STATE_INIT and STATE_FINI are equivalent and represent incompletely
initialised states; combine them as STATE_UNINIT.

Rename STATE_RUNNING to STATE_READY, to avoid confusion with
netif_running() and IFF_RUNNING.

The comments do not quite match current usage, but this will be
corrected in subsequent fixes.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

We only use tso_state::full_packet_space to calculate the IPv4 tot_len
or IPv6 payload_len, not to set tso_state::packet_space.  Replace it
with an ip_base_len field holding the value of tot_len or payload_len
before including the TCP payload, which is much more useful when
constructing the new headers.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

TSO header buffers contain a control structure immediately followed by
the packet headers, and are kept on a free list when not in use.  This
complicates buffer management and tends to result in cache read misses
when we recycle such buffers (particularly if DMA-coherent memory
requires caches to be disabled).

Replace the free list with a simple mapping by descriptor index.  We
know that there is always a payload descriptor between any two
descriptors with TSO header buffers, so we can allocate only one
such buffer for each two descriptors.

While we're at it, use a standard error code for allocation failure,
not -1.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

We now have a definite upper bound on the number of descriptors per
skb; use that to stop the queue when the next packet might not fit.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Add a flags field to struct efx_tx_buffer, replacing the
continuation and map_single booleans.

Since a single descriptor cannot be both a TSO header and the last
descriptor for an skb, unionise efx_tx_buffer::{skb,tsoh} and add
flags for validity of these fields.

Clear all flags in free buffers (whereas previously the continuation
flag would be set).
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Similar to fsl_pq_mdio.c, this driver is for the 10G MDIO controller on
Freescale Frame Manager Ethernet controllers.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The helper functions which translate IEEE MDIO Manageable Device (MMD)
Energy-Efficient Ethernet (EEE) registers 3.20, 7.60 and 7.61 to and from
the comparable ethtool supported/advertised settings will be needed by
drivers other than those in PHYLIB (e.g. e1000e in a follow-on patch).

In the same fashion as similar translation functions in linux/mii.h, move
these functions from the PHYLIB core to the linux/mdio.h header file so the
code will not have to be duplicated in each driver needing MMD-to-ethtool
(and vice-versa) translations.  The function and some variable names have
been renamed to be more descriptive.

Not tested on the only hardware that currently calls the related functions,
stmmac, because I don't have access to any.  Has been compile tested and
the translations have been tested on a locally modified version of e1000e.
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the "bonding" driver does not support load balancing outgoing
traffic in LACP mode for IPv6 traffic. IPv4 (and TCP or UDP over IPv4)
are currently supported; this patch adds transmit hashing for IPv6 (and
TCP or UDP over IPv6), bringing IPv6 up to par with IPv4 support in the
bonding driver. In addition, bounds checking has been added to all
transmit hashing functions.

The algorithm chosen (xor'ing the bottom three quads of the source and
destination addresses together, then xor'ing each byte of that result into
the bottom byte, finally xor'ing with the last bytes of the MAC addresses)
was selected after testing almost 400,000 unique IPv6 addresses harvested
from server logs. This algorithm had the most even distribution for both
big- and little-endian architectures while still using few instructions. Its
behavior also attempts to closely match that of the IPv4 algorithm.

The IPv6 flow label was intentionally not included in the hash as it appears
to be unset in the vast majority of IPv6 traffic sampled, and the current
algorithm not using the flow label already offers a very even distribution.

Fragmented IPv6 packets are handled the same way as fragmented IPv4 packets,
ie, they are not balanced based on layer 4 information. Additionally,
IPv6 packets with intermediate headers are not balanced based on layer
4 information. In practice these intermediate headers are not common and
this should not cause any problems, and the alternative (a packet-parsing
loop and look-up table) seemed slow and complicated for little gain.
Tested-by: NJohn Eaglesham <linux@8192.net>
Signed-off-by: NJohn Eaglesham <linux@8192.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix unused variable compiler warning when built with CONFIG_RAPIDIO_DEBUG
option off.

This patch is applicable to kernel versions starting from v3.2
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make sure that there is no doorbell messages left behind due to disabled
interrupts during inbound doorbell processing.

The most common case for this bug is loss of rionet JOIN messages in
systems with three or more rionet participants and MSI or MSI-X enabled.
As result, requests for packet transfers may finish with "destination
unreachable" error message.

This patch is applicable to kernel versions starting from v3.2.
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Correct the offset by subtracting 20 from tm_hour before taking the
modulo 12.

[ "Why 20?" I hear you ask. Or at least I did.

  Here's the reason why: RS5C348_BIT_PM is 32, and is - stupidly -
  included in the RS5C348_HOURS_MASK define.  So it's really subtracting
  out that bit to get "hour+12".  But then because it does things modulo
  12, it needs to add the 12 in again afterwards anyway.

  This code is confused.  It would be much clearer if RS5C348_HOURS_MASK
  just didn't include the RS5C348_BIT_PM bit at all, then it wouldn't
  need to do the silly subtract either.

  Whatever. It's all just math, the end result is the same.   - Linus ]
Reported-by: NJames Nute <newten82@gmail.com>
Tested-by: NJames Nute <newten82@gmail.com>
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Dynamically allocated sysfs attributes must be initialized using
sysfs_attr_init(), otherwise lockdep complains: BUG: key <address> not in
.data!

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NIlya Shchepetkov <shchepetkov@ispras.ru>
Cc: Chris Verges <chrisv@cyberswitching.com>
Cc: Christian Pellegrin <chripell@fsfe.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On many of our larger systems, CPU 0 has had all of its IRQ resources
consumed before XPC loads.  Worst cases on machines with multiple 10
GigE cards and multiple IB cards have depleted the entire first socket
of IRQs.

This patch makes selecting the node upon which IRQs are allocated (as
well as all the other GRU Message Queue structures) specifiable as a
module load param and has a default behavior of searching all nodes/cpus
for an available resources.

[akpm@linux-foundation.org: fix build: include cpu.h and module.h]
Signed-off-by: NRobin Holt <holt@sgi.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Delete code which sets SCSI status incorrectly as it's already been set
correctly above this incorrect code.  The bug was introduced in 2009 by
commit b0e15f6d ("cciss: fix typo that causes scsi status to be
lost.")
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Reported-by: NRoel van Meer <roel.vanmeer@bokxing.nl>
Tested-by: NRoel van Meer <roel.vanmeer@bokxing.nl>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NJens Rottmann <JRottmann@LiPPERTEmbedded.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

So we've had a fair few reports of fbcon handover breakage between
efi/vesafb and i915 surface recently, so I dedicated a couple of
days to finding the problem.

Essentially the last thing we saw was the conflicting framebuffer
message and that was all.

So after much tracing with direct netconsole writes (printks
under console_lock not so useful), I think I found the race.

  Thread A (driver load)    Thread B (timer thread)
    unbind_con_driver ->              |
    bind_con_driver ->                |
    vc->vc_sw->con_deinit ->          |
    fbcon_deinit ->                   |
    console_lock()                    |
        |                             |
        |                       fbcon_flashcursor timer fires
        |                       console_lock() <- blocked for A
        |
        |
  fbcon_del_cursor_timer ->
    del_timer_sync
    (BOOM)

Of course because all of this is under the console lock,
we never see anything, also since we also just unbound the active
console guess what we never see anything.

Hopefully this fixes the problem for anyone seeing vesafb->kms
driver handoff.
Signed-off-by: NDavid Airlie <airlied@redhat.com>
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Cc: stable@vger.kernel.org
Tested-by: NJosh Boyer <jwboyer@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is the implementation for igb to allow forcing MDI state
via ethtool, allowing users to work around some improperly
behaving switches.

Forcing in this driver is for now only allowed when auto-neg is
enabled.
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
CC: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Aaron Brown aaron.f.brown@intel.com
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Some users report issues with link failing when connected to certain
switches.  This gives the user the ability to control the MDI state
from the driver, allowing users to work around some improperly
behaving switches.

Forcing in this driver is for now only allowed when auto-neg is
enabled.

This is in regards to the related ethtool app patch and
bugzilla.kernel.org bug 11998
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
CC: bruce.w.allan@intel.com
CC: n.poppelier@xs4all.nl
CC: bastien@durel.org
CC: jsveiga@it.eng.br
Tested-by: Aaron Brown aaron.f.brown@intel.com
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This is the implementation in e1000 to allow ethtool to force
MDI state, allowing users to work around some improperly
behaving switches.

Forcing in this driver is for now only allowed when auto-neg is enabled.

To use must have the matching version of ethtool app that supports
this functionality.
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
CC: Tushar Dave <tushar.n.dave@intel.com>
Tested-by: Aaron Brown aaron.f.brown@intel.com
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

In order for igb to support MDI setting support via
ethtool this code is needed to allow setting the MDI state
via software.

This is in regards to the related ethtool patch
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Aaron Brown aaron.f.brown@intel.com
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

In order for e1000e to support MDI setting support via
ethtool this code is needed to allow setting the MDI state
via software.

This is in regards to the related ethtool patch and
fixes bugzilla.kernel.org bug 11998
Signed-off-by: NBruce W Allan <bruce.w.allan@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Aaron Brown aaron.f.brown@intel.com
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Fix config warning:

warning: ( ... && DRM_USB) selects USB which has unmet direct dependencies
(USB_SUPPORT && USB_ARCH_HAS_HCD)

and build error:
ERROR: "usb_speed_string" [drivers/usb/core/usbcore.ko] undefined!

by adding the missing dependency on USB_ARCH_HAS_HCD to DRM_UDL and DRM_USB.

This exposes:
drivers/video/Kconfig:36:error: recursive dependency detected!
drivers/video/Kconfig:36:       symbol FB is selected by DRM_KMS_HELPER
drivers/gpu/drm/Kconfig:28:     symbol DRM_KMS_HELPER is selected by DRM_UDL
drivers/gpu/drm/udl/Kconfig:1:  symbol DRM_UDL depends on USB_ARCH_HAS_HCD
drivers/usb/Kconfig:78: symbol USB_ARCH_HAS_HCD depends on USB_ARCH_HAS_OHCI
drivers/usb/Kconfig:16: symbol USB_ARCH_HAS_OHCI depends on I2C
drivers/i2c/Kconfig:5:  symbol I2C is selected by FB_DDC
drivers/video/Kconfig:86:       symbol FB_DDC is selected by FB_CYBER2000_DDC
drivers/video/Kconfig:385:      symbol FB_CYBER2000_DDC depends on FB_CYBER2000
drivers/video/Kconfig:373:      symbol FB_CYBER2000 depends on FB

which is due to drivers/usb/Kconfig:
config USB_ARCH_HAS_OHCI
	...
	default y if ARCH_PNX4008 && I2C

Fix by dropping I2C from the above dependency; logic is that this is not a
platform dependency but a configuration dependency: the _architecture_ still
supports USB even is I2C is not selected.

This exposes:
drivers/video/Kconfig:36:error: recursive dependency detected!
drivers/video/Kconfig:36:       symbol FB is selected by DRM_KMS_HELPER
drivers/gpu/drm/Kconfig:28:     symbol DRM_KMS_HELPER is selected by DRM_UDL
drivers/gpu/drm/udl/Kconfig:1:  symbol DRM_UDL depends on USB_ARCH_HAS_HCD
drivers/usb/Kconfig:78: symbol USB_ARCH_HAS_HCD depends on USB_ARCH_HAS_OHCI
drivers/usb/Kconfig:17: symbol USB_ARCH_HAS_OHCI depends on MFD_TC6393XB
drivers/mfd/Kconfig:396:        symbol MFD_TC6393XB depends on GPIOLIB
drivers/gpio/Kconfig:35:        symbol GPIOLIB is selected by FB_VIA
drivers/video/Kconfig:1560:     symbol FB_VIA depends on FB

which can be fixed by having MFD_TC6393XB select GPIOLIB instead of depending on
it.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The patch adds support for Lenovo IdeaPad Z570 laptop. It makes all special
keys working, adds possibility to control fan like Windows does, controls
Touchpad Disabled LED, toggles touchpad state via keyboard controller and
corrects touchpad behavior on resume from suspend. It is new, modified
version of patch. Now it does not depend on psmouse and does not need patching
of input subsystem.
Signed-off-by: NMaxim Mikityanskiy <maxtram95@gmail.com>

This is the part 3 for fan control
Signed-off-by: NIke Panhc <ike.pan@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

The patch adds support for Lenovo IdeaPad Z570 laptop. It makes all special
keys working, adds possibility to control fan like Windows does, controls
Touchpad Disabled LED, toggles touchpad state via keyboard controller and
corrects touchpad behavior on resume from suspend. It is new, modified
version of patch. Now it does not depend on psmouse and does not need patching
of input subsystem.
Signed-off-by: NMaxim Mikityanskiy <maxtram95@gmail.com>

This is part 2 for touchpad toggle
Signed-off-by: NIke Panhc <ike.pan@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

The patch adds support for Lenovo IdeaPad Z570 laptop. It makes all special
keys working, adds possibility to control fan like Windows does, controls
Touchpad Disabled LED, toggles touchpad state via keyboard controller and
corrects touchpad behavior on resume from suspend. It is new, modified
version of patch. Now it does not depend on psmouse and does not need patching
of input subsystem.
Signed-off-by: NMaxim Mikityanskiy <maxtram95@gmail.com>

This is part 1 for special button handling.
Signed-off-by: NIke Panhc <ike.pan@canonical.com>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>

This netconsole_target_put() is obviously redundant, and it
causes a kernel segfault when removing a bridge device which has
netconsole running on it.

This is caused by:

	commit 8d8fc29d
	Author: Amerigo Wang <amwang@redhat.com>
	Date:   Thu May 19 21:39:10 2011 +0000

	    netpoll: disable netpoll when enslave a device

Cc: David Miller <davem@davemloft.net>
 (for all 3.x stable releases)
Cc: stable@vger.kernel.org
Signed-off-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When getting clock, give a chance to the CPUs without DT support,
which use Common Clock Framework, such as Loongson1B.
Signed-off-by: NKelvin Cheung <keguang.zhang@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is resolved by two things:
1) allow dev_addr of different length than ETH_ALEN
2) during port add, check for dev->type and change it if necessary
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret;
expression e1,e2;
@@

if (ret < 0)
 { ... return ret; }
 ... when != ret = e1
     when forall
*if(...)
 {
  ... when != ret = e2
* return ret;
 }
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move up the initialization of rc so that failure of pci_alloc_consistent
returns -ENOMEM as well.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret;
expression e1,e2;
@@

if (ret < 0)
 { ... return ret; }
 ... when != ret = e1
     when forall
*if(...)
 {
  ... when != ret = e2
* return ret;
 }
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret;
expression e1,e2;
@@

if (ret < 0)
 { ... return ret; }
 ... when != ret = e1
     when forall
*if(...)
 {
  ... when != ret = e2
* return ret;
 }
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Newer firmware versions for the Pantech UML290 use a different
subclass ID.  The Windows driver match on both IDs, so we do
that as well.

The ZTE (Vodafone) K5006-Z is a new device.

Cc: Dan Williams <dcbw@redhat.com>
Cc: Thomas Schäfer <tschaefer@t-online.de>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The mdio-mux driver scans all child mdio nodes, without regard to whether
the node is actually used.  Some device trees include all possible
mdio-mux nodes and rely on the boot loader to disable those that are not
present, based on some run-time configuration.  Those nodes need to be
skipped.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Macro for_each_child_of_node() makes it easy to iterate over all of the
children for a given device tree node, including those nodes that are
marked as unavailable (i.e. status = "disabled").

Introduce for_each_available_child_of_node(), which is like
for_each_child_of_node(), but it automatically skips unavailable nodes.
This also requires the introduction of helper function
of_get_next_available_child(), which returns the next available child
node.
Signed-off-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit af7f2158 was done against master, and clashed with structured
logging's change of KERN_LEVEL to SOH.

Bisected and fixed by Markus Trippelsdorf.
Reported-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: NJim Cromie <jim.cromie@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>

If a device specifies zero endpoints in its interface descriptor,
the kernel oopses in acm_probe(). Even though that's clearly an
invalid descriptor, we should test wether we have all endpoints.
This is especially bad as this oops can be triggered by just
plugging a USB device in.
Signed-off-by: NSven Schnelle <svens@stackframe.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This structure needs to always stick around, even if CONFIG_HOTPLUG
is disabled, otherwise we can oops when trying to probe a device that
was added after the structure is thrown away.

Thanks to Fengguang Wu and Bjørn Mork for tracking this issue down.
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Reported-by: NBjørn Mork <bjorn@mork.no>
Cc: stable <stable@vger.kernel.org>
CC: Paul Gortmaker <paul.gortmaker@windriver.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Felipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>