- 27 9月, 2018 5 次提交
-
-
由 Bhawanpreet Lakha 提交于
[Why] EDID emulation didn't work properly for linux, as we stop programming if nothing is connected physically. [How] We get a flag from DRM when we want to do edid emulation. We check if this flag is true and nothing is connected physically, if so we only program the front end using VIRTUAL_SIGNAL. Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com> Acked-by: NLeo Li <sunpeng.li@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Roman Li 提交于
[Why] There have been a few reports of Vega10 display remaining blank after S3 resume. The regression is caused by workaround for mode change on Vega10 - skip set_bandwidth if stream count is 0. As a result we skipped dispclk reset on suspend, thus on resume we may skip the clock update assuming it hasn't been changed. On some systems it causes display blank or 'out of range'. [How] Revert "drm/amd/display: Fix Vega10 black screen after mode change" Verified that it hadn't cause mode change regression. Signed-off-by: NRoman Li <Roman.Li@amd.com> Reviewed-by: NSun peng Li <Sunpeng.Li@amd.com> Acked-by: NLeo Li <sunpeng.li@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Rex Zhu 提交于
The vce cancel_delayed_work_sync never be called. driver call the function in error path. This caused the A+A suspend hang when runtime pm enebled. As we will visit the smu in the idle queue. this will cause smu hang because the dgpu has been suspend, and the dgpu also will be waked up. As the smu has been hang, so the dgpu resume will failed. Reviewed-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com> Signed-off-by: NRex Zhu <Rex.Zhu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Linus Walleij 提交于
This reverts commit 0c08754b. commit 0c08754b ("drm/panel: Add device_link from panel device to DRM device") creates a circular dependency under these circumstances: 1. The panel depends on dsi-host because it is MIPI-DSI child device. 2. dsi-host depends on the drm parent device (connector->dev->dev) this should be allowed. 3. drm parent dev (connector->dev->dev) depends on the panel after this patch. This makes the dependency circular and while it appears it does not affect any in-tree drivers (they do not seem to have dsi hosts depending on the same parent device) this does not seem right. As noted in a response from Andrzej Hajda, the intent is likely to make the panel dependent on the DRM device (connector->dev) not its parent. But we have no way of doing that since the DRM device doesn't contain any struct device on its own (arguably it should). Revert this until a proper approach is figured out. Cc: Jyri Sarha <jsarha@ti.com> Cc: Eric Anholt <eric@anholt.net> Cc: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NSean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180927124130.9102-1-linus.walleij@linaro.org
-
由 Mika Westerberg 提交于
HP 6730b laptop has an ethernet NIC connected to one of the PCIe root ports. The root ports themselves are native PCIe hotplug capable. Now, during boot after PCI devices are scanned the BIOS triggers ACPI bus check directly to the NIC: ACPI: \_SB_.PCI0.RP06.NIC_: Bus check in hotplug_event() It is not clear why it is sending bus check but regardless the ACPI hotplug notify handler calls enable_slot() directly (instead of going through acpiphp_check_bridge() as there is no bridge), which ends up handling special case for non-hotplug bridges with native PCIe hotplug. This results a crash of some kind but the reporter only sees black screen so it is hard to figure out the exact spot and what actually happens. Based on a few fix proposals it was tracked to crash somewhere inside pci_assign_unassigned_bridge_resources(). In any case we should not really be in that special branch at all because the ACPI notify happened to a slot that is not a PCI bridge (it is just a regular PCI device). Fix this so that we only go to that special branch if we are calling enable_slot() for a bridge (e.g., the ACPI notification was for the bridge). Link: https://bugzilla.kernel.org/show_bug.cgi?id=201127 Fixes: 84c8b58e ("ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug") Reported-by: NPeter Anemone <peter.anemone@gmail.com> Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org # v4.18+
-
- 26 9月, 2018 5 次提交
-
-
由 Jason Ekstrand 提交于
We attempt to get fences earlier in the hopes that everything will already have fences and no callbacks will be needed. If we do succeed in getting a fence, getting one a second time will result in a duplicate ref with no unref. This is causing memory leaks in Vulkan applications that create a lot of fences; playing for a few hours can, apparently, bring down the system. Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107899Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NJason Ekstrand <jason@jlekstrand.net> Signed-off-by: NSean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180926071703.15257-1-jason.ekstrand@intel.com
-
由 Arindam Nath 提交于
ACPI HID devices do not actually have an alias for them in the IVRS. But dev_data->alias is still used for indexing into the IOMMU device table for devices being handled by the IOMMU. So for ACPI HID devices, we simply return the corresponding devid as an alias, as parsed from IVRS table. Signed-off-by: NArindam Nath <arindam.nath@amd.com> Fixes: 2bf9a0a1 ('iommu/amd: Add iommu support for ACPI HID devices') Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
由 Parav Pandit 提交于
Currently add_modify_gid() for IB link layer has followong issue in cache update path. When GID update event occurs, core releases reference to the GID table without updating its state and/or entry pointer. CPU-0 CPU-1 ------ ----- ib_cache_update() IPoIB ULP add_modify_gid() [..] put_gid_entry() refcnt = 0, but state = valid, entry is valid. (work item is not yet executed). ipoib_create_ah() rdma_create_ah() rdma_get_gid_attr() <-- Tries to acquire gid_attr which has refcnt = 0. This is incorrect. GID entry state and entry pointer is provides the accurate GID enty state. Such fields must be updated with rwlock to protect against readers and, such fields must be in sane state before refcount can drop to zero. Otherwise above race condition can happen leading to use-after-free situation. Following backtrace has been observed when cache update for an IB port is triggered while IPoIB ULP is creating an AH. Therefore, when updating GID entry, first mark a valid entry as invalid through state and set the barrier so that no callers can acquired the GID entry, followed by release reference to it. refcount_t: increment on 0; use-after-free. WARNING: CPU: 4 PID: 29106 at lib/refcount.c:153 refcount_inc_checked+0x30/0x50 Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core] RIP: 0010:refcount_inc_checked+0x30/0x50 RSP: 0018:ffff8802ad36f600 EFLAGS: 00010082 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000008 RDI: ffffffff86710100 RBP: ffff8802d6e60a30 R08: ffffed005d67bf8b R09: ffffed005d67bf8b R10: 0000000000000001 R11: ffffed005d67bf8a R12: ffff88027620cee8 R13: ffff8802d6e60988 R14: ffff8802d6e60a78 R15: 0000000000000202 FS: 0000000000000000(0000) GS:ffff8802eb200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3ab35e5c88 CR3: 00000002ce84a000 CR4: 00000000000006e0 IPv6: ADDRCONF(NETDEV_CHANGE): ib1: link becomes ready Call Trace: rdma_get_gid_attr+0x220/0x310 [ib_core] ? lock_acquire+0x145/0x3a0 rdma_fill_sgid_attr+0x32c/0x470 [ib_core] rdma_create_ah+0x89/0x160 [ib_core] ? rdma_fill_sgid_attr+0x470/0x470 [ib_core] ? ipoib_create_ah+0x52/0x260 [ib_ipoib] ipoib_create_ah+0xf5/0x260 [ib_ipoib] ipoib_mcast_join_complete+0xbbe/0x2540 [ib_ipoib] Fixes: b150c386 ("IB/core: Introduce GID entry reference counts") Signed-off-by: NParav Pandit <parav@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Yishai Hadas 提交于
Upon DEVX object creation the object must be destroyed upon a follows error flow. Fixes: 7efce369 ("IB/mlx5: Add obj create and destroy functionality") Signed-off-by: NYishai Hadas <yishaih@mellanox.com> Reviewed-by: NArtemy Kovalyov <artemyko@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Mark Bloch 提交于
Make sure we free struct uverbs_api once we clean the radix tree. It was allocated by uverbs_alloc_api(). Fixes: 9ed3e5f4 ("IB/uverbs: Build the specs into a radix tree at runtime") Reported-by: NBart Van Assche <bvanassche@acm.org> Signed-off-by: NMark Bloch <markb@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
- 25 9月, 2018 3 次提交
-
-
由 Lu Baolu 提交于
Pasid table memory allocation could return failure due to memory shortage. Limit the pasid table size to 1MiB because current 8MiB contiguous physical memory allocation can be hard to come by. W/o a PASID table, the device could continue to work with only shared virtual memory impacted. So, let's go ahead with context mapping even the memory allocation for pasid table failed. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107783 Fixes: cc580e41 ("iommu/vt-d: Per PCI device pasid table interfaces") Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Reported-and-tested-by: NPelton Kyle D <kyle.d.pelton@intel.com> Tested-by: NMika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: NLu Baolu <baolu.lu@linux.intel.com> Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
由 Heiko Stuebner 提交于
In the iommu's shutdown handler we disable runtime-pm which could result in the irq-handler running unclocked and since commit 3fc7c5c0 ("iommu/rockchip: Handle errors returned from PM framework") we warn about that fact. This can cause warnings on shutdown on some Rockchip machines, so free the irqs in the shutdown handler before we disable runtime-pm. Reported-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com> Fixes: 3fc7c5c0 ("iommu/rockchip: Handle errors returned from PM framework") Signed-off-by: NHeiko Stuebner <heiko@sntech.de> Tested-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NJoerg Roedel <jroedel@suse.de>
-
由 Antoine Tenart 提交于
With CONFIG_DMA_API_DEBUG enabled we get DMA unmapping warning in various places of the mvneta driver, for example when putting down an interface while traffic is passing through. The issue is when using s/w buffer management, the Rx buffers are mapped using dma_map_page but unmapped with dma_unmap_single. This patch fixes this by using the right unmapping function. Fixes: 562e2f46 ("net: mvneta: Improve the buffer allocation method for SWBM") Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: NGregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 9月, 2018 16 次提交
-
-
由 Selvin Xavier 提交于
bnxt_re_ib_reg acquires and releases the rtnl lock whenever it accesses the L2 driver. The following sequence can trigger a crash Acquires the rtnl_lock -> Registers roce driver callback with L2 driver -> release the rtnl lock bnxt_re acquires the rtnl_lock -> Request for MSIx vectors -> release the rtnl_lock Issue happens when bnxt_re proceeds with remaining part of initialization and L2 driver invokes bnxt_ulp_irq_stop as a part of bnxt_open_nic. The crash is in bnxt_qplib_nq_stop_irq as the NQ structures are not initialized yet, <snip> [ 3551.726647] BUG: unable to handle kernel NULL pointer dereference at (null) [ 3551.726656] IP: [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.726674] PGD 0 [ 3551.726679] Oops: 0002 1 SMP ... [ 3551.726822] Hardware name: Dell Inc. PowerEdge R720/08RW36, BIOS 2.4.3 07/09/2014 [ 3551.726826] task: ffff97e30eec5ee0 ti: ffff97e3173bc000 task.ti: ffff97e3173bc000 [ 3551.726829] RIP: 0010:[<ffffffffc0840ee9>] [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] ... [ 3551.726872] Call Trace: [ 3551.726886] [<ffffffffc082cb9e>] bnxt_re_stop_irq+0x4e/0x70 [bnxt_re] [ 3551.726899] [<ffffffffc07d6a53>] bnxt_ulp_irq_stop+0x43/0x70 [bnxt_en] [ 3551.726908] [<ffffffffc07c82f4>] bnxt_reserve_rings+0x174/0x1e0 [bnxt_en] [ 3551.726917] [<ffffffffc07cafd8>] __bnxt_open_nic+0x368/0x9a0 [bnxt_en] [ 3551.726925] [<ffffffffc07cb62b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 3551.726934] [<ffffffffc07cc62f>] bnxt_setup_mq_tc+0x11f/0x260 [bnxt_en] [ 3551.726943] [<ffffffffc07d5f58>] bnxt_dcbnl_ieee_setets+0xb8/0x1f0 [bnxt_en] [ 3551.726954] [<ffffffff890f983a>] dcbnl_ieee_set+0x9a/0x250 [ 3551.726966] [<ffffffff88fd6d21>] ? __alloc_skb+0xa1/0x2d0 [ 3551.726972] [<ffffffff890f72fa>] dcb_doit+0x13a/0x210 [ 3551.726981] [<ffffffff89003ff7>] rtnetlink_rcv_msg+0xa7/0x260 [ 3551.726989] [<ffffffff88ffdb00>] ? rtnl_unicast+0x20/0x30 [ 3551.726996] [<ffffffff88bf9dc8>] ? __kmalloc_node_track_caller+0x58/0x290 [ 3551.727002] [<ffffffff890f7326>] ? dcb_doit+0x166/0x210 [ 3551.727007] [<ffffffff88fd6d0d>] ? __alloc_skb+0x8d/0x2d0 [ 3551.727012] [<ffffffff89003f50>] ? rtnl_newlink+0x880/0x880 ... [ 3551.727104] [<ffffffff8911f7d5>] system_call_fastpath+0x1c/0x21 ... [ 3551.727164] RIP [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.727175] RSP <ffff97e3173bf788> [ 3551.727177] CR2: 0000000000000000 Avoid this inconsistent state and system crash by acquiring the rtnl lock for the entire duration of device initialization. Re-factor the code to remove the rtnl lock from the individual function and acquire and release it from the caller. Fixes: 1ac5a404 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b103 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Friedemann Gerold 提交于
This patch fixes skb_shared area, which will be corrupted upon reception of 4K jumbo packets. Originally build_skb usage purpose was to reuse page for skb to eliminate needs of extra fragments. But that logic does not take into account that skb_shared_info should be reserved at the end of skb data area. In case packet data consumes all the page (4K), skb_shinfo location overflows the page. As a consequence, __build_skb zeroed shinfo data above the allocated page, corrupting next page. The issue is rarely seen in real life because jumbo are normally larger than 4K and that causes another code path to trigger. But it 100% reproducible with simple scapy packet, like: sendp(IP(dst="192.168.100.3") / TCP(dport=443) \ / Raw(RandString(size=(4096-40))), iface="enp1s0") Fixes: 018423e9 ("net: ethernet: aquantia: Add ring support code") Reported-by: NFriedemann Gerold <f.gerold@b-c-s.de> Reported-by: NMichael Rauch <michael@rauch.be> Signed-off-by: NFriedemann Gerold <f.gerold@b-c-s.de> Tested-by: NNikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: NIgor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. tun uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. nfp uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com> Tested-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. bnxt uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. bnx2x uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. mlx5 uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. mlx4 uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. i40evf uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ice uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. igb uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ixgb uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. This also removes a problematic use of disable_irq() in a context it is forbidden, as explained in commit af3e0fcf ("8139too: Use disable_irq_nosync() in rtl8139_poll_controller()") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture lasts for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. fm10k uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ixgbevf uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ixgbe uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Reported-by: NSong Liu <songliubraving@fb.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Tested-by: NSong Liu <songliubraving@fb.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
We want to allow NAPI drivers to no longer provide ndo_poll_controller() method, as it has been proven problematic. team driver must not look at its presence, but instead call netpoll_poll_dev() which factorize the needed actions. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Acked-by: NJay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 9月, 2018 1 次提交
-
-
由 Dave Jiang 提交于
With address_space_operations missing for device dax, namely the .set_page_dirty, we hit a kernel warning when running destructive ndctl unit test: make TESTS=device-dax check WARNING: CPU: 3 PID: 7380 at fs/buffer.c:581 __set_page_dirty+0xb1/0xc0 Setting address_space_operations to noop_set_page_dirty and noop_invalidatepage for device dax to prevent fallback to __set_page_dirty_buffers() and block_invalidatepage() respectively. Fixes: 2232c638 ("device-dax: Enable page_mapping()") Acked-by: NJeff Moyer <jmoyer@redhat.com> Reported-by: NVishal Verma <vishal.l.verma@intel.com> Signed-off-by: NDave Jiang <dave.jiang@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
- 22 9月, 2018 10 次提交
-
-
由 Nathan Chancellor 提交于
Clang warns that the address of a pointer will always evaluated as true in a boolean context: drivers/net/ethernet/mellanox/mlx4/eq.c:243:11: warning: address of array 'eq->affinity_mask' will always evaluate to 'true' [-Wpointer-bool-conversion] if (!eq->affinity_mask || cpumask_empty(eq->affinity_mask)) ~~~~~^~~~~~~~~~~~~ 1 warning generated. Use cpumask_available, introduced in commit f7e30f01 ("cpumask: Add helper cpumask_available()"), which does the proper checking and avoids this warning. Link: https://github.com/ClangBuiltLinux/linux/issues/86Signed-off-by: NNathan Chancellor <natechancellor@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YueHaibing 提交于
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YueHaibing 提交于
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YueHaibing 提交于
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YueHaibing 提交于
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YueHaibing 提交于
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YueHaibing 提交于
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
In case of error, the function pci_create_slot() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: a15f2c08 ("PCI: hv: support reporting serial number as slot information") Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Thumshirn 提交于
When sd_init_command() get's a command with a unknown req_op() it crashes the system via BUG(). This makes debugging the actual reason for the broken request cmd_flags pretty hard as the system is down before it's able to write out debugging data on the serial console or the trace buffer. Change the BUG() to a WARN_ON() and return BLKPREP_KILL to fail gracefully and return an I/O error to the producer of the request. Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NBart Van Assche <bvanassche@acm.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 Wen Xiong 提交于
While dlpar adding primary ipr adapter back, driver goes through adapter initialization then schedule ipr_worker_thread to start te disk scan by dropping the host lock, calling scsi_add_device. Then get the adapter reset request again, so driver does scsi_block_requests, this will cause the scsi_add_device get hung until we unblock. But we can't run ipr_worker_thread to do the unblock because its stuck in scsi_add_device. This patch fixes the issue. [mkp: typo and whitespace fixes] Signed-off-by: NWen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: NBrian King <brking@linux.vnet.ibm.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-