22/0x50
[ 1121.232110]  [<ffffffff8109e63d>] ? trace_hardirqs_on+0xd/0x10
[ 1121.232114]  [<ffffffff816957a7>] ? sysret_check+0x1b/0x56
[ 1121.232120]  [<ffffffff81189c9c>] SyS_fgetxattr+0x6c/0xc0
[ 1121.232125]  [<ffffffff81695782>] system_call_fastpath+0x16/0x1b
[ 1121.232129] BUG: scheduling while atomic: mv/9831/0x10000002
[ 1121.232154] 1 lock held by mv/9831:
[ 1121.232156]  #0:  (&(&ci->i_ceph_lock)->rlock){+.+...}, at:
[<ffffffffa02bbd38>] ceph_getxattr+0x58/0x1d0 [ceph]

I think move the ci->i_ceph_lock down is safe because we can't free
ceph_inode_info at there.

CC: stable@vger.kernel.org  # 3.8+
Signed-off-by: NJianpeng Ma <majianpeng@gmail.com>
Reviewed-by: NSage Weil <sage@inktank.com>

Fix the causes for sparse warnings reported in the ceph file system
code.  Here there are only two (and they're sort of silly but
they're easy to fix).

This partially resolves:
    http://tracker.ceph.com/issues/4184Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>