- 24 11月, 2016 2 次提交
-
-
由 Filipe Manana 提交于
We can not simply use the owner field from an extent buffer's header to get the id of the respective tree when the extent buffer is from a relocation tree. When we create the root for a relocation tree we leave (on purpose) the owner field with the same value as the subvolume's tree root (we do this at ctree.c:btrfs_copy_root()). So we must ignore extent buffers from relocation trees, which have the BTRFS_HEADER_FLAG_RELOC flag set, because otherwise we will always consider the extent buffer as not being the root of the tree (the root of original subvolume tree is always different from the root of the respective relocation tree). This lead to assertion failures when running with the integrity checker enabled (CONFIG_BTRFS_FS_CHECK_INTEGRITY=y) such as the following: [ 643.393409] BTRFS critical (device sdg): corrupt leaf, non-root leaf's nritems is 0: block=38506496, root=260, slot=0 [ 643.397609] BTRFS info (device sdg): leaf 38506496 total ptrs 0 free space 3995 [ 643.407075] assertion failed: 0, file: fs/btrfs/disk-io.c, line: 4078 [ 643.408425] ------------[ cut here ]------------ [ 643.409112] kernel BUG at fs/btrfs/ctree.h:3419! [ 643.409773] invalid opcode: 0000 [#1] PREEMPT SMP [ 643.410447] Modules linked in: dm_flakey dm_mod crc32c_generic btrfs xor raid6_pq ppdev psmouse acpi_cpufreq parport_pc evdev parport tpm_tis tpm_tis_core pcspkr serio_raw i2c_piix4 sg tpm i2c_core button processor loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring scsi_mod virtio e1000 floppy [ 643.414356] CPU: 11 PID: 32726 Comm: btrfs Not tainted 4.8.0-rc8-btrfs-next-35+ #1 [ 643.414356] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014 [ 643.414356] task: ffff880145e95b00 task.stack: ffff88014826c000 [ 643.414356] RIP: 0010:[<ffffffffa0352759>] [<ffffffffa0352759>] assfail.constprop.41+0x1c/0x1e [btrfs] [ 643.414356] RSP: 0018:ffff88014826fa28 EFLAGS: 00010292 [ 643.414356] RAX: 0000000000000039 RBX: ffff88014e2d7c38 RCX: 0000000000000001 [ 643.414356] RDX: ffff88023f4d2f58 RSI: ffffffff81806c63 RDI: 00000000ffffffff [ 643.414356] RBP: ffff88014826fa28 R08: 0000000000000001 R09: 0000000000000000 [ 643.414356] R10: ffff88014826f918 R11: ffffffff82f3c5ed R12: ffff880172910000 [ 643.414356] R13: ffff880233992230 R14: ffff8801a68a3310 R15: fffffffffffffff8 [ 643.414356] FS: 00007f9ca305e8c0(0000) GS:ffff88023f4c0000(0000) knlGS:0000000000000000 [ 643.414356] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 643.414356] CR2: 00007f9ca3071000 CR3: 000000015d01b000 CR4: 00000000000006e0 [ 643.414356] Stack: [ 643.414356] ffff88014826fa50 ffffffffa02d655a 000000000000000a ffff88014e2d7c38 [ 643.414356] 0000000000000000 ffff88014826faa8 ffffffffa02b72f3 ffff88014826fab8 [ 643.414356] 00ffffffa03228e4 0000000000000000 0000000000000000 ffff8801bbd4e000 [ 643.414356] Call Trace: [ 643.414356] [<ffffffffa02d655a>] btrfs_mark_buffer_dirty+0xdf/0xe5 [btrfs] [ 643.414356] [<ffffffffa02b72f3>] btrfs_copy_root+0x18a/0x1d1 [btrfs] [ 643.414356] [<ffffffffa0322921>] create_reloc_root+0x72/0x1ba [btrfs] [ 643.414356] [<ffffffffa03267c2>] btrfs_init_reloc_root+0x7b/0xa7 [btrfs] [ 643.414356] [<ffffffffa02d9e44>] record_root_in_trans+0xdf/0xed [btrfs] [ 643.414356] [<ffffffffa02db04e>] btrfs_record_root_in_trans+0x50/0x6a [btrfs] [ 643.414356] [<ffffffffa030ad2b>] create_subvol+0x472/0x773 [btrfs] [ 643.414356] [<ffffffffa030b406>] btrfs_mksubvol+0x3da/0x463 [btrfs] [ 643.414356] [<ffffffffa030b406>] ? btrfs_mksubvol+0x3da/0x463 [btrfs] [ 643.414356] [<ffffffff810781ac>] ? preempt_count_add+0x65/0x68 [ 643.414356] [<ffffffff811a6e97>] ? __mnt_want_write+0x62/0x77 [ 643.414356] [<ffffffffa030b55d>] btrfs_ioctl_snap_create_transid+0xce/0x187 [btrfs] [ 643.414356] [<ffffffffa030b67d>] btrfs_ioctl_snap_create+0x67/0x81 [btrfs] [ 643.414356] [<ffffffffa030ecfd>] btrfs_ioctl+0x508/0x20dd [btrfs] [ 643.414356] [<ffffffff81293e39>] ? __this_cpu_preempt_check+0x13/0x15 [ 643.414356] [<ffffffff81155eca>] ? handle_mm_fault+0x976/0x9ab [ 643.414356] [<ffffffff81091300>] ? arch_local_irq_save+0x9/0xc [ 643.414356] [<ffffffff8119a2b0>] vfs_ioctl+0x18/0x34 [ 643.414356] [<ffffffff8119a8e8>] do_vfs_ioctl+0x581/0x600 [ 643.414356] [<ffffffff814b9552>] ? entry_SYSCALL_64_fastpath+0x5/0xa8 [ 643.414356] [<ffffffff81093fe9>] ? trace_hardirqs_on_caller+0x17b/0x197 [ 643.414356] [<ffffffff8119a9be>] SyS_ioctl+0x57/0x79 [ 643.414356] [<ffffffff814b9565>] entry_SYSCALL_64_fastpath+0x18/0xa8 [ 643.414356] [<ffffffff81091b08>] ? trace_hardirqs_off_caller+0x3f/0xaa [ 643.414356] Code: 89 83 88 00 00 00 31 c0 5b 41 5c 41 5d 5d c3 55 89 f1 48 c7 c2 98 bc 35 a0 48 89 fe 48 c7 c7 05 be 35 a0 48 89 e5 e8 13 46 dd e0 <0f> 0b 55 89 f1 48 c7 c2 9f d3 35 a0 48 89 fe 48 c7 c7 7a d5 35 [ 643.414356] RIP [<ffffffffa0352759>] assfail.constprop.41+0x1c/0x1e [btrfs] [ 643.414356] RSP <ffff88014826fa28> [ 643.468267] ---[ end trace 6a1b3fb1a9d7d6e3 ]--- This can be easily reproduced by running xfstests with the integrity checker enabled. Fixes: 1ba98d08 (Btrfs: detect corruption when non-root leaf has zero item) Cc: stable@vger.kernel.org # 4.8+ Signed-off-by: NFilipe Manana <fdmanana@suse.com> Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
-
由 Liu Bo 提交于
This can only happen with CONFIG_BTRFS_FS_CHECK_INTEGRITY=y. Commit 1ba98d08 ("Btrfs: detect corruption when non-root leaf has zero item") assumes that a leaf is its root when leaf->bytenr == btrfs_root_bytenr(root), however, we should not use btrfs_root_bytenr(root) since it's mainly got updated during committing transaction. So the check can fail when doing COW on this leaf while it is a root. This changes to use "if (leaf == btrfs_root_node(root))" instead, just like how we check whether leaf is a root in __btrfs_cow_block(). Fixes: 1ba98d08 (Btrfs: detect corruption when non-root leaf has zero item) Cc: stable@vger.kernel.org # 4.8+ Reported-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Reviewed-by: NFilipe Manana <fdmanana@suse.com>
-
- 04 10月, 2016 2 次提交
-
-
由 Omar Sandoval 提交于
There are two separate issues that can lead to corrupted free space trees. 1. The free space tree bitmaps had an endianness issue on big-endian systems which is fixed by an earlier patch in this series. 2. btrfs-progs before v4.7.3 modified filesystems without updating the free space tree. To catch both of these issues at once, we need to force the free space tree to be rebuilt. To do so, add a FREE_SPACE_TREE_VALID compat_ro bit. If the bit isn't set, we know that it was either produced by a broken big-endian kernel or may have been corrupted by btrfs-progs. This also provides us with a way to add rudimentary read-write support for the free space tree to btrfs-progs: it can just clear this bit and have the kernel rebuild the free space tree. Cc: stable@vger.kernel.org # 4.5+ Tested-by: NHolger Hoffstätte <holger@applied-asynchrony.com> Tested-by: NChandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by: NOmar Sandoval <osandov@fb.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Omar Sandoval 提交于
We moved the code for creating the free space tree the first time that it's enabled, but didn't move the clearing code along with it. This breaks my (undocumented) intention that `mount -o clear_cache,space_cache=v2` would clear the free space tree and then recreate it. Fixes: 511711af ("btrfs: don't run delayed references while we are creating the free space tree") Cc: stable@vger.kernel.org # 4.5+ Tested-by: NHolger Hoffstätte <holger@applied-asynchrony.com> Tested-by: NChandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by: NOmar Sandoval <osandov@fb.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 27 9月, 2016 4 次提交
-
-
由 Jeff Mahoney 提交于
For many printks, we want to know which file system issued the message. This patch converts most pr_* calls to use the btrfs_* versions instead. In some cases, this means adding plumbing to allow call sites access to an fs_info pointer. fs/btrfs/check-integrity.c is left alone for another day. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Jeff Mahoney 提交于
This patch converts printk(KERN_* style messages to use the pr_* versions. One side effect is that anything that was KERN_DEBUG is now automatically a dynamic debug message. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Jeff Mahoney 提交于
CodingStyle chapter 2: "[...] never break user-visible strings such as printk messages, because that breaks the ability to grep for them." This patch unsplits user-visible strings. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Liu Bo 提交于
We need to check items in a node to make sure that we're reading a valid one, otherwise we could get various crashes while processing delayed_refs. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 26 9月, 2016 3 次提交
-
-
由 Josef Bacik 提交于
Nobody uses this, it makes no sense to do partial reads of extent buffers. Signed-off-by: NJosef Bacik <jbacik@fb.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Josef Bacik 提交于
We have a lot of random ints in btrfs_fs_info that can be put into flags. This is mostly equivalent with the exception of how we deal with quota going on or off, now instead we set a flag when we are turning it on or off and deal with that appropriately, rather than just having a pending state that the current quota_enabled gets set to. Thanks, Signed-off-by: NJosef Bacik <jbacik@fb.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Liu Bo 提交于
While processing delayed refs, we may update block group's statistics and attach it to cur_trans->dirty_bgs, and later writing dirty block groups will process the list, which happens during btrfs_commit_transaction(). For whatever reason, the transaction is aborted and dirty_bgs is not processed in cleanup_transaction(), we end up with memory leak of these dirty block group cache. Since btrfs_start_dirty_block_groups() doesn't make it go to the commit critical section, this also adds the cleanup work inside it. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 25 8月, 2016 7 次提交
-
-
由 Liu Bo 提交于
Right now we treat leaf which has zero item as a valid one because we could have an empty tree, that is, a root that is also a leaf without any item, however, in the same case but when the leaf is not a root, we can end up with hitting the BUG_ON(1) in btrfs_extend_item() called by setup_inline_extent_backref(). This makes us check the situation as a corruption if leaf is not its own root. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NChris Mason <clm@fb.com>
-
由 Liu Bo 提交于
When btree node (level = 1) has nritems which equals to zero, we can end up with panic due to insert_ptr()'s BUG_ON(slot > nritems); where slot is 1 and nritems is 0, as copy_for_split() calls insert_ptr(.., path->slots[1] + 1, ...); A invalid value results in the whole mess, this adds the check for btree's node nritems so that we stop reading block when when something is wrong. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NChris Mason <clm@fb.com>
-
由 Jeff Mahoney 提交于
commit 909c3a22 (Btrfs: fix loading of orphan roots leading to BUG_ON) avoids the BUG_ON but can add an aliased root to the dead_roots list or leak the root. Since we've already been loading roots into the radix tree, we should use it before looking the root up on disk. Cc: <stable@vger.kernel.org> # 4.5 Signed-off-by: NJeff Mahoney <jeffm@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NChris Mason <clm@fb.com>
-
由 Wang Xiaoguang 提交于
When running fstests generic/068, sometimes we got below deadlock: xfs_io D ffff8800331dbb20 0 6697 6693 0x00000080 ffff8800331dbb20 ffff88007acfc140 ffff880034d895c0 ffff8800331dc000 ffff880032d243e8 fffffffeffffffff ffff880032d24400 0000000000000001 ffff8800331dbb38 ffffffff816a9045 ffff880034d895c0 ffff8800331dbba8 Call Trace: [<ffffffff816a9045>] schedule+0x35/0x80 [<ffffffff816abab2>] rwsem_down_read_failed+0xf2/0x140 [<ffffffff8118f5e1>] ? __filemap_fdatawrite_range+0xd1/0x100 [<ffffffff8134f978>] call_rwsem_down_read_failed+0x18/0x30 [<ffffffffa06631fc>] ? btrfs_alloc_block_rsv+0x2c/0xb0 [btrfs] [<ffffffff810d32b5>] percpu_down_read+0x35/0x50 [<ffffffff81217dfc>] __sb_start_write+0x2c/0x40 [<ffffffffa067f5d5>] start_transaction+0x2a5/0x4d0 [btrfs] [<ffffffffa067f857>] btrfs_join_transaction+0x17/0x20 [btrfs] [<ffffffffa068ba34>] btrfs_evict_inode+0x3c4/0x5d0 [btrfs] [<ffffffff81230a1a>] evict+0xba/0x1a0 [<ffffffff812316b6>] iput+0x196/0x200 [<ffffffffa06851d0>] btrfs_run_delayed_iputs+0x70/0xc0 [btrfs] [<ffffffffa067f1d8>] btrfs_commit_transaction+0x928/0xa80 [btrfs] [<ffffffffa0646df0>] btrfs_freeze+0x30/0x40 [btrfs] [<ffffffff81218040>] freeze_super+0xf0/0x190 [<ffffffff81229275>] do_vfs_ioctl+0x4a5/0x5c0 [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70 [<ffffffff810038cf>] ? syscall_trace_enter_phase1+0x11f/0x140 [<ffffffff81229409>] SyS_ioctl+0x79/0x90 [<ffffffff81003c12>] do_syscall_64+0x62/0x110 [<ffffffff816acbe1>] entry_SYSCALL64_slow_path+0x25/0x25 >From this warning, freeze_super() already holds SB_FREEZE_FS, but btrfs_freeze() will call btrfs_commit_transaction() again, if btrfs_commit_transaction() finds that it has delayed iputs to handle, it'll start_transaction(), which will try to get SB_FREEZE_FS lock again, then deadlock occurs. The root cause is that in btrfs, sync_filesystem(sb) does not make sure all metadata is updated. There still maybe some codes adding delayed iputs, see below sample race window: CPU1 | CPU2 |-> freeze_super() | |-> sync_filesystem(sb); | | |-> cleaner_kthread() | | |-> btrfs_delete_unused_bgs() | | |-> btrfs_remove_chunk() | | |-> btrfs_remove_block_group() | | |-> btrfs_add_delayed_iput() | | |-> sb->s_writers.frozen = SB_FREEZE_FS; | |-> sb_wait_write(sb, SB_FREEZE_FS); | | acquire SB_FREEZE_FS lock. | | | |-> btrfs_freeze() | |-> btrfs_commit_transaction() | |-> btrfs_run_delayed_iputs() | | will handle delayed iputs, | | that means start_transaction() | | will be called, which will try | | to get SB_FREEZE_FS lock. | To fix this issue, introduce a "int fs_frozen" to record internally whether fs has been frozen. If fs has been frozen, we can not handle delayed iputs. Signed-off-by: NWang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> [ add comment to btrfs_freeze ] Signed-off-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NChris Mason <clm@fb.com>
-
由 Jeff Mahoney 提交于
We wait on qgroup rescan completion in three places: file system shutdown, the quota disable ioctl, and the rescan wait ioctl. If the user sends a signal while we're waiting, we continue happily along. This is expected behavior for the rescan wait ioctl. It's racy in the shutdown path but mostly works due to other unrelated synchronization points. In the quota disable path, it Oopses the kernel pretty much immediately. Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by: NJeff Mahoney <jeffm@suse.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NChris Mason <clm@fb.com>
-
由 Jeff Mahoney 提交于
The qgroup_flags field is overloaded such that it reflects the on-disk status of qgroups and the runtime state. The BTRFS_QGROUP_STATUS_FLAG_RESCAN flag is used to indicate that a rescan operation is in progress, but if the file system is unmounted while a rescan is running, the rescan operation is paused. If the file system is then mounted read-only, the flag will still be present but the rescan operation will not have been resumed. When we go to umount, btrfs_qgroup_wait_for_completion will see the flag and interpret it to mean that the rescan worker is still running and will wait for a completion that will never come. This patch uses a separate flag to indicate when the worker is running. The locking and state surrounding the qgroup rescan worker needs a lot of attention beyond this patch but this is enough to avoid a hung umount. Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by; Jeff Mahoney <jeffm@suse.com> Reviewed-by: NQu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NChris Mason <clm@fb.com>
-
由 Liu Bo 提交于
When some critical errors occur and FS would be flipped into RO, if we have an on-going balance, we can end up with a memory leak of root->reloc_root since btrfs_drop_snapshots() bails out without freeing reloc_root at the very early start. However, we're not able to free reloc_root in btrfs_drop_snapshots() because its caller, merge_reloc_roots(), still needs to access it to cleanup reloc_root's rbtree. This makes us free reloc_root when we're going to free fs/file roots. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NChris Mason <clm@fb.com>
-
- 08 8月, 2016 1 次提交
-
-
由 Jens Axboe 提交于
Since commit 63a4cc24, bio->bi_rw contains flags in the lower portion and the op code in the higher portions. This means that old code that relies on manually setting bi_rw is most likely going to be broken. Instead of letting that brokeness linger, rename the member, to force old and out-of-tree code to break at compile time instead of at runtime. No intended functional changes in this commit. Signed-off-by: NJens Axboe <axboe@fb.com>
-
- 26 7月, 2016 6 次提交
-
-
由 Jeff Mahoney 提交于
Now that we have a dummy fs_info associated with each test that uses a root, we don't need the DUMMY_ROOT bit anymore. This lets us make choices without needing an actual root like in e.g. btrfs_find_create_tree_block. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Jeff Mahoney 提交于
This allows the upcoming patchset to push nodesize and sectorsize into fs_info. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Jeff Mahoney 提交于
btrfs_test_opt and friends only use the root pointer to access the fs_info. Let's pass the fs_info directly in preparation to eliminate similar patterns all over btrfs. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Jeff Mahoney 提交于
In order to provide an fsid for trace events, we'll need a btrfs_fs_info pointer. The most lightweight way to do that for btrfs_work structures is to associate it with the __btrfs_workqueue structure. Each queued btrfs_work structure has a workqueue associated with it, so that's a natural fit. It's a privately defined structures, so we add accessors to retrieve the fs_info pointer. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Nikolay Borisov 提交于
BTRFS is using a variety of slab caches to satisfy internal needs. Those slab caches are always allocated with the SLAB_RECLAIM_ACCOUNT, meaning allocations from the caches are going to be accounted as SReclaimable. At the same time btrfs is not registering any shrinkers whatsoever, thus preventing memory from the slabs to be shrunk. This means those caches are not in fact reclaimable. To fix this remove the SLAB_RECLAIM_ACCOUNT on all caches apart from the inode cache, since this one is being freed by the generic VFS super_block shrinker. Also set the transaction related caches as SLAB_TEMPORARY, to better document the lifetime of the objects (it just translates to SLAB_RECLAIM_ACCOUNT). Signed-off-by: NNikolay Borisov <n.borisov.lkml@gmail.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Liu Bo 提交于
I got this warning while mounting a btrfs image, [ 3020.509606] ------------[ cut here ]------------ [ 3020.510107] WARNING: CPU: 3 PID: 5581 at lib/idr.c:1051 ida_remove+0xca/0x190 [ 3020.510853] ida_remove called for id=42 which is not allocated. [ 3020.511466] Modules linked in: [ 3020.511802] CPU: 3 PID: 5581 Comm: mount Not tainted 4.7.0-rc5+ #274 [ 3020.512438] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.2-20150714_191134- 04/01/2014 [ 3020.513385] 0000000000000286 0000000021295d86 ffff88006c66b8f0 ffffffff8182ba5a [ 3020.514153] 0000000000000000 0000000000000009 ffff88006c66b930 ffffffff810e0ed7 [ 3020.514928] 0000041b00000000 ffffffff8289a8c0 ffff88007f437880 0000000000000000 [ 3020.515717] Call Trace: [ 3020.515965] [<ffffffff8182ba5a>] dump_stack+0xc9/0x13f [ 3020.516487] [<ffffffff810e0ed7>] __warn+0x147/0x160 [ 3020.517005] [<ffffffff810e0f4f>] warn_slowpath_fmt+0x5f/0x80 [ 3020.517572] [<ffffffff8182e6ca>] ida_remove+0xca/0x190 [ 3020.518075] [<ffffffff813a2bcc>] free_anon_bdev+0x2c/0x60 [ 3020.518609] [<ffffffff81657a9f>] free_fs_root+0x13f/0x160 [ 3020.519138] [<ffffffff8165c679>] btrfs_get_fs_root+0x379/0x3d0 [ 3020.519710] [<ffffffff81e6e975>] ? __mutex_unlock_slowpath+0x155/0x2c0 [ 3020.520366] [<ffffffff816615b1>] open_ctree+0x2e91/0x3200 [ 3020.520965] [<ffffffff8161ede2>] btrfs_mount+0x1322/0x15b0 [ 3020.521536] [<ffffffff81e60e74>] ? kmemleak_alloc_percpu+0x44/0x170 [ 3020.522167] [<ffffffff8115f5e1>] ? lockdep_init_map+0x61/0x210 [ 3020.522780] [<ffffffff813a4f59>] mount_fs+0x49/0x2c0 [ 3020.523305] [<ffffffff813d840c>] vfs_kern_mount+0xac/0x1b0 [ 3020.523872] [<ffffffff8161dee1>] btrfs_mount+0x421/0x15b0 [ 3020.524402] [<ffffffff81e60e74>] ? kmemleak_alloc_percpu+0x44/0x170 [ 3020.525045] [<ffffffff8115f5e1>] ? lockdep_init_map+0x61/0x210 [ 3020.525657] [<ffffffff8115f5e1>] ? lockdep_init_map+0x61/0x210 [ 3020.526289] [<ffffffff813a4f59>] mount_fs+0x49/0x2c0 [ 3020.526803] [<ffffffff813d840c>] vfs_kern_mount+0xac/0x1b0 [ 3020.527365] [<ffffffff813dc27a>] do_mount+0x41a/0x1770 [ 3020.527899] [<ffffffff812e800d>] ? strndup_user+0x6d/0xc0 [ 3020.528447] [<ffffffff812e7f68>] ? memdup_user+0x78/0xb0 [ 3020.528987] [<ffffffff813ddad0>] SyS_mount+0x150/0x160 [ 3020.529493] [<ffffffff81e72b7c>] entry_SYSCALL_64_fastpath+0x1f/0xbd It turns out that we free fs root twice, btrfs_init_fs_root() calls free_anon_bdev(root->anon_dev) and later then btrfs_get_fs_root() cals free_fs_root which does another free_anon_bdev() and it ends up with the above warning. Instead of reset root->anon_dev to 0 after free_anon_bdev(), we can let btrfs_init_fs_root() return directly since its callers have already done the free job by calling free_fs_root(). Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Reviewed-by: NChandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 24 6月, 2016 1 次提交
-
-
由 Chandan Rajendra 提交于
Btrfs code currently assumes stripesize to be same as sectorsize. However Btrfs-progs (until commit df05c7ed455f519e6e15e46196392e4757257305) has been setting btrfs_super_block->stripesize to a value of 4096. This commit makes sure that the value of btrfs_super_block->stripesize is a power of 2. Later, it unconditionally sets btrfs_root->stripesize to sectorsize. Signed-off-by: NChandan Rajendra <chandan@linux.vnet.ibm.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NChris Mason <clm@fb.com>
-
- 18 6月, 2016 3 次提交
-
-
由 Chandan Rajendra 提交于
Older btrfs-progs/mkfs.btrfs sets 4096 as the stripesize. Hence restricting stripesize to be equal to sectorsize would cause super block validation to return an error on architectures where PAGE_SIZE is not equal to 4096. Hence as a workaround, this commit allows stripesize to be set to 4096 bytes. Signed-off-by: NChandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Zygo Blaxell 提交于
This fixes a problem introduced in commit 2f3165ec "btrfs: don't force mounts to wait for cleaner_kthread to delete one or more subvolumes". open_ctree eventually calls btrfs_replay_log which in turn calls btrfs_commit_super which tries to lock the cleaner_mutex, causing a recursive mutex deadlock during mount. Instead of playing whack-a-mole trying to keep up with all the functions that may want to lock cleaner_mutex, put all the cleaner_mutex lockers back where they were, and attack the problem more directly: keep cleaner_kthread asleep until the filesystem is mounted. When filesystems are mounted read-only and later remounted read-write, open_ctree did not set fs_info->open and neither does anything else. Set this flag in btrfs_remount so that neither btrfs_delete_unused_bgs nor cleaner_kthread get confused by the common case of "/" filesystem read-only mount followed by read-write remount. Signed-off-by: NZygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Liu Bo 提交于
Thanks to fuzz testing, we can pass an invalid bytenr to extent buffer via alloc_extent_buffer(). An unaligned eb can have more pages than it should have, which ends up extent buffer's leak or some corrupted content in extent buffer. This adds a warning to let us quickly know what was happening. Now that alloc_extent_buffer() no more returns NULL, this changes its caller and callers of its caller to match with the new error handling. Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 08 6月, 2016 4 次提交
-
-
由 Mike Christie 提交于
The bio REQ_OP and bi_rw rq_flag_bits are now always setup, so there is no need to pass around the rq_flag_bits bits too. btrfs users should should access the bio insead. Signed-off-by: NMike Christie <mchristi@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 Mike Christie 提交于
This should be the easier cases to convert btrfs to bio_set_op_attrs/bio_op. They are mostly just cut and replace type of changes. Signed-off-by: NMike Christie <mchristi@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 Mike Christie 提交于
This has submit_bh users pass in the operation and flags separately, so submit_bh_wbc can setup the bio op and bi_rw flags on the bio that is submitted. Signed-off-by: NMike Christie <mchristi@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NJens Axboe <axboe@fb.com>
-
由 Mike Christie 提交于
This has callers of submit_bio/submit_bio_wait set the bio->bi_rw instead of passing it in. This makes that use the same as generic_make_request and how we set the other bio fields. Signed-off-by: NMike Christie <mchristi@redhat.com> Fixed up fs/ext4/crypto.c Signed-off-by: NJens Axboe <axboe@fb.com>
-
- 06 6月, 2016 2 次提交
-
-
由 Feifei Xu 提交于
This commit replaces numerical constants with appropriate preprocessor macros. Reviewed-by: NJosef Bacik <jbacik@fb.com> Signed-off-by: NChandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by: NFeifei Xu <xufeifei@linux.vnet.ibm.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 Liu Bo 提交于
This adds validation checks for super_total_bytes, super_bytes_used and super_stripesize, super_num_devices. Reported-by: NVegard Nossum <vegard.nossum@oracle.com> Reported-by: NQuentin Casasnovas <quentin.casasnovas@oracle.com> Reviewed-by: NDavid Sterba <dsterba@suse.com> Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 03 6月, 2016 1 次提交
-
-
由 Feifei Xu 提交于
self-tests code assumes 4k as the sectorsize and nodesize. This commit fix hardcoded 4K. Enables the self-tests code to be executed on non-4k page sized systems (e.g. ppc64). Reviewed-by: NJosef Bacik <jbacik@fb.com> Signed-off-by: NFeifei Xu <xufeifei@linux.vnet.ibm.com> Signed-off-by: NChandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 26 5月, 2016 1 次提交
-
-
由 Nicholas D Steeves 提交于
Signed-off-by: NNicholas D Steeves <nsteeves@gmail.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 10 5月, 2016 2 次提交
-
-
由 David Sterba 提交于
Masking HIGHMEM out of NOFS does not make sense. Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
由 David Sterba 提交于
Currently we lack the identification of the filesystem in most if not all mount messages, done via printk/pr_* functions. We can use the btrfs_* helpers in open_ctree, as the fs_info <-> sb link is established at the beginning of the function. The messages have been updated at the same time to be more consistent: * dropped sb->s_id, as it's not available via btrfs_* * added %d for return code where appropriate * wording changed * %Lx replaced by %llx Signed-off-by: NDavid Sterba <dsterba@suse.com>
-
- 06 5月, 2016 1 次提交
-
-
由 Zygo Blaxell 提交于
During a mount, we start the cleaner kthread first because the transaction kthread wants to wake up the cleaner kthread. We start the transaction kthread next because everything in btrfs wants transactions. We do reloc recovery in the thread that was doing the original mount call once the transaction kthread is running. This means that the cleaner kthread could already be running when reloc recovery happens (e.g. if a snapshot delete was started before a crash). Relocation does not play well with the cleaner kthread, so a mutex was added in commit 5f316481 "Btrfs: fix race between balance recovery and root deletion" to prevent both from being active at the same time. If the cleaner kthread is already holding the mutex by the time we get to btrfs_recover_relocation, the mount will be blocked until at least one deleted subvolume is cleaned (possibly more if the mount process doesn't get the lock right away). During this time (which could be an arbitrarily long time on a large/slow filesystem), the mount process is stuck and the filesystem is unnecessarily inaccessible. Fix this by locking cleaner_mutex before we start cleaner_kthread, and unlocking the mutex after mount no longer requires it. This ensures that the mounting process will not be blocked by the cleaner kthread. The cleaner kthread is already prepared for mutex contention and will just go to sleep until the mutex is available. Signed-off-by: NZygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: NFilipe Manana <fdmanana@suse.com> Signed-off-by: NDavid Sterba <dsterba@suse.com>
-